<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE eagle SYSTEM "eagle.dtd">
<eagle version="6.5.0">
<drawing>
<board>
<plain>
<wire x1="1.27" y1="0" x2="22.86" y2="0" width="0" layer="20"/>
<wire x1="22.86" y1="0" x2="24.13" y2="1.27" width="0" layer="20"/>
<wire x1="24.13" y1="1.27" x2="24.13" y2="52.07" width="0" layer="20"/>
<wire x1="24.13" y1="52.07" x2="22.86" y2="53.34" width="0" layer="20"/>
<wire x1="22.86" y1="53.34" x2="1.27" y2="53.34" width="0" layer="20"/>
<wire x1="1.27" y1="53.34" x2="0" y2="52.07" width="0" layer="20"/>
<wire x1="0" y1="52.07" x2="0" y2="1.27" width="0" layer="20"/>
<wire x1="0" y1="1.27" x2="1.27" y2="0" width="0" layer="20"/>
<text>TashTalk 2 Hat</text>
<text>JLCJLCJLCJLC</text>
<text>TashTalk</text>
<text>FW Ver 2.x</text>
<text>Rev 0</text>
<text>RS422</text>
<text>Transceiver</text>
</plain>
<libraries>
<library name="SparkFun-Connectors">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find connectors and sockets- basically anything that can be plugged into or onto.&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ 
&lt;br&gt;&lt;br&gt;
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="2X20">
</package>
</packages>
</library>
<library name="con-yamaichi">
<description>&lt;b&gt;Yamaichi Connectors&lt;/b&gt;&lt;p&gt;
Mini-DIN, USB, Fire Wire&lt;br&gt;
DIN female/male, etc.&lt;p&gt;
&lt;author&gt;Created by librarian@cadsoft.de&lt;/author&gt;</description>
<packages>
<package name="SSV-BC08">
<description>&lt;b&gt;Mini Din&lt;/b&gt; YAMAICHI CONNECTOR</description>
</package>
</packages>
</library>
<library name="microchip">
<description>&lt;b&gt;Microchip PIC Microcontrollers and other Devices&lt;/b&gt;&lt;p&gt;
Based on the following sources :
&lt;ul&gt;
&lt;li&gt;Microchip Data Book, 1993
&lt;li&gt;THE EMERGING WORLD STANDARD, 1995/1996
&lt;li&gt;Microchip, Technical Library CD-ROM, June 1998
&lt;li&gt;www.microchip.com
&lt;/ul&gt;
&lt;author&gt;Created by librarian@cadsoft.de&lt;/author&gt;</description>
<packages>
<package name="DIL8">
<description>&lt;B&gt;Dual In Line&lt;/B&gt;&lt;p&gt;
package type P</description>
</package>
</packages>
</library>
<library name="SparkFun-Capacitors">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find resistors, capacitors, inductors, test points, jumper pads, etc.&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ 
&lt;br&gt;&lt;br&gt;
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="CPOL-RADIAL-10UF-25V">
</package>
</packages>
</library>
<library name="SparkFun-Passives">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find resistors, capacitors, inductors, test points, jumper pads, etc.&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ 
&lt;br&gt;&lt;br&gt;
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="AXIAL-0.4">
<description>1/4W Resistor, 0.4" wide&lt;p&gt;

Yageo CFR series &lt;a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf"&gt;http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf&lt;/a&gt;</description>
</package>
</packages>
</library>
</libraries>
<attributes>
</attributes>
<variantdefs>
</variantdefs>
<elements>
<element name="E$1" library="SparkFun-Connectors" package="2X20" value="">
<attribute name="VALUE"/>
</element>
<element name="E$2" library="con-yamaichi" package="SSV-BC08" value="">
<attribute name="VALUE"/>
</element>
<element name="E$3" library="microchip" package="DIL8" value="">
<attribute name="VALUE"/>
</element>
<element name="E$4" library="microchip" package="DIL8" value="">
<attribute name="VALUE"/>
</element>
<element name="E$5" library="SparkFun-Capacitors" package="CPOL-RADIAL-10UF-25V" value="">
<attribute name="VALUE"/>
</element>
<element name="E$6" library="SparkFun-Passives" package="AXIAL-0.4" value="">
<attribute name="VALUE"/>
</element>
</elements>
<signals>
<signal name="S$1">
<contactref element="E$4" pad="5"/>
<contactref element="E$1" pad="36"/>
</signal>
<signal name="S$2">
<contactref element="E$1" pad="8"/>
<contactref element="E$4" pad="6"/>
</signal>
<signal name="S$3">
<contactref element="E$4" pad="7"/>
<contactref element="E$1" pad="10"/>
</signal>
<signal name="S$4">
<contactref element="E$4" pad="8"/>
<contactref element="E$1" pad="6"/>
<contactref element="E$5" pad="2"/>
<contactref element="E$3" pad="5"/>
<contactref element="E$2" pad="4"/>
<contactref element="E$1" pad="9"/>
<contactref element="E$1" pad="14"/>
<contactref element="E$1" pad="20"/>
<contactref element="E$1" pad="25"/>
<contactref element="E$1" pad="30"/>
<contactref element="E$1" pad="34"/>
<contactref element="E$1" pad="39"/>
</signal>
<signal name="S$5">
<contactref element="E$5" pad="1"/>
<contactref element="E$4" pad="1"/>
<contactref element="E$1" pad="1"/>
<contactref element="E$3" pad="8"/>
<contactref element="E$6" pad="P$2"/>
</signal>
<signal name="S$6">
<contactref element="E$3" pad="2"/>
<contactref element="E$3" pad="3"/>
<contactref element="E$4" pad="3"/>
</signal>
<signal name="S$7">
<contactref element="E$3" pad="1"/>
<contactref element="E$4" pad="2"/>
<contactref element="E$3" pad="4"/>
</signal>
<signal name="S$8">
<contactref element="E$4" pad="4"/>
<contactref element="E$6" pad="P$1"/>
</signal>
<signal name="S$9">
<contactref element="E$2" pad="6"/>
<contactref element="E$2" pad="8"/>
<contactref element="E$3" pad="6"/>
</signal>
<signal name="S$10">
<contactref element="E$2" pad="3"/>
<contactref element="E$3" pad="7"/>
<contactref element="E$2" pad="5"/>
</signal>
</signals>
</board>
</drawing>
</eagle>
