tenfourfox/netwerk/base/nsInputStreamPump.cpp

768 lines
25 KiB
C++
Raw Normal View History

2017-04-19 07:56:45 +00:00
/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/* vim:set ts=4 sts=4 sw=4 et cin: */
/* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/. */
#include "nsIOService.h"
#include "nsInputStreamPump.h"
#include "nsIStreamTransportService.h"
#include "nsISeekableStream.h"
#include "nsITransport.h"
#include "nsIThreadRetargetableStreamListener.h"
#include "nsThreadUtils.h"
#include "nsCOMPtr.h"
#include "mozilla/Logging.h"
#include "GeckoProfiler.h"
#include "nsIStreamListener.h"
#include "nsILoadGroup.h"
#include "nsNetCID.h"
#include <algorithm>
static NS_DEFINE_CID(kStreamTransportServiceCID, NS_STREAMTRANSPORTSERVICE_CID);
//
// NSPR_LOG_MODULES=nsStreamPump:5
//
static mozilla::LazyLogModule gStreamPumpLog("nsStreamPump");
#undef LOG
#define LOG(args) MOZ_LOG(gStreamPumpLog, mozilla::LogLevel::Debug, args)
//-----------------------------------------------------------------------------
// nsInputStreamPump methods
//-----------------------------------------------------------------------------
nsInputStreamPump::nsInputStreamPump()
: mState(STATE_IDLE)
, mStreamOffset(0)
, mStreamLength(UINT64_MAX)
, mStatus(NS_OK)
, mSuspendCount(0)
, mLoadFlags(LOAD_NORMAL)
, mProcessingCallbacks(false)
, mWaitingForInputStreamReady(false)
, mCloseWhenDone(false)
, mRetargeting(false)
, mMonitor("nsInputStreamPump")
{
}
nsInputStreamPump::~nsInputStreamPump()
{
}
nsresult
nsInputStreamPump::Create(nsInputStreamPump **result,
nsIInputStream *stream,
int64_t streamPos,
int64_t streamLen,
uint32_t segsize,
uint32_t segcount,
bool closeWhenDone)
{
nsresult rv = NS_ERROR_OUT_OF_MEMORY;
RefPtr<nsInputStreamPump> pump = new nsInputStreamPump();
if (pump) {
rv = pump->Init(stream, streamPos, streamLen,
segsize, segcount, closeWhenDone);
if (NS_SUCCEEDED(rv)) {
*result = nullptr;
pump.swap(*result);
}
}
return rv;
}
struct PeekData {
PeekData(nsInputStreamPump::PeekSegmentFun fun, void* closure)
: mFunc(fun), mClosure(closure) {}
nsInputStreamPump::PeekSegmentFun mFunc;
void* mClosure;
};
static NS_METHOD
CallPeekFunc(nsIInputStream *aInStream, void *aClosure,
const char *aFromSegment, uint32_t aToOffset, uint32_t aCount,
uint32_t *aWriteCount)
{
NS_ASSERTION(aToOffset == 0, "Called more than once?");
NS_ASSERTION(aCount > 0, "Called without data?");
PeekData* data = static_cast<PeekData*>(aClosure);
data->mFunc(data->mClosure,
reinterpret_cast<const uint8_t*>(aFromSegment), aCount);
return NS_BINDING_ABORTED;
}
nsresult
nsInputStreamPump::PeekStream(PeekSegmentFun callback, void* closure)
{
ReentrantMonitorAutoEnter mon(mMonitor);
NS_ASSERTION(mAsyncStream, "PeekStream called without stream");
// See if the pipe is closed by checking the return of Available.
uint64_t dummy64;
nsresult rv = mAsyncStream->Available(&dummy64);
if (NS_FAILED(rv))
return rv;
uint32_t dummy = (uint32_t)std::min(dummy64, (uint64_t)UINT32_MAX);
PeekData data(callback, closure);
return mAsyncStream->ReadSegments(CallPeekFunc,
&data,
nsIOService::gDefaultSegmentSize,
&dummy);
}
nsresult
nsInputStreamPump::EnsureWaiting()
{
mMonitor.AssertCurrentThreadIn();
// no need to worry about multiple threads... an input stream pump lives
// on only one thread at a time.
MOZ_ASSERT(mAsyncStream);
if (!mWaitingForInputStreamReady && !mProcessingCallbacks) {
// Ensure OnStateStop is called on the main thread.
if (mState == STATE_STOP) {
nsCOMPtr<nsIThread> mainThread = do_GetMainThread();
if (mTargetThread != mainThread) {
mTargetThread = do_QueryInterface(mainThread);
}
}
MOZ_ASSERT(mTargetThread);
nsresult rv = mAsyncStream->AsyncWait(this, 0, 0, mTargetThread);
if (NS_FAILED(rv)) {
NS_ERROR("AsyncWait failed");
return rv;
}
// Any retargeting during STATE_START or START_TRANSFER is complete
// after the call to AsyncWait; next callback wil be on mTargetThread.
mRetargeting = false;
mWaitingForInputStreamReady = true;
}
return NS_OK;
}
//-----------------------------------------------------------------------------
// nsInputStreamPump::nsISupports
//-----------------------------------------------------------------------------
// although this class can only be accessed from one thread at a time, we do
// allow its ownership to move from thread to thread, assuming the consumer
// understands the limitations of this.
NS_IMPL_ISUPPORTS(nsInputStreamPump,
nsIRequest,
nsIThreadRetargetableRequest,
nsIInputStreamCallback,
nsIInputStreamPump)
//-----------------------------------------------------------------------------
// nsInputStreamPump::nsIRequest
//-----------------------------------------------------------------------------
NS_IMETHODIMP
nsInputStreamPump::GetName(nsACString &result)
{
ReentrantMonitorAutoEnter mon(mMonitor);
result.Truncate();
return NS_OK;
}
NS_IMETHODIMP
nsInputStreamPump::IsPending(bool *result)
{
ReentrantMonitorAutoEnter mon(mMonitor);
*result = (mState != STATE_IDLE);
return NS_OK;
}
NS_IMETHODIMP
nsInputStreamPump::GetStatus(nsresult *status)
{
ReentrantMonitorAutoEnter mon(mMonitor);
*status = mStatus;
return NS_OK;
}
NS_IMETHODIMP
nsInputStreamPump::Cancel(nsresult status)
{
MOZ_ASSERT(NS_IsMainThread());
ReentrantMonitorAutoEnter mon(mMonitor);
LOG(("nsInputStreamPump::Cancel [this=%p status=%x]\n",
this, status));
if (NS_FAILED(mStatus)) {
LOG((" already canceled\n"));
return NS_OK;
}
NS_ASSERTION(NS_FAILED(status), "cancel with non-failure status code");
mStatus = status;
// close input stream
if (mAsyncStream) {
mAsyncStream->CloseWithStatus(status);
if (mSuspendCount == 0)
EnsureWaiting();
// Otherwise, EnsureWaiting will be called by Resume().
// Note that while suspended, OnInputStreamReady will
// not do anything, and also note that calling asyncWait
// on a closed stream works and will dispatch an event immediately.
}
return NS_OK;
}
NS_IMETHODIMP
nsInputStreamPump::Suspend()
{
ReentrantMonitorAutoEnter mon(mMonitor);
LOG(("nsInputStreamPump::Suspend [this=%p]\n", this));
NS_ENSURE_TRUE(mState != STATE_IDLE, NS_ERROR_UNEXPECTED);
++mSuspendCount;
return NS_OK;
}
NS_IMETHODIMP
nsInputStreamPump::Resume()
{
ReentrantMonitorAutoEnter mon(mMonitor);
LOG(("nsInputStreamPump::Resume [this=%p]\n", this));
NS_ENSURE_TRUE(mSuspendCount > 0, NS_ERROR_UNEXPECTED);
NS_ENSURE_TRUE(mState != STATE_IDLE, NS_ERROR_UNEXPECTED);
if (--mSuspendCount == 0)
EnsureWaiting();
return NS_OK;
}
NS_IMETHODIMP
nsInputStreamPump::GetLoadFlags(nsLoadFlags *aLoadFlags)
{
ReentrantMonitorAutoEnter mon(mMonitor);
*aLoadFlags = mLoadFlags;
return NS_OK;
}
NS_IMETHODIMP
nsInputStreamPump::SetLoadFlags(nsLoadFlags aLoadFlags)
{
ReentrantMonitorAutoEnter mon(mMonitor);
mLoadFlags = aLoadFlags;
return NS_OK;
}
NS_IMETHODIMP
nsInputStreamPump::GetLoadGroup(nsILoadGroup **aLoadGroup)
{
ReentrantMonitorAutoEnter mon(mMonitor);
NS_IF_ADDREF(*aLoadGroup = mLoadGroup);
return NS_OK;
}
NS_IMETHODIMP
nsInputStreamPump::SetLoadGroup(nsILoadGroup *aLoadGroup)
{
ReentrantMonitorAutoEnter mon(mMonitor);
mLoadGroup = aLoadGroup;
return NS_OK;
}
//-----------------------------------------------------------------------------
// nsInputStreamPump::nsIInputStreamPump implementation
//-----------------------------------------------------------------------------
NS_IMETHODIMP
nsInputStreamPump::Init(nsIInputStream *stream,
int64_t streamPos, int64_t streamLen,
uint32_t segsize, uint32_t segcount,
bool closeWhenDone)
{
NS_ENSURE_TRUE(mState == STATE_IDLE, NS_ERROR_IN_PROGRESS);
mStreamOffset = uint64_t(streamPos);
if (int64_t(streamLen) >= int64_t(0))
mStreamLength = uint64_t(streamLen);
mStream = stream;
mSegSize = segsize;
mSegCount = segcount;
mCloseWhenDone = closeWhenDone;
return NS_OK;
}
NS_IMETHODIMP
nsInputStreamPump::AsyncRead(nsIStreamListener *listener, nsISupports *ctxt)
{
ReentrantMonitorAutoEnter mon(mMonitor);
NS_ENSURE_TRUE(mState == STATE_IDLE, NS_ERROR_IN_PROGRESS);
NS_ENSURE_ARG_POINTER(listener);
MOZ_ASSERT(NS_IsMainThread(), "nsInputStreamPump should be read from the "
"main thread only.");
//
// OK, we need to use the stream transport service if
//
// (1) the stream is blocking
// (2) the stream does not support nsIAsyncInputStream
//
bool nonBlocking;
nsresult rv = mStream->IsNonBlocking(&nonBlocking);
if (NS_FAILED(rv)) return rv;
if (nonBlocking) {
mAsyncStream = do_QueryInterface(mStream);
//
// if the stream supports nsIAsyncInputStream, and if we need to seek
// to a starting offset, then we must do so here. in the non-async
// stream case, the stream transport service will take care of seeking
// for us.
//
if (mAsyncStream && (mStreamOffset != UINT64_MAX)) {
nsCOMPtr<nsISeekableStream> seekable = do_QueryInterface(mStream);
if (seekable)
seekable->Seek(nsISeekableStream::NS_SEEK_SET, mStreamOffset);
}
}
if (!mAsyncStream) {
// ok, let's use the stream transport service to read this stream.
nsCOMPtr<nsIStreamTransportService> sts =
do_GetService(kStreamTransportServiceCID, &rv);
if (NS_FAILED(rv)) return rv;
nsCOMPtr<nsITransport> transport;
rv = sts->CreateInputTransport(mStream, mStreamOffset, mStreamLength,
mCloseWhenDone, getter_AddRefs(transport));
if (NS_FAILED(rv)) return rv;
nsCOMPtr<nsIInputStream> wrapper;
rv = transport->OpenInputStream(0, mSegSize, mSegCount, getter_AddRefs(wrapper));
if (NS_FAILED(rv)) return rv;
mAsyncStream = do_QueryInterface(wrapper, &rv);
if (NS_FAILED(rv)) return rv;
}
// release our reference to the original stream. from this point forward,
// we only reference the "stream" via mAsyncStream.
mStream = 0;
// mStreamOffset now holds the number of bytes currently read. we use this
// to enforce the mStreamLength restriction.
mStreamOffset = 0;
// grab event queue (we must do this here by contract, since all notifications
// must go to the thread which called AsyncRead)
mTargetThread = do_GetCurrentThread();
NS_ENSURE_STATE(mTargetThread);
rv = EnsureWaiting();
if (NS_FAILED(rv)) return rv;
if (mLoadGroup)
mLoadGroup->AddRequest(this, nullptr);
mState = STATE_START;
mListener = listener;
mListenerContext = ctxt;
return NS_OK;
}
//-----------------------------------------------------------------------------
// nsInputStreamPump::nsIInputStreamCallback implementation
//-----------------------------------------------------------------------------
NS_IMETHODIMP
nsInputStreamPump::OnInputStreamReady(nsIAsyncInputStream *stream)
{
LOG(("nsInputStreamPump::OnInputStreamReady [this=%p]\n", this));
PROFILER_LABEL("nsInputStreamPump", "OnInputStreamReady",
js::ProfileEntry::Category::NETWORK);
// this function has been called from a PLEvent, so we can safely call
// any listener or progress sink methods directly from here.
for (;;) {
// There should only be one iteration of this loop happening at a time.
// To prevent AsyncWait() (called during callbacks or on other threads)
// from creating a parallel OnInputStreamReady(), we use:
// -- a monitor; and
// -- a boolean mProcessingCallbacks to detect parallel loops
// when exiting the monitor for callbacks.
ReentrantMonitorAutoEnter lock(mMonitor);
// Prevent parallel execution during callbacks, while out of monitor.
if (mProcessingCallbacks) {
MOZ_ASSERT(!mProcessingCallbacks);
break;
}
mProcessingCallbacks = true;
if (mSuspendCount || mState == STATE_IDLE) {
mWaitingForInputStreamReady = false;
mProcessingCallbacks = false;
break;
}
uint32_t nextState;
switch (mState) {
case STATE_START:
nextState = OnStateStart();
break;
case STATE_TRANSFER:
nextState = OnStateTransfer();
break;
case STATE_STOP:
mRetargeting = false;
nextState = OnStateStop();
break;
default:
nextState = 0;
NS_NOTREACHED("Unknown enum value.");
return NS_ERROR_UNEXPECTED;
}
bool stillTransferring = (mState == STATE_TRANSFER &&
nextState == STATE_TRANSFER);
if (stillTransferring) {
NS_ASSERTION(NS_SUCCEEDED(mStatus),
"Should not have failed status for ongoing transfer");
} else {
NS_ASSERTION(mState != nextState,
"Only OnStateTransfer can be called more than once.");
}
if (mRetargeting) {
NS_ASSERTION(mState != STATE_STOP,
"Retargeting should not happen during OnStateStop.");
}
// Set mRetargeting so EnsureWaiting will be called. It ensures that
// OnStateStop is called on the main thread.
if (nextState == STATE_STOP && !NS_IsMainThread()) {
mRetargeting = true;
}
// Unset mProcessingCallbacks here (while we have lock) so our own call to
// EnsureWaiting isn't blocked by it.
mProcessingCallbacks = false;
// We must break the loop when we're switching event delivery to another
// thread and the input stream pump is suspended, otherwise
// OnStateStop() might be called off the main thread. See bug 1026951
// comment #107 for the exact scenario.
if (mSuspendCount && mRetargeting) {
mState = nextState;
mWaitingForInputStreamReady = false;
break;
}
// Wait asynchronously if there is still data to transfer, or we're
// switching event delivery to another thread.
if (!mSuspendCount && (stillTransferring || mRetargeting)) {
mState = nextState;
mWaitingForInputStreamReady = false;
nsresult rv = EnsureWaiting();
if (NS_SUCCEEDED(rv))
break;
// Failure to start asynchronous wait: stop transfer.
// Do not set mStatus if it was previously set to report a failure.
if (NS_SUCCEEDED(mStatus)) {
mStatus = rv;
}
nextState = STATE_STOP;
}
mState = nextState;
}
return NS_OK;
}
uint32_t
nsInputStreamPump::OnStateStart()
{
mMonitor.AssertCurrentThreadIn();
PROFILER_LABEL("nsInputStreamPump", "OnStateStart",
js::ProfileEntry::Category::NETWORK);
LOG((" OnStateStart [this=%p]\n", this));
nsresult rv;
// need to check the reason why the stream is ready. this is required
// so our listener can check our status from OnStartRequest.
// XXX async streams should have a GetStatus method!
if (NS_SUCCEEDED(mStatus)) {
uint64_t avail;
rv = mAsyncStream->Available(&avail);
if (NS_FAILED(rv) && rv != NS_BASE_STREAM_CLOSED)
mStatus = rv;
}
{
// Note: Must exit monitor for call to OnStartRequest to avoid
// deadlocks when calls to RetargetDeliveryTo for multiple
// nsInputStreamPumps are needed (e.g. nsHttpChannel).
mMonitor.Exit();
rv = mListener->OnStartRequest(this, mListenerContext);
mMonitor.Enter();
}
// an error returned from OnStartRequest should cause us to abort; however,
// we must not stomp on mStatus if already canceled.
if (NS_FAILED(rv) && NS_SUCCEEDED(mStatus))
mStatus = rv;
return NS_SUCCEEDED(mStatus) ? STATE_TRANSFER : STATE_STOP;
}
uint32_t
nsInputStreamPump::OnStateTransfer()
{
mMonitor.AssertCurrentThreadIn();
PROFILER_LABEL("nsInputStreamPump", "OnStateTransfer",
js::ProfileEntry::Category::NETWORK);
LOG((" OnStateTransfer [this=%p]\n", this));
// if canceled, go directly to STATE_STOP...
if (NS_FAILED(mStatus))
return STATE_STOP;
nsresult rv;
uint64_t avail;
rv = mAsyncStream->Available(&avail);
LOG((" Available returned [stream=%x rv=%x avail=%llu]\n", mAsyncStream.get(), rv, avail));
if (rv == NS_BASE_STREAM_CLOSED) {
rv = NS_OK;
avail = 0;
}
else if (NS_SUCCEEDED(rv) && avail) {
// figure out how much data to report (XXX detect overflow??)
if (avail > mStreamLength - mStreamOffset)
avail = mStreamLength - mStreamOffset;
if (avail) {
// we used to limit avail to 16K - we were afraid some ODA handlers
// might assume they wouldn't get more than 16K at once
// we're removing that limit since it speeds up local file access.
// Now there's an implicit 64K limit of 4 16K segments
// NOTE: ok, so the story is as follows. OnDataAvailable impls
// are by contract supposed to consume exactly |avail| bytes.
// however, many do not... mailnews... stream converters...
// cough, cough. the input stream pump is fairly tolerant
// in this regard; however, if an ODA does not consume any
// data from the stream, then we could potentially end up in
// an infinite loop. we do our best here to try to catch
// such an error. (see bug 189672)
// in most cases this QI will succeed (mAsyncStream is almost always
// a nsPipeInputStream, which implements nsISeekableStream::Tell).
int64_t offsetBefore;
nsCOMPtr<nsISeekableStream> seekable = do_QueryInterface(mAsyncStream);
if (seekable && NS_FAILED(seekable->Tell(&offsetBefore))) {
NS_NOTREACHED("Tell failed on readable stream");
offsetBefore = 0;
}
uint32_t odaAvail =
avail > UINT32_MAX ?
UINT32_MAX : uint32_t(avail);
LOG((" calling OnDataAvailable [offset=%llu count=%llu(%u)]\n",
mStreamOffset, avail, odaAvail));
{
// Note: Must exit monitor for call to OnStartRequest to avoid
// deadlocks when calls to RetargetDeliveryTo for multiple
// nsInputStreamPumps are needed (e.g. nsHttpChannel).
mMonitor.Exit();
rv = mListener->OnDataAvailable(this, mListenerContext,
mAsyncStream, mStreamOffset,
odaAvail);
mMonitor.Enter();
}
// don't enter this code if ODA failed or called Cancel
if (NS_SUCCEEDED(rv) && NS_SUCCEEDED(mStatus)) {
// test to see if this ODA failed to consume data
if (seekable) {
// NOTE: if Tell fails, which can happen if the stream is
// now closed, then we assume that everything was read.
int64_t offsetAfter;
if (NS_FAILED(seekable->Tell(&offsetAfter)))
offsetAfter = offsetBefore + odaAvail;
if (offsetAfter > offsetBefore)
mStreamOffset += (offsetAfter - offsetBefore);
else if (mSuspendCount == 0) {
//
// possible infinite loop if we continue pumping data!
//
// NOTE: although not allowed by nsIStreamListener, we
// will allow the ODA impl to Suspend the pump. IMAP
// does this :-(
//
NS_ERROR("OnDataAvailable implementation consumed no data");
mStatus = NS_ERROR_UNEXPECTED;
}
}
else
mStreamOffset += odaAvail; // assume ODA behaved well
}
}
}
// an error returned from Available or OnDataAvailable should cause us to
// abort; however, we must not stomp on mStatus if already canceled.
if (NS_SUCCEEDED(mStatus)) {
if (NS_FAILED(rv))
mStatus = rv;
else if (avail) {
// if stream is now closed, advance to STATE_STOP right away.
// Available may return 0 bytes available at the moment; that
// would not mean that we are done.
// XXX async streams should have a GetStatus method!
rv = mAsyncStream->Available(&avail);
if (NS_SUCCEEDED(rv))
return STATE_TRANSFER;
if (rv != NS_BASE_STREAM_CLOSED)
mStatus = rv;
}
}
return STATE_STOP;
}
nsresult
nsInputStreamPump::CallOnStateStop()
{
ReentrantMonitorAutoEnter mon(mMonitor);
MOZ_ASSERT(NS_IsMainThread(),
"CallOnStateStop should only be called on the main thread.");
mState = OnStateStop();
return NS_OK;
}
uint32_t
nsInputStreamPump::OnStateStop()
{
mMonitor.AssertCurrentThreadIn();
if (!NS_IsMainThread()) {
// Hopefully temporary hack: OnStateStop should only run on the main
// thread, but we're seeing some rare off-main-thread calls. For now
// just redispatch to the main thread in release builds, and crash in
// debug builds.
MOZ_ASSERT(NS_IsMainThread(),
"OnStateStop should only be called on the main thread.");
nsresult rv = NS_DispatchToMainThread(
NS_NewRunnableMethod(this, &nsInputStreamPump::CallOnStateStop));
NS_ENSURE_SUCCESS(rv, STATE_IDLE);
return STATE_IDLE;
}
PROFILER_LABEL("nsInputStreamPump", "OnStateStop",
js::ProfileEntry::Category::NETWORK);
LOG((" OnStateStop [this=%p status=%x]\n", this, mStatus));
// if an error occurred, we must be sure to pass the error onto the async
// stream. in some cases, this is redundant, but since close is idempotent,
// this is OK. otherwise, be sure to honor the "close-when-done" option.
if (!mAsyncStream || !mListener) {
MOZ_ASSERT(mAsyncStream, "null mAsyncStream: OnStateStop called twice?");
MOZ_ASSERT(mListener, "null mListener: OnStateStop called twice?");
return STATE_IDLE;
}
if (NS_FAILED(mStatus))
mAsyncStream->CloseWithStatus(mStatus);
else if (mCloseWhenDone)
mAsyncStream->Close();
mAsyncStream = 0;
mTargetThread = 0;
mIsPending = false;
{
// Note: Must exit monitor for call to OnStartRequest to avoid
// deadlocks when calls to RetargetDeliveryTo for multiple
// nsInputStreamPumps are needed (e.g. nsHttpChannel).
mMonitor.Exit();
mListener->OnStopRequest(this, mListenerContext, mStatus);
mMonitor.Enter();
}
mListener = 0;
mListenerContext = 0;
if (mLoadGroup)
mLoadGroup->RemoveRequest(this, nullptr, mStatus);
return STATE_IDLE;
}
//-----------------------------------------------------------------------------
// nsIThreadRetargetableRequest
//-----------------------------------------------------------------------------
NS_IMETHODIMP
nsInputStreamPump::RetargetDeliveryTo(nsIEventTarget* aNewTarget)
{
ReentrantMonitorAutoEnter mon(mMonitor);
NS_ENSURE_ARG(aNewTarget);
NS_ENSURE_TRUE(mState == STATE_START || mState == STATE_TRANSFER,
NS_ERROR_UNEXPECTED);
// If canceled, do not retarget. Return with canceled status.
if (NS_FAILED(mStatus)) {
return mStatus;
}
if (aNewTarget == mTargetThread) {
NS_WARNING("Retargeting delivery to same thread");
return NS_OK;
}
// Ensure that |mListener| and any subsequent listeners can be retargeted
// to another thread.
nsresult rv = NS_OK;
nsCOMPtr<nsIThreadRetargetableStreamListener> retargetableListener =
do_QueryInterface(mListener, &rv);
if (NS_SUCCEEDED(rv) && retargetableListener) {
rv = retargetableListener->CheckListenerChain();
if (NS_SUCCEEDED(rv)) {
mTargetThread = aNewTarget;
mRetargeting = true;
}
}
LOG(("nsInputStreamPump::RetargetDeliveryTo [this=%x aNewTarget=%p] "
"%s listener [%p] rv[%x]",
this, aNewTarget, (mTargetThread == aNewTarget ? "success" : "failure"),
(nsIStreamListener*)mListener, rv));
return rv;
}