/* -*- Mode: C++; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*- * vim: set ts=8 sts=4 et sw=4 tw=99: * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. */ /* ECMAScript conversion operations. */ #ifndef js_Conversions_h #define js_Conversions_h #include "mozilla/Casting.h" #include "mozilla/FloatingPoint.h" #include "mozilla/TypeTraits.h" #include #include "jspubtd.h" #include "js/RootingAPI.h" #include "js/Value.h" struct JSContext; namespace js { /* DO NOT CALL THIS. Use JS::ToBoolean. */ extern JS_PUBLIC_API(bool) ToBooleanSlow(JS::HandleValue v); /* DO NOT CALL THIS. Use JS::ToNumber. */ extern JS_PUBLIC_API(bool) ToNumberSlow(JSContext* cx, JS::Value v, double* dp); /* DO NOT CALL THIS. Use JS::ToInt8. */ extern JS_PUBLIC_API(bool) ToInt8Slow(JSContext *cx, JS::HandleValue v, int8_t *out); /* DO NOT CALL THIS. Use JS::ToInt16. */ extern JS_PUBLIC_API(bool) ToInt16Slow(JSContext *cx, JS::HandleValue v, int16_t *out); /* DO NOT CALL THIS. Use JS::ToInt32. */ extern JS_PUBLIC_API(bool) ToInt32Slow(JSContext* cx, JS::HandleValue v, int32_t* out); /* DO NOT CALL THIS. Use JS::ToUint32. */ extern JS_PUBLIC_API(bool) ToUint32Slow(JSContext* cx, JS::HandleValue v, uint32_t* out); /* DO NOT CALL THIS. Use JS::ToUint16. */ extern JS_PUBLIC_API(bool) ToUint16Slow(JSContext* cx, JS::HandleValue v, uint16_t* out); /* DO NOT CALL THIS. Use JS::ToInt64. */ extern JS_PUBLIC_API(bool) ToInt64Slow(JSContext* cx, JS::HandleValue v, int64_t* out); /* DO NOT CALL THIS. Use JS::ToUint64. */ extern JS_PUBLIC_API(bool) ToUint64Slow(JSContext* cx, JS::HandleValue v, uint64_t* out); /* DO NOT CALL THIS. Use JS::ToString. */ extern JS_PUBLIC_API(JSString*) ToStringSlow(JSContext* cx, JS::HandleValue v); /* DO NOT CALL THIS. Use JS::ToObject. */ extern JS_PUBLIC_API(JSObject*) ToObjectSlow(JSContext* cx, JS::HandleValue v, bool reportScanStack); } // namespace js namespace JS { namespace detail { #ifdef JS_DEBUG /** * Assert that we're not doing GC on cx, that we're in a request as * needed, and that the compartments for cx and v are correct. * Also check that GC would be safe at this point. */ extern JS_PUBLIC_API(void) AssertArgumentsAreSane(JSContext* cx, HandleValue v); #else inline void AssertArgumentsAreSane(JSContext* cx, HandleValue v) {} #endif /* JS_DEBUG */ } // namespace detail /** * ES6 draft 20141224, 7.1.1, second algorithm. * * Most users shouldn't call this -- use JS::ToBoolean, ToNumber, or ToString * instead. This will typically only be called from custom convert hooks that * wish to fall back to the ES6 default conversion behavior shared by most * objects in JS, codified as OrdinaryToPrimitive. */ extern JS_PUBLIC_API(bool) OrdinaryToPrimitive(JSContext* cx, HandleObject obj, JSType type, MutableHandleValue vp); /* ES6 draft 20141224, 7.1.2. */ MOZ_ALWAYS_INLINE bool ToBoolean(HandleValue v) { if (v.isBoolean()) return v.toBoolean(); if (v.isInt32()) return v.toInt32() != 0; if (v.isNullOrUndefined()) return false; if (v.isDouble()) { double d = v.toDouble(); return !mozilla::IsNaN(d) && d != 0; } if (v.isSymbol()) return true; /* The slow path handles strings and objects. */ return js::ToBooleanSlow(v); } /* ES6 draft 20141224, 7.1.3. */ MOZ_ALWAYS_INLINE bool ToNumber(JSContext* cx, HandleValue v, double* out) { detail::AssertArgumentsAreSane(cx, v); if (v.isNumber()) { *out = v.toNumber(); return true; } return js::ToNumberSlow(cx, v, out); } /* ES6 draft 20141224, ToInteger (specialized for doubles). */ inline double ToInteger(double d) { if (d == 0) return d; if (!mozilla::IsFinite(d)) { if (mozilla::IsNaN(d)) return 0; return d; } return d < 0 ? ceil(d) : floor(d); } /* ES6 draft 20141224, 7.1.5. */ MOZ_ALWAYS_INLINE bool ToInt32(JSContext* cx, JS::HandleValue v, int32_t* out) { detail::AssertArgumentsAreSane(cx, v); if (v.isInt32()) { *out = v.toInt32(); return true; } return js::ToInt32Slow(cx, v, out); } /* ES6 draft 20141224, 7.1.6. */ MOZ_ALWAYS_INLINE bool ToUint32(JSContext* cx, HandleValue v, uint32_t* out) { detail::AssertArgumentsAreSane(cx, v); if (v.isInt32()) { *out = uint32_t(v.toInt32()); return true; } return js::ToUint32Slow(cx, v, out); } /* ES6 draft 20141224, 7.1.7. */ MOZ_ALWAYS_INLINE bool ToInt16(JSContext *cx, JS::HandleValue v, int16_t *out) { detail::AssertArgumentsAreSane(cx, v); if (v.isInt32()) { *out = int16_t(v.toInt32()); return true; } return js::ToInt16Slow(cx, v, out); } /* ES6 draft 20141224, 7.1.8. */ MOZ_ALWAYS_INLINE bool ToUint16(JSContext* cx, HandleValue v, uint16_t* out) { detail::AssertArgumentsAreSane(cx, v); if (v.isInt32()) { *out = uint16_t(v.toInt32()); return true; } return js::ToUint16Slow(cx, v, out); } /* ES6 draft 20141224, 7.1.9 */ MOZ_ALWAYS_INLINE bool ToInt8(JSContext *cx, JS::HandleValue v, int8_t *out) { detail::AssertArgumentsAreSane(cx, v); if (v.isInt32()) { *out = int8_t(v.toInt32()); return true; } return js::ToInt8Slow(cx, v, out); } /* * Non-standard, with behavior similar to that of ToInt32, except in its * producing an int64_t. */ MOZ_ALWAYS_INLINE bool ToInt64(JSContext* cx, HandleValue v, int64_t* out) { detail::AssertArgumentsAreSane(cx, v); if (v.isInt32()) { *out = int64_t(v.toInt32()); return true; } return js::ToInt64Slow(cx, v, out); } /* * Non-standard, with behavior similar to that of ToUint32, except in its * producing a uint64_t. */ MOZ_ALWAYS_INLINE bool ToUint64(JSContext* cx, HandleValue v, uint64_t* out) { detail::AssertArgumentsAreSane(cx, v); if (v.isInt32()) { *out = uint64_t(v.toInt32()); return true; } return js::ToUint64Slow(cx, v, out); } /* ES6 draft 20141224, 7.1.12. */ MOZ_ALWAYS_INLINE JSString* ToString(JSContext* cx, HandleValue v) { detail::AssertArgumentsAreSane(cx, v); if (v.isString()) return v.toString(); return js::ToStringSlow(cx, v); } /* ES6 draft 20141224, 7.1.13. */ inline JSObject* ToObject(JSContext* cx, HandleValue v) { detail::AssertArgumentsAreSane(cx, v); if (v.isObject()) return &v.toObject(); return js::ToObjectSlow(cx, v, false); } namespace detail { /* * Convert a double value to ResultType (an unsigned integral type) using * ECMAScript-style semantics (that is, in like manner to how ECMAScript's * ToInt32 converts to int32_t). * * If d is infinite or NaN, return 0. * Otherwise compute d2 = sign(d) * floor(abs(d)), and return the ResultType * value congruent to d2 mod 2**(bit width of ResultType). * * The algorithm below is inspired by that found in * * but has been generalized to all integer widths. */ template inline ResultType ToUintWidth(double d) { static_assert(mozilla::IsUnsigned::value, "ResultType must be an unsigned type"); uint64_t bits = mozilla::BitwiseCast(d); unsigned DoubleExponentShift = mozilla::FloatingPoint::kExponentShift; // Extract the exponent component. (Be careful here! It's not technically // the exponent in NaN, infinities, and subnormals.) int_fast16_t exp = int_fast16_t((bits & mozilla::FloatingPoint::kExponentBits) >> DoubleExponentShift) - int_fast16_t(mozilla::FloatingPoint::kExponentBias); // If the exponent's less than zero, abs(d) < 1, so the result is 0. (This // also handles subnormals.) if (exp < 0) return 0; uint_fast16_t exponent = mozilla::AssertedCast(exp); // If the exponent is greater than or equal to the bits of precision of a // double plus ResultType's width, the number is either infinite, NaN, or // too large to have lower-order bits in the congruent value. (Example: // 2**84 is exactly representable as a double. The next exact double is // 2**84 + 2**32. Thus if ResultType is int32_t, an exponent >= 84 implies // floor(abs(d)) == 0 mod 2**32.) Return 0 in all these cases. const size_t ResultWidth = CHAR_BIT * sizeof(ResultType); if (exponent >= DoubleExponentShift + ResultWidth) return 0; // The significand contains the bits that will determine the final result. // Shift those bits left or right, according to the exponent, to their // locations in the unsigned binary representation of floor(abs(d)). static_assert(sizeof(ResultType) <= sizeof(uint64_t), "Left-shifting below would lose upper bits"); ResultType result = (exponent > DoubleExponentShift) ? ResultType(bits << (exponent - DoubleExponentShift)) : ResultType(bits >> (DoubleExponentShift - exponent)); // Two further complications remain. First, |result| may contain bogus // sign/exponent bits. Second, IEEE-754 numbers' significands (excluding // subnormals, but we already handled those) have an implicit leading 1 // which may affect the final result. // // It may appear that there's complexity here depending on how ResultWidth // and DoubleExponentShift relate, but it turns out there's not. // // Assume ResultWidth < DoubleExponentShift: // Only right-shifts leave bogus bits in |result|. For this to happen, // we must right-shift by > |DoubleExponentShift - ResultWidth|, implying // |exponent < ResultWidth|. // The implicit leading bit only matters if it appears in the final // result -- if |2**exponent mod 2**ResultWidth != 0|. This implies // |exponent < ResultWidth|. // Otherwise assume ResultWidth >= DoubleExponentShift: // Any left-shift less than |ResultWidth - DoubleExponentShift| leaves // bogus bits in |result|. This implies |exponent < ResultWidth|. Any // right-shift less than |ResultWidth| does too, which implies // |DoubleExponentShift - ResultWidth < exponent|. By assumption, then, // |exponent| is negative, but we excluded that above. So bogus bits // need only |exponent < ResultWidth|. // The implicit leading bit matters identically to the other case, so // again, |exponent < ResultWidth|. if (exponent < ResultWidth) { ResultType implicitOne = ResultType(1) << exponent; result &= implicitOne - 1; // remove bogus bits result += implicitOne; // add the implicit bit } // Compute the congruent value in the signed range. return (bits & mozilla::FloatingPoint::kSignBit) ? ~result + 1 : result; } template inline ResultType ToIntWidth(double d) { static_assert(mozilla::IsSigned::value, "ResultType must be a signed type"); const ResultType MaxValue = (1ULL << (CHAR_BIT * sizeof(ResultType) - 1)) - 1; const ResultType MinValue = -MaxValue - 1; typedef typename mozilla::MakeUnsigned::Type UnsignedResult; UnsignedResult u = ToUintWidth(d); if (u <= UnsignedResult(MaxValue)) return static_cast(u); return (MinValue + static_cast(u - MaxValue)) - 1; } } // namespace detail /* ES5 9.5 ToInt32 (specialized for doubles). */ inline int32_t ToInt32(double d) { // clang crashes compiling this when targeting arm-darwin: // https://llvm.org/bugs/show_bug.cgi?id=22974 #if defined (__arm__) && defined (__GNUC__) && !defined(__APPLE__) int32_t i; uint32_t tmp0; uint32_t tmp1; uint32_t tmp2; asm ( // We use a pure integer solution here. In the 'softfp' ABI, the argument // will start in r0 and r1, and VFP can't do all of the necessary ECMA // conversions by itself so some integer code will be required anyway. A // hybrid solution is faster on A9, but this pure integer solution is // notably faster for A8. // %0 is the result register, and may alias either of the %[QR]1 registers. // %Q4 holds the lower part of the mantissa. // %R4 holds the sign, exponent, and the upper part of the mantissa. // %1, %2 and %3 are used as temporary values. // Extract the exponent. " mov %1, %R4, LSR #20\n" " bic %1, %1, #(1 << 11)\n" // Clear the sign. // Set the implicit top bit of the mantissa. This clobbers a bit of the // exponent, but we have already extracted that. " orr %R4, %R4, #(1 << 20)\n" // Special Cases // We should return zero in the following special cases: // - Exponent is 0x000 - 1023: +/-0 or subnormal. // - Exponent is 0x7ff - 1023: +/-INFINITY or NaN // - This case is implicitly handled by the standard code path anyway, // as shifting the mantissa up by the exponent will result in '0'. // // The result is composed of the mantissa, prepended with '1' and // bit-shifted left by the (decoded) exponent. Note that because the r1[20] // is the bit with value '1', r1 is effectively already shifted (left) by // 20 bits, and r0 is already shifted by 52 bits. // Adjust the exponent to remove the encoding offset. If the decoded // exponent is negative, quickly bail out with '0' as such values round to // zero anyway. This also catches +/-0 and subnormals. " sub %1, %1, #0xff\n" " subs %1, %1, #0x300\n" " bmi 8f\n" // %1 = (decoded) exponent >= 0 // %R4 = upper mantissa and sign // ---- Lower Mantissa ---- " subs %3, %1, #52\n" // Calculate exp-52 " bmi 1f\n" // Shift r0 left by exp-52. // Ensure that we don't overflow ARM's 8-bit shift operand range. // We need to handle anything up to an 11-bit value here as we know that // 52 <= exp <= 1024 (0x400). Any shift beyond 31 bits results in zero // anyway, so as long as we don't touch the bottom 5 bits, we can use // a logical OR to push long shifts into the 32 <= (exp&0xff) <= 255 range. " bic %2, %3, #0xff\n" " orr %3, %3, %2, LSR #3\n" // We can now perform a straight shift, avoiding the need for any // conditional instructions or extra branches. " mov %Q4, %Q4, LSL %3\n" " b 2f\n" "1:\n" // Shift r0 right by 52-exp. // We know that 0 <= exp < 52, and we can shift up to 255 bits so 52-exp // will always be a valid shift and we can sk%3 the range check for this case. " rsb %3, %1, #52\n" " mov %Q4, %Q4, LSR %3\n" // %1 = (decoded) exponent // %R4 = upper mantissa and sign // %Q4 = partially-converted integer "2:\n" // ---- Upper Mantissa ---- // This is much the same as the lower mantissa, with a few different // boundary checks and some masking to hide the exponent & sign bit in the // upper word. // Note that the upper mantissa is pre-shifted by 20 in %R4, but we shift // it left more to remove the sign and exponent so it is effectively // pre-shifted by 31 bits. " subs %3, %1, #31\n" // Calculate exp-31 " mov %1, %R4, LSL #11\n" // Re-use %1 as a temporary register. " bmi 3f\n" // Shift %R4 left by exp-31. // Avoid overflowing the 8-bit shift range, as before. " bic %2, %3, #0xff\n" " orr %3, %3, %2, LSR #3\n" // Perform the shift. " mov %2, %1, LSL %3\n" " b 4f\n" "3:\n" // Shift r1 right by 31-exp. // We know that 0 <= exp < 31, and we can shift up to 255 bits so 31-exp // will always be a valid shift and we can skip the range check for this case. " rsb %3, %3, #0\n" // Calculate 31-exp from -(exp-31) " mov %2, %1, LSR %3\n" // Thumb-2 can't do "LSR %3" in "orr". // %Q4 = partially-converted integer (lower) // %R4 = upper mantissa and sign // %2 = partially-converted integer (upper) "4:\n" // Combine the converted parts. " orr %Q4, %Q4, %2\n" // Negate the result if we have to, and move it to %0 in the process. To // avoid conditionals, we can do this by inverting on %R4[31], then adding // %R4[31]>>31. " eor %Q4, %Q4, %R4, ASR #31\n" " add %0, %Q4, %R4, LSR #31\n" " b 9f\n" "8:\n" // +/-INFINITY, +/-0, subnormals, NaNs, and anything else out-of-range that // will result in a conversion of '0'. " mov %0, #0\n" "9:\n" : "=r" (i), "=&r" (tmp0), "=&r" (tmp1), "=&r" (tmp2), "=&r" (d) : "4" (d) : "cc" ); return i; #else return detail::ToIntWidth(d); #endif } /* ES5 9.6 (specialized for doubles). */ inline uint32_t ToUint32(double d) { return detail::ToUintWidth(d); } /* WEBIDL 4.2.4 */ inline int8_t ToInt8(double d) { return detail::ToIntWidth(d); } /* WEBIDL 4.2.6 */ inline int16_t ToInt16(double d) { return detail::ToIntWidth(d); } /* WEBIDL 4.2.10 */ inline int64_t ToInt64(double d) { return detail::ToIntWidth(d); } /* WEBIDL 4.2.11 */ inline uint64_t ToUint64(double d) { return detail::ToUintWidth(d); } } // namespace JS #endif /* js_Conversions_h */