tenfourfox/netwerk/base/nsIPermissionManager.idl

273 lines
11 KiB
Plaintext

/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/. */
/**
* This file contains an interface to the Permission Manager,
* used to persistenly store permissions for different object types (cookies,
* images etc) on a site-by-site basis.
*
* This service broadcasts the following notification when the permission list
* is changed:
*
* topic : "perm-changed" (PERM_CHANGE_NOTIFICATION)
* broadcast whenever the permission list changes in some way. there
* are four possible data strings for this notification; one
* notification will be broadcast for each change, and will involve
* a single permission.
* subject: an nsIPermission interface pointer representing the permission object
* that changed.
* data : "deleted"
* a permission was deleted. the subject is the deleted permission.
* "added"
* a permission was added. the subject is the added permission.
* "changed"
* a permission was changed. the subject is the new permission.
* "cleared"
* the entire permission list was cleared. the subject is null.
*/
#include "nsISupports.idl"
interface nsIURI;
interface nsIObserver;
interface nsIPrincipal;
interface nsIDOMWindow;
interface nsIPermission;
interface nsISimpleEnumerator;
[scriptable, uuid(a15cd7ef-f7a0-43d2-be86-8bf488dc760b)]
interface nsIPermissionManager : nsISupports
{
/**
* Predefined return values for the testPermission method and for
* the permission param of the add method
* NOTE: UNKNOWN_ACTION (0) is reserved to represent the
* default permission when no entry is found for a host, and
* should not be used by consumers to indicate otherwise.
*/
const uint32_t UNKNOWN_ACTION = 0;
const uint32_t ALLOW_ACTION = 1;
const uint32_t DENY_ACTION = 2;
const uint32_t PROMPT_ACTION = 3;
/**
* Predefined expiration types for permissions. Permissions can be permanent
* (never expire), expire at the end of the session, or expire at a specified
* time. Permissions that expire at the end of a session may also have a
* specified expiration time.
*/
const uint32_t EXPIRE_NEVER = 0;
const uint32_t EXPIRE_SESSION = 1;
const uint32_t EXPIRE_TIME = 2;
/**
* Add permission information for a given URI and permission type. This
* operation will cause the type string to be registered if it does not
* currently exist. If a permission already exists for a given type, it
* will be modified.
*
* @param uri the uri to add the permission for
* @param type a case-sensitive ASCII string, identifying the consumer.
* Consumers should choose this string to be unique, with
* respect to other consumers.
* @param permission an integer representing the desired action (e.g. allow
* or deny). The interpretation of this number is up to the
* consumer, and may represent different actions for different
* types. Consumers may use one of the enumerated permission
* actions defined above, for convenience.
* NOTE: UNKNOWN_ACTION (0) is reserved to represent the
* default permission when no entry is found for a host, and
* should not be used by consumers to indicate otherwise.
* @param expiretype a constant defining whether this permission should
* never expire (EXPIRE_NEVER), expire at the end of the
* session (EXPIRE_SESSION), or expire at a specified time
* (EXPIRE_TIME).
* @param expiretime an integer representation of when this permission
* should be forgotten (milliseconds since Jan 1 1970 0:00:00).
*/
void add(in nsIURI uri,
in string type,
in uint32_t permission,
[optional] in uint32_t expireType,
[optional] in int64_t expireTime);
/**
* Add permission information for a given principal.
* It is internally calling the other add() method using the nsIURI from the
* principal.
* Passing a system principal will be a no-op because they will always be
* granted permissions.
*/
void addFromPrincipal(in nsIPrincipal principal, in string typed,
in uint32_t permission,
[optional] in uint32_t expireType,
[optional] in int64_t expireTime);
/**
* Remove permission information for a given URI and permission type. This will
* remove the permission for the entire host described by the uri, acting as the
* opposite operation to the add() method.
*
* @param uri the uri to remove the permission for
* @param type a case-sensitive ASCII string, identifying the consumer.
* The type must have been previously registered using the
* add() method.
*/
void remove(in nsIURI uri,
in string type);
/**
* Remove permission information for a given principal.
* This is internally calling remove() with the host from the principal's URI.
* Passing system principal will be a no-op because we never add them to the
* database.
*/
void removeFromPrincipal(in nsIPrincipal principal, in string type);
/**
* Remove the given permission from the permission manager.
*
* @param perm a permission obtained from the permission manager.
*/
void removePermission(in nsIPermission perm);
/**
* Clear permission information for all websites.
*/
void removeAll();
/**
* Clear all permission information added since the specified time.
*/
void removeAllSince(in int64_t since);
/**
* Test whether a website has permission to perform the given action.
* @param uri the uri to be tested
* @param type a case-sensitive ASCII string, identifying the consumer
* @param return see add(), param permission. returns UNKNOWN_ACTION when
* there is no stored permission for this uri and / or type.
*/
uint32_t testPermission(in nsIURI uri,
in string type);
/**
* Test whether the principal has the permission to perform a given action.
* System principals will always have permissions granted.
*/
uint32_t testPermissionFromPrincipal(in nsIPrincipal principal,
in string type);
/**
* Test whether the principal associated with the window's document has the
* permission to perform a given action. System principals will always
* have permissions granted.
*/
uint32_t testPermissionFromWindow(in nsIDOMWindow window,
in string type);
/**
* Test whether a website has permission to perform the given action.
* This requires an exact hostname match, subdomains are not a match.
* @param uri the uri to be tested
* @param type a case-sensitive ASCII string, identifying the consumer
* @param return see add(), param permission. returns UNKNOWN_ACTION when
* there is no stored permission for this uri and / or type.
*/
uint32_t testExactPermission(in nsIURI uri,
in string type);
/**
* See testExactPermission() above.
* System principals will always have permissions granted.
*/
uint32_t testExactPermissionFromPrincipal(in nsIPrincipal principal,
in string type);
/**
* Test whether a website has permission to perform the given action
* ignoring active sessions.
* System principals will always have permissions granted.
*
* @param principal the principal
* @param type a case-sensitive ASCII string, identifying the consumer
* @param return see add(), param permission. returns UNKNOWN_ACTION when
* there is no stored permission for this uri and / or type.
*/
uint32_t testExactPermanentPermission(in nsIPrincipal principal,
in string type);
/**
* Get the permission object associated with the given principal and action.
* @param principal The principal
* @param type A case-sensitive ASCII string identifying the consumer
* @param exactHost If true, only the specific host will be matched,
* @see testExactPermission. If false, subdomains will
* also be searched, @see testPermission.
* @returns The matching permission object, or null if no matching object
* was found. No matching object is equivalent to UNKNOWN_ACTION.
* @note Clients in general should prefer the test* methods unless they
* need to know the specific stored details.
* @note This method will always return null for the system principal.
*/
nsIPermission getPermissionObject(in nsIPrincipal principal,
in string type,
in boolean exactHost);
/**
* Increment or decrement our "refcount" of an app id.
*
* We use this refcount to determine an app's lifetime. When an app's
* refcount goes to 0, we clear the permissions given to the app which are
* set to expire at the end of its session.
*/
void addrefAppId(in unsigned long appId);
void releaseAppId(in unsigned long appId);
/**
* Allows enumeration of all stored permissions
* @return an nsISimpleEnumerator interface that allows access to
* nsIPermission objects
*/
readonly attribute nsISimpleEnumerator enumerator;
/**
* Remove all permissions that will match the origin pattern.
*/
void removePermissionsWithAttributes(in DOMString patternAsJSON);
/**
* If the current permission is set to expire, reset the expiration time. If
* there is no permission or the current permission does not expire, this
* method will silently return.
*
* @param sessionExpiretime an integer representation of when this permission
* should be forgotten (milliseconds since
* Jan 1 1970 0:00:00), if it is currently
* EXPIRE_SESSION.
* @param sessionExpiretime an integer representation of when this permission
* should be forgotten (milliseconds since
* Jan 1 1970 0:00:00), if it is currently
* EXPIRE_TIME.
*/
void updateExpireTime(in nsIPrincipal principal,
in string type,
in boolean exactHost,
in uint64_t sessionExpireTime,
in uint64_t persistentExpireTime);
/**
* Remove all current permission settings and get permission settings from
* chrome process.
*/
void refreshPermission();
};
%{ C++
#define NS_PERMISSIONMANAGER_CONTRACTID "@mozilla.org/permissionmanager;1"
#define PERM_CHANGE_NOTIFICATION "perm-changed"
%}