tenfourfox/dom/media/webaudio/test/blink/panner-model-testing.js
Cameron Kaiser c9b2922b70 hello FPR
2017-04-19 00:56:45 -07:00

210 lines
6.7 KiB
JavaScript

var sampleRate = 48000.0;
var numberOfChannels = 1;
// Time step when each panner node starts.
var timeStep = 0.001;
// Length of the impulse signal.
var pulseLengthFrames = Math.round(timeStep * sampleRate);
// How many panner nodes to create for the test
var nodesToCreate = 100;
// Be sure we render long enough for all of our nodes.
var renderLengthSeconds = timeStep * (nodesToCreate + 1);
// These are global mostly for debugging.
var context;
var impulse;
var bufferSource;
var panner;
var position;
var time;
var renderedBuffer;
var renderedLeft;
var renderedRight;
function createGraph(context, nodeCount) {
bufferSource = new Array(nodeCount);
panner = new Array(nodeCount);
position = new Array(nodeCount);
time = new Array(nodeCount);
// Angle between panner locations. (nodeCount - 1 because we want
// to include both 0 and 180 deg.
var angleStep = Math.PI / (nodeCount - 1);
if (numberOfChannels == 2) {
impulse = createStereoImpulseBuffer(context, pulseLengthFrames);
}
else
impulse = createImpulseBuffer(context, pulseLengthFrames);
for (var k = 0; k < nodeCount; ++k) {
bufferSource[k] = context.createBufferSource();
bufferSource[k].buffer = impulse;
panner[k] = context.createPanner();
panner[k].panningModel = "equalpower";
panner[k].distanceModel = "linear";
var angle = angleStep * k;
position[k] = {angle : angle, x : Math.cos(angle), z : Math.sin(angle)};
panner[k].setPosition(position[k].x, 0, position[k].z);
bufferSource[k].connect(panner[k]);
panner[k].connect(context.destination);
// Start the source
time[k] = k * timeStep;
bufferSource[k].start(time[k]);
}
}
function createTestAndRun(context, nodeCount, numberOfSourceChannels) {
numberOfChannels = numberOfSourceChannels;
createGraph(context, nodeCount);
context.oncomplete = checkResult;
context.startRendering();
}
// Map our position angle to the azimuth angle (in degrees).
//
// An angle of 0 corresponds to an azimuth of 90 deg; pi, to -90 deg.
function angleToAzimuth(angle) {
return 90 - angle * 180 / Math.PI;
}
// The gain caused by the EQUALPOWER panning model
function equalPowerGain(angle) {
var azimuth = angleToAzimuth(angle);
if (numberOfChannels == 1) {
var panPosition = (azimuth + 90) / 180;
var gainL = Math.cos(0.5 * Math.PI * panPosition);
var gainR = Math.sin(0.5 * Math.PI * panPosition);
return { left : gainL, right : gainR };
} else {
if (azimuth <= 0) {
var panPosition = (azimuth + 90) / 90;
var gainL = 1 + Math.cos(0.5 * Math.PI * panPosition);
var gainR = Math.sin(0.5 * Math.PI * panPosition);
return { left : gainL, right : gainR };
} else {
var panPosition = azimuth / 90;
var gainL = Math.cos(0.5 * Math.PI * panPosition);
var gainR = 1 + Math.sin(0.5 * Math.PI * panPosition);
return { left : gainL, right : gainR };
}
}
}
function checkResult(event) {
renderedBuffer = event.renderedBuffer;
renderedLeft = renderedBuffer.getChannelData(0);
renderedRight = renderedBuffer.getChannelData(1);
// The max error we allow between the rendered impulse and the
// expected value. This value is experimentally determined. Set
// to 0 to make the test fail to see what the actual error is.
var maxAllowedError = 1.3e-6;
var success = true;
// Number of impulses found in the rendered result.
var impulseCount = 0;
// Max (relative) error and the index of the maxima for the left
// and right channels.
var maxErrorL = 0;
var maxErrorIndexL = 0;
var maxErrorR = 0;
var maxErrorIndexR = 0;
// Number of impulses that don't match our expected locations.
var timeCount = 0;
// Locations of where the impulses aren't at the expected locations.
var timeErrors = new Array();
for (var k = 0; k < renderedLeft.length; ++k) {
// We assume that the left and right channels start at the same instant.
if (renderedLeft[k] != 0 || renderedRight[k] != 0) {
// The expected gain for the left and right channels.
var pannerGain = equalPowerGain(position[impulseCount].angle);
var expectedL = pannerGain.left;
var expectedR = pannerGain.right;
// Absolute error in the gain.
var errorL = Math.abs(renderedLeft[k] - expectedL);
var errorR = Math.abs(renderedRight[k] - expectedR);
if (Math.abs(errorL) > maxErrorL) {
maxErrorL = Math.abs(errorL);
maxErrorIndexL = impulseCount;
}
if (Math.abs(errorR) > maxErrorR) {
maxErrorR = Math.abs(errorR);
maxErrorIndexR = impulseCount;
}
// Keep track of the impulses that didn't show up where we
// expected them to be.
var expectedOffset = timeToSampleFrame(time[impulseCount], sampleRate);
if (k != expectedOffset) {
timeErrors[timeCount] = { actual : k, expected : expectedOffset};
++timeCount;
}
++impulseCount;
}
}
if (impulseCount == nodesToCreate) {
testPassed("Number of impulses matches the number of panner nodes.");
} else {
testFailed("Number of impulses is incorrect. (Found " + impulseCount + " but expected " + nodesToCreate + ")");
success = false;
}
if (timeErrors.length > 0) {
success = false;
testFailed(timeErrors.length + " timing errors found in " + nodesToCreate + " panner nodes.");
for (var k = 0; k < timeErrors.length; ++k) {
testFailed("Impulse at sample " + timeErrors[k].actual + " but expected " + timeErrors[k].expected);
}
} else {
testPassed("All impulses at expected offsets.");
}
if (maxErrorL <= maxAllowedError) {
testPassed("Left channel gain values are correct.");
} else {
testFailed("Left channel gain values are incorrect. Max error = " + maxErrorL + " at time " + time[maxErrorIndexL] + " (threshold = " + maxAllowedError + ")");
success = false;
}
if (maxErrorR <= maxAllowedError) {
testPassed("Right channel gain values are correct.");
} else {
testFailed("Right channel gain values are incorrect. Max error = " + maxErrorR + " at time " + time[maxErrorIndexR] + " (threshold = " + maxAllowedError + ")");
success = false;
}
if (success) {
testPassed("EqualPower panner test passed");
} else {
testFailed("EqualPower panner test failed");
}
finishJSTest();
}