tenfourfox/hal/cocoa/smslib.h
Cameron Kaiser c9b2922b70 hello FPR
2017-04-19 00:56:45 -07:00

161 lines
6.5 KiB
Objective-C

/*
* smslib.h
*
* SMSLib Sudden Motion Sensor Access Library
* Copyright (c) 2010 Suitable Systems
* All rights reserved.
*
* Developed by: Daniel Griscom
* Suitable Systems
* http://www.suitable.com
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the
* "Software"), to deal with the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish,
* distribute, sublicense, and/or sell copies of the Software, and to
* permit persons to whom the Software is furnished to do so, subject to
* the following conditions:
*
* - Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimers.
*
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimers in the
* documentation and/or other materials provided with the distribution.
*
* - Neither the names of Suitable Systems nor the names of its
* contributors may be used to endorse or promote products derived from
* this Software without specific prior written permission.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
* OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
* IN NO EVENT SHALL THE CONTRIBUTORS OR COPYRIGHT HOLDERS BE LIABLE FOR
* ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
* TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
* SOFTWARE OR THE USE OR OTHER DEALINGS WITH THE SOFTWARE.
*
* For more information about SMSLib, see
* <http://www.suitable.com/tools/smslib.html>
* or contact
* Daniel Griscom
* Suitable Systems
* 1 Centre Street, Suite 204
* Wakefield, MA 01880
* (781) 665-0053
*
*/
#import <Foundation/Foundation.h>
#include <unistd.h>
#define SMSLIB_VERSION "1.8"
#pragma mark Structure definitions
// Structure for specifying a 3-axis acceleration. 0.0 means "zero gravities",
// 1.0 means "one gravity".
typedef struct sms_acceleration {
float x; // Right-left acceleration (positive is rightwards)
float y; // Front-rear acceleration (positive is rearwards)
float z; // Up-down acceleration (positive is upwards)
} sms_acceleration;
// Structure for specifying a calibration.
typedef struct sms_calibration {
float zeros[3]; // Zero points for three axes (X, Y, Z)
float onegs[3]; // One gravity values for three axes
} sms_calibration;
#pragma mark Return value definitions
// These are the return values for accelStartup(), giving the
// various stages where the most successful attempt at accessing
// the accelerometer failed. The higher the value, the further along the
// software progressed before failing. The options are:
// - Didn't match model name
#define SMS_FAIL_MODEL (-7)
// - Failure getting dictionary matching desired services
#define SMS_FAIL_DICTIONARY (-6)
// - Failure getting list of services
#define SMS_FAIL_LIST_SERVICES (-5)
// - Failure if list of services is empty. The process generally fails
// here if run on a machine without a Sudden Motion Sensor.
#define SMS_FAIL_NO_SERVICES (-4)
// - Failure if error opening device.
#define SMS_FAIL_OPENING (-3)
// - Failure if opened, but didn't get a connection
#define SMS_FAIL_CONNECTION (-2)
// - Failure if couldn't access connction using given function and size. This
// is where the process would probably fail with a change in Apple's API.
// Driver problems often also cause failures here.
#define SMS_FAIL_ACCESS (-1)
// - Success!
#define SMS_SUCCESS (0)
#pragma mark Function declarations
// This starts up the accelerometer code, trying each possible sensor
// specification. Note that for logging purposes it
// takes an object and a selector; the object's selector is then invoked
// with a single NSString as argument giving progress messages. Example
// logging method:
// - (void)logMessage: (NSString *)theString
// which would be used in accelStartup's invocation thusly:
// result = accelStartup(self, @selector(logMessage:));
// If the object is nil, then no logging is done. Sets calibation from built-in
// value table. Returns ACCEL_SUCCESS for success, and other (negative)
// values for various failures (returns value indicating result of
// most successful trial).
int smsStartup(id logObject, SEL logSelector);
// This starts up the library in debug mode, ignoring the actual hardware.
// Returned data is in the form of 1Hz sine waves, with the X, Y and Z
// axes 120 degrees out of phase; "calibrated" data has range +/- (1.0/5);
// "uncalibrated" data has range +/- (256/5). X and Y axes centered on 0.0,
// Z axes centered on 1 (calibrated) or 256 (uncalibrated).
// Don't use smsGetBufferLength or smsGetBufferData. Always returns SMS_SUCCESS.
int smsDebugStartup(id logObject, SEL logSelector);
// Returns the current calibration values.
void smsGetCalibration(sms_calibration *calibrationRecord);
// Sets the calibration, but does NOT store it as a preference. If the argument
// is nil then the current calibration is set from the built-in value table.
void smsSetCalibration(sms_calibration *calibrationRecord);
// Stores the current calibration values as a stored preference.
void smsStoreCalibration(void);
// Loads the stored preference values into the current calibration.
// Returns YES if successful.
BOOL smsLoadCalibration(void);
// Deletes any stored calibration, and then takes the current calibration values
// from the built-in value table.
void smsDeleteCalibration(void);
// Fills in the accel record with calibrated acceleration data. Takes
// 1-2ms to return a value. Returns 0 if success, error number if failure.
int smsGetData(sms_acceleration *accel);
// Fills in the accel record with uncalibrated acceleration data.
// Returns 0 if success, error number if failure.
int smsGetUncalibratedData(sms_acceleration *accel);
// Returns the length of a raw block of data for the current type of sensor.
int smsGetBufferLength(void);
// Takes a pointer to accelGetRawLength() bytes; sets those bytes
// to return value from sensor. Make darn sure the buffer length is right!
void smsGetBufferData(char *buffer);
// This returns an NSString describing the current calibration in
// human-readable form. Also include a description of the machine.
NSString *smsGetCalibrationDescription(void);
// Shuts down the accelerometer.
void smsShutdown(void);