Retro68/binutils/gas/doc/c-z80.texi

377 lines
13 KiB
Plaintext
Raw Normal View History

2022-10-27 18:45:45 +00:00
@c Copyright (C) 2011-2022 Free Software Foundation, Inc.
2012-03-26 19:18:29 +00:00
@c This is part of the GAS manual.
@c For copying conditions, see the file as.texinfo.
@ifset GENERIC
@page
@node Z80-Dependent
@chapter Z80 Dependent Features
@end ifset
@ifclear GENERIC
@node Machine Dependencies
@chapter Z80 Dependent Features
@end ifclear
@cindex Z80 support
@menu
* Z80 Options:: Options
* Z80 Syntax:: Syntax
* Z80 Floating Point:: Floating Point
* Z80 Directives:: Z80 Machine Directives
* Z80 Opcodes:: Opcodes
@end menu
@node Z80 Options
2022-10-27 18:45:45 +00:00
@section Command-line Options
2012-03-26 19:18:29 +00:00
@cindex Z80 options
@cindex options for Z80
2022-10-27 18:45:45 +00:00
@c man begin OPTIONS
@table @gcctabopt
@cindex @code{-march=} command-line option, Z80
@item -march=@var{CPU}[-@var{EXT}@dots{}][+@var{EXT}@dots{}]
This option specifies the target processor. The assembler will issue
an error message if an attempt is made to assemble an instruction which
will not execute on the target processor. The following processor names
are recognized:
@code{z80},
@code{z180},
@code{ez80},
@code{gbz80},
@code{z80n},
@code{r800}.
In addition to the basic instruction set, the assembler can be told to
accept some extention mnemonics. For example,
@code{-march=z180+sli+infc} extends @var{z180} with @var{SLI} instructions and
@var{IN F,(C)}. The following extentions are currently supported:
@code{full} (all known instructions),
@code{adl} (ADL CPU mode by default, eZ80 only),
@code{sli} (instruction known as @var{SLI}, @var{SLL} or @var{SL1}),
@code{xyhl} (instructions with halves of index registers: @var{IXL}, @var{IXH},
@var{IYL}, @var{IYH}),
@code{xdcb} (instructions like @var{RotOp (II+d),R} and @var{BitOp n,(II+d),R}),
@code{infc} (instruction @var{IN F,(C)} or @var{IN (C)}),
@code{outc0} (instruction @var{OUT (C),0}).
Note that rather than extending a basic instruction set, the extention
mnemonics starting with @code{-} revoke the respective functionality:
@code{-march=z80-full+xyhl} first removes all default extentions and adds
support for index registers halves only.
If this option is not specified then @code{-march=z80+xyhl+infc} is assumed.
@cindex @code{-local-prefix} command-line option, Z80
@item -local-prefix=@var{prefix}
Mark all labels with specified prefix as local. But such label can be
marked global explicitly in the code. This option do not change default
local label prefix @code{.L}, it is just adds new one.
@cindex @code{-colonless} command-line option, Z80
@item -colonless
Accept colonless labels. All symbols at line begin are treated as labels.
@cindex @code{-sdcc} command-line option, Z80
@item -sdcc
Accept assembler code produced by SDCC.
@cindex @code{-fp-s} command-line option, Z80
@item -fp-s=@var{FORMAT}
Single precision floating point numbers format. Default: ieee754 (32 bit).
@cindex @code{-fp-d} command-line option, Z80
@item -fp-d=@var{FORMAT}
Double precision floating point numbers format. Default: ieee754 (64 bit).
@end table
@c man end
Floating point numbers formats.
2012-03-26 19:18:29 +00:00
@table @option
2022-10-27 18:45:45 +00:00
@item @code{ieee754}
Single or double precision IEEE754 compatible format.
@item @code{half}
Half precision IEEE754 compatible format (16 bits).
@item @code{single}
Single precision IEEE754 compatible format (32 bits).
@item @code{double}
Double precision IEEE754 compatible format (64 bits).
@item @code{zeda32}
32 bit floating point format from z80float library by Zeda.
@item @code{math48}
48 bit floating point format from Math48 package by Anders Hejlsberg.
2012-03-26 19:18:29 +00:00
@end table
@cindex Z80 Syntax
@node Z80 Syntax
@section Syntax
The assembler syntax closely follows the 'Z80 family CPU User Manual' by
Zilog.
In expressions a single @samp{=} may be used as ``is equal to''
comparison operator.
2012-03-26 19:18:29 +00:00
Suffices can be used to indicate the radix of integer constants;
@samp{H} or @samp{h} for hexadecimal, @samp{D} or @samp{d} for decimal,
@samp{Q}, @samp{O}, @samp{q} or @samp{o} for octal, and @samp{B} for
binary.
The suffix @samp{b} denotes a backreference to local label.
2012-03-26 19:18:29 +00:00
@menu
* Z80-Chars:: Special Characters
* Z80-Regs:: Register Names
* Z80-Case:: Case Sensitivity
2022-10-27 18:45:45 +00:00
* Z80-Labels:: Labels
2012-03-26 19:18:29 +00:00
@end menu
@node Z80-Chars
@subsection Special Characters
@cindex line comment character, Z80
@cindex Z80 line comment character
The semicolon @samp{;} is the line comment character;
If a @samp{#} appears as the first character of a line then the whole
line is treated as a comment, but in this case the line could also be
a logical line number directive (@pxref{Comments}) or a preprocessor
control command (@pxref{Preprocessing}).
@cindex line separator, Z80
@cindex statement separator, Z80
@cindex Z80 line separator
The Z80 assembler does not support a line separator character.
2012-03-26 19:18:29 +00:00
@cindex location counter, Z80
@cindex hexadecimal prefix, Z80
@cindex Z80 $
The dollar sign @samp{$} can be used as a prefix for hexadecimal numbers
and as a symbol denoting the current location counter.
@cindex character escapes, Z80
@cindex Z80, \
A backslash @samp{\} is an ordinary character for the Z80 assembler.
2012-03-26 19:18:29 +00:00
@cindex character constant, Z80
@cindex single quote, Z80
@cindex Z80 '
The single quote @samp{'} must be followed by a closing quote. If there
is one character in between, it is a character constant, otherwise it is
a string constant.
@node Z80-Regs
@subsection Register Names
@cindex Z80 registers
@cindex register names, Z80
The registers are referred to with the letters assigned to them by
Zilog. In addition @command{@value{AS}} recognizes @samp{ixl} and
2012-03-26 19:18:29 +00:00
@samp{ixh} as the least and most significant octet in @samp{ix}, and
similarly @samp{iyl} and @samp{iyh} as parts of @samp{iy}.
2012-03-26 19:18:29 +00:00
@c The @samp{'} in @samp{ex af,af'} may be omitted.
@node Z80-Case
@subsection Case Sensitivity
@cindex Z80, case sensitivity
@cindex case sensitivity, Z80
Upper and lower case are equivalent in register names, opcodes,
condition codes and assembler directives.
2012-03-26 19:18:29 +00:00
The case of letters is significant in labels and symbol names. The case
is also important to distinguish the suffix @samp{b} for a backward reference
to a local label from the suffix @samp{B} for a number in binary notation.
2022-10-27 18:45:45 +00:00
@node Z80-Labels
@subsection Labels
@cindex labels, Z80
@cindex Z80 labels
Labels started by @code{.L} acts as local labels. You may specify custom local
label prefix by @code{-local-prefix} command-line option.
Dollar, forward and backward local labels are supported. By default, all labels
are followed by colon.
Legacy code with colonless labels can be built with @code{-colonless}
command-line option specified. In this case all tokens at line begin are treated
as labels.
2012-03-26 19:18:29 +00:00
@node Z80 Floating Point
@section Floating Point
@cindex floating point, Z80
@cindex Z80 floating point
2022-10-27 18:45:45 +00:00
Floating-point numbers of following types are supported:
@table @option
@item @code{ieee754}
Supported half, single and double precision IEEE754 compatible numbers.
@item @code{zeda32}
32 bit floating point numbers from z80float library by Zeda.
@item @code{math48}
48 bit floating point numbers from Math48 package by Anders Hejlsberg.
@end table
2012-03-26 19:18:29 +00:00
@node Z80 Directives
@section Z80 Assembler Directives
2022-10-27 18:45:45 +00:00
@cindex Z80-only directives
2012-03-26 19:18:29 +00:00
@command{@value{AS}} for the Z80 supports some additional directives for
compatibility with other assemblers.
2012-03-26 19:18:29 +00:00
These are the additional directives in @code{@value{AS}} for the Z80:
@table @code
2022-10-27 18:45:45 +00:00
@item @code{.assume ADL = @var{expression}}
@cindex @code{.assume} directive, Z80
Set ADL status for eZ80. Non-zero value enable compilation in ADL mode else
used Z80 mode. ADL and Z80 mode produces incompatible object code. Mixing
both of them within one binary may lead problems with disassembler.
@item @code{db @var{expression}|@var{string}[,@var{expression}|@var{string}...]}
@cindex @code{db} directive, Z80
@itemx @code{defb @var{expression}|@var{string}[,@var{expression}|@var{string}...]}
@cindex @code{defb} directive, Z80
@itemx @code{defm @var{string}[,@var{string}...]}
@cindex @code{defm} directive, Z80
2012-03-26 19:18:29 +00:00
For each @var{string} the characters are copied to the object file, for
each other @var{expression} the value is stored in one byte.
A warning is issued in case of an overflow.
2022-10-27 18:45:45 +00:00
Backslash symbol in the strings is generic symbol, it cannot be used as
escape character. @xref{Ascii,,@code{.ascii}}.
2012-03-26 19:18:29 +00:00
2022-10-27 18:45:45 +00:00
@item @code{dw @var{expression}[,@var{expression}...]}
@cindex @code{dw} directive, Z80
@itemx @code{defw @var{expression}[,@var{expression}...]}
@cindex @code{defw} directive, Z80
2012-03-26 19:18:29 +00:00
For each @var{expression} the value is stored in two bytes, ignoring
overflow.
2012-03-26 19:18:29 +00:00
2022-10-27 18:45:45 +00:00
@item @code{d24 @var{expression}[,@var{expression}...]}
@cindex @code{d24} directive, Z80
@itemx @code{def24 @var{expression}[,@var{expression}...]}
@cindex @code{def24} directive, Z80
2012-03-26 19:18:29 +00:00
For each @var{expression} the value is stored in three bytes, ignoring
overflow.
2012-03-26 19:18:29 +00:00
2022-10-27 18:45:45 +00:00
@item @code{d32 @var{expression}[,@var{expression}...]}
@cindex @code{d32} directive, Z80
@itemx @code{def32 @var{expression}[,@var{expression}...]}
@cindex @code{def32} directive, Z80
2012-03-26 19:18:29 +00:00
For each @var{expression} the value is stored in four bytes, ignoring
overflow.
2012-03-26 19:18:29 +00:00
2022-10-27 18:45:45 +00:00
@item @code{ds @var{count}[, @var{value}]}
@cindex @code{ds} directive, Z80
@itemx @code{defs @var{count}[, @var{value}]}
@cindex @code{defs} directive, Z80
@c Synonyms for @code{ds.b},
2012-03-26 19:18:29 +00:00
@c which should have been described elsewhere
Fill @var{count} bytes in the object file with @var{value}, if
@var{value} is omitted it defaults to zero.
2022-10-27 18:45:45 +00:00
@item @code{@var{symbol} defl @var{expression}}
@cindex @code{defl} directive, Z80
The @code{defl} directive is like @code{.set} but with different
syntax. @xref{Set,,@code{.set}}.
It set the value of @var{symbol} to @var{expression}. Symbols defined
with @code{defl} are not protected from redefinition.
@item @code{@var{symbol} equ @var{expression}}
@cindex @code{equ} directive, Z80
The @code{equ} directive is like @code{.equiv} but with different
syntax. @xref{Equiv, ,@code{.equiv}}.
It set the value of @var{symbol} to @var{expression}. It is an error
if @var{symbol} is already defined. Symbols defined with @code{equ}
are not protected from redefinition.
@item @code{psect @var{name}}
@cindex @code{psect} directive, Z80
A synonym for @code{.section}, no second argument should be given.
@xref{Section,,@code{.section}}.
@item @code{xdef @var{symbol}}
@cindex @code{xdef} directive, Z80
A synonym for @code{.global}, make @var{symbol} is visible to linker.
@xref{Global,,@code{.global}}.
@item @code{xref @var{name}}
@cindex @code{xref} directive, Z80
A synonym for @code{.extern} (@ref{Extern,,@code{.extern}}).
2012-03-26 19:18:29 +00:00
@ignore
The following attributes will possibly be recognized in the future
@table @code
@item abs
The section is to be absolute. @code{@value{AS}} will issue an error
message because it can not produce an absolute section.
@item global
The section is to be concatenated with other sections of the same name
by the linker, this is the default.
@item local
The section is not global. @code{@value{AS}} will issue a warning if
object file format is not soff.
@item ovrld
The section is to be overlapped with other sections of the same name by
the linker. @code{@value{AS}} will issue an error message
because it can not mark a section as such.
@item pure
The section is marked as read only.
@end table
@end ignore
@end table
@node Z80 Opcodes
@section Opcodes
2022-10-27 18:45:45 +00:00
In line with common practice, Z80 mnemonics are used for the Z80,
Z80N, Z180, eZ80, Ascii R800 and the GameBoy Z80.
2012-03-26 19:18:29 +00:00
In many instructions it is possible to use one of the half index
registers (@samp{ixl},@samp{ixh},@samp{iyl},@samp{iyh}) in stead of an
8-bit general purpose register. This yields instructions that are
2022-10-27 18:45:45 +00:00
documented on the eZ80 and the R800, undocumented on the Z80 and
unsupported on the Z180.
Similarly @code{in f,(c)} is documented on the R800, undocumented on
the Z80 and unsupported on the Z180 and the eZ80.
2012-03-26 19:18:29 +00:00
The assembler also supports the following undocumented Z80-instructions,
2022-10-27 18:45:45 +00:00
that have not been adopted in any other instruction set:
2012-03-26 19:18:29 +00:00
@table @code
@item out (c),0
2022-10-27 18:45:45 +00:00
Sends zero to the port pointed to by register @code{C}.
2012-03-26 19:18:29 +00:00
@item sli @var{m}
Equivalent to @code{@var{m} = (@var{m}<<1)+1}, the operand @var{m} can
be any operand that is valid for @samp{sla}. One can use @samp{sll} as a
synonym for @samp{sli}.
@item @var{op} (ix+@var{d}), @var{r}
This is equivalent to
2012-03-26 19:18:29 +00:00
@example
ld @var{r}, (ix+@var{d})
2022-10-27 18:45:45 +00:00
@var{op} @var{r}
2012-03-26 19:18:29 +00:00
ld (ix+@var{d}), @var{r}
@end example
2022-10-27 18:45:45 +00:00
The operation @samp{@var{op}} may be any of @samp{res @var{b},},
2012-03-26 19:18:29 +00:00
@samp{set @var{b},}, @samp{rl}, @samp{rlc}, @samp{rr}, @samp{rrc},
@samp{sla}, @samp{sli}, @samp{sra} and @samp{srl}, and the register
@samp{@var{r}} may be any of @samp{a}, @samp{b}, @samp{c}, @samp{d},
@samp{e}, @samp{h} and @samp{l}.
2022-10-27 18:45:45 +00:00
@item @var{op} (iy+@var{d}), @var{r}
2012-03-26 19:18:29 +00:00
As above, but with @samp{iy} instead of @samp{ix}.
@end table
The web site at @uref{http://www.z80.info} is a good starting place to
find more information on programming the Z80.
2022-10-27 18:45:45 +00:00
You may enable or disable any of these instructions for any target CPU
even this instruction is not supported by any real CPU of this type.
Useful for custom CPU cores.