There are cases where when it's necessary (e.g. given uninitialized NVRAM,
the Beige G3 with the 10.2 install CD inserted will update the boot
device and restart to boot from it).
Restart support was done by wrapping the ppc_exec function in a loop and
checking for a restart power off reason. We also need to disconnect all
event listeners, since they will be recreated when the machine is
re-initialized.
When fetching DMA command, make sure to convert little endian fields to host endianness (i.e. don't use memcpy).
When fetching DMA command, return the host address of the DMA command for LOAD_QUAD. Maybe this address should be cached whenever this->cmdptr changes?
When fetching DMA command, return whether the DMA command is writable.
For LOAD_QUAD, pass the address of the DMA command to xfer_quad.
Always log unexpected DMA command values.
Write full 32-bit value for LOAD_QUAD.
Write reqCount to resCount.
pci_conv_rd_data can be used to handle unaligned or 64-bit accesses in mmio regions if it's modified to include the next 32-bit value.
For pci config accesses, grackle repeats the 32-bit value. bandit uses a seemingly random number for the next 32-bit value, but we'll make it work like grackle.
PCCard is used by PowerBook G3 Wallstreet in Open Firmware 2.0.1.
CardBus is probed in New World Macs starting from at least Open Firmware 4.1.9f1 sometime after Open Firmware 3.1.1.
- Create PCIBase from common stuff in PCIDevice.
- Add PCIBridgeBase. These have a primary bus number, secondary bus number, and subordinate bus number which are used to determine if PCI type 1 config cycle should be passed.
- Change PCIBridge to use PCIBridgeBase instead of PCIDevice.
- Add PCICardBusBridge which uses PCIBridgeBase.
For example, Old World Macs have versions of Open Firmware that don't support 512 MB BARs correctly. They may attempt to set such a BAR to 0x90000000 (a 256 MB boundary) instead of 0xA0000000 (the next available 512 MB boundary).
So that you don't see identical messages "Could not restore NVRAM content from the given file."
Instead, one will mention nvram.bin and the other will mention pram.bin.
AdbKeyboard would copy the event into its own fields and set the
changed field, so that we could return the event when register was 0.
However, if a subsequent event was received before ADB polling, the
previous event would be overwritten and lost.
Fix this by maintaining a queue of events, so that we can return
everything since the last poll.
We were using an empty value on the second byte of the ADB keyboard
register 0, but that maps to the "a" key. This manifested itself
as the Key Caps DA never showing the "a" key as being down.
Switch to a non-existent key for the second byte.
Allows different implementations for different platforms (the JS
build relies on browser APIs to stream disk images over the network).
Setting aside the JS build, this also reduces some code duplication.
Besides generating KeyboardEvents in the SDL event handler and
returning the key state in the register 0 reads of the AdbKeyboard
device, we also needed to generalize the ADB bus polling a bit. We now
check all devices that have the service request bit set, instead of
hardcoding the mouse.
The SDL key event -> ADB raw key code mapping is based on BasiliskII/
SheepShaver's, but cleaned up a bit.
Result of running IWYU (https://include-what-you-use.org/) and
applying most of the suggestions about unncessary includes and
forward declarations.
Was motivated by observing that <thread> was being included in
ppcopcodes.cpp even though it was unused (found while researching
the use of threads), but seems generally good to help with build
times and correctness.
The disk cache is unchanged. data_ptr continues to be only used for the user data sector area for each block. The other sector areas (synch, header, etc.) are filled in while reading.
has_data and get_data exist as a way to bypass data_ptr for parts of the transfer outside the user data sector area of each block. The default behaviour is defined in atabasedevice and is overridden by atapicdrom for the Read CD command. atapicdrom has a flag doing_sector_areas to control the behavior of the get_data method. When the flag is true, the sector_areas, current_block, and current_block_byte are used for selecting the correct data from one of the sector areas. The Read CD command initializes those variables. xfer_cnt remains the total number of bytes to be transferred and is now not necessarily the same as the number of disk image blocks read into the disk cache.
lba_to_msf is used to fill in the header. The values was not verified using a real CD.
Mac OS X just cares about the Mode in the header. For now, only the synch and header and user data areas are filled in. The other areas read as all zeros.
It was possible to corrupt New World nvram using dingusppc setenv command.
- setenv must call get_config_vars to set data_length so that it can calculate free space.
- data_length represents the number of bytes taken by nvram variables including the terminating null for the value (name, '=', value, '\0'). Previously, it did not include the terminating null.
- The list of variables and values ends at a '\0' or at pos == 4096 bytes. Previously, data_length wouldn't get set if pos >= 4096.
- Allow setenv to create new nvram variables.
- Since data_length now represents the total number of used bytes, free_space now represents the actual free space, so use > free_space (instead of >= free_space) to determine insufficient space.
- While parsing nvram variable name, do not read beyond 4096 bytes.
- Use a different error message for each problem that can occur while parsing nvram variable name.
If a nvram variable has CRLF or CR, replace them with LF so each line appears on a new line in the console output.
Also, add indent to each line so that each line appears only in the value column and not in the name column.
