/*
DingusPPC - The Experimental PowerPC Macintosh emulator
Copyright (C) 2018-22 divingkatae and maximum
(theweirdo) spatium
(Contact divingkatae#1017 or powermax#2286 on Discord for more info)
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see .
*/
/** MacIO device family emulation
Mac I/O (MIO) is a family of ASICs to bring support for Apple legacy
I/O hardware to the PCI-based Power Macintosh. That legacy hardware has
existed long before Power Macintosh was introduced. It includes:
- versatile interface adapter (VIA)
- Sander-Woz integrated machine (SWIM) that is a floppy disk controller
- CUDA MCU for ADB, parameter RAM, realtime clock and power management support
- serial communication controller (SCC)
- Macintosh Enhanced SCSI Hardware (MESH)
In the 68k Macintosh era, all this hardware was implemented using several
custom chips. In a PCI-compatible Power Macintosh, the above devices are part
of the MIO chip itself. MIO's functional blocks implementing virtual devices
are called "cells", i.e. "VIA cell", "SWIM cell" etc.
MIO itself is PCI compliant while the legacy hardware it emulates isn't.
MIO occupies 512Kb of the PCI memory space divided into registers space and
DMA space. Access to emulated legacy devices is accomplished by reading from/
writing to MIO's PCI address space at predefined offsets.
MIO includes a DMA controller that offers 15 DMA channels implementing
Apple's own DMA protocol called descriptor-based DMA (DBDMA).
Official documentation (that is somewhat incomplete and erroneous) can be
found in the second chapter of the book "Macintosh Technology in the Common
Hardware Reference Platform" by Apple Computer, Inc.
*/
#ifndef MACIO_H
#define MACIO_H
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
/** Interrupt related constants. */
#define MACIO_INT_CLR 0x80UL // clears bits in the interrupt events registers
#define MACIO_INT_MODE 0x80000000UL // interrupt mode: 0 - native, 1 - 68k-style
/** Offsets to common MacIO interrupt registers. */
enum {
MIO_INT_EVENTS2 = 0x10,
MIO_INT_MASK2 = 0x14,
MIO_INT_CLEAR2 = 0x18,
MIO_INT_LEVELS2 = 0x1C,
MIO_INT_EVENTS1 = 0x20,
MIO_INT_MASK1 = 0x24,
MIO_INT_CLEAR1 = 0x28,
MIO_INT_LEVELS1 = 0x2C
};
class IobusDevice {
public:
virtual uint16_t iodev_read(uint32_t address) = 0;
virtual void iodev_write(uint32_t address, uint16_t value) = 0;
};
class GrandCentral : public PCIDevice, public InterruptCtrl {
public:
GrandCentral();
~GrandCentral() = default;
static std::unique_ptr create() {
return std::unique_ptr(new GrandCentral());
}
// MMIO device methods
uint32_t read(uint32_t rgn_start, uint32_t offset, int size);
void write(uint32_t rgn_start, uint32_t offset, uint32_t value, int size);
// InterruptCtrl methods
uint32_t register_dev_int(IntSrc src_id);
uint32_t register_dma_int(IntSrc src_id);
void ack_int(uint32_t irq_id, uint8_t irq_line_state);
void ack_dma_int(uint32_t irq_id, uint8_t irq_line_state);
void attach_iodevice(int dev_num, IobusDevice* dev_obj);
protected:
void notify_bar_change(int bar_num);
private:
uint32_t base_addr = 0;
uint8_t emmo_pin; // factory tester status, active low
// interrupt state
uint32_t int_mask = 0;
uint32_t int_levels = 0;
uint32_t int_events = 0;
bool cpu_int_latch = false;
uint32_t nvram_addr_hi;
// IOBus devices
IobusDevice* iobus_devs[6] = { nullptr };
// subdevice objects
std::unique_ptr awacs; // AWACS audio codec instance
NVram* nvram; // NVRAM module
MaceController* mace;
ViaCuda* viacuda; // VIA cell with Cuda MCU attached to it
EsccController* escc; // ESCC serial controller
Sc53C94* scsi_0; // external SCSI
Swim3::Swim3Ctrl* swim3; // floppy disk controller
std::unique_ptr snd_out_dma;
std::unique_ptr floppy_dma;
};
class OHare : public PCIDevice, public InterruptCtrl {
public:
OHare();
~OHare() = default;
static std::unique_ptr create() {
return std::unique_ptr(new OHare());
}
// MMIO device methods
uint32_t read(uint32_t rgn_start, uint32_t offset, int size);
void write(uint32_t rgn_start, uint32_t offset, uint32_t value, int size);
// InterruptCtrl methods
uint32_t register_dev_int(IntSrc src_id);
uint32_t register_dma_int(IntSrc src_id);
void ack_int(uint32_t irq_id, uint8_t irq_line_state);
void ack_dma_int(uint32_t irq_id, uint8_t irq_line_state);
protected:
void notify_bar_change(int bar_num);
uint32_t read_ctrl(uint32_t offset, int size);
void write_ctrl(uint32_t offset, uint32_t value, int size);
uint32_t dma_read(uint32_t offset, int size);
void dma_write(uint32_t offset, uint32_t value, int size);
private:
uint32_t base_addr = 0;
// interrupt state
uint32_t int_mask = 0;
uint32_t int_levels = 0;
uint32_t int_events = 0;
bool cpu_int_latch = false;
std::unique_ptr awacs; // AWACS audio codec instance
std::unique_ptr snd_out_dma;
NVram* nvram; // NVRAM module
ViaCuda* viacuda; // VIA cell with Cuda MCU attached to it
EsccController* escc; // ESCC serial controller
};
/**
Heathrow ASIC emulation
Heathrow is a MIO-compliant ASIC used in the Gossamer architecture. It's
hard-wired to PCI device number 16. Its I/O memory (512Kb) will be configured
by the Macintosh firmware to live at 0xF3000000.
Emulated subdevices and their offsets within Heathrow I/O space:
----------------------------------------------------------------
mesh(SCSI) register space: 0x00010000, DMA space: 0x00008000
bmac(ethernet) register space: 0x00011000, DMA space: 0x00008200, 0x00008300
escc(compat) register space: 0x00012000, size: 0x00001000
DMA space: 0x00008400, size: 0x00000400
escc(MacRISC) register space: 0x00013000, size: 0x00001000
DMA space: 0x00008400, size: 0x00000400
escc:ch-a register space: 0x00013020, DMA space: 0x00008400, 0x00008500
escc:ch-b register space: 0x00013000, DMA space: 0x00008600, 0x00008700
davbus(sound) register space: 0x00014000, DMA space: 0x00008800, 0x00008900
SWIM3(floppy) register space: 0x00015000, DMA space: 0x00008100
NVRAM register space: 0x00060000, size: 0x00020000
IDE register space: 0x00020000, DMA space: 0x00008b00
VIA-CUDA register space: 0x00016000, size: 0x00002000
*/
/** O'Hare/Heathrow specific registers. */
enum {
MIO_OHARE_ID = 0x34, // IDs register
MIO_OHARE_FEAT_CTRL = 0x38, // feature control register
};
class HeathrowIC : public PCIDevice, public InterruptCtrl {
public:
HeathrowIC();
~HeathrowIC() = default;
static std::unique_ptr create() {
return std::unique_ptr(new HeathrowIC());
}
// MMIO device methods
uint32_t read(uint32_t rgn_start, uint32_t offset, int size);
void write(uint32_t rgn_start, uint32_t offset, uint32_t value, int size);
// InterruptCtrl methods
uint32_t register_dev_int(IntSrc src_id);
uint32_t register_dma_int(IntSrc src_id);
void ack_int(uint32_t irq_id, uint8_t irq_line_state);
void ack_dma_int(uint32_t irq_id, uint8_t irq_line_state);
protected:
uint32_t dma_read(uint32_t offset, int size);
void dma_write(uint32_t offset, uint32_t value, int size);
uint32_t mio_ctrl_read(uint32_t offset, int size);
void mio_ctrl_write(uint32_t offset, uint32_t value, int size);
void notify_bar_change(int bar_num);
void feature_control(const uint32_t value);
void clear_cpu_int();
private:
uint32_t base_addr = 0;
uint32_t int_events2 = 0;
uint32_t int_mask2 = 0;
uint32_t int_levels2 = 0;
uint32_t int_events1 = 0;
uint32_t int_mask1 = 0;
uint32_t int_levels1 = 0;
uint32_t feat_ctrl = 0; // features control register
uint32_t aux_ctrl = 0; // aux features control register
bool cpu_int_latch = false;
uint8_t cpu_id = 0xE0; // CPUID field (LSB of the MIO_HEAT_ID)
uint8_t mb_id = 0x70; // Media Bay ID (bits 15:8 of the MIO_HEAT_ID)
uint8_t mon_id = 0x10; // Monitor ID (bits 23:16 of the MIO_HEAT_ID)
uint8_t fp_id = 0x70; // Flat panel ID (MSB of the MIO_HEAT_ID)
uint8_t emmo_pin; // factory tester status, active low
// subdevice objects
std::unique_ptr screamer; // Screamer audio codec instance
NVram* nvram; // NVRAM
ViaCuda* viacuda; // VIA cell with Cuda MCU attached to it
MESHController* mesh; // MESH SCSI cell instance
EsccController* escc; // ESCC serial controller
Swim3::Swim3Ctrl* swim3; // floppy disk controller
// DMA channels
std::unique_ptr snd_out_dma;
std::unique_ptr floppy_dma;
};
#endif /* MACIO_H */