mirror of
https://github.com/dingusdev/dingusppc.git
synced 2024-09-01 02:29:04 +00:00
A PCI device passes an interrupt to its host. The host will determine from the PCI device which interrupt to trigger.
128 lines
4.5 KiB
C++
128 lines
4.5 KiB
C++
/*
|
|
DingusPPC - The Experimental PowerPC Macintosh emulator
|
|
Copyright (C) 2018-23 divingkatae and maximum
|
|
(theweirdo) spatium
|
|
|
|
(Contact divingkatae#1017 or powermax#2286 on Discord for more info)
|
|
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <https://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
/** MPC106 (Grackle) definitions.
|
|
|
|
Grackle IC is a combined memory and PCI controller manufactured by Motorola.
|
|
It's the central device in the Gossamer architecture.
|
|
Manual: https://www.nxp.com/docs/en/reference-manual/MPC106UM.pdf
|
|
|
|
This code emulates as much functionality as needed to run Power Mac Beige G3.
|
|
This implies that
|
|
- we only support address map B
|
|
- our virtual device reports revision 4.0 as expected by machine firmware
|
|
*/
|
|
|
|
#ifndef MPC106_H
|
|
#define MPC106_H
|
|
|
|
#include <devices/common/pci/pcidevice.h>
|
|
#include <devices/common/pci/pcihost.h>
|
|
#include <machines/machinebase.h>
|
|
|
|
#include <cinttypes>
|
|
#include <memory>
|
|
|
|
class InterruptCtrl;
|
|
|
|
/** Grackle configuration space registers. */
|
|
enum GrackleReg : uint32_t {
|
|
CFG10 = 0x40, // bus # + subordinate bus # + disconnect counter
|
|
PMCR1 = 0x70, // power management config 1
|
|
MSAR1 = 0x80, // memory starting address 1
|
|
MSAR2 = 0x84, // memory starting address 2
|
|
EMSAR1 = 0x88, // extended memory starting address 1
|
|
EMSAR2 = 0x8C, // extended memory starting address 2
|
|
MEAR1 = 0x90, // memory ending address 1
|
|
MEAR2 = 0x94, // memory ending address 2
|
|
EMEAR1 = 0x98, // extended memory ending address 1
|
|
EMEAR2 = 0x9C, // extended memory ending address 2
|
|
MBER = 0xA0, // memory bank enable
|
|
PICR1 = 0xA8, // processor interface configuration 1
|
|
PICR2 = 0xAC, // processor interface configuration 2
|
|
MCCR1 = 0xF0, // memory control configuration 1
|
|
MCCR2 = 0xF4, // memory control configuration 2
|
|
MCCR3 = 0xF8, // memory control configuration 3
|
|
MCCR4 = 0xFC // memory control configuration 4
|
|
};
|
|
|
|
/* MCCR1 bit definitions. */
|
|
enum {
|
|
MEMGO = 1 << 19,
|
|
};
|
|
|
|
class MPC106 : public MemCtrlBase, public PCIDevice, public PCIHost {
|
|
public:
|
|
MPC106();
|
|
~MPC106() = default;
|
|
|
|
static std::unique_ptr<HWComponent> create() {
|
|
return std::unique_ptr<MPC106>(new MPC106());
|
|
}
|
|
|
|
uint32_t read(uint32_t rgn_start, uint32_t offset, int size);
|
|
void write(uint32_t rgn_start, uint32_t offset, uint32_t value, int size);
|
|
|
|
virtual void pci_interrupt(uint8_t irq_line_state, PCIBase *dev);
|
|
|
|
int device_postinit();
|
|
|
|
protected:
|
|
/* my own PCI configuration registers access */
|
|
uint32_t pci_cfg_read(uint32_t reg_offs, AccessDetails &details);
|
|
void pci_cfg_write(uint32_t reg_offs, uint32_t value, AccessDetails &details);
|
|
|
|
void setup_ram(void);
|
|
|
|
private:
|
|
inline void cfg_setup(uint32_t offset, int size, int &bus_num, int &dev_num,
|
|
int &fun_num, uint8_t ®_offs, AccessDetails &details,
|
|
PCIBase *&device);
|
|
|
|
uint32_t config_addr;
|
|
|
|
uint16_t pmcr1 = 0; // power management config 1
|
|
uint8_t pmcr2 = 0; // power management config 2
|
|
uint8_t odcr = 0xCD; // output driver control
|
|
uint32_t picr1 = 0xFF100010; // ROM on CPU bus, address map B, CPU type = MPC601
|
|
uint32_t picr2 = 0x000C060C;
|
|
uint32_t mccr1 = 0xFF820000; // 64bit ROM bus
|
|
uint32_t mccr2 = 3;
|
|
uint32_t mccr3 = 0;
|
|
uint32_t mccr4 = 0x00100000;
|
|
|
|
uint32_t mem_start[2] = {};
|
|
uint32_t ext_mem_start[2] = {};
|
|
uint32_t mem_end[2] = {};
|
|
uint32_t ext_mem_end[2] = {};
|
|
uint8_t mem_bank_en = 0;
|
|
|
|
// interrupt related stuff
|
|
InterruptCtrl* int_ctrl = nullptr;
|
|
uint32_t irq_id_PCI_A = 0;
|
|
uint32_t irq_id_PCI_B = 0;
|
|
uint32_t irq_id_PCI_C = 0;
|
|
uint32_t irq_id_PCI_GPU = 0;
|
|
uint32_t irq_id_PCI_PERCH = 0;
|
|
};
|
|
|
|
#endif // MPC106_H
|