dingusppc/devices/memctrl/hammerhead.h
2024-02-20 01:53:32 +01:00

130 lines
3.7 KiB
C++

/*
DingusPPC - The Experimental PowerPC Macintosh emulator
Copyright (C) 2018-23 divingkatae and maximum
(theweirdo) spatium
(Contact divingkatae#1017 or powermax#2286 on Discord for more info)
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <https://www.gnu.org/licenses/>.
*/
/** Hammerhead Memory Controller definitions.
Author: Max Poliakovski
Hammerhead is a custom memory controller and ARBus arbiter
designed especially for the TNT family of Power Macintosh computers.
*/
#ifndef HAMMERHEAD_MEMCTRL_H
#define HAMMERHEAD_MEMCTRL_H
#include <devices/common/hwcomponent.h>
#include <devices/common/mmiodevice.h>
#include <devices/memctrl/memctrlbase.h>
#include <cinttypes>
#include <memory>
namespace Hammerhead {
#define RISC_MACHINE 0x3
#define MACH_TYPE_TNT 0x1
#define EXTENDED_ID 0x1 // examine some other registers to get full ID
#define HH_CPU_ID_TNT ((RISC_MACHINE << 4) | (EXTENDED_ID << 3) | MACH_TYPE_TNT)
// constants for the MBID field of the MOTHERBOARD_ID register
enum {
MBID_VCI0_PRESENT = 4,
MBID_PCI2_PRESENT = 2,
};
// ARBus speed constants for the CPU_SPEED register
enum {
BUS_SPEED_40_MHZ = 0,
BUS_SPEED_33_MHZ = 1,
BUS_SPEED_44_MHZ = 2,
BUS_SPEED_50_MHZ = 3
};
// bus master IDs for the WHO_AM_I register
enum {
BM_VIDEO_BRIDGE = 1 << 4,
BM_PCI_BRIDGE_1 = 1 << 3,
BM_PCI_BRIDGE_2 = 1 << 2,
BM_PRIMARY_CPU = 1 << 1,
BM_SECONDARY_CPU = 1 << 0
};
// Configuration and status registers.
enum HammerheadReg : uint16_t {
CPU_ID = 0x00,
ASIC_REVISION = 0x10,
MOTHERBOARD_ID = 0x20,
CPU_SPEED = 0x30,
MB_DRAM_CONFIG = 0x40,
MEM_TIMING_0 = 0x50,
MEM_TIMING_1 = 0x60,
REFRESH_TIMING = 0x70,
ROM_TIMING = 0x80,
ARBITER_CONFIG = 0x90,
ARBUS_TIMEOUT = 0xA0,
WHO_AM_I = 0xB0,
L2_CACHE_CONFIG = 0xE0,
BANK_0_BASE_MSB = 0x1C0,
BANK_25_BASE_LSB = 0x4F0,
};
}; // namespace Hammerhead
class HammerheadCtrl : public MemCtrlBase, public MMIODevice {
public:
HammerheadCtrl();
~HammerheadCtrl() = default;
static std::unique_ptr<HWComponent> create() {
return std::unique_ptr<HammerheadCtrl>(new HammerheadCtrl());
}
// MMIODevice methods
uint32_t read(uint32_t rgn_start, uint32_t offset, int size);
void write(uint32_t rgn_start, uint32_t offset, uint32_t value, int size);
void set_motherboard_id(const uint8_t val) {
this->mb_id = val & 7;
};
void set_rom_type(const uint8_t val) {
this->rom_type = val & 1;
};
void set_bus_speed(const uint8_t val) {
this->bus_speed = val & 7;
};
void insert_ram_dimm(int slot_num, uint32_t capacity);
void map_phys_ram();
private:
uint8_t mb_id = Hammerhead::MBID_VCI0_PRESENT;
uint8_t rom_type = 1; // 1 - burstable ROM installed
uint8_t bus_speed = Hammerhead::BUS_SPEED_40_MHZ;
uint8_t arb_config = 0;
uint16_t bank_base[26] = {};
uint32_t bank_size[26] = {};
};
#endif // HAMMERHEAD_MEMCTRL_H