mirror of
https://github.com/ctm/executor.git
synced 2024-11-27 01:49:33 +00:00
63 lines
2.8 KiB
Plaintext
Executable File
63 lines
2.8 KiB
Plaintext
Executable File
Executor 2 can read Mac formatted CD-ROMs, but it needs a way to read
|
|
raw CD-ROM sectors to do so.
|
|
|
|
If your computer has a SCSI CD-ROM and you have ASPI drivers
|
|
installed, Executor should be able to use them to read Mac formatted
|
|
CD-ROMs.
|
|
|
|
If not, Executor needs to use the 16-bit version of the Microsoft
|
|
CD-ROM Extensions to read raw CD-ROM extensions. That means that if
|
|
you're running Windows 3.x, you'll need to install MSCDEX.
|
|
|
|
If you're running Windows '95, you'll need to adjust your
|
|
configuration so that you use the 16-bit version of MSCDEX (at least
|
|
when you're running Executor), instead of the 32-bit version.
|
|
|
|
The easiest way to configure your system is to have a Windows Guru do
|
|
it for you. If you explain that Executor/DOS needs ASPI drivers or
|
|
the old version of MSCDEX, a knowledgeable Windows person can probably
|
|
examine your system and make the mods to your config.sys and
|
|
autoexec.bat to do the right thing.
|
|
|
|
If you don't have someone you can lean on, you may be able to get
|
|
technical support from wherever you purchased your PC, or if that
|
|
doesn't help, the company that made your CD-ROM drive may be able to
|
|
help you out.
|
|
|
|
The problem is that installing the old version of MSCDEX is a
|
|
different process on different types of machines. For instance, on
|
|
our Micron Millennia Transport laptop, we needed to add this line to
|
|
C:\CONFIG.SYS
|
|
|
|
DEVICE=C:\CDROM\SJCDAPI.SYS /D:MSCD000
|
|
|
|
and then we needed to add this line to C:\AUTOEXEC.BAT
|
|
|
|
MSCDEX.EXE /D:MSCD000 /M:40 /L:E
|
|
|
|
The first line is responsible for loading the 16-bit CD-ROM driver,
|
|
and that's the line that varies from system to system. The problem is
|
|
that you need to know where your 16-bit CD-ROM driver is, and
|
|
sometimes it can be hard to find. The "/D:MSCD000" portion of the
|
|
DEVICE line tells DOS/Windows that the device driver will be known as
|
|
"MSCD000".
|
|
|
|
The second line actually loads MSCDEX, and says to look for the device
|
|
driver "MSCD000", which we installed via the first line. The "/M:40"
|
|
portion of the line asks DOS/Windows to buffer 40 blocks, and the
|
|
"/L:E" portion tells DOS/Windows that we want the device to be logical
|
|
disk "E:". In general, you can use the exact same MSCDEX line in your
|
|
autoexec.bat as we have above, as long as you have the right 16-bit
|
|
CD-ROM driver loaded in your config.sys file.
|
|
|
|
NOTE: Even with those two lines added, we have to reboot our Micron
|
|
Millennia Transport into MS-DOS mode before Executor can access Mac
|
|
formatted CD-ROMs. You may also experience this restriction.
|
|
|
|
This configuration problem will go away once Executor has been
|
|
rewritten to be a Win32 program instead of a DOS program.
|
|
|
|
If Executor 2 is telling you to read this file, and you'd prefer that
|
|
it stop telling you about it, you can rename this file and Executor
|
|
will stop.
|