macemu/BasiliskII/INSTALL

156 lines
6.3 KiB
Plaintext
Raw Normal View History

BASILISK II INSTALLATION INSTRUCTIONS
=====================================
System Requirements
-------------------
To use Basilisk II, you need either a 512K Mac Classic ROM image or a
512K or 1MB 32-bit clean Macintosh ROM image. You also need a copy of MacOS
(0.x thru 7.5 for Classic emulation, 7.x or 8.0/8.1 for Mac II emulation).
For copyright reasons, none of these items are included with Basilisk II.
MacOS 7.5.3 and earlier versions can be downloaded from Apple and various
other Internet sites. Mac ROM files are not freely available. You have to
own a real Mac and read out its ROM. No, I don't know where you can download
ROM files. No, I won't send you one.
Depending on the platform you use, Basilisk II has additional requirements:
BeOS:
You need BeOS R4 or better. On a PowerPC system you also need the
"sheep" driver that comes with SheepShaver. To use Ethernet, you need
the "sheep_net" add-on that also comes with SheepShaver (both items
are included in the SheepShaver Trial Versions). The PowerPC version of
Basilisk II cannot do Mac Classic emulation.
Unix:
2000-07-13 17:45:52 +00:00
You need X11R6 and a "make" utility with the VPATH feature (e.g. GNU make).
For serial, ethernet and audio support, you need pthreads. To use the GUI
preferences editor, you also need GTK+ version 1.2 or better. On Linux, you
need glibc 2.0 or better.
AmigaOS:
You need at least a 68020 and AmigaOS 3.0 or better. To get the GUI
preferences editor, you need gtlayout.library V39 or later. To get sound
output, you need AHI V2 or later. Both items can be found on Aminet. You
also need the "PrepareEmul" utility that somes with ShapeShifter (or any
equivalent PrepareEmul substitute). The AmigaOS version of Basilisk II
cannot do Mac Classic emulation.
Windows:
You need at least Windows NT 4.0. Windows 95 and 98 can be used too, with a
somewhat reduced set of features. Basilisk II supports DirectX version 5 or
later, but version 3 may also work, depending on your graphics card.
Installation
------------
BeOS:
If you have a binary distribution of Basilisk II for BeOS, there are
executables for BeOS/PPC and/or BeOS/x86 included. If you have the source
distribution, do the following:
cd src/BeOS
make
1999-10-04 21:07:12 +00:00
This will produce an executable "BasiliskII" in the "obj.ppc" or "obj.x86"
directory. Basilisk II cannot run concurrently with SheepShaver. Trying to
do so will crash Basilisk II, or SheepShaver, or both. On a PowerPC system
you must have installed the "sheep" driver that comes with SheepShaver. To
use Ethernet, you must have installed the "sheep_net" add-on that also comes
with SheepShaver
Unix:
To compile Basilisk II, do the following:
cd src/Unix
./configure
1999-10-15 14:47:49 +00:00
make [or "gmake" if you have GNU make and "make" fails]
make install [optionally]
To use Ethernet networking under Linux, you either have to configure your
kernel for ethertap support or make and install the "sheep_net" driver:
make modules
This should produce a kernel module "sheep_net.o" in the "Linux/NetDriver"
directory. Now su root and say
cd Linux/NetDriver
make dev
/sbin/insmod sheep_net.o
This will install the device node "/dev/sheep_net" and load the driver.
You should give appropriate access rights to /dev/sheep_net if you don't
want to have to run Basilisk II as root.
This is what Brian J. Johnson says about compiling for IRIX:
"I recommend compiling with "-Ofast". This requires changing "-g"
to "-Ofast" in the Makefile, and adding "-ipa" to LDFLAGS. This
turns on massive interprocedural optimization, and makes for much
better performance."
2000-07-13 17:45:52 +00:00
ATTENTION NetBSD/m68k USERS:
If you want to run Basilisk II natively (i.e. without CPU emulation), you
must NOT use a pthreads library. User-level threads libraries such as PTL
interfere with the signal handlers installed by Basilisk II and kernel-
level threads are not supported by NetBSD, so you will have to live without
pthreads (and thus, without serial/ethernet/audio support).
ATTENTION NetBSD/mac68k USERS:
Current (as of July 2000) versions of the NetBSD/mac68k kernel have a bug
that not only prevents Basilisk II from running properly but seems to even
cause kernel panics under certain conditions! Apply the following patch to
/sys/arch/mac68k/mac68k/macromasm.s, recompile and re-install the kernel
and reboot before using Basilisk II:
--- macromasm.s.orig Wed Jul 5 19:29:01 2000
+++ macromasm.s Wed Jul 5 19:12:34 2000
@@ -37,6 +37,8 @@
#include "opt_adb.h"
#include "assym.h"
+#include <machine/asm.h>
+#include <machine/trap.h>
/* Define this symbol as global with (v) value */
@@ -437,8 +439,9 @@
movw sp@(FR_HW + 4), d0 | retrieve status register
andw #PSL_S, d0 | supervisor state?
bne Lalnosup | branch if supervisor
- jbsr _mrg_aline_user | user a-line trap
- bra Lalrts
+ addql #4, sp | pop frame ptr
+ movql #T_ILLINST, d0 | user-mode fault
+ jra _ASM_LABEL(fault)
Lalnosup:
#define FR_PC (FR_HW+2)
movl sp@(FR_PC + 4), a0 | retrieve PC
AmigaOS:
If you have a binary distribution of Basilisk II for AmigaOS, there is an
executable included. You must also have the "PrepareEmul" utility installed
that comes with ShapeShifter (or any equivalent PrepareEmul substitute,
see the ShapeShifter docs). If you have the source distribution, do the
following:
cd src/AmigaOS
smake
To recompile Basilisk II, you need SAS/C 6.58. Earlier versions may not work.
Windows NT:
If you have a binary distribution of Basilisk II for Windows, there is a
Windows NT binary included. To access CD-ROMs under Windows NT, the driver
"cdenable.sys" must be copied to your "\WinNT\System32\drivers" directory.
To access CD-ROMs under Windows 9x, the driver "cdenable.vxd" must be copied
to the "\Windows\System" directory. To recompile Basilisk II, you need
MS Visual V++ 5.0 or later. Symantec C++ should work, too, with some
modifications. See the "sysdeps.h" file in the "Windows" directory.
The ROM file has to be named "ROM" and put in the same directory as the
Basilisk II executable but you can specify a different location for the ROM
file with the "rom" option in the preferences file (or with the preferences
GUI).