python-rsrcfork/rsrcfork/compress/dcmp0.py

270 lines
11 KiB
Python

import io
import typing
from . import common
# Lookup table for codes in range(0x4b, 0xfe).
# This table was obtained by decompressing a manually created compressed resource with the following contents:
# b'\xa8\x9fer\x00\x12\x08\x01\x00\x00\x01f\x80\x03\x00\x00\x00\x00' + bytes(range(0x4b, 0xfe)) + b'\xff'
TABLE_DATA = (
# First line corresponds to codes in range(0x4b, 0x50).
b"\x00\x00N\xba\x00\x08Nu\x00\x0c"
# All following lines correspond to 8 codes each.
b"N\xad S/\x0ba\x00\x00\x10p\x00/\x00Hn"
b" P n/.\xff\xfcH\xe7?<\x00\x04\xff\xf8"
b"/\x0c \x06N\xedNV hN^\x00\x01X\x8f"
b"O\xef\x00\x02\x00\x18`\x00\xff\xffP\x8fN\x90\x00\x06"
b"&n\x00\x14\xff\xf4L\xee\x00\n\x00\x0eA\xeeL\xdf"
b"H\xc0\xff\xf0-@\x00\x120.p\x01/( T"
b"g\x00\x00 \x00\x1c _\x18\x00&oHx\x00\x16"
b"A\xfa0<(@r\x00(n \x0cf\x00 k"
b"/\x07U\x8f\x00(\xff\xfe\xff\xec\"\xd8 \x0b\x00\x0f"
b"Y\x8f/<\xff\x00\x01\x18\x81\xe1J\x00N\xb0\xff\xe8"
b"H\xc7\x00\x03\x00\"\x00\x07\x00\x1ag\x06g\x08N\xf9"
b"\x00$ x\x08\x00f\x04\x00*N\xd00(&_"
b"g\x04\x000C\xee?\x00 \x1f\x00\x1e\xff\xf6 ."
b"B\xa7 \x07\xff\xfa`\x02=@\x0c@f\x06\x00&"
b"-H/\x01p\xff`\x04\x18\x80J@\x00@\x00,"
b"/\x08\x00\x11\xff\xe4!@&@\xff\xf2BnN\xb9"
b"=|\x008\x00\r`\x06B. <g\x0c-h"
b"f\x08J.J\xae\x00.H@\"_\"\x00g\n"
b"0\x07Bg\x002 (\x00\tHz\x02\x00/+"
b"\x00\x05\"nf\x02\xe5\x80g\x0ef\n\x00P>\x00"
b"f\x0c.\x00\xff\xee m @\xff\xe0S@`\x08"
# Last line corresponds to codes in range(0xf8, 0xfe).
b"\x04\x80\x00h\x0b|D\x00A\xe8HA"
)
# Note: index 0 in this table corresponds to code 0x4b, index 1 to 0x4c, etc.
TABLE = [TABLE_DATA[i:i + 2] for i in range(0, len(TABLE_DATA), 2)]
assert len(TABLE) == len(range(0x4b, 0xfe))
def decompress_stream_inner(header_info: common.CompressedHeaderInfo, stream: typing.BinaryIO, *, debug: bool=False) -> typing.Iterator[bytes]:
"""Internal helper function, implements the main decompression algorithm. Only called from decompress_stream, which performs some extra checks and debug logging."""
if not isinstance(header_info, common.CompressedType8HeaderInfo):
raise common.DecompressError(f"Incorrect header type: {type(header_info).__qualname__}")
prev_literals: typing.List[bytes] = []
while True: # Loop is terminated when the EOF marker (0xff) is encountered
(byte,) = common.read_exact(stream, 1)
if debug:
print(f"Tag byte 0x{byte:>02x}")
if byte in range(0x00, 0x20):
# Literal byte sequence.
if byte in (0x00, 0x10):
# The length of the literal data is stored in the next byte.
(count_div2,) = common.read_exact(stream, 1)
else:
# The length of the literal data is stored in the low nibble of the tag byte.
count_div2 = byte >> 0 & 0xf
count = 2 * count_div2
# Controls whether or not the literal is stored so that it can be referenced again later.
do_store = byte >= 0x10
literal = common.read_exact(stream, count)
if debug:
print(f"Literal (storing: {do_store})")
if do_store:
if debug:
print(f"\t-> storing as literal number 0x{len(prev_literals):x}")
prev_literals.append(literal)
yield literal
elif byte in (0x20, 0x21):
# Backreference to a previous literal, 2-byte form.
# This can reference literals with index in range(0x28, 0x228).
(next_byte,) = common.read_exact(stream, 1)
table_index = 0x28 + ((byte - 0x20) << 8 | next_byte)
if debug:
print(f"Backreference (2-byte form) to 0x{table_index:>02x}")
yield prev_literals[table_index]
elif byte == 0x22:
# Backreference to a previous literal, 3-byte form.
# This can reference any literal with index 0x28 and higher, but is only necessary for literals with index 0x228 and higher.
table_index = 0x28 + int.from_bytes(common.read_exact(stream, 2), "big", signed=False)
if debug:
print(f"Backreference (3-byte form) to 0x{table_index:>02x}")
yield prev_literals[table_index]
elif byte in range(0x23, 0x4b):
# Backreference to a previous literal, 1-byte form.
# This can reference literals with indices in range(0x28).
table_index = byte - 0x23
if debug:
print(f"Backreference (1-byte form) to 0x{table_index:>02x}")
yield prev_literals[table_index]
elif byte in range(0x4b, 0xfe):
# Reference into a fixed table of two-byte literals.
# All compressed resources use the same table.
table_index = byte - 0x4b
if debug:
print(f"Fixed table reference to 0x{table_index:>02x}")
yield TABLE[table_index]
elif byte == 0xfe:
# Extended code, whose meaning is controlled by the following byte.
(kind,) = common.read_exact(stream, 1)
if debug:
print(f"Extended code: 0x{kind:>02x}")
if kind == 0x00:
# Compact representation of (part of) a segment loader jump table, as used in 'CODE' (0) resources.
if debug:
print(f"Segment loader jump table entries")
# All generated jump table entries have the same segment number.
segment_number_int = common.read_variable_length_integer(stream)
if debug:
print(f"\t-> segment number: {segment_number_int:#x}")
# The tail part of all jump table entries (i. e. everything except for the address).
entry_tail = b"?<" + segment_number_int.to_bytes(2, "big", signed=False) + b"\xa9\xf0"
# The tail is output once *without* an address in front, i. e. the first entry's address must be generated manually by a previous code.
yield entry_tail
count = common.read_variable_length_integer(stream)
if count <= 0:
raise common.DecompressError(f"Jump table entry count must be greater than 0, not {count}")
# The second entry's address is stored explicitly.
current_int = common.read_variable_length_integer(stream)
if debug:
print(f"\t-> address of second entry: {current_int:#x}")
yield current_int.to_bytes(2, "big", signed=False) + entry_tail
for _ in range(1, count):
# All further entries' addresses are stored as differences relative to the previous entry's address.
diff = common.read_variable_length_integer(stream)
# For some reason, each difference is 6 higher than it should be.
diff -= 6
# Simulate 16-bit integer wraparound.
current_int = (current_int + diff) & 0xffff
if debug:
print(f"\t-> difference {diff:#x}: {current_int:#x}")
yield current_int.to_bytes(2, "big", signed=False) + entry_tail
elif kind in (0x02, 0x03):
# Repeat 1 or 2 bytes a certain number of times.
if kind == 0x02:
byte_count = 1
elif kind == 0x03:
byte_count = 2
else:
raise AssertionError()
if debug:
print(f"Repeat {byte_count}-byte value")
# The byte(s) to repeat, stored as a variable-length integer. The value is treated as unsigned, i. e. the integer is never negative.
to_repeat_int = common.read_variable_length_integer(stream)
try:
to_repeat = to_repeat_int.to_bytes(byte_count, "big", signed=False)
except OverflowError:
raise common.DecompressError(f"Value to repeat out of range for {byte_count}-byte repeat: {to_repeat_int:#x}")
count = common.read_variable_length_integer(stream) + 1
if count <= 0:
raise common.DecompressError(f"Repeat count must be positive: {count}")
if debug:
print(f"\t-> {to_repeat!r} * {count}")
yield to_repeat * count
elif kind == 0x04:
# A sequence of 16-bit signed integers, with each integer encoded as a difference relative to the previous integer. The first integer is stored explicitly.
if debug:
print(f"Difference-encoded 16-bit integers")
# The first integer is stored explicitly, as a signed value.
initial_int = common.read_variable_length_integer(stream)
try:
initial = initial_int.to_bytes(2, "big", signed=True)
except OverflowError:
raise common.DecompressError(f"Initial value out of range for 16-bit integer difference encoding: {initial_int:#x}")
if debug:
print(f"\t-> initial: 0x{initial_int:>04x}")
yield initial
count = common.read_variable_length_integer(stream)
if count < 0:
raise common.DecompressError(f"Count cannot be negative: {count}")
# To make the following calculations simpler, the signed initial_int value is converted to unsigned.
current_int = initial_int & 0xffff
for _ in range(count):
# The difference to the previous integer is stored as an 8-bit signed integer.
# The usual variable-length integer format is *not* used here.
diff = int.from_bytes(common.read_exact(stream, 1), "big", signed=True)
# Simulate 16-bit integer wraparound.
current_int = (current_int + diff) & 0xffff
if debug:
print(f"\t-> difference {diff:#x}: 0x{current_int:>04x}")
yield current_int.to_bytes(2, "big", signed=False)
elif kind == 0x06:
# A sequence of 32-bit signed integers, with each integer encoded as a difference relative to the previous integer. The first integer is stored explicitly.
if debug:
print(f"Difference-encoded 32-bit integers")
# The first integer is stored explicitly, as a signed value.
initial_int = common.read_variable_length_integer(stream)
try:
initial = initial_int.to_bytes(4, "big", signed=True)
except OverflowError:
raise common.DecompressError(f"Initial value out of range for 32-bit integer difference encoding: {initial_int:#x}")
if debug:
print(f"\t-> initial: 0x{initial_int:>08x}")
yield initial
count = common.read_variable_length_integer(stream)
assert count >= 0
# To make the following calculations simpler, the signed initial_int value is converted to unsigned.
current_int = initial_int & 0xffffffff
for _ in range(count):
# The difference to the previous integer is stored as a variable-length integer, whose value may be negative.
diff = common.read_variable_length_integer(stream)
# Simulate 32-bit integer wraparound.
current_int = (current_int + diff) & 0xffffffff
if debug:
print(f"\t-> difference {diff:#x}: 0x{current_int:>08x}")
yield current_int.to_bytes(4, "big", signed=False)
else:
raise common.DecompressError(f"Unknown extended code: 0x{kind:>02x}")
elif byte == 0xff:
# End of data marker, always occurs exactly once as the last byte of the compressed data.
if debug:
print("End marker")
# Check that there really is no more data left.
extra = stream.read(1)
if extra:
raise common.DecompressError(f"Extra data encountered after end of data marker (first extra byte: {extra!r})")
break
else:
raise common.DecompressError(f"Unknown tag byte: 0x{byte:>02x}")
def decompress_stream(header_info: common.CompressedHeaderInfo, stream: typing.BinaryIO, *, debug: bool=False) -> typing.Iterator[bytes]:
"""Decompress compressed data in the format used by 'dcmp' (0)."""
decompressed_length = 0
for chunk in decompress_stream_inner(header_info, stream, debug=debug):
if debug:
print(f"\t-> {chunk!r}")
if header_info.decompressed_length % 2 != 0 and decompressed_length + len(chunk) == header_info.decompressed_length + 1:
# Special case: if the decompressed data length stored in the header is odd and one less than the length of the actual decompressed data, drop the last byte.
# This is necessary because nearly all codes generate data in groups of 2 or 4 bytes, so it is basically impossible to represent data with an odd length using this compression format.
decompressed_length += len(chunk) - 1
yield chunk[:-1]
else:
decompressed_length += len(chunk)
yield chunk
if debug:
print(f"Decompressed {decompressed_length:#x} bytes so far")