Helper and include files added

This commit is contained in:
Florian Reitz 2017-12-03 22:18:37 +01:00
parent 0b33b5d385
commit 4be091a1cb
6 changed files with 268 additions and 219 deletions

Binary file not shown.

View File

@ -15,7 +15,9 @@
<None Include="obj\AppleIISd.lst" />
<None Include="README.md" />
<None Include="src\AppleIISd.cfg" />
<None Include="src\AppleIISd.inc" />
<None Include="src\AppleIISd.s" />
<None Include="src\Helper.s" />
</ItemGroup>
<PropertyGroup Label="Globals">
<ProjectGuid>{9EA7EC3D-1771-420F-932F-231A35ED1200}</ProjectGuid>

View File

@ -10,6 +10,12 @@
</None>
<None Include="README.md" />
<None Include="obj\AppleIISd.lst" />
<None Include="src\Helper.s">
<Filter>src</Filter>
</None>
<None Include="src\AppleIISd.inc">
<Filter>src</Filter>
</None>
</ItemGroup>
<ItemGroup>
<Filter Include="src">

44
src/AppleIISd.inc Normal file
View File

@ -0,0 +1,44 @@
;*******************************
;
; Apple][Sd Firmware
; Version 1.0
;
; (c) Florian Reitz, 2017
;
; X register usually contains SLOT16
; Y register is used for counting or SLOT
;
;*******************************
; Memory defines
SLOT16 := $2B ; $s0 -> slot * 16
SLOT := $3D ; $0s
CMDLO := $40
CMDHI := $41
DCMD := $42 ; Command code
BUFFER := $44 ; Buffer address
BLOCK := $46 ; Block number
R30 := $0478
R31 := $04F8
R32 := $0578
R33 := $05F8
CURSLOT := $07F8 ; $Cs
OAPPLE := $C061 ; open apple key
DATA := $C080
CTRL := DATA+1
DIV := DATA+2
SS := DATA+3
; Constants
DUMMY = $FF
FRX = $10 ; CTRL register
ECE = $04
SS0 = $01 ; SS register
SDHC = $10
WP = $20
CD = $40
INITED = $80

View File

@ -10,42 +10,18 @@
;
;*******************************
.import COMMAND
.import SDCMD
.import GETBLOCK
.import CARDDET
.import WRPROT
.import GETR1
.import GETR3
.include "AppleIISd.inc"
.define DEBUG 0
; Memory defines
SLOT16 := $2B ; $s0 -> slot * 16
SLOT := $3D ; $0s
CMDLO := $40
CMDHI := $41
DCMD := $42 ; Command code
BUFFER := $44 ; Buffer address
BLOCK := $46 ; Block number
R30 := $0478
R31 := $04F8
R32 := $0578
R33 := $05F8
CURSLOT := $07F8 ; $Cs
OAPPLE := $C061 ; open apple key
DATA := $C080
CTRL := DATA+1
DIV := DATA+2
SS := DATA+3
; Constants
DUMMY = $FF
FRX = $10 ; CTRL register
ECE = $04
SS0 = $01 ; SS register
SDHC = $10
WP = $20
CD = $40
INITED = $80
; signature bytes
.segment "SLOTROM"
@ -431,190 +407,6 @@ INIT: LDA #$03 ; set SPI mode 3
RTS
;*******************************
;
; Send SD command
; Call with command in CMDHI and CMDLO
;
;*******************************
SDCMD: PHY
LDY #0
@LOOP: LDA (CMDLO),Y
STA DATA,X
@WAIT: BIT CTRL,X ; TC is in N
BPL @WAIT
INY
CPY #6
BCC @LOOP
PLY
RTS
;*******************************
;
; Get R1
; R1 is in A
;
;*******************************
GETR1: LDA #DUMMY
STA DATA,X
@WAIT: BIT CTRL,X
BPL @WAIT
LDA DATA,X ; get response
BIT #$80
BNE GETR1 ; wait for MSB=0
PHA
LDA #DUMMY
STA DATA,X ; send another dummy
PLA ; restore R1
RTS
;*******************************
;
; Get R3
; R1 is in A
; R3 is in scratchpad ram
;
;*******************************
GETR3: JSR GETR1 ; get R1 first
PHA ; save R1
PHY ; save Y
LDY #04 ; load counter
@LOOP: LDA #DUMMY ; send dummy
STA DATA,X
@WAIT: BIT CTRL,X
BPL @WAIT
LDA DATA,X
PHA
DEY
BNE @LOOP ; do 4 times
LDY SLOT
PLA
STA R33,Y ; save R3
PLA
STA R32,Y
PLA
STA R31,Y
PLA
STA R30,Y
PLY ; restore Y
LDA #DUMMY
STA DATA,X ; send another dummy
PLA ; restore R1
RTS
;*******************************
;
; Calculate block address
; Unit number is in $43 DSSS0000
; Block no is in $46-47
; Address is in R30-R33
;
;*******************************
GETBLOCK: PHX ; save X
PHY ; save Y
TXA
TAY ; SLOT16 is now in Y
LDX SLOT
LDA BLOCK ; store block num
STA R33,X ; in R30-R33
LDA BLOCK+1
STA R32,X
LDA #0
STA R31,X
STA R30,X
LDA #$80 ; drive number
AND $43
BEQ @SDHC ; D1
LDA #1 ; D2
STA R31,X
@SDHC: LDA #SDHC
AND SS,Y ; if card is SDHC,
BNE @END ; use block addressing
LDY #9 ; ASL can't be used with Y
@LOOP: ASL R33,X ; mul block num
ROL R32,X ; by 512 to get
ROL R31,X ; real address
ROL R30,X
DEY
BNE @LOOP
@END: PLY ; restore Y
PLX ; restore X
RTS
;*******************************
;
; Send SD command
; Cmd is in A
;
;*******************************
COMMAND: PHY ; save Y
LDY SLOT
STA DATA,X ; send command
LDA R30,Y ; get arg from R30 on
STA DATA,X
LDA R31,Y
STA DATA,X
LDA R32,Y
STA DATA,X
LDA R33,Y
STA DATA,X
LDA #DUMMY
STA DATA,X ; dummy crc
JSR GETR1
PLY ; restore Y
RTS
;*******************************
;
; Check for card detect
;
; C Clear - card in slot
; Set - no card in slot
;
;*******************************
CARDDET: PHA
LDA #CD ; 0: card in
BIT SS,X ; 1: card out
CLC
BEQ @DONE ; card is in
SEC ; card is out
@DONE: PLA
RTS
;*******************************
;
; Check for write protect
;
; C Clear - card not protected
; Set - card write protected
;
;*******************************
WRPROT: PHA
LDA #WP ; 0: write enabled
BIT SS,X ; 1: write disabled
CLC
BEQ @DONE
SEC
@DONE: PLA
RTS
;*******************************
;
; Status request
@ -885,4 +677,3 @@ ACMD4140: .byt $69, $40, $00
.byt $00, $00, $77
ACMD410: .byt $69, $00, $00
.byt $00, $00, $FF

206
src/Helper.s Normal file
View File

@ -0,0 +1,206 @@
;*******************************
;
; Apple][Sd Firmware
; Version 1.0
;
; (c) Florian Reitz, 2017
;
; X register usually contains SLOT16
; Y register is used for counting or SLOT
;
;*******************************
.export COMMAND
.export SDCMD
.export GETBLOCK
.export CARDDET
.export WRPROT
.export GETR1
.export GETR3
.include "AppleIISd.inc"
.segment "EXTROM"
;*******************************
;
; Send SD command
; Call with command in CMDHI and CMDLO
;
;*******************************
SDCMD: PHY
LDY #0
@LOOP: LDA (CMDLO),Y
STA DATA,X
@WAIT: BIT CTRL,X ; TC is in N
BPL @WAIT
INY
CPY #6
BCC @LOOP
PLY
RTS
;*******************************
;
; Get R1
; R1 is in A
;
;*******************************
GETR1: LDA #DUMMY
STA DATA,X
@WAIT: BIT CTRL,X
BPL @WAIT
LDA DATA,X ; get response
BIT #$80
BNE GETR1 ; wait for MSB=0
PHA
LDA #DUMMY
STA DATA,X ; send another dummy
PLA ; restore R1
RTS
;*******************************
;
; Get R3
; R1 is in A
; R3 is in scratchpad ram
;
;*******************************
GETR3: JSR GETR1 ; get R1 first
PHA ; save R1
PHY ; save Y
LDY #04 ; load counter
@LOOP: LDA #DUMMY ; send dummy
STA DATA,X
@WAIT: BIT CTRL,X
BPL @WAIT
LDA DATA,X
PHA
DEY
BNE @LOOP ; do 4 times
LDY SLOT
PLA
STA R33,Y ; save R3
PLA
STA R32,Y
PLA
STA R31,Y
PLA
STA R30,Y
PLY ; restore Y
LDA #DUMMY
STA DATA,X ; send another dummy
PLA ; restore R1
RTS
;*******************************
;
; Calculate block address
; Unit number is in $43 DSSS0000
; Block no is in $46-47
; Address is in R30-R33
;
;*******************************
GETBLOCK: PHX ; save X
PHY ; save Y
TXA
TAY ; SLOT16 is now in Y
LDX SLOT
LDA BLOCK ; store block num
STA R33,X ; in R30-R33
LDA BLOCK+1
STA R32,X
LDA #0
STA R31,X
STA R30,X
LDA #$80 ; drive number
AND $43
BEQ @SDHC ; D1
LDA #1 ; D2
STA R31,X
@SDHC: LDA #SDHC
AND SS,Y ; if card is SDHC,
BNE @END ; use block addressing
LDY #9 ; ASL can't be used with Y
@LOOP: ASL R33,X ; mul block num
ROL R32,X ; by 512 to get
ROL R31,X ; real address
ROL R30,X
DEY
BNE @LOOP
@END: PLY ; restore Y
PLX ; restore X
RTS
;*******************************
;
; Send SD command
; Cmd is in A
;
;*******************************
COMMAND: PHY ; save Y
LDY SLOT
STA DATA,X ; send command
LDA R30,Y ; get arg from R30 on
STA DATA,X
LDA R31,Y
STA DATA,X
LDA R32,Y
STA DATA,X
LDA R33,Y
STA DATA,X
LDA #DUMMY
STA DATA,X ; dummy crc
JSR GETR1
PLY ; restore Y
RTS
;*******************************
;
; Check for card detect
;
; C Clear - card in slot
; Set - no card in slot
;
;*******************************
CARDDET: PHA
LDA #CD ; 0: card in
BIT SS,X ; 1: card out
CLC
BEQ @DONE ; card is in
SEC ; card is out
@DONE: PLA
RTS
;*******************************
;
; Check for write protect
;
; C Clear - card not protected
; Set - card write protected
;
;*******************************
WRPROT: PHA
LDA #WP ; 0: write enabled
BIT SS,X ; 1: write disabled
CLC
BEQ @DONE
SEC
@DONE: PLA
RTS