-- Copyright (C) 1991-2013 Altera Corporation -- Your use of Altera Corporation's design tools, logic functions -- and other software and tools, and its AMPP partner logic -- functions, and any output files from any of the foregoing -- (including device programming or simulation files), and any -- associated documentation or information are expressly subject -- to the terms and conditions of the Altera Program License -- Subscription Agreement, Altera MegaCore Function License -- Agreement, or other applicable license agreement, including, -- without limitation, that your use is for the sole purpose of -- programming logic devices manufactured by Altera and sold by -- Altera or its authorized distributors. Please refer to the -- applicable agreement for further details. -- -- This is a Quartus II output file. It is for reporting purposes only, and is -- not intended for use as a Quartus II input file. This file cannot be used -- to make Quartus II pin assignments - for instructions on how to make pin -- assignments, please see Quartus II help. --------------------------------------------------------------------------------- --------------------------------------------------------------------------------- -- NC : No Connect. This pin has no internal connection to the device. -- DNU : Do Not Use. This pin MUST NOT be connected. -- VCC : Dedicated power pin, which MUST be connected to VCC. -- VCCIO : Dedicated power pin, which MUST be connected to VCC -- of its bank. -- GND : Dedicated ground pin. Dedicated GND pins MUST be connected to GND. -- It can also be used to report unused dedicated pins. The connection -- on the board for unused dedicated pins depends on whether this will -- be used in a future design. One example is device migration. When -- using device migration, refer to the device pin-tables. If it is a -- GND pin in the pin table or if it will not be used in a future design -- for another purpose the it MUST be connected to GND. If it is an unused -- dedicated pin, then it can be connected to a valid signal on the board -- (low, high, or toggling) if that signal is required for a different -- revision of the design. -- GND+ : Unused input pin. It can also be used to report unused dual-purpose pins. -- This pin should be connected to GND. It may also be connected to a -- valid signal on the board (low, high, or toggling) if that signal -- is required for a different revision of the design. -- GND* : Unused I/O pin. Connect each pin marked GND* directly to GND -- or leave it unconnected. -- RESERVED : Unused I/O pin, which MUST be left unconnected. -- RESERVED_INPUT : Pin is tri-stated and should be connected to the board. -- RESERVED_INPUT_WITH_WEAK_PULLUP : Pin is tri-stated with internal weak pull-up resistor. -- RESERVED_INPUT_WITH_BUS_HOLD : Pin is tri-stated with bus-hold circuitry. -- RESERVED_OUTPUT_DRIVEN_HIGH : Pin is output driven high. -- NON_MIGRATABLE: This pin cannot be migrated. --------------------------------------------------------------------------------- --------------------------------------------------------------------------------- -- Pin directions (input, output or bidir) are based on device operating in user mode. --------------------------------------------------------------------------------- Quartus II 32-bit Version 13.0.1 Build 232 06/12/2013 Service Pack 1 SJ Web Edition CHIP "GR8RAM" ASSIGNED TO AN: EPM7128SLC84-15 Pin Name/Usage : Location : Dir. : I/O Standard : Voltage : I/O Bank : User Assignment ------------------------------------------------------------------------------------------------------------- nRES : 1 : input : TTL : : : Y PHI1in : 2 : input : TTL : : : Y VCCINT : 3 : power : : 5.0V : : A[6] : 4 : input : TTL : : : Y A[7] : 5 : input : TTL : : : Y Q3 : 6 : input : TTL : : : Y GND : 7 : gnd : : : : PHI0in : 8 : input : TTL : : : Y A[8] : 9 : input : TTL : : : Y A[9] : 10 : input : TTL : : : Y A[10] : 11 : input : TTL : : : Y A[11] : 12 : input : TTL : : : Y VCCIO : 13 : power : : 5.0V : : TDI : 14 : input : TTL : : : N A[12] : 15 : input : TTL : : : Y A[13] : 16 : input : TTL : : : Y A[14] : 17 : input : TTL : : : Y A[15] : 18 : input : TTL : : : Y GND : 19 : gnd : : : : nWE : 20 : input : TTL : : : Y nDEVSEL : 21 : input : TTL : : : Y nINH : 22 : output : TTL : : : Y TMS : 23 : input : TTL : : : N nIOSTRB : 24 : input : TTL : : : Y D[7] : 25 : bidir : TTL : : : Y VCCIO : 26 : power : : 5.0V : : D[6] : 27 : bidir : TTL : : : Y D[5] : 28 : bidir : TTL : : : Y D[4] : 29 : bidir : TTL : : : Y RESERVED : 30 : : : : : RESERVED : 31 : : : : : GND : 32 : gnd : : : : D[3] : 33 : bidir : TTL : : : Y D[2] : 34 : bidir : TTL : : : Y D[1] : 35 : bidir : TTL : : : Y D[0] : 36 : bidir : TTL : : : Y RESERVED : 37 : : : : : VCCIO : 38 : power : : 5.0V : : nCAS0 : 39 : output : TTL : : : Y nCAS1 : 40 : output : TTL : : : Y nRCS : 41 : output : TTL : : : Y GND : 42 : gnd : : : : VCCINT : 43 : power : : 5.0V : : nMode : 44 : input : TTL : : : Y nROE : 45 : output : TTL : : : Y RA[9] : 46 : output : TTL : : : Y GND : 47 : gnd : : : : RA[10] : 48 : output : TTL : : : Y RA[3] : 49 : output : TTL : : : Y RA[2] : 50 : output : TTL : : : Y RA[5] : 51 : output : TTL : : : Y RA[0] : 52 : output : TTL : : : Y VCCIO : 53 : power : : 5.0V : : RA[1] : 54 : output : TTL : : : Y RA[4] : 55 : output : TTL : : : Y RA[7] : 56 : output : TTL : : : Y RA[6] : 57 : output : TTL : : : Y RA[8] : 58 : output : TTL : : : Y GND : 59 : gnd : : : : nRAS : 60 : output : TTL : : : Y RD[7] : 61 : bidir : TTL : : : Y TCK : 62 : input : TTL : : : N RD[5] : 63 : bidir : TTL : : : Y RD[6] : 64 : bidir : TTL : : : Y RD[4] : 65 : bidir : TTL : : : Y VCCIO : 66 : power : : 5.0V : : nRWE : 67 : output : TTL : : : Y RD[3] : 68 : bidir : TTL : : : Y RD[2] : 69 : bidir : TTL : : : Y RD[1] : 70 : bidir : TTL : : : Y TDO : 71 : output : TTL : : : N GND : 72 : gnd : : : : RD[0] : 73 : bidir : TTL : : : Y nIOSEL : 74 : input : TTL : : : Y A[0] : 75 : input : TTL : : : Y A[1] : 76 : input : TTL : : : Y A[2] : 77 : input : TTL : : : Y VCCIO : 78 : power : : 5.0V : : A[3] : 79 : input : TTL : : : Y A[4] : 80 : input : TTL : : : Y A[5] : 81 : input : TTL : : : Y GND : 82 : gnd : : : : C7M : 83 : input : TTL : : : Y C7M_2 : 84 : input : TTL : : : Y