forked from Apple-2-HW/GR8RAM
223 lines
7.3 KiB
Verilog
Executable File
223 lines
7.3 KiB
Verilog
Executable File
module GR8RAM(C7M, C7M_2, Q3, PHI0in, PHI1in, nRES, nMode,
|
|
A, RA, nWE, D, RD,
|
|
nDEVSEL, nIOSEL, nIOSTRB, nINH,
|
|
nRAS, nCAS0, nCAS1, nRCS, nROE, nRWE);
|
|
|
|
/* Clock, Reset, Mode */
|
|
input C7M, C7M_2, Q3, PHI0in, PHI1in; // Clock inputs
|
|
input nRES, nMode; // Reset, mode
|
|
|
|
/* PHI1 Delay */
|
|
wire [8:0] PHI1b;
|
|
wire PHI1;
|
|
LCELL PHI1b0_MC (.in(PHI1in), .out(PHI1b[0]));
|
|
LCELL PHI1b1_MC (.in(PHI1b[0]), .out(PHI1b[1]));
|
|
LCELL PHI1b2_MC (.in(PHI1b[1]), .out(PHI1b[2]));
|
|
LCELL PHI1b3_MC (.in(PHI1b[2]), .out(PHI1b[3]));
|
|
LCELL PHI1b4_MC (.in(PHI1b[3]), .out(PHI1b[4]));
|
|
LCELL PHI1b5_MC (.in(PHI1b[4]), .out(PHI1b[5]));
|
|
LCELL PHI1b6_MC (.in(PHI1b[5]), .out(PHI1b[6]));
|
|
LCELL PHI1b7_MC (.in(PHI1b[6]), .out(PHI1b[7]));
|
|
LCELL PHI1b8_MC (.in(PHI1b[7]), .out(PHI1b[8]));
|
|
LCELL PHI1b9_MC (.in(PHI1b[8] & PHI1in), .out(PHI1));
|
|
|
|
/* Address Bus, etc. */
|
|
input nDEVSEL, nIOSEL, nIOSTRB; // Card select signals
|
|
input [15:0] A; // 6502 address bus
|
|
input nWE; // 6502 R/W
|
|
output [10:0] RA; // DRAM/ROM address
|
|
assign RA[10:8] = ASel ? Addr[21:19] : Addr[10:8];
|
|
assign RA[7:0] = (~nIOSTRB & FullIOEN) ? Bank+1 :
|
|
(~nIOSTRB & ~FullIOEN) ? {7'b0000001, Bank[0]} :
|
|
(~ASel & nIOSEL & nIOSTRB) ? Addr[18:11] :
|
|
(ASel & nIOSEL & nIOSTRB) ? Addr[7:0] : 8'h00;
|
|
|
|
/* Select Signals */
|
|
wire BankSELA = A[3:0]==4'hF;
|
|
wire SetSELA = A[3:0]==4'hE;
|
|
wire RAMSELA = A[3:0]==4'h3;
|
|
wire AddrHSELA = A[3:0]==4'h2;
|
|
wire AddrMSELA = A[3:0]==4'h1;
|
|
wire AddrLSELA = A[3:0]==4'h0;
|
|
LCELL BankWR_MC (.in(BankSELA & ~nWE & ~nDEVSEL & REGEN), .out(BankWR)); wire BankWR;
|
|
wire SetWR = SetSELA & ~nWE & ~nDEVSEL & REGEN;
|
|
LCELL RAMSEL_MC (.in(RAMSELA & ~nDEVSEL & REGEN), .out(RAMSEL)); wire RAMSEL;
|
|
LCELL AddrHWR_MC (.in(AddrHSELA & ~nWE & ~nDEVSEL & REGEN), .out(AddrHWR)); wire AddrHWR;
|
|
LCELL AddrMWR_MC (.in(AddrMSELA & ~nWE & ~nDEVSEL & REGEN), .out(AddrMWR)); wire AddrMWR;
|
|
LCELL AddrLWR_MC (.in(AddrLSELA & ~nWE & ~nDEVSEL & REGEN), .out(AddrLWR)); wire AddrLWR;
|
|
|
|
/* Data Bus Routing */
|
|
// DRAM/ROM data bus
|
|
wire RDOE = CSDBEN & ~nWE;
|
|
inout [7:0] RD = RDOE ? D[7:0] : 8'bZ;
|
|
// Apple II data bus
|
|
wire DOE = CSDBEN & nWE &
|
|
((~nDEVSEL & REGEN) | ~nIOSEL | (~nIOSTRB & IOROMEN));
|
|
wire [7:0] Dout = (nDEVSEL | RAMSELA) ? RD[7:0] :
|
|
AddrHSELA ? {nMode, Addr[22:16]} :
|
|
AddrMSELA ? Addr[15:8] :
|
|
AddrLSELA ? Addr[7:0] : 8'h00;
|
|
inout [7:0] D = DOE ? Dout : 8'bZ;
|
|
|
|
/* Inhibit output */
|
|
wire AROMSEL;
|
|
LCELL AROMSEL_MC (.in(/*(A[15:12]==4'hD | A[15:12]==4'hE | A[15:12]==4'hF) & nWE & ~MODE*/0), .out(AROMSEL));
|
|
output nINH = AROMSEL ? 1'b0 : 1'bZ;
|
|
|
|
/* DRAM and ROM Control Signals */
|
|
output nRCS = ~((~nIOSEL | (~nIOSTRB & IOROMEN)) & CSDBEN); // ROM chip select
|
|
output nROE = ~nWE; // need this for flash ROM
|
|
output nRWE = nWE | (nDEVSEL & nIOSEL & nIOSTRB); // for ROM & DRAM
|
|
output nRAS = ~(RASr | RASf);
|
|
output nCAS0 = ~(CASr | (CASf & RAMSEL & ~Addr[22])); // DRAM CAS bank 0
|
|
output nCAS1 = ~(CASr | (CASf & RAMSEL & Addr[22])); // DRAM CAS bank 1
|
|
|
|
/* 6502-accessible Registers */
|
|
reg [7:0] Bank = 0; // Bank register for ROM access
|
|
reg [22:0] Addr = 0; // RAM address register
|
|
|
|
/* Increment Control */
|
|
reg IncAddrL = 0, IncAddrM = 0, IncAddrH = 0;
|
|
|
|
/* CAS rising/falling edge components */
|
|
// These are combined to create the CAS outputs.
|
|
reg CASr = 0;
|
|
reg CASf = 0;
|
|
reg RASr = 0;
|
|
reg RASf = 0;
|
|
|
|
/* State Counters */
|
|
reg PHI1reg = 0; // Saved PHI1 at last rising clock edge
|
|
reg PHI0seen = 0; // Have we seen PHI0 since reset?
|
|
reg [2:0] S = 0; // State counter
|
|
reg [3:0] Ref = 0; // Refresh skip counter
|
|
|
|
/* Misc. */
|
|
reg REGEN = 0; // Register enable
|
|
reg IOROMEN = 0; // IOSTRB ROM enable
|
|
reg CSDBEN = 0; // ROM CS, data bus driver gating
|
|
reg ASel = 0; // DRAM address multiplexer select
|
|
reg FullIOEN = 0;
|
|
|
|
// Apple II Bus Compatibiltiy Rules:
|
|
// Synchronize to PHI0 or PHI1. (PHI1 here)
|
|
// PHI1's edge may be -20ns,+10ns relative to C7M.
|
|
// Delay the rising edge of PHI1 to get enough hold time:
|
|
// PHI1modified = PHI1 & PHI1delayed;
|
|
// Only sample /DEVSEL, /IOSEL at these times:
|
|
// 2nd and 3rd rising edge of C7M in PHI0 (S4, S5)
|
|
// all 3 falling edges of C7M in PHI0 (S4, S5, S6)
|
|
// Can sample /IOSTRB at same times as /IOSEL, plus:
|
|
// 1st rising edge of C7M in PHI0 (S3)
|
|
|
|
always @(posedge C7M, negedge nRES) begin
|
|
if (~nRES) begin // Reset
|
|
PHI1reg <= 0;
|
|
PHI0seen <= 0;
|
|
S <= 0;
|
|
Ref <= 0;
|
|
REGEN <= 0;
|
|
IOROMEN <= 0;
|
|
CSDBEN <= 0;
|
|
end else begin
|
|
// Synchronize state counter to S1 when just entering PHI1
|
|
PHI1reg <= PHI1; // Save old PHI1
|
|
if (~PHI1) PHI0seen <= 1; // PHI0seen set in PHI0
|
|
S <= (PHI1 & ~PHI1reg & PHI0seen) ? 4'h1 :
|
|
S==0 ? 3'h0 :
|
|
S==7 ? 3'h7 : S+1;
|
|
|
|
// Refresh counter allows DRAM refresh once every 13 cycles
|
|
if (S==3) Ref <= (Ref[3:2] == 2'b11) ? 4'h0 : Ref+1;
|
|
|
|
// Disable IOSTRB ROM when accessing 0xCFFF.
|
|
if (S==3 & ~nIOSTRB & A[10:0]==11'h7FF) IOROMEN <= 1'b0;
|
|
|
|
// Registers enabled at end of S4 by any IOSEL access (Cn00-CnFF).
|
|
if (S==4 & ~nIOSEL) REGEN <= 1;
|
|
|
|
// Enable IOSTRB ROM when accessing CnXX in IOSEL ROM.
|
|
if (S==4 & ~nIOSEL) IOROMEN <= 1'b1;
|
|
|
|
// Only drive Apple II data bus after state 4 to avoid bus fight.
|
|
// Thus we wait 1.5 7M cycles (210 ns) into PHI0 before driving.
|
|
// Same for driving the ROM/SRAM data bus (RD).
|
|
// Similarly, only select the ROM chip starting at the end of S4.
|
|
// This provides address setup time for write operations and
|
|
// minimizes power consumption.
|
|
CSDBEN <= S==4 | S==5 | S==6 | S==7;
|
|
end
|
|
end
|
|
|
|
always @(negedge C7M, negedge nRES) begin
|
|
if (~nRES) begin
|
|
Addr <= 0;
|
|
Bank <= 0;
|
|
FullIOEN <= 0;
|
|
IncAddrL <= 0;
|
|
IncAddrM <= 0;
|
|
IncAddrH <= 0;
|
|
end else begin
|
|
// Increment address register
|
|
if (S==1 & IncAddrL) begin
|
|
Addr[7:0] <= Addr[7:0]+1;
|
|
IncAddrL <= 0;
|
|
IncAddrM <= Addr[7:0] == 8'hFF;
|
|
end
|
|
if (S==2 & IncAddrM) begin
|
|
Addr[15:8] <= Addr[15:8]+1;
|
|
IncAddrM <= 0;
|
|
IncAddrH <= Addr[15:8] == 8'hFF;
|
|
end
|
|
if (S==3 & IncAddrH) begin
|
|
IncAddrH <= 0;
|
|
Addr[22:16] <= Addr[22:16]+1;
|
|
end
|
|
|
|
// Set register during S6 if accessed.
|
|
if (S==6) begin
|
|
if (BankWR) Bank[7:0] <= D[7:0]; // Bank
|
|
if (SetWR) FullIOEN <= D[7:0] == 8'hE5;
|
|
|
|
IncAddrL <= RAMSEL;
|
|
IncAddrM <= AddrLWR & Addr[7] & ~D[7];
|
|
IncAddrH <= AddrMWR & Addr[15] & ~D[7];
|
|
|
|
if (AddrHWR) Addr[22:16] <= D[6:0]; // Addr hi
|
|
if (AddrMWR) Addr[15:8] <= D[7:0]; // Addr mid
|
|
if (AddrLWR) Addr[7:0] <= D[7:0]; // Addr lo
|
|
end
|
|
end
|
|
end
|
|
|
|
/* DRAM RAS/CAS */
|
|
always @(posedge C7M, negedge nRES) begin
|
|
if (~nRES) begin RASr <= 1'b0; CASr <= 1'b0; ASel <= 1'b0;
|
|
end else begin
|
|
// RAS already asserted in middle of S4,
|
|
// so hold RAS through S5
|
|
RASr <= (S==4 & RAMSEL);
|
|
|
|
// Multiplex DRAM address in at end of S4 through S6.
|
|
ASel = RAMSEL & (S==4 | S==5);
|
|
|
|
// Refresh at end of S1 (i.e. through S2)
|
|
// CAS whenever RAM seleced
|
|
CASr <= (S==1 & Ref==0) | (S==5 & RAMSEL);
|
|
end
|
|
end
|
|
always @(negedge C7M_2, negedge nRES) begin
|
|
if (~nRES) begin RASf <= 1'b0; CASf <= 1'b0;
|
|
end else begin
|
|
// Refresh in S2
|
|
// Row activate in S4 when accessing RAM
|
|
// Hold RAS in S5 when not doing late CAS for write.
|
|
RASf <= (S==2 & Ref==0) | (RAMSEL & (S==4 | (S==5 /*& ~nWE*/)));
|
|
|
|
// CASf gated by nDEVSEL; no need to predicate on RAMSEL.
|
|
// Early CAS in S5 for read operations.
|
|
CASf <= (S==5 & nWE) | (S==6) | (S==7);
|
|
end
|
|
end
|
|
endmodule
|