zjkuki/TommyPROM
1
0
Fork 0
forked from Apple-2-HW/TommyPROM
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Note the connection of the 74LS595 G/OE pin

Browse Source
This commit is contained in:
Tom Nisbet 2020-11-14 14:53:55 -05:00
parent e4703f4a88
commit 2e87e5454b
1 changed files with 4 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
docs/hardware.md
View File

@ -51,6 +51,10 @@ larger chips like the 27C040.
3. The D13 pin controls the output register on the '595 shift registers. The code for
this must be enabled in Configure.h. This pin is not connected when using the 74LS164.
Also note that the 74LS595 has an output enable pin, labeled as either G or OE
in the datasheet. This pin must be connected to ground for both chips or else
they will not produce any signal on their output lines.
The two shift registers can produce a sixteen bit address, although the 28C256 only needs
15 addresses. Chips larger than 64K are supported by using the shift registers for A<sub>0</sub>..A<sub>15</sub>
and connecting Arduino pins D10..D12 to the chip's A<sub>16</sub>..A<sub>18</sub>