From a7624c9c8c7ae424195632891bc8bb4c875d6eb5 Mon Sep 17 00:00:00 2001 From: ole00 Date: Sat, 16 Mar 2019 12:22:51 +0000 Subject: [PATCH] README.md: fixed the mod image link --- README.md | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/README.md b/README.md index ab6d3b9..ac43c2e 100644 --- a/README.md +++ b/README.md @@ -178,11 +178,12 @@ Troubleshooting: * X marks the spot - here make the vertical cut. Do not cut the pins itself! Just cut the trace between the pins, which is only barely visible - without magnification. - ![See the MT3608 image in img directory for more details.] (https://github.com/ole00/afterburner/raw/master/img/mt3608_mod.jpg "EN pin mod") + without magnification. - * solder a thin keynar wire to pin 4 which is your ENable pin. + + ![See the MT3608 image in img directory for more details.](https://github.com/ole00/afterburner/raw/master/img/mt3608_mod.jpg "EN pin mod") + * Once that is done, toggling the EN pin will change the output voltage of the module between 5V (actually slightly less than that) and the