We were passing a reference to MainController in, and calling a
method on it, which is a little convoluted. Now the main controller
subscribes to a "settings applied" event, and handles the update with
an event handler.
No change in behavior.
If you edit an existing symbol, the "is the label unique" test will
always false-positive match itself, so we have to explicitly handle
that case. Dialogs like Edit Instruction Operand make things a bit
more complicated because they don't flush results to the symbol
table immediately, which means the symbol we pass into the Edit Def
Symbol dialog to edit isn't necessarily the one we need to exclude
from the label uniqueness test.
The dialog was using the initial value as both "original" and
"initial", which caused some issues. We now pass both values in.
Also, removed some dead code identified by VS.
The recent tweaks to improve operand editing broke a common case
when creating a project symbol.
Also, tweaked the operand edit case a little more, for the case where
the operand's symbol was entered manually.
Double-clicking on an entry in the symbols window is supposed to take
you to the place where that symbol is defined. This worked for code
labels but not for project/platform symbols. We now jump to the
appropriate EQU statement, if one exists.
The instruction operand editor has a shortcut button for editing a
project symbol. Attempting to change the comment field twice
without closing the operand editor in between would result in a
complaint about duplicate symbol names.
The setting determines whether bulk data is displayed as an unbroken
string of hex digits, or as "$xx,$xx,...". The latter is easier to
read and should be the default.
One place in the code did consider it to be the default, so if the
config file didn't have a value for the setting, the settings UI would
incorrectly show it as enabled.
The existing API was better suited to direct color than indexed
color. The NES visualizer was using a slightly silly hack to avoid
duplicate colors; this has been removed.
The ListView style was using "Stretch" for TextBoxes in the code list,
which caused the background of the entire address / label / operand
field to be drawn in the highlight color, rather than just the area
covered by the text. This is fine for address and label, but it just
felt weird for the operand field because that tends to be very wide
(to accommodate strings, bulk hex data, etc).
There doesn't seem to be a way to specify HorizontalContentAlignment
per-column in WPF. (Note this is different from HorizontalAlignment,
which *is* is a per-column property.)
This changes the style to use HorizontalContentAlignment=Left, so
the highlight just covers the text. The only time this causes a
functional change is when you highlight an operand for a line that
doesn't have a label, because instead of highlighting an empty
rectangle you now see nothing at all. (The address field is still
highlighted though.)
When a code or data line is selected in the code list, if the operand
is an address inside the file, we highlight the address and label.
It's also useful to highlight the other way: when a code or data line
is selected, find all lines whose operands reference it, and highlight
the operand field.
This is a little trickier because there can be multiple references,
but all of the information we need is in the cross-reference table.
End-of-line comments have a couple of guidelines: keep it short, and
don't use non-ASCII characters. Violating these isn't an error, so
we should be making the text blue rather than red.
If you change the selection by double-clicking in one of the side
windows (References, Notes, Symbols, Messages) and then attempt
to navigate with the arrow keys, the program will appear to hang
briefly, then jump to the start or end of the project and shift the
window focus to something else (like the Help menu in the menu bar).
For reasons I don't fully understand, the behavior is fixed by
removing unnecessary calls to codeListView.Focus(). The calls were
intended to shift input focus to the main ListView, but they're no
longer necessary, and appear to upset WPF.
(issue #113)
Altered the address region edit UI a little to improve clarity.
Also, close the hex dump viewer window when Escape is hit. (The
tool windows don't have "cancel" buttons, so the key has to be
handled explicitly.)
Fixed a crash when the listing is refreshed while a .adrend line is
the only thing selected.
Fixed .adrend lines being spammed if the last thing before it is a
multi-byte item, and you edit a comment / note / label on that line.
Harmless, but weird.
Also, added keyboard shortcuts in DefSymbol editor, so you can change
from address to constant with Alt+C.
If you put a value in the "symbol" field of an instruction with an
address operand, you're establishing a symbolic reference to a label
that may be at a different address than the numeric value of the
operand. But if you then hit the "edit label" button, you'll edit
the label at the *numeric* reference address, which can be confusing.
We now disable the create/edit label button when the format has been
set to "symbol".
The button is just a short-cut, so disabling it doesn't prevent the
user from doing anything.
The initial screen is largely blank, with just the four large buttons
for new/open/recent1/recent2. It now also has a "tip of the day" box,
with text and an optional image.
The tips and images are kept in the RuntimeData directory. They're
small enough that they could have been baked into the binary, but
there's enough other stuff going on there that it didn't seem
necessary. Also, if the tips annoy you, removing the tips file will
hide the tip UI.
The index of the tip shown is based on the day of the year, modulo
the number of defined tips. So it will be different every day (with
a bit of hand-waving at the end of the year).
Added a pop-up menu with three options: default (curly quotes),
straight, and Merlin. Removed the "reset to defaults" buttons.
Also, slightly rearranged the Display Format tab so that the quick
set pop-up is on the left, near the items it affects. Moved the
"use comma-separated format for bulk data" checkbox over as well,
since it's part of the set.
This allows regions that hold variable storage to be marked as data
that is initialized by the program before it is used. Previously
the choices were to treat it as bulk data (initialized) or junk
(totally unused), neither of which are correct.
This is functionally equivalent to "junk" as far as source code
generation is concerned (though it doesn't have to be).
For the code/data/junk counter, uninitialized data is counted as
junk, because it technically does not need to be part of the binary.
This action removes operand formatting from all code and data in the
selected range. In most cases this is equivalent to simply editing
the various items and clicking the "default" format radio button,
but the feature can be used to remove data formats that end up inside
multi-byte instructions. Instructions with such formats cause warnings
and were tricky to fix.
Labels embedded in multi-byte items are also tricky to remove, so this
clears those as well. It does not remove visible labels. This is
done in a single pass, which means that labels that would become visible
after the formatting is cleared will still be removed.
Also, fix inclusion of address range end lines when restoring the
selection. Their peculiar nature -- being associated with the offset
of the last byte of multi-byte items -- was interfering with the
selection save code. This does not add them to the selection when
an address region deletion is undone, since technically they weren't
part of the selection.
Also, moved Edit Note higher in the Actions menu.
Changed the code that generates cross-references for pre-labels to
ignore labels in regions with non-addressable parents. Also, changed
the code that complains about references to labels in non-addressable
areas to ignore pre-labels, because it was complaining about references
to pre-labels on region starts that were followed by a non-addressable
region start.
In the address region edit dialog, split up the descriptive text for
the "resize" option to make it easier to see the new end offset and
length. It doesn't look quite right because it's not using the mono
font like the text near the top, but it'll do.
When multiple lines are selected, the Info window now shows the first
line/offset, last line/offset, and bytes spanned by the selection.
This is helpful if you're trying to figure out how big something is.
Modified "jump to" code to understand address range start/end lines.
If there are multiple starts or ends at the same offset, we jump to
the first one in the set, which is suboptimal but simpler to do.
Simplified the API, embedding GoToMode in the Location object (which
is where it really needs to be, to make fwd/back work right).
Updated HTML export to grey out addresses in NON_ADDR sections.
Changed default pseudo-op strings for address regions to ".addrs" and
".adrend", after trying a bunch of things that were worse. Added
definitions for region-end pseudo-ops to Merlin32 and cc65 for display
on screen.
Added regression test 20260 for address region pre-labels.
Fixed handling of leading underscores in platform/project symbols.
These need to be escaped in 64tass output. Updated regression test
20170-external-symbols to check it.
Implemented address region pre-labels. These are useful if the code is
relocating a block from address A to address B, because the code that
does the copying refers to both the "before" address and the "after"
address. Previously you'd give the block the "after" address and the
"before" would just appears as hex, because it's effectively an
external address.
Pre-labels are shown on screen with their address, but no other fields.
Showing the address makes it easy to see the label's value, which isn't
always obvious right before a .arstart. The labels are suppressed if the
address value evaluates to non-addressable.
This defines a new type of symbol, which is external and always global
in scope. Pre-labels affect label localization and must go through
the usual remapping to handle clashes with opcode mnemonics and the
use of leading underscores. Cross-references are computed, but are
associated with the file offset rather than the label line itself.
Added a new filter to the Symbols window ("PreL").
Implemented label input and checking in the address editor. Generally
added highlighting of relevant error labels.
Implemented "is relative" flag. This only affects source code
generation, replacing ".arstart <addr>" with ".arstart *+<value>".
Only output by 64tass and ACME generators.
Added a bold-text summary to radio buttons in address region edit
dialog. This makes it much easier to see what you're doing. Added
a warning to the label edit dialog when a label is being placed in
a non-addressable region.
Modified double-click behavior for .arstart/.arend to jump to the
other end when the opcode is clicked on. This matches the behavior
of instructions with address operands.
Reordered Actions menu, putting "edit operand" at the top.
Fixed AddressMap entry collision testing.
Fixed PRG issue with multiple address regions at offset +000002.
Added regression tests. Most of the complicated stuff with regions
is tested by unit tests inside AddressMap, but we still need to
exercise nested region code generation.
Added support for non-addressable regions, which are useful for things
like file headers stripped out by the system loader, or chunks that
get loaded into non-addressable graphics RAM. Regions are specified
with the "NA" address value. The code list displays the address field
greyed out, starting from zero (which is kind of handy if you want to
know the relative offset within the region).
Putting labels in non-addressable regions doesn't make sense, but
symbol resolution is complicated enough that we really only have two
options: ignore the labels entirely, or allow them but warn of their
presence. The problem isn't so much the label, which you could
legitimately want to access from an extension script, but rather the
references to them from code or data. So we keep the label and add a
warning to the Messages list when we see a reference.
Moved NON_ADDR constants to Address class. AddressMap now has a copy.
This is awkward because Asm65 and CommonUtil don't share.
Updated the asm code generators to understand NON_ADDR, and reworked
the API so that Merlin and cc65 output is correct for nested regions.
Address region changes are now noted in the anattribs array, which
makes certain operations faster than checking the address map. It
also fixes a failure to recognize mid-instruction region changes in
the code analyzer.
Tweaked handling of synthetic regions, which are non-addressable areas
generated by the linear address map traversal to fill in any "holes".
The address region editor now treats attempts to edit them as
creation of a new region.
Updated project file format to save the new map entries.
Tweaked appearance of .arend directives to show the .arstart address
in the operand field. This makes it easier to match them up on screen.
Also, add a synthetic comment on auto-generated .arstart entries.
Added .arstart/.arend to the things that respond to Jump to Operand
(Ctrl+J). Selecting one jumps to the other end. (Well, it jumps
to the code nearest the other, which will do for now.)
Added a menu item to display a text rendering of the address map.
Helpful when things get complicated.
Modified the linear map iterator to return .arend items with the offset
of the last byte in the region, rather than the first byte of the
following region. While the "exclusive end" approach is pretty
common, it caused problems when updating the line list, because it
meant that the .arend directives were outside the range of offsets
being updated (and, for directives at the end of the file, outside
the file itself). This was painful to deal with for partial updates.
Changing this required some relatively subtle changes and annoyed some
of the debug assertions, such as the one where all Line items have
offsets that match the start of a line, but it's the cleaner approach.
Reimplemented "set address" dialog as the Address Region Editor. The
new dialog configures itself differently depending on whether the user
appears to be trying to create, edit, or resize a region. Each mode
has two options, to allow the user to choose between floating and fixed
end points.
The old dialog would allow you to delete an address override by erasing
the address field. Now there's an explicit "delete region" button.
Changed the SetAddress undoable change function to use AddressMapEntry
objects.
We now show detailed information on .arstart/.arend in the Info window
when the lines are selected.
PRG files are now created without specifying a region for the first
two bytes, so the load address exists in a NON_ADDR hole. Fixed a
couple of issues to make that look right.
Split ".org" into ".arstart" and ".arend" (address range start/end).
Address range ends are now shown in the code list view, and the
pseudo-op can be edited in app settings. Address range starts are
now shown after notes and long comments, rather than before, which
brings the on-screen display in sync with generated code.
Reworked the address range editor UI to include the new features.
The implementation is fully broken.
More changes to the AddressMap API, putting the resolved region length
into a separate ActualLength field. Added FindRegion(). Renamed
some things.
Code generation changed slightly: the blank line before a region-end
line now comes after it, and ACME's "} ;!pseudopc" is now just "}".
This required minor updates to some of the regression test results.
This is the first step toward changing the address region map from a
linear list to a hierarchy. See issue #107 for the plan.
The AddressMap class has been rewritten to support the new approach.
The rest of the project has been updated to conform to the new API,
but feature-wise is unchanged. While the map class supports
nested regions with explicit lengths, the rest of the application
still assumes a series of non-overlapping regions with "floating"
lengths.
The Set Address dialog is currently non-functional.
All of the output for cc65 changed because generation of segment
comments has been removed. Some of the output for ACME changed as
well, because we no longer follow "* = addr" with a redundant
pseudopc statement. ACME and 65tass have similar approaches to
placing things in memory, and so now have similar implementations.
The data operand editor determines low vs. high ASCII formatting by
examining the first byte of string data. Unfortunately the test was
broken, and for strings with a 1- or 2-byte length, was testing the
length byte instead of the character data. This is now fixed.
This also changes the way empty strings are handled. Before, they
were allowed but not counted, so you couldn't create an empty string
by itself, but could do it if it were part of a larger group. This
was unnecessarily restrictive. Empty L1/L2/null-term strings are now
allowed.
This means that a buffer full of $00 can be formatted as a big pile
of empty strings, which seems a bit ridiculous but there's no good
reason to obstruct it.
(issue #110)
If you select a line that refers to another line, the target line's
address is highlighted. If you select multiple lines, the highlight
is removed. The code that removes the highlight was inadvertently
resetting the selection, making it impossible to shift-click a
range that ended with a highlighted line.
This is another attempt to fix the ListView keyboard position
behavior. Basic problem: if you change something in the ListView,
the keyboard position is lost, and WPF doesn't expose a nice way to
save and restore it. It appears the way to set the position is by
calling Focus() on the specific item you want to have as the "current"
keyboard position, but you can only do that at certain times.
This attempt removes the grid-splitter resize hack, in favor of just
setting a "needs refocus" flag when we restore the selection set.
This causes Focus() to be called from the StatusChanged callback on
the next event with status="containers generated".
During testing I noticed some other odd behavior: if you used "goto"
to jump to an address, up/down arrows would change focus to a
different control (menu items, grid splitters, etc). The problem
there was that we were setting focus to the ListView control rather
than to a ListViewItem, so arrow keys were in control-traversal mode
rather than list-walk mode. That is also fixed.
(Issue #105)
The DCI string format uses character values where the high bit of the
last byte differs from the rest of the string. Usually all the high
bits are clear except on the last byte, but SourceGen generally allows
either polarity.
This gets a little uncertain with single-character strings, because
SourceGen can't auto-detect DCI very effectively. A series of bytes
with the high bit set could be a single high-ASCII string or a series
of single-byte DCI strings.
The motivation for allowing them is C64 PETSCII. While ASCII allows
"high ASCII" as an escape hatch, PETSCII doesn't have that option, so
there's no way to mark the data as a character or a string. We still
want to do a bit of screening, but if the user specifies a non-ASCII
character set and the selected bytes have their high bits set, we
want to just treat the whole set as 1-byte DCI.
Some minor adjustments were needed for a couple of validity checks
that expected longer strings.
This adds some short DCI strings in different character sets to the
char-encoding regression tests.
(for issue #102)
If you have multiple overlapping segments (say, four 8KB chunks
that all load at $8000), and you use the "goto" command to jump
to address $8100, it should try to jump to that address within
whichever segment you happen to be working (based on the current
line selection). If that address doesn't exist in the current
segment, it's okay to punt and jump to the first occurrence of that
address in the file.
The existing code was always jumping to the first instance.
(related to issue #98)
Code generated by one of the C compilers sets up the stack frame and
then maps the direct page on top of it. If the value at the top of
the stack is 16 bits, it will be referenced via address $ff. The
local variable editor was regarding this as illegal, because lvars are
currently only defined for direct page data, and the value doesn't
entirely fit there (unless you're doing an indirect JMP on an NMOS
6502, in which case it wraps around to $00... but let's ignore that).
The actual max width of a local variable is 257 because of the
possibility of a 16-bit access at $ff.
Older versions of SourceGen don't seem to have an issue when they
encounter this situation, as worrying about (start+width) is really
just an editor affectation. The access itself is still a direct-page
operation. You won't be able to edit the entry without reducing the
length, but otherwise everything works. I don't think there's a need
to bump the file version.
If you changed the width of a column, and then clicked the "toggle
display of cycle counts" button in the toolbar, the column width
would revert. The problem appears unique to that toolbar button,
so for now the fix is localized there. The more general fix is to
ensure that column width changes don't get stomped, but that's a
larger change.
Variables, types, and comments have been updated to reflect the new
naming scheme.
The project file serialization code is untouched, because the data
is output as serialized enumerated values. Adding a string conversion
layer didn't seem worthwhile.
No changes in behavior.
(issue #89)
Before:
Hint As Code Entry Point
Hint As Data Start
Hint As Inline Data
Remove Hints
After:
Tag Address As Code Start Point
Tag Address As Code Stop Point
Tag Bytes As Inline Data
Remove Analyzer Tags
The goal is to reduce confusion. The old nomenclature was causing
problems because it's inaccurate -- they're directives, not hints --
and made it look like you need to mark data items explicitly. The
new action names emphasize the idea that you should be tagging a
single address for start/stop, not blanketing a region.
This change updates the user interface, manual, and tutorials, but
does not change how the items are referred to in code, and does not
change how the program works.
(issue #89)
Modified the asm source generators and on-screen display to show the
DP arg for BBR/BBS as hex. The instructions are otherwise treated
as relative branches, e.g. the DP arg doesn't get factored into the
cross-reference table.
ACME/cc65 put the bit number in the mnemonic, 64tass wants it to be
in the first argument, and Merlin32 wants nothing to do with any of
this because it's incompatible with the 65816.
Added an "all ops" test for W65C02.
We were claiming W65C02S, but it turns out that CPU has the Rockwell
extensions and the STP/WAI instructions. We need to change existing
references to be "WDC 65C02", and add a new CPU definition for the
actual W65C02S chip.
This adds the new CPU definition, the instruction definitions for
the Rockwell extensions, and updates the selectors in project properties
and the instruction chart tool.
This change shouldn't affect any existing projects. Still more to do
before W65C02 works though, mostly because the Rockwell instructions
introduced a new two-argument address mode that has to be handled in
various places.
Sometimes you just want to turn cycle counts on for a bit, and going
through app settings is tiresome. Now there's a toolbar checkbox
for it. The icon isn't ideal, but it'll do.
When editing local variables, the data grid generally has the input
focus, so hitting Enter doesn't close the dialog. Rather than play
games with the focus, just take Ctrl+Enter as a shortcut to close
the dialog (same as notes and long comments).
(I found myself hitting Ctrl+Enter automatically, and being annoyed
when it didn't work, so I figured I'd make it official.)
The "show cycle counts in comments" setting is the only one that
affects both the on-screen display and generated source code. This
felt a little weird, so it's now two independent settings. This
also provided an opportunity to move it to the initial tab, so it's
easier to toggle on and off. Overall it feels less confusing to have
two settings for essentially the same thing, because code generation
is distinct from everything else.
The "spaces between bytes" setting was moved to the Display Format
tab, which seems a better fit.
Documentation and tutorial have been updated.
Also did a little bit of cleanup in EditAppSettings.
