CLK/Machines/Apple/AppleII/LanguageCardSwitches.hpp

//
//  LanguageCardSwitches.hpp
//  Clock Signal
//
//  Created by Thomas Harte on 22/10/2020.
//  Copyright © 2020 Thomas Harte. All rights reserved.
//

#ifndef LanguageCardSwitches_h
#define LanguageCardSwitches_h

namespace Apple {
namespace II {

/*!
	Models the language card soft switches, present on any Apple II with a language card and provided built-in from the IIe onwards.

	Relevant memory accesses should be fed to this class; it'll call:
		* machine.set_language_card_paging() if the proper mapped state changes.
*/
template <typename Machine> class LanguageCardSwitches {
	public:
		struct State {
			/// When RAM is visible in the range $D000–$FFFF:
			/// @c true indicates that bank 1 should be used;
			/// @c false indicates bank 2.
			bool bank1 = false;

			/// @c true indicates that RAM should be readable in the range $D000–$FFFF;
			/// @c false indicates ROM should be readable.
			bool read = false;

			/// @c true indicates that ROM is selected for 'writing' in the range $D000–$FFFF (i.e. writes are a no-op);
			/// @c false indicates that RAM is selected for writing.
			bool write = false;

			bool operator != (const State &rhs) const {
				return
					bank1 != rhs.bank1 ||
					read != rhs.read ||
					write != rhs.write;
			}
		};

		LanguageCardSwitches(Machine &machine) : machine_(machine) {}

		/// Used by an owner to forward any access to $c08x.
		void access(uint16_t address, bool is_read) {
			const auto previous_state = state_;

			// Quotes below taken from Understanding the Apple II, p. 5-28 and 5-29.

			// "A3 controls the 4K bank selection"; 0 = bank 2, 1 = bank 1.
			state_.bank1 = address & 8;

			// "Access to $C080, $C083, $C084, $0087, $C088, $C08B, $C08C, or $C08F sets the READ ENABLE flip-flop"
			// (other accesses reset it)
			state_.read = !(((address&2) >> 1) ^ (address&1));

			// "The WRITE ENABLE' flip-flop is reset by an odd read access to the $C08X range when the PRE-WRITE flip-flop is set."
			if(pre_write_ && is_read && (address&1)) state_.write = false;

			// "[The WRITE ENABLE' flip-flop] is set by an even access in the $C08X range."
			if(!(address&1)) state_.write = true;

			// ("Any other type of access causes the WRITE ENABLE' flip-flop to hold its current state.")

			// "The PRE-WRITE flip-flop is set by an odd read access in the $C08X range. It is reset by an even access or a write access."
			pre_write_ = is_read ? (address&1) : false;

			// Apply whatever the net effect of all that is to the memory map.
			if(previous_state != state_) {
				machine_.set_language_card_paging();
			}
		}

		/// Provides read-only access to the current language card switch state.
		const State &state() const {
			return state_;
		}

		/// Provides relevant parts of the IIgs interface.
		void set_state(uint8_t value) {
			const auto previous_state = state_;

			// Bit 3: 1 => enable ROM, 0 => enable RAM.
			state_.read = !(value & 0x08);
			// Bit 2: 1 => select bank 1, 0 => select bank 2.
			state_.bank1 = value & 0x04;

			if(previous_state != state_) {
				machine_.set_language_card_paging();
			}
		}

	private:
		Machine &machine_;
		State state_;

		// This is an additional flip flop contained on the language card, but
		// it is one step removed from current banking state, so I've excluded it
		// from the State struct.
		bool pre_write_ = false;
};

}
}

#endif /* LanguageCard_h */