CLK/Processors/65816/Implementation/65816Storage.hpp

//
//  65816Implementation.hpp
//  Clock Signal
//
//  Created by Thomas Harte on 23/09/2020.
//  Copyright © 2020 Thomas Harte. All rights reserved.
//

#ifndef WDC65816Implementation_h
#define WDC65816Implementation_h

enum MicroOp: uint8_t {
	/// Fetches a byte from the program counter to the instruction buffer and increments the program counter.
	CycleFetchIncrementPC,
	/// Fetches a byte from the program counter without incrementing it, and throws it away.
	CycleFetchPC,

	/// Fetches a byte from the data address to the data buffer.
	CycleFetchData,
	/// Fetches a byte from the data address to the data buffer and increments the data address.
	CycleFetchIncrementData,
	/// Fetches from the address formed by the low byte of the data address and the high byte
	/// of the instruction buffer, throwing the result away.
	CycleFetchIncorrectDataAddress,

	// Dedicated block-move cycles; these use the data buffer as an intermediary.
	CycleFetchBlockX,
	CycleFetchBlockY,
	CycleStoreBlockY,

	/// Stores a byte from the data buffer.
	CycleStoreData,
	/// Stores a byte to the data address from the data buffer and increments the data address.
	CycleStoreIncrementData,
	/// Stores a byte to the data address from the data buffer and decrements the data address.
	CycleStoreDecrementData,

	/// Pushes a single byte from the data buffer to the stack.
	CyclePush,
	/// Fetches from the current stack location and throws the result away.
	CycleAccessStack,

	/// Sets the data address by copying the final two bytes of the instruction buffer.
	OperationConstructAbsolute,
	/// Sets the data address to the result of (a, x).
	/// TODO: explain better once implemented.
	OperationConstructAbsoluteIndexedIndirect,
	OperationConstructAbsoluteLongX,

	/// Calculates an a, x address; if:
	/// 	there was no carry into the top byte of the address; and
	/// 	the process or in emulation or 8-bit index mode;
	/// then it also skips the next micro-op.
	OperationConstructAbsoluteXRead,

	/// Calculates an a, x address.
	OperationConstructAbsoluteX,

	// These are analogous to the X versions above.
	OperationConstructAbsoluteY,
	OperationConstructAbsoluteYRead,

	/// Constructs the current direct address using the value in the instruction buffer.
	/// Skips the next micro-op if the low byte of the direct register is 0.
	OperationConstructDirect,

	// These follow similar skip-one-if-possible logic to OperationConstructDirect.
	OperationConstructDirectIndexedIndirect,
	OperationConstructDirectIndirect,
	OperationConstructDirectIndirectIndexed,
	OperationConstructDirectIndirectIndexedLong,
	OperationConstructDirectIndirectLong,
	OperationConstructDirectX,
	OperationConstructDirectY,

	/// Performs whatever operation goes with this program.
	OperationPerform,

	/// Copies the current program counter to the data buffer.
	OperationCopyPCToData,
	OperationCopyInstructionToData,

	/// Copies the current PBR to the data buffer.
	OperationCopyPBRToData,

	OperationCopyAToData,
	OperationCopyDataToA,

	/// Complete this set of micr-ops.
	OperationMoveToNextProgram
};

enum Operation: uint8_t {
	// These perform the named operation using the value in the data buffer;
	// they are implicitly AccessType::Read.
	ADC, AND, BIT, CMP, CPX, CPY, EOR, ORA, SBC,

	// These load the respective register from the data buffer;
	// they are implicitly AccessType::Read.
	LDA, LDX, LDY,

	// These move the respective register (or value) to the data buffer;
	// they are implicitly AccessType::Write.
	STA, STX, STY, STZ,

	// These modify the value in the data buffer as part of a read-modify-write.
	ASL, DEC, INC, LSR, ROL, ROR, TRB, TSB,

	// These merely decrement A, increment or decrement X and Y, and regress
	// the program counter only if appropriate.
	MVN, MVP,

	// These use a value straight from the instruction buffer.
	REP, SEP,

	BCC, BCS, BEQ, BMI, BNE, BPL, BRA, BVC, BVS, BRL,

	// These are all implicit.
	CLC, CLD, CLI, CLV, DEX, DEY, INX, INY, NOP, SEC, SED, SEI,
	TAX, TAY, TCD, TCS, TDC, TSC, TSX, TXA, TXS, TXY, TYA, TYX,
	XCE, XBA,

	STP, WAI,

	/// Loads the PC with the operand from the data buffer.
	JMP,

	/// Loads the PC and PBR with the operand from the data buffer.
	JML,

	/// Loads the PC with the operand from the data buffer, replacing
	/// it with the old PC.
	JSR,

	/// Loads the PC and the PBR with the operand from the data buffer,
	/// replacing it with the old PC (and only the PC; PBR not included).
	JSL,
};

class ProcessorStorageConstructor;

class ProcessorStorage {
	public:
		ProcessorStorage();

		struct Instruction {
			size_t program_offset;
			Operation operation;
		};
		Instruction instructions[512 + 3];	// Arranged as:
											//	256 entries: emulation-mode instructions;
											//	256 entries: 16-bit instructions;
											//	reset
											//	NMI
											//	IRQ

	private:
		friend ProcessorStorageConstructor;

		// Registers.
		RegisterPair16 a_;
		RegisterPair16 x_, y_;
		uint16_t pc_, s_;

		// Not
		uint16_t direct_;

		// Banking registers are all stored with the relevant byte
		// shifted up bits 16–23.
		uint32_t data_bank_;	// i.e. DBR.
		uint32_t program_bank_;	// i.e. PBR.


		std::vector<MicroOp> micro_ops_;
};

#endif /* WDC65816Implementation_h */