CLK/Machines/ZX8081/ZX8081.cpp

//
//  ZX8081.cpp
//  Clock Signal
//
//  Created by Thomas Harte on 04/06/2017.
//  Copyright © 2017 Thomas Harte. All rights reserved.
//

#include "ZX8081.hpp"

#include "../../Processors/Z80/Z80.hpp"
#include "../../Storage/Tape/Tape.hpp"
#include "../../Storage/Tape/Parsers/ZX8081.hpp"

#include "../../ClockReceiver/ForceInline.hpp"
#include "../../Configurable/StandardOptions.hpp"

#include "../Utility/MemoryFuzzer.hpp"
#include "../Utility/Typer.hpp"

#include "Keyboard.hpp"
#include "Video.hpp"

#include <cstdint>
#include <memory>
#include <vector>

namespace {
	// The clock rate is 3.25Mhz.
	const unsigned int ZX8081ClockRate = 3250000;
}

namespace ZX8081 {

enum ROMType: uint8_t {
	ZX80 = 0, ZX81
};

std::vector<std::unique_ptr<Configurable::Option>> get_options() {
	return Configurable::standard_options(
		static_cast<Configurable::StandardOptions>(Configurable::AutomaticTapeMotorControl | Configurable::QuickLoadTape)
	);
}

template<bool is_zx81> class ConcreteMachine:
	public Utility::TypeRecipient,
	public CPU::Z80::BusHandler,
	public Machine {
	public:
		ConcreteMachine() :
			z80_(*this),
			tape_player_(ZX8081ClockRate) {
			set_clock_rate(ZX8081ClockRate);
			clear_all_keys();
		}

		forceinline HalfCycles perform_machine_cycle(const CPU::Z80::PartialMachineCycle &cycle) {
			HalfCycles previous_counter = horizontal_counter_;
			horizontal_counter_ += cycle.length;

			if(previous_counter < vsync_start_ && horizontal_counter_ >= vsync_start_) {
				video_->run_for(vsync_start_ - previous_counter);
				set_hsync(true);
				line_counter_ = (line_counter_ + 1) & 7;
				if(nmi_is_enabled_) {
					z80_.set_non_maskable_interrupt_line(true);
				}
				video_->run_for(horizontal_counter_ - vsync_start_);
			} else if(previous_counter < vsync_end_ && horizontal_counter_ >= vsync_end_) {
				video_->run_for(vsync_end_ - previous_counter);
				set_hsync(false);
				if(nmi_is_enabled_) {
					z80_.set_non_maskable_interrupt_line(false);
					z80_.set_wait_line(false);
				}
				video_->run_for(horizontal_counter_ - vsync_end_);
			} else {
				video_->run_for(cycle.length);
			}

			if(is_zx81_) horizontal_counter_ %= HalfCycles(Cycles(207));
			if(!tape_advance_delay_) {
				tape_player_.run_for(cycle.length);
			} else {
				tape_advance_delay_ = std::max(tape_advance_delay_ - cycle.length, HalfCycles(0));
			}

			if(nmi_is_enabled_ && !z80_.get_halt_line() && z80_.get_non_maskable_interrupt_line()) {
				z80_.set_wait_line(true);
			}

			if(!cycle.is_terminal()) {
				return Cycles(0);
			}

			uint16_t address = cycle.address ? *cycle.address : 0;
			bool is_opcode_read = false;
			switch(cycle.operation) {
				case CPU::Z80::PartialMachineCycle::Output:
					if(!(address & 2)) nmi_is_enabled_ = false;
					if(!(address & 1)) nmi_is_enabled_ = is_zx81_;
					if(!nmi_is_enabled_) {
						// Line counter reset is held low while vsync is active; simulate that lazily by performing
						// an instant reset upon the transition from active to inactive.
						if(vsync_) line_counter_ = 0;
						set_vsync(false);
					}
				break;

				case CPU::Z80::PartialMachineCycle::Input: {
					uint8_t value = 0xff;
					if(!(address&1)) {
						if(!nmi_is_enabled_) set_vsync(true);

						uint16_t mask = 0x100;
						for(int c = 0; c < 8; c++) {
							if(!(address & mask)) value &= key_states_[c];
							mask <<= 1;
						}

						value &= ~(tape_player_.get_input() ? 0x00 : 0x80);
					}
					*cycle.value = value;
				} break;

				case CPU::Z80::PartialMachineCycle::Interrupt:
					// resetting event is M1 and IOREQ both simultaneously having leading edges;
					// that happens 2 cycles before the end of INTACK. So the timer was reset and
					// now has advanced twice.
					horizontal_counter_ = HalfCycles(2);

					*cycle.value = 0xff;
				break;

				case CPU::Z80::PartialMachineCycle::Refresh:
					// The ZX80 and 81 signal an interrupt while refresh is active and bit 6 of the refresh
					// address is low. The Z80 signals a refresh, providing the refresh address during the
					// final two cycles of an opcode fetch. Therefore communicate a transient signalling
					// of the IRQ line if necessary.
					if(!(address & 0x40)) {
						z80_.set_interrupt_line(true, Cycles(-2));
						z80_.set_interrupt_line(false);
					}
					if(has_latched_video_byte_) {
						std::size_t char_address = static_cast<std::size_t>((address & 0xfe00) | ((latched_video_byte_ & 0x3f) << 3) | line_counter_);
						uint8_t mask = (latched_video_byte_ & 0x80) ? 0x00 : 0xff;
						if(char_address < ram_base_) {
							latched_video_byte_ = rom_[char_address & rom_mask_] ^ mask;
						} else {
							latched_video_byte_ = ram_[address & ram_mask_] ^ mask;
						}

						video_->output_byte(latched_video_byte_);
						has_latched_video_byte_ = false;
					}
				break;

				case CPU::Z80::PartialMachineCycle::ReadOpcode:
					// Check for use of the fast tape hack.
					if(use_fast_tape_hack_ && address == tape_trap_address_ && tape_player_.has_tape()) {
						uint64_t prior_offset = tape_player_.get_tape()->get_offset();
						int next_byte = parser_.get_next_byte(tape_player_.get_tape());
						if(next_byte != -1) {
							uint16_t hl = z80_.get_value_of_register(CPU::Z80::Register::HL);
							ram_[hl & ram_mask_] = static_cast<uint8_t>(next_byte);
							*cycle.value = 0x00;
							z80_.set_value_of_register(CPU::Z80::Register::ProgramCounter, tape_return_address_ - 1);

							// Assume that having read one byte quickly, we're probably going to be asked to read
							// another shortly. Therefore, temporarily disable the tape motor for 1000 cycles in order
							// to avoid fighting with real time. This is a stop-gap fix.
							tape_advance_delay_ = 1000;
							return 0;
						} else {
							tape_player_.get_tape()->set_offset(prior_offset);
						}
					}

					// Check for automatic tape control.
					if(use_automatic_tape_motor_control_) {
						tape_player_.set_motor_control((address >= automatic_tape_motor_start_address_) && (address < automatic_tape_motor_end_address_));
					}
					is_opcode_read = true;

				case CPU::Z80::PartialMachineCycle::Read:
					if(address < ram_base_) {
						*cycle.value = rom_[address & rom_mask_];
					} else {
						uint8_t value = ram_[address & ram_mask_];

						// If this is an M1 cycle reading from above the 32kb mark and HALT is not
						// currently active, latch for video output and return a NOP. Otherwise,
						// just return the value as read.
						if(is_opcode_read && address&0x8000 && !(value & 0x40) && !z80_.get_halt_line()) {
							latched_video_byte_ = value;
							has_latched_video_byte_ = true;
							*cycle.value = 0;
						} else *cycle.value = value;
					}
				break;

				case CPU::Z80::PartialMachineCycle::Write:
					if(address >= ram_base_) {
						ram_[address & ram_mask_] = *cycle.value;
					}
				break;

				default: break;
			}

			if(typer_) typer_->run_for(cycle.length);

			return HalfCycles(0);
		}

		forceinline void flush() {
			video_->flush();
		}

		void setup_output(float aspect_ratio) override final {
			video_.reset(new Video);
		}

		void close_output() override final {
			video_.reset();
		}

		std::shared_ptr<Outputs::CRT::CRT> get_crt() override final {
			return video_->get_crt();
		}

		std::shared_ptr<Outputs::Speaker> get_speaker() override final {
			return nullptr;
		}

		void run_for(const Cycles cycles) override final {
			z80_.run_for(cycles);
		}

		void configure_as_target(const StaticAnalyser::Target &target) override final {
			is_zx81_ = target.zx8081.isZX81;
			if(is_zx81_) {
				rom_ = zx81_rom_;
				tape_trap_address_ = 0x37c;
				tape_return_address_ = 0x380;
				vsync_start_ = HalfCycles(32);
				vsync_end_ = HalfCycles(64);
				automatic_tape_motor_start_address_ = 0x0340;
				automatic_tape_motor_end_address_ = 0x03c3;
			} else {
				rom_ = zx80_rom_;
				tape_trap_address_ = 0x220;
				tape_return_address_ = 0x248;
				vsync_start_ = HalfCycles(26);
				vsync_end_ = HalfCycles(66);
				automatic_tape_motor_start_address_ = 0x0206;
				automatic_tape_motor_end_address_ = 0x024d;
			}
			rom_mask_ = static_cast<uint16_t>(rom_.size() - 1);

			switch(target.zx8081.memory_model) {
				case StaticAnalyser::ZX8081MemoryModel::Unexpanded:
					ram_.resize(1024);
					ram_base_ = 16384;
					ram_mask_ = 1023;
				break;
				case StaticAnalyser::ZX8081MemoryModel::SixteenKB:
					ram_.resize(16384);
					ram_base_ = 16384;
					ram_mask_ = 16383;
				break;
				case StaticAnalyser::ZX8081MemoryModel::SixtyFourKB:
					ram_.resize(65536);
					ram_base_ = 8192;
					ram_mask_ = 65535;
				break;
			}
			Memory::Fuzz(ram_);

			if(target.loadingCommand.length()) {
				set_typer_for_string(target.loadingCommand.c_str());
			}

			insert_media(target.media);
		}

		bool insert_media(const StaticAnalyser::Media &media) override final {
			if(!media.tapes.empty()) {
				tape_player_.set_tape(media.tapes.front());
			}

			return !media.tapes.empty();
		}

		void set_typer_for_string(const char *string) override final {
			std::unique_ptr<CharacterMapper> mapper(new CharacterMapper(is_zx81_));
			Utility::TypeRecipient::set_typer_for_string(string, std::move(mapper));
		}

		// Obtains the system ROMs.
		bool set_rom_fetcher(const std::function<std::vector<std::unique_ptr<std::vector<uint8_t>>>(const std::string &machine, const std::vector<std::string> &names)> &roms_with_names) override {
			auto roms = roms_with_names(
				"ZX8081",
				{
					"zx80.rom",	"zx81.rom",
				});

			for(std::size_t index = 0; index < roms.size(); ++index) {
				if(!roms[index]) return false;
			}

			zx80_rom_ = std::move(*roms[0]);
			zx81_rom_ = std::move(*roms[1]);
			zx80_rom_.resize(4096);
			zx81_rom_.resize(8192);

			return true;
		}

		// MARK: - Keyboard
		void set_key_state(uint16_t key, bool isPressed) override final {
			if(isPressed)
				key_states_[key >> 8] &= static_cast<uint8_t>(~key);
			else
				key_states_[key >> 8] |= static_cast<uint8_t>(key);
		}

		void clear_all_keys() override final {
			memset(key_states_, 0xff, 8);
		}

		// MARK: - Tape control
		void set_use_fast_tape_hack(bool activate) {
			use_fast_tape_hack_ = activate;
		}

		void set_use_automatic_tape_motor_control(bool enabled) {
			use_automatic_tape_motor_control_ = enabled;
			if(!enabled) {
				tape_player_.set_motor_control(false);
			}
		}
		void set_tape_is_playing(bool is_playing) override final {
			tape_player_.set_motor_control(is_playing);
		}

		// MARK: - Typer timing
		HalfCycles get_typer_delay() override final { return Cycles(7000000); }
		HalfCycles get_typer_frequency() override final { return Cycles(390000); }

		KeyboardMapper &get_keyboard_mapper() override {
			return keyboard_mapper_;
		}

		// MARK: - Configuration options.
		std::vector<std::unique_ptr<Configurable::Option>> get_options() override {
			return ZX8081::get_options();
		}

		void set_selections(const Configurable::SelectionSet &selections_by_option) override {
			bool quickload;
			if(Configurable::get_quick_load_tape(selections_by_option, quickload)) {
				set_use_fast_tape_hack(quickload);
			}

			bool autotapemotor;
			if(Configurable::get_automatic_tape_motor_control_selection(selections_by_option, autotapemotor)) {
				set_use_automatic_tape_motor_control(autotapemotor);
			}
		}

		Configurable::SelectionSet get_accurate_selections() override {
			Configurable::SelectionSet selection_set;
			Configurable::append_quick_load_tape_selection(selection_set, false);
			Configurable::append_automatic_tape_motor_control_selection(selection_set, false);
			return selection_set;
		}

		Configurable::SelectionSet get_user_friendly_selections() override {
			Configurable::SelectionSet selection_set;
			Configurable::append_quick_load_tape_selection(selection_set, true);
			Configurable::append_automatic_tape_motor_control_selection(selection_set, true);
			return selection_set;
		}

	private:
		CPU::Z80::Processor<ConcreteMachine, false, is_zx81> z80_;

		std::shared_ptr<Video> video_;
		std::vector<uint8_t> zx81_rom_, zx80_rom_;

		uint16_t tape_trap_address_, tape_return_address_;
		uint16_t automatic_tape_motor_start_address_, automatic_tape_motor_end_address_;

		std::vector<uint8_t> ram_;
		uint16_t ram_mask_, ram_base_;

		std::vector<uint8_t> rom_;
		uint16_t rom_mask_;

		bool vsync_ = false, hsync_ = false;
		int line_counter_ = 0;

		uint8_t key_states_[8];
		ZX8081::KeyboardMapper keyboard_mapper_;

		HalfClockReceiver<Storage::Tape::BinaryTapePlayer> tape_player_;
		Storage::Tape::ZX8081::Parser parser_;

		bool is_zx81_;
		bool nmi_is_enabled_ = false;

		HalfCycles vsync_start_, vsync_end_;
		HalfCycles horizontal_counter_;

		uint8_t latched_video_byte_ = 0;
		bool has_latched_video_byte_ = false;

		bool use_fast_tape_hack_ = false;
		bool use_automatic_tape_motor_control_;
		HalfCycles tape_advance_delay_ = 0;

		// MARK: - Video
		inline void set_vsync(bool sync) {
			vsync_ = sync;
			update_sync();
		}

		inline void set_hsync(bool sync) {
			hsync_ = sync;
			update_sync();
		}

		inline void update_sync() {
			video_->set_sync(vsync_ || hsync_);
		}
};

}

using namespace ZX8081;

// See header; constructs and returns an instance of the ZX80 or 81.
Machine *Machine::ZX8081(const StaticAnalyser::Target &target_hint) {
	// Instantiate the correct type of machine.
	if(target_hint.zx8081.isZX81)
		return new ZX8081::ConcreteMachine<true>();
	else
		return new ZX8081::ConcreteMachine<false>();
}

Machine::~Machine() {}