Thomas Harte
79707a3c66
Improves filtering slightly, and ensures coefficients are always set when needed.
2019-02-26 22:35:55 -05:00
Thomas Harte
68c5474e36
Reintroduces basic filtering for RGB mode (and introduces it for monochrome composite).
2019-02-26 22:21:49 -05:00
Thomas Harte
cd055a0298
Introduces an upper bound on output resolution, and resolves full-screen clear colour.
2019-02-25 22:07:48 -05:00
Thomas Harte
4c5dee866b
Ensures a proper black fill for Luminance8Phase8 input data.
2019-02-25 21:32:15 -05:00
Thomas Harte
7bb90c78d9
Resolves out-of-bounds initial condition whenever this loop began with start_line = 2047.
...
This, I believe, was the remaining cause of screen flashes.
2019-02-24 19:50:19 -05:00
Thomas Harte
a6e61ef83b
Reverts the clear colour to black.
...
The change was related to debugging; it was not intentionally committed.
2019-02-24 14:36:08 -05:00
Thomas Harte
c775a6c0f8
Introduces but disables a couple of bits of logging that might be helpful again in the future.
2019-02-24 14:30:39 -05:00
Thomas Harte
de7ebead23
Ensures the line_allocation_has_failed_ condition can be exited.
2019-02-21 22:30:41 -05:00
Thomas Harte
c0c4704419
Ensures that failure to allocate a line blocks all other allocations.
2019-02-21 21:38:48 -05:00
Thomas Harte
080f949f89
Ensures OpenGL version is logged prior to any other GL calls.
2019-02-20 20:21:17 -05:00
Thomas Harte
40bfde41cb
Adds an OpenGL version shout out.
2019-02-18 22:01:56 -05:00
Thomas Harte
8ecf885629
Attempts to put in better OpenGL safety rails.
2019-02-18 10:29:40 -05:00
Thomas Harte
7bd721f334
Resolves improper state if an end-of-frame clear is triggered by the first new line.
2019-02-17 21:49:53 -05:00
Thomas Harte
008f50832c
Fixed: the two shaders that use a common input array should use common bindings.
2019-02-10 22:39:24 -05:00
Thomas Harte
c94acb1ca2
With a little more debug logging, discovered an issue with incrementing by four.
2019-02-09 22:45:20 -05:00
Thomas Harte
b3b4b7cf0c
Corrects QAM texture generation logic.
2019-02-09 17:20:13 -05:00
Thomas Harte
eecd4417e7
Bites the bullet and accepts that an additional texture will be useful for QAM separation.
2019-02-09 16:54:31 -05:00
Thomas Harte
6ba1194d74
Sets a clear colour appropriate for phase-linked luminance clearing.
2019-02-03 22:33:04 -05:00
Thomas Harte
b75ad3def2
Updates the multimachine for the ScanTarget world.
2019-02-03 15:07:22 -05:00
Thomas Harte
68d6feaa03
Adds missing includes and gets more explicit about exceptions.
2019-01-25 20:19:50 -05:00
Thomas Harte
6a93d2d006
Corrects some minor spaces-instead-of-tabs errors.
2019-01-24 22:59:03 -05:00
Thomas Harte
a8acadbe13
Gives the shader builders freer rein over what to use as inputs, and turns angles into a varying.
...
All dropping out during the never-ending diagnosis at play here.
2019-01-22 22:20:12 -05:00
Thomas Harte
727f2e2ba0
Updates to the ScanTarget world.
2019-01-17 22:28:02 -05:00
Thomas Harte
d593796dae
Reintroduces less-filtered black and white video where there's no colour burst.
2019-01-16 22:22:29 -05:00
Thomas Harte
ef0dbc2a41
Undoes hard-coding of target framebuffer and display gamma.
2019-01-15 21:33:30 -05:00
Thomas Harte
6c49953115
Returns gamma correction, and corrects Amstrad CPC brightness.
2019-01-14 22:56:08 -05:00
Thomas Harte
55290f4dad
Attempts a fix of frame_was_complete_ logic, to try to eliminate black flashes.
2019-01-14 21:42:45 -05:00
Thomas Harte
bb03d2f2ad
Removes redundant enumeration.
2019-01-13 23:07:50 -05:00
Thomas Harte
7aec5be61a
Cleans up and simplifies shader creation.
2019-01-13 22:49:01 -05:00
Thomas Harte
5d9521fcb9
Advances back to a semi-complete monochrome composite output.
...
i.e. composite phase and amplitude is ostensibly flowing to its new destination.
2019-01-11 22:02:15 -05:00
Thomas Harte
028e530232
Shunts output shader to its proper place.
2019-01-06 22:59:14 -05:00
Thomas Harte
906a2ff6eb
Switches to using clock times for buffer merging and output.
2019-01-06 18:47:01 -05:00
Thomas Harte
c392c819c1
Switches to using the announce is_visible flag to spot line ends.
2019-01-06 13:37:34 -05:00
Thomas Harte
e9d9ff0da0
Enhances ScanTarget to provide additional timing information.
2019-01-05 23:09:17 -05:00
Thomas Harte
46d756d298
Starts towards a flattening of the intermediate video processing.
...
Immediate issue: using x position to index into a bitmap sampled at the input data rate doesn't allow for the disconnection between input rate and output speed provided by the flywheels.
2019-01-05 18:11:39 -05:00
Thomas Harte
fd0ffc7085
Attempts an initial flattening of the pipeline, seemingly losing all output.
2019-01-01 21:02:21 -05:00
Thomas Harte
557a2a0ddf
Moves pipeline setup into draw(), where there'll definitely be an OpenGL context.
2018-11-29 19:41:54 -08:00
Thomas Harte
6be46ae921
Mostly restores Atari 2600 output. PAL colours need work.
2018-11-29 18:26:05 -08:00
Thomas Harte
a25470ee41
Permits tweaking of PhaseLinkedLuminance8 sampling offset.
2018-11-29 16:29:28 -08:00
Thomas Harte
d45c2a1f28
Settles, at least for now, on 15-tap notch filtering.
2018-11-26 22:34:31 -05:00
Thomas Harte
cd1e796093
Attempts to add clearing of the destination framebuffer too.
2018-11-24 23:31:56 -05:00
Thomas Harte
76656fab23
Applies harsher filtering.
2018-11-24 22:39:53 -05:00
Thomas Harte
cf49603a9e
Makes first reintroduction of colour composite decoding.
2018-11-24 22:30:39 -05:00
Thomas Harte
6c92853461
Corrects monochrome composite generation.
2018-11-24 21:55:15 -05:00
Thomas Harte
95685749ad
Attempts fully to implement the S-Video pipeline, without success.
2018-11-24 18:51:07 -05:00
Thomas Harte
6b42b92930
Kills CRTOpenGL.cpp and simplifies shader output very slightly.
2018-11-24 17:37:58 -05:00
Thomas Harte
538c57664f
Establishes attribute bindings to allow multiple shaders to use the same vertex array.
2018-11-24 16:06:26 -05:00
Thomas Harte
a66a20f7fe
Manages to get a brilliant white out of the new pipeline.
2018-11-23 22:54:52 -05:00
Thomas Harte
d4ac79b0af
Attempts to introduce a full-on processing pipeline, in theory putting me two shaders away from completion.
...
Well, subject to finding the last flashing bug and updating the multimachine, anyway.
2018-11-23 22:34:38 -05:00
Thomas Harte
a697a2e4f6
Attempts to complete all input processing — an RGB, S-Video or composite input buffer is now produced.
...
... for all input data types.
2018-11-22 17:20:31 -05:00
