2090 Commits

This Branch

This Branch

All Branches

Author	SHA1	Message	Date
Thomas Harte	cc4cb45e9d	Implemented keyboard input and ensured that the signal generated is marked as composite, putting the colour-suppression ball into the CRT's court.	2017-06-06 09:25:18 -04:00
Thomas Harte	ebbf6e6133	Surprisingly, I think this may actually be the correct output: stopped throwing away the I part of the refresh register and flipped black and white.	2017-06-06 09:03:09 -04:00
Thomas Harte	cba07dec7e	Doubled up to display all eight pixels. To confirm that they are the wrong pixels.	2017-06-06 08:59:00 -04:00
Thomas Harte	6f7037b2b1	Made an initial stab at outputting half the correct pixels.	2017-06-06 08:55:07 -04:00
Thomas Harte	ef4b2f963d	Probably more-or-less corrected. But this is all a bit too interdependent.	2017-06-05 23:52:56 -04:00
Thomas Harte	97f3ff03b6	Restored white background and attempted to correct output timing deficiencies. Incomplete success.	2017-06-05 23:50:04 -04:00
Thomas Harte	2fbc7a2869	Made a very basic attempt at getting something that at least demarcates proper graphics output.	2017-06-05 23:32:49 -04:00
Thomas Harte	4983718df7	Got to outputting something to the CRT. Should be just proper syncs and a paper background. It's not synchronising properly, so something is amiss in my timing.	2017-06-05 10:47:42 -04:00
Thomas Harte	23ca00fd9a	Added memory fuzzing as a way to verify state being written by the Z80. Eventually discovered the HALT problem as fixed in the last commit, so have stripped away the caveman stuff again.	2017-06-05 10:36:07 -04:00
Thomas Harte	3df6eba237	Fixed: my HALT line wasn't actually halting. NOPs followed, but the PC just kept counting.	2017-06-05 10:35:03 -04:00
Thomas Harte	893f61b490	Attempted specifically to reproduce the 1kb ZX80 memory map in the hope of getting compact lines and in case mirroring is why I'm getting completely empty video reads. Still no action.	2017-06-05 09:38:49 -04:00
Thomas Harte	e940e02126	Added a short circuit to set_interrupt_line, mostly to make breakpoints slightly more convenient to place.	2017-06-05 09:37:19 -04:00
Thomas Harte	7e3a46c33e	[Re]discovered that sync may also be a product of the interrupt cycle. So started looking into that.	2017-06-04 21:54:55 -04:00
Thomas Harte	7f743c6fb0	Got explicit about permitted type conversions.	2017-06-04 18:40:59 -04:00
Thomas Harte	73654d51dd	Wired up actually to run.	2017-06-04 18:37:13 -04:00
Thomas Harte	096551ab3e	Made a first attempt to hash out the ZX80's bus. Video output isn't yet going though. Can't seem to find clarity on whether horizontal sync is really programmatic. Let's see.	2017-06-04 18:32:23 -04:00
Thomas Harte	c485c460f7	Imported the ZX80 and 81 system ROMs (though not publicly), added enough code to post their contents into C++ world.	2017-06-04 18:08:35 -04:00
Thomas Harte	b0a7c58287	Fixed project to point to the XIB I actually want to keep; fixed that XIB to have the correct contents.	2017-06-04 17:57:37 -04:00
Thomas Harte	d2637123c4	Added necessary support to get as far as an empty window when attempting to load a piece of ZX80 software.	2017-06-04 17:55:19 -04:00
Thomas Harte	02b7c3d1b0	Added the necessary wiring to get into a ZX80/81-oriented part of the static analyser, which could in principle post a ZX80 target.	2017-06-04 17:04:06 -04:00
Thomas Harte	8c1769f157	Made a quick attempt at serialising from ZX80 .O to waves.	2017-06-04 16:59:26 -04:00
Thomas Harte	655809517c	Ensured that there is a subclass of file that is entrusted to load .O/.80 files, and that the code routes such files to it, noting that it should consider whether a ZX80 is required.	2017-06-04 16:37:03 -04:00
Thomas Harte	2190f60a89	Reinstated manual-by-stealth secondary usage of the Zexall test as a benchmarking tool.	2017-06-04 15:46:35 -04:00
Thomas Harte	18faebc93c	Merge pull request #130 from TomHarte/Bits35 ... Corrects bit 3 & 5 emulation for everything except BIT n, (HL)	2017-06-04 15:42:22 -04:00
Thomas Harte	0eebfdb4cc	Expanded emulation of memptr, though still incomplete. Reverted zexall tests to zexdoc. Will probably leave memptr until I've an emulated machine as test suites seem to exist, but they're machine-dependant, so figuring out how to isolate them from an architecture will be a lot easier if and when I have functioning machines.	2017-06-04 15:39:37 -04:00
Thomas Harte	7811374b0f	Started sneaking in memptr emulation, hopefully to get to a working BIT (hl).	2017-06-04 15:07:07 -04:00
Thomas Harte	a2f01b4a46	Corrected CPx bit 3 and 5 flags. I think only BIT n, (HL) with the famous MEMPTR reliance is preventing a complete pass by Zexall now.	2017-06-04 14:59:18 -04:00
Thomas Harte	f5c910beb7	Fixed LDIR/LDDR bit 3/5 flags. This seems once again to satisfy FUSE.	2017-06-04 14:18:04 -04:00
Thomas Harte	4e014ca748	Ensured BIT takes bits 5 and 3 from the computed address if used on indexed pages. That seems to cover 97 failures out of 100?	2017-06-04 14:13:38 -04:00
Thomas Harte	87095b0578	Undid consciously discard for bits 3 and 5 in the FUSE tests. Back to 100 failures.	2017-06-04 14:04:26 -04:00
Thomas Harte	fba6ac2b4c	Merge pull request #129 from TomHarte/TestMachineCommonality ... Generalises the Z80 test machine's trap handler also to cover the 6502	2017-06-03 22:27:55 -04:00
Thomas Harte	1a811b1ab1	Eliminated the function call inherent to every decode, and also moved the fixed table of operations into a non-templated base class.	2017-06-03 22:19:35 -04:00
Thomas Harte	c26349624c	This, of course, should be inline to gain any benefit from the slightly-tortured private implementation.	2017-06-03 22:00:57 -04:00
Thomas Harte	b642d9f712	Eliminates the 6502's specialised jam handler in favour of the generic trap handler, and simplifies the lookup costs of that as it's otherwise doubling execution costs.	2017-06-03 21:54:42 -04:00
Thomas Harte	fd6623b5a5	Attempted to bring a common hierarchy to the Z80 and 6502 test machines, particularly with a view to eliminating the special-case Jam stuff on the 6502.	2017-06-03 21:22:16 -04:00
Thomas Harte	0b2a3f18bc	Merge pull request #128 from TomHarte/Scheduling ... Eliminates the micro-op scheduler	2017-06-03 20:32:39 -04:00
Thomas Harte	b304c3a4b9	Eliminated the 6502's reliance on the micro-op scheduler.	2017-06-03 20:30:07 -04:00
Thomas Harte	3ceef2005b	Pulled the Z80 from the MicroOpScheduler inheritance tree as it barely uses the thing, and that allows me to make the MicroOp structure private.	2017-06-03 19:17:34 -04:00
Thomas Harte	0f438f524b	Merge pull request #124 from TomHarte/Z80 ... Introduces a decent but as-yet-imperfect implementation of the Z80 processor.	2017-06-03 19:11:21 -04:00
Thomas Harte	24c84ca6f5	Commented out as-yet-unimplemented features.	2017-06-03 19:10:23 -04:00
Thomas Harte	7898f643ac	Added bus request/acknowledge logic.	2017-06-03 19:09:47 -04:00
Thomas Harte	7bd45d308a	Error was simply failure of the interrupt-mode setter. Fixed.	2017-06-03 18:58:13 -04:00
Thomas Harte	b3da16911f	Tweaked timing of mode 0, per contradictory information. Wrote a failing test of mode 2.	2017-06-03 18:42:54 -04:00
Thomas Harte	e52892f75b	Added a test of interrupt mode 1.	2017-06-03 18:16:13 -04:00
Thomas Harte	8c41a0f0ed	Added a test to confirm interrupts are disabled, and a response to the interrupt cycle within the all-RAM machine.	2017-06-03 17:53:44 -04:00
Thomas Harte	3e9212aaff	Plumbed through to allow interrupt tests, wrote an NMI test, corrected the error revealed.	2017-06-03 17:41:45 -04:00
Thomas Harte	a2ec902773	Made an attempt at implementing all three modes of IRQ.	2017-06-03 17:07:05 -04:00
Thomas Harte	1c0130fd02	Cleaned up with a macro, and decided to make absolutely sure that DecodeOperation is functioning as intended by removing the MoveToNextProgram from fetch-decode-execute.	2017-06-03 12:19:25 -04:00
Thomas Harte	3e3d6f97f4	Edged towards being able to implement interrupt mode 0: created a special-case micro-op for incrementing the PC, and formalised that DecodeOperation is a terminal operation.	2017-06-03 12:16:21 -04:00
Thomas Harte	9c3bda0111	Attempted to round out NMI handling.	2017-06-03 11:30:12 -04:00