cc65/libsrc/nes/tgi/nes-64-56-2.s

;
; Graphics driver for the lores 64x56x2 mode on the NES
;
; Stefan Haubenthal, 2009-03-10
; Based on Maciej Witkowiak's line routine.
;

        .include        "zeropage.inc"

        .include        "tgi-kernel.inc"
        .include        "tgi-error.inc"
        .include        "nes.inc"
        .include        "get_tv.inc"
        .import         _clrscr, setcursor, putchar
        .import         paldata

        .macpack        generic
        .macpack        module


; ------------------------------------------------------------------------
; Header. Includes jump table and constants.

        module_header   _nes_64_56_2_tgi

; First part of the header is a structure that has a magic and defines the
; capabilities of the driver

        .byte   $74, $67, $69           ; "tgi"
        .byte   TGI_API_VERSION         ; TGI API version number
        .addr   $0000                   ; Library reference
xres:   .word   charsperline*2          ; Max X resolution
yres:   .word   56                      ; Max Y resolution
        .byte   2                       ; Number of drawing colors
        .byte   1                       ; Number of screens available
        .byte   2                       ; System font X size
        .byte   2                       ; System font Y size
        .word   $0100                   ; Aspect ratio
        .byte   0                       ; TGI driver flags

; Next comes the jump table. Currently all entries must be valid and may point
; to an RTS for test versions (function not implemented).

        .addr   INSTALL
        .addr   UNINSTALL
        .addr   INIT
        .addr   DONE
        .addr   GETERROR
        .addr   CONTROL
        .addr   CLEAR
        .addr   SETVIEWPAGE
        .addr   SETDRAWPAGE
        .addr   SETCOLOR
        .addr   SETPALETTE
        .addr   GETPALETTE
        .addr   GETDEFPALETTE
        .addr   SETPIXEL
        .addr   GETPIXEL
        .addr   LINE
        .addr   BAR
        .addr   TEXTSTYLE
        .addr   OUTTEXT

; ------------------------------------------------------------------------
; Data.

; Variables mapped to the zero page segment variables. Some of these are
; used for passing parameters to the driver.

X1              = ptr1
Y1              = ptr2
X2              = ptr3
Y2              = ptr4
RADIUS          = tmp1

ADDR            = tmp1
TEMP            = tmp3
TEMP2           = tmp4
TEMP3           = sreg
TEMP4           = sreg+1

; Absolute variables used in the code

.bss

MEM:            .res    charsperline*2*56/4
MEMEND:
ERROR:          .res    1       ; Error code
COLOR:          .res    1       ; Current color
PALETTE:        .res    2       ; The current palette

; Constants and tables

.rodata

DEFPALETTE:     .byte   $0, $1
OFFSET:         .byte   8, 4, 2, 1
;                       00  00  00  00  01  01  01  01
;                       00  01  10  11  00  01  10  11
CODE:           .byte   32, 29, 26, 25, 28, 24+128, 31+128, 30+128
;                       10  10  10  10  11  11  11  11
;                       00  01  10  11  00  01  10  11
                .byte   30, 31, 24, 28+128, 25+128, 26+128, 29+128, 32+128

.code

; ------------------------------------------------------------------------
; INSTALL routine. Is called after the driver is loaded into memory. May
; initialize anything that has to be done just once. Is probably empty
; most of the time.
;
; Must set an error code: NO
;

INSTALL:
        jsr     _get_tv
        cmp     #TV::NTSC
        beq     ntsc
; TODO ROM!
        inc     yres
        inc     yres
ntsc:;  rts

; ------------------------------------------------------------------------
; UNINSTALL routine. Is called before the driver is removed from memory. May
; clean up anything done by INSTALL but is probably empty most of the time.
;
; Must set an error code: NO
;

UNINSTALL:
        rts

; ------------------------------------------------------------------------
; INIT: Changes an already installed device from text mode to graphics
; mode.
; Note that INIT/DONE may be called multiple times while the driver
; is loaded, while INSTALL is only called once, so any code that is needed
; to initializes variables and so on must go here. Setting palette and
; clearing the screen is not needed because this is called by the graphics
; kernel later.
; The graphics kernel will never call INIT when a graphics mode is already
; active, so there is no need to protect against that.
;
; Must set an error code: YES
;

INIT:

; Done, reset the error code

        lda     #TGI_ERR_OK
        sta     ERROR
;       rts

; ------------------------------------------------------------------------
; DONE: Will be called to switch the graphics device back into text mode.
; The graphics kernel will never call DONE when no graphics mode is active,
; so there is no need to protect against that.
;
; Must set an error code: NO
;

DONE:
        rts

; ------------------------------------------------------------------------
; GETERROR: Return the error code in A and clear it.

GETERROR:
        lda     ERROR
        ldx     #TGI_ERR_OK
        stx     ERROR
        rts

; ------------------------------------------------------------------------
; CONTROL: Platform/driver specific entry point.
;
; Must set an error code: YES
;

CONTROL:
        lda     #TGI_ERR_INV_FUNC
        sta     ERROR
        rts

; ------------------------------------------------------------------------
; CLEAR: Clears the screen.
;
; Must set an error code: NO
;

CLEAR:
        ldx     #<MEM
        stx     TEMP
        ldx     #>MEM
        stx     TEMP+1
        lda     #0
        tay
@L1:    sta     (TEMP),y
        iny
        bne     @L1
        inc     TEMP+1
        inx
        cpx     #>MEMEND
        bne     @L1
        jmp     _clrscr

; ------------------------------------------------------------------------
; SETCOLOR: Set the drawing color (in A). The new color is already checked
; to be in a valid range (0..maxcolor-1).
;
; Must set an error code: NO (will only be called if color ok)
;

SETCOLOR:
        sta     COLOR
;       rts

; ------------------------------------------------------------------------
; SETVIEWPAGE: Set the visible page. Called with the new page in A (0..n).
; The page number is already checked to be valid by the graphics kernel.
;
; Must set an error code: NO (will only be called if page ok)
;

SETVIEWPAGE:
;       rts

; ------------------------------------------------------------------------
; SETDRAWPAGE: Set the drawable page. Called with the new page in A (0..n).
; The page number is already checked to be valid by the graphics kernel.
;
; Must set an error code: NO (will only be called if page ok)
;

SETDRAWPAGE:
        rts

; ------------------------------------------------------------------------
; SETPALETTE: Set the palette (not available with all drivers/hardware).
; A pointer to the palette is passed in ptr1. Must set an error if palettes
; are not supported
;
; Must set an error code: YES
;

SETPALETTE:
; Wait for v-blank
@wait:  lda     PPU_STATUS
        bpl     @wait

        lda     #$3F
        sta     PPU_VRAM_ADDR2
        lda     #$00
        sta     PPU_VRAM_ADDR2

        ldy     #0
        lda     (ptr1),y
        sta     PALETTE
        tax
        lda     paldata,x
;       sta     PPU_VRAM_IO

        iny
        lda     (ptr1),y
        sta     PALETTE+1
        tax
        lda     paldata,x
        sta     PPU_VRAM_IO

        lda     #TGI_ERR_OK
        sta     ERROR
        rts

; ------------------------------------------------------------------------
; GETPALETTE: Return the current palette in A/X. Even drivers that cannot
; set the palette should return the default palette here, so there's no
; way for this function to fail.
;
; Must set an error code: NO
;

GETPALETTE:
        lda     #<PALETTE
        ldx     #>PALETTE
        rts

; ------------------------------------------------------------------------
; GETDEFPALETTE: Return the default palette for the driver in A/X. All
; drivers should return something reasonable here, even drivers that don't
; support palettes, otherwise the caller has no way to determine the colors
; of the (not changeable) palette.
;
; Must set an error code: NO (all drivers must have a default palette)
;

GETDEFPALETTE:
        lda     #<DEFPALETTE
        ldx     #>DEFPALETTE
        rts

; ------------------------------------------------------------------------
; SETPIXEL: Draw one pixel at X1/Y1 = ptr1/ptr2 with the current drawing
; color. The coordinates passed to this function are never outside the
; visible screen area, so there is no need for clipping inside this function.
;
; Must set an error code: NO
;

SETPIXEL:
        ldx     Y1              ; y+2<yres
        inx
        inx
        cpx     yres
        bcc     @L2
        ldx     X1              ; x+2<xres
        inx
        inx
        cpx     xres
        bcc     @L2
        rts
@L2:    lda     X1
        lsr
        tay
        lda     Y1
        lsr
        tax
        clc
        jsr     setcursor
        jsr     CALC
        ldx     COLOR
        bne     @set2
        eor     #%00001111
@set2:  sta     TEMP3

        lda     (TEMP),y
        ldx     COLOR
        bne     @set
        and     TEMP3
        .byte   $2c
@set:   ora     TEMP3
        sta     (TEMP),y
        tax
        lda     CODE,x
@normal:jmp     putchar

; ------------------------------------------------------------------------
; GETPIXEL: Read the color value of a pixel and return it in A/X. The
; coordinates passed to this function are never outside the visible screen
; area, so there is no need for clipping inside this function.


GETPIXEL:
        jsr     CALC
        sta     TEMP3
        lda     (TEMP),y
        and     TEMP3
        beq     @L1
        lda     #1
@L1:    ldx     #0
        rts

; ------------------------------------------------------------------------
; BAR: Draw a filled rectangle with the corners X1/Y1, X2/Y2, where
; X1/Y1 = ptr1/ptr2 and X2/Y2 = ptr3/ptr4 using the current drawing color.
; Contrary to most other functions, the graphics kernel will sort and clip
; the coordinates before calling the driver, so on entry the following
; conditions are valid:
;       X1 <= X2
;       Y1 <= Y2
;       (X1 >= 0) && (X1 < XRES)
;       (X2 >= 0) && (X2 < XRES)
;       (Y1 >= 0) && (Y1 < YRES)
;       (Y2 >= 0) && (Y2 < YRES)
;
; Must set an error code: NO
;

BAR:
        inc     Y2
@L1:    lda     X1
        pha
@L2:    jsr     SETPIXEL
        inc     X1
        lda     X2
        cmp     X1
        bne     @L2
        pla
        sta     X1
        inc     Y1
        lda     Y2
        cmp     Y1
        bne     @L1
        rts

; ------------------------------------------------------------------------
; TEXTSTYLE: Set the style used when calling OUTTEXT. Text scaling in X and Y
; direction is passend in X/Y, the text direction is passed in A.
;
; Must set an error code: NO
;

TEXTSTYLE:
        rts

; ------------------------------------------------------------------------
; OUTTEXT: Output text at X/Y = ptr1/ptr2 using the current color and the
; current text style. The text to output is given as a zero terminated
; string with address in ptr3.
;
; Must set an error code: NO
;

OUTTEXT:
        lda     ptr1
        lsr
        tay
        lda     ptr2
        lsr
        tax
        clc
        jsr     setcursor
        ldy     #0
@L1:    lda     (ptr3),y
        jsr     putchar
        iny
        cmp     #$0
        bne     @L1
        rts

; ------------------------------------------------------------------------
; Calculate all variables to plot the pixel at X1/Y1. If the point is out
; of range, a carry is returned and INRANGE is set to a value !0 zero. If
; the coordinates are valid, INRANGE is zero and the carry clear.

CALC:   lda     xres
        sta     TEMP
        lda     #0
        sta     TEMP+1
        ldy     Y1
@L1:    lda     TEMP
        add     xres
        lsr
        sta     TEMP
        lda     TEMP+1
        adc     #0
        lsr
        sta     TEMP+1
        dey
        bne     @L1
        lda     TEMP
        add     X1
        lsr
        sta     TEMP
        lda     TEMP+1
        adc     #0
        lsr
        sta     TEMP+1
        lda     TEMP
        add     #<MEM
        sta     TEMP
        lda     TEMP+1
        adc     #>MEM
        sta     TEMP+1

        lda     X1
        and     #%00000001
        sta     TEMP3
        lda     Y1
        asl
        and     #%00000010
        ora     TEMP3
        tax
        lda     OFFSET,x
        rts

; ------------------------------------------------------------------------

.include        "../../tgi/tgidrv_line.inc"