cc65/libsrc/telestrat/tgi/telestrat-228-200-3.s

;
; Graphics driver for the 228x200x3 palette mode on the Telestrat
;
; Jede (jede@oric.org), 2017-10-15

        .include        "zeropage.inc"

        .include        "tgi-kernel.inc"
        .include        "tgi-error.inc"
        .include        "telestrat.inc"

        .macpack        generic
        .macpack        module

XSIZE   =       6               ; System font width
YSIZE   =       8               ; System font height

; ------------------------------------------------------------------------
; Header. Includes jump table and constants.

        module_header   _telestrat_228_200_3_tgi

; The first part of the header is a structure that has a signature,
; and defines the capabilities of the driver.

        .byte   "tgi"
        .byte   TGI_API_VERSION ; TGI API version number
        .addr   $0000           ; Library reference
        .word   228             ; x resolution
        .word   200             ; y resolution
        .byte   3               ; Number of drawing colors
        .byte   1               ; Number of screens available
        .byte   XSIZE           ; System font x size
        .byte   YSIZE           ; System font y size
        .word   $011C           ; Aspect ratio (based on 4/3 display)
        .byte   0               ; TGI driver flags

; Next comes the jump table. Currently, all entries must be valid;
; and, may point to an RTS, for test versions (function not implemented).

        .addr   INSTALL
        .addr   UNINSTALL
        .addr   INIT
        .addr   DONE
        .addr   GETERROR
        .addr   CONTROL
        .addr   CLEAR
        .addr   SETVIEWPAGE
        .addr   SETDRAWPAGE
        .addr   SETCOLOR
        .addr   SETPALETTE
        .addr   GETPALETTE
        .addr   GETDEFPALETTE
        .addr   SETPIXEL
        .addr   GETPIXEL
        .addr   LINE
        .addr   BAR
        .addr   CIRCLE
        .addr   TEXTSTYLE
        .addr   OUTTEXT

; ------------------------------------------------------------------------
; Data.

; Variables mapped to the zero-page segment variables. These are
; used for passing parameters to the driver.

X1      :=      ptr1
Y1      :=      ptr2
X2      :=      ptr3
Y2      :=      ptr4

; Absolute variables used in the code

.bss

ERROR:          .res    1       ; Error code
MODE:           .res    1       ; Graphics mode
PALETTE:        .res    2

; Constant table

.rodata

; Default colors: black background, white foreground
; (The third "color" actually flips a pixel
; between the foreground and background colors.)
;
DEFPALETTE:     .byte   0, 1

.code

; ------------------------------------------------------------------------
; INIT: Changes an already installed device from text mode to graphics mode.
; Note that INIT/DONE may be called multiple times while the driver
; is loaded, while INSTALL is called only once. So, any code that is needed
; to initialize variables and so on must go here. Setting palette and
; clearing the screen are not needed because they are called by the graphics
; kernel later.
; The graphics kernel never will call INIT when a graphics mode is already
; active, so there is no need to protect against that.
;
; Must set an error code: YES
;

INIT:

; Switch into graphics mode.
        BRK_TELEMON(XHIRES)
       
; Done, reset the error code.

        lda     #TGI_ERR_OK
        sta     ERROR
        rts

; ------------------------------------------------------------------------
; GETERROR: Return the error code in A, and clear it.

GETERROR:
        ldx     #TGI_ERR_OK
        lda     ERROR
        stx     ERROR
        rts
; ------------------------------------------------------------------------
; INSTALL routine. Is called after the driver is loaded into memory. May
; initialize anything that has to be done just once. Is probably empty
; most of the time.
;
; Must set an error code: NO
;

INSTALL:

; ------------------------------------------------------------------------
; UNINSTALL routine. Is called before the driver is removed from memory. May
; clean up anything done by INSTALL, but probably is empty most of the time.
;
; Must set an error code: NO
;

UNINSTALL:
        rts

; ------------------------------------------------------------------------
; DONE: Will be called to switch the graphics device back into text mode.
; The graphics kernel never will call DONE when no graphics mode is active,
; so there is no need to protect against that.
;
; Must set an error code: NO
;

DONE:
        BRK_TELEMON(XTEXT)
        rts
; ------------------------------------------------------------------------
; CONTROL: Platform-/driver-specific entry point.
;
; Must set an error code: YES
;

CONTROL:
        ; not done yet
        rts

; ------------------------------------------------------------------------
; CLEAR: Clears the screen.
;
; Must set an error code: NO
;

CLEAR:
        BRK_TELEMON(XEFFHI)
        rts

; ------------------------------------------------------------------------
; SETVIEWPAGE: Set the visible page. Called with the new page in A (0..n).
; The page number already is checked to be valid, by the graphics kernel.
;
; Must set an error code: NO (will be called only if page OK)
;

SETVIEWPAGE:

; ------------------------------------------------------------------------
; SETDRAWPAGE: Set the drawable page. Called with the new page in A (0..n).
; The page number already is checked to be valid, by the graphics kernel.
;
; Must set an error code: NO (will be called only if page OK)
;

SETDRAWPAGE:
        rts

; ------------------------------------------------------------------------
; SETCOLOR: Set the drawing color (in A). The new color already is checked
; to be in a valid range (0..maxcolor-1).
;
; Must set an error code: NO (will be called only if color OK)
;

SETCOLOR:
        ; not done yet
        rts

; ------------------------------------------------------------------------
; SETPALETTE: Set the palette (not available with all drivers/hardware).
; A pointer to the palette is passed in ptr1. Must set an error if palettes
; are not supported.
;
; Must set an error code: YES
;

SETPALETTE:
        ; not done yet
        rts

flipcolor:
        ; not done yet
        rts

; ------------------------------------------------------------------------
; GETPALETTE: Return the current palette in A/X. Even drivers that cannot
; set the palette should return the default palette here, so there's no
; way for this function to fail.
;
; Must set an error code: NO
;

GETPALETTE:
        ; not done yet
        rts

; ------------------------------------------------------------------------
; GETDEFPALETTE: Return the default palette for the driver in A/X. All
; drivers should return something reasonable here, even drivers that don't
; support palettes; otherwise, the caller has no way to determine the colors
; of the (not changeable) palette.
;
; Must set an error code: NO (all drivers must have a default palette)
;

GETDEFPALETTE:
        lda     #<DEFPALETTE
        ldx     #>DEFPALETTE
        rts

; ------------------------------------------------------------------------
; SETPIXEL: Draw one pixel at X1/Y1 = ptr1/ptr2 with the current drawing
; color. The co-ordinates passed to this function are never outside the
; visible screen area, so there is no need for clipping inside this function.
;
; Must set an error code: NO
;

SETPIXEL:
        lda #$80
        
SETPIXELSETMODE:
        sta HRSFB
        lda X1
        sta HRS1
        lda Y1
        sta HRS2
        

        
        BRK_TELEMON(XCURSE)
        
        rts

; ------------------------------------------------------------------------
; GETPIXEL: Read the color value of a pixel, and return it in A/X. The
; co-ordinates passed to this function are never outside the visible screen
; area, so there is no need for clipping inside this function.

GETPIXEL:
        ; not done yet
        rts

; ------------------------------------------------------------------------
; LINE: Draw a line from X1/Y1 to X2/Y2, where X1/Y1 = ptr1/ptr2 and
; X2/Y2 = ptr3/ptr4, using the current drawing color.
;
; Must set an error code: NO
;

LINE:
        ; not done yet
        lda   X1
        sta   HRS1
        lda   Y1
        sta   HRS2
        
        lda   X2
        sta   HRS3
        lda   Y2
        sta   HRS4

        lda   X1+1
        sta   HRS1+1

        lda   Y1+1 
        sta   HRS2+1

        lda   X2+1
        sta   HRS3+1
        
        lda   Y2+1        
        sta   HRS4+1           

        lda   #$FF
        sta   HRSPAT

        BRK_TELEMON(XDRAWA)
        rts

     
        
CIRCLE:
        ; not done yet
        rts
        
; ------------------------------------------------------------------------
; BAR: Draw a filled rectangle with the corners X1/Y1, X2/Y2, where
; X1/Y1 = ptr1/ptr2 and X2/Y2 = ptr3/ptr4, using the current drawing color.
; Contrary to most other functions, the graphics kernel will sort and clip
; the co-ordinates before calling the driver; so, on entry, the following
; conditions are valid:
;       X1 <= X2
;       Y1 <= Y2
;       (X1 >= 0) && (X1 < XRES)
;       (X2 >= 0) && (X2 < XRES)
;       (Y1 >= 0) && (Y1 < YRES)
;       (Y2 >= 0) && (Y2 < YRES)
;
; Must set an error code: NO
;

BAR:
        ; not done yet
        rts

; ------------------------------------------------------------------------
; TEXTSTYLE: Set the style used when calling OUTTEXT. Text scaling in the x
; and y directions is passed in X/Y, the text direction is passed in A.
;
; Must set an error code: NO
;

TEXTSTYLE:
        rts


; ------------------------------------------------------------------------
; OUTTEXT: Output text at x/y = ptr1/ptr2, using the current color and the
; current text style. The text to output is given as a zero-terminated
; string with its address in ptr3.
;
; Must set an error code: NO
;

OUTTEXT:
        ; put hires cursor in X & Y
        lda   #$00
        jsr   SETPIXELSETMODE
        
        
        ; count the length of the string
        ldy   #$00
loop:        
        lda   (ptr3),y
        beq   out
        iny
        bne   loop
out:
        ; XSCHAR routine from telemon needs to have the length of the string in X register
        ; copy Y register to X register. It could be optimized in 65C02 with TYX
        tya 
        tax
    
        lda   ptr3     ; XSCHAR needs in A and Y the adress of the string        
        ldy   ptr3+1    
        BRK_TELEMON(XSCHAR)
        rts