cc65/cfg/module.cfg

MEMORY {
    ZP:                  start = $0000, size = $0100;
    COMBINED: file = %O, start = $0000, size = $FFFF;
}
SEGMENTS {
    ZEROPAGE: load = ZP,       type = zp;
    EXTZP:    load = ZP,       type = zp, optional = yes;
    HEADER:   load = COMBINED, type = ro;
    ONCE:     load = COMBINED, type = ro, optional = yes;
    CODE:     load = COMBINED, type = ro;
    RODATA:   load = COMBINED, type = ro;
    DATA:     load = COMBINED, type = rw;
    BSS:      load = COMBINED, type = bss;
}
FILES {
    %O: format = o65;
}
FORMATS {
    o65: os   = cc65,
         type = small;
}
Added configuration for cc65 modules git-svn-id: svn://svn.cc65.org/cc65/trunk@1261 b7a2c559-68d2-44c3-8de9-860c34a00d81 2002-04-25 05:07:12 +00:00			`MEMORY {`
Renamed JUMPTABLE and cleaned up module.cfg. This change was suppsed to fix the issue that the former JUMPTABLE is merked as 'ro' while it is actually written to in several scenarios. When drivers are converted using co65 and then compiled into ROMs the JUMPTABLE isn't copied to RAM and therefore the write operations in question fail. However unfortunately I didn't succeed in changing that :-( Just setting the former JUMPTABLE to 'rw' broke the drivers. So I placed the DATA segment directly after the former JUMPTABLE segment. This made the drivers converted with co65 work again - obviously after changing libsrc/Makefile:235 from '--code-label' to '--data-label'. But the actual dynamic drivers still didn't work as the former JUMPTABLE wasn't placed as the beginning of the loaded file anymore. That effect could be changed by exchanging src/ld65/o65.c:1391 with src/ld65/o65.c:1394 but doing so broke the drivers again :-(( 2014-05-01 19:43:34 +00:00			`ZP: start = $0000, size = $0100;`
Add an additional file = "" to memory areas that contain only bss or zp type segments and aren't written to the output file. Before that, the "not going to output file" was implicit because of the bss type of the segments contained. The new attribute makes this explicit. git-svn-id: svn://svn.cc65.org/cc65/trunk@4853 b7a2c559-68d2-44c3-8de9-860c34a00d81 2010-11-12 19:59:02 +00:00			`COMBINED: file = %O, start = $0000, size = $FFFF;`
Added configuration for cc65 modules git-svn-id: svn://svn.cc65.org/cc65/trunk@1261 b7a2c559-68d2-44c3-8de9-860c34a00d81 2002-04-25 05:07:12 +00:00			`}`
			`SEGMENTS {`
Renamed JUMPTABLE and cleaned up module.cfg. This change was suppsed to fix the issue that the former JUMPTABLE is merked as 'ro' while it is actually written to in several scenarios. When drivers are converted using co65 and then compiled into ROMs the JUMPTABLE isn't copied to RAM and therefore the write operations in question fail. However unfortunately I didn't succeed in changing that :-( Just setting the former JUMPTABLE to 'rw' broke the drivers. So I placed the DATA segment directly after the former JUMPTABLE segment. This made the drivers converted with co65 work again - obviously after changing libsrc/Makefile:235 from '--code-label' to '--data-label'. But the actual dynamic drivers still didn't work as the former JUMPTABLE wasn't placed as the beginning of the loaded file anymore. That effect could be changed by exchanging src/ld65/o65.c:1391 with src/ld65/o65.c:1394 but doing so broke the drivers again :-(( 2014-05-01 19:43:34 +00:00			`ZEROPAGE: load = ZP, type = zp;`
			`EXTZP: load = ZP, type = zp, optional = yes;`
			`HEADER: load = COMBINED, type = ro;`
Renamed INITBSS to INIT and INIT to ONCE. The way we want to use the INITBSS segment - and especially the fact that it won't have the type bss on all ROM based targets - means that the name INITBSS is misleading. After all INIT is the best name from my perspective as it serves several purposes and therefore needs a rather generic name. Unfortunately this means that the current INIT segment needs to be renamed too. Looking for a short (ideally 4 letter) name I came up with ONCE as it contains all code (and data) accessed only once during initialization. 2016-03-06 20:26:22 +00:00			`ONCE: load = COMBINED, type = ro, optional = yes;`
Renamed JUMPTABLE and cleaned up module.cfg. This change was suppsed to fix the issue that the former JUMPTABLE is merked as 'ro' while it is actually written to in several scenarios. When drivers are converted using co65 and then compiled into ROMs the JUMPTABLE isn't copied to RAM and therefore the write operations in question fail. However unfortunately I didn't succeed in changing that :-( Just setting the former JUMPTABLE to 'rw' broke the drivers. So I placed the DATA segment directly after the former JUMPTABLE segment. This made the drivers converted with co65 work again - obviously after changing libsrc/Makefile:235 from '--code-label' to '--data-label'. But the actual dynamic drivers still didn't work as the former JUMPTABLE wasn't placed as the beginning of the loaded file anymore. That effect could be changed by exchanging src/ld65/o65.c:1391 with src/ld65/o65.c:1394 but doing so broke the drivers again :-(( 2014-05-01 19:43:34 +00:00			`CODE: load = COMBINED, type = ro;`
			`RODATA: load = COMBINED, type = ro;`
			`DATA: load = COMBINED, type = rw;`
			`BSS: load = COMBINED, type = bss;`
Added configuration for cc65 modules git-svn-id: svn://svn.cc65.org/cc65/trunk@1261 b7a2c559-68d2-44c3-8de9-860c34a00d81 2002-04-25 05:07:12 +00:00			`}`
			`FILES {`
			`%O: format = o65;`
			`}`
			`FORMATS {`
- No more HEAP segment - RAM reduced by __STACKSIZE__ - Unified formatting git-svn-id: svn://svn.cc65.org/cc65/trunk@4633 b7a2c559-68d2-44c3-8de9-860c34a00d81 2010-03-21 17:10:17 +00:00			`o65: os = cc65,`
			`type = small;`
Added configuration for cc65 modules git-svn-id: svn://svn.cc65.org/cc65/trunk@1261 b7a2c559-68d2-44c3-8de9-860c34a00d81 2002-04-25 05:07:12 +00:00			`}`