Although the primary target OS for the Apple II for sure isn't DOS 3.3 but ProDOS 8 the Apple II binary files contained a DOS 3.3 4-byte header. Recently I was made aware of the AppleSingle file format. That format is a much better way to transport Apple II meta data from the cc65 toolchain to the ProDOS 8 file system. Therefore I asked AppleCommander to support the AppleSingle file format. Now that there's an AppleCommander BETA with AppleSingle support it's the right time for this change.
I bumped version to 2.17 because of this from the perspective of Apple II users of course incompatible change.
All but one TGI drivers didn't use IRQs. Especially when the TGI driver kernel was the only .interruptor this meant quite some unnecessary overhead because it pulled in the whole IRQ infrastructure.
The one driver using IRQs (the graphics driver for the 160x102x16 mode on the Lynx) now uses a library reference to set up a JMP to its IRQ handler.
All but one joystick drivers didn't use IRQs. Espsecially when the joystick driver kernel was the only .interruptor this meant quite some unnecessary overhead because it pulled in the whole IRQ infrastructure.
I was told that the one driver using IRQs (the DXS/HIT-4 Player joystick driver for the C64) can be reworked to not do it. Until this is done that driver is defunct.
The Apple II linker configs don't define symbols for the STARTP segment anymore. There refer to the load/start address in the same way the executable file header does.
So far the joy_masks array allowed several joystick drivers for a single target to each have different joy_read return values. However this meant that every call to joy_read implied an additional joy_masks lookup to post-process the return value.
Given that almost all targets only come with a single joystick driver this seems an inappropriate overhead. Therefore now the target header files contain constants matching the return value of the joy_read of the joystick driver(s) on that target.
If there indeed are several joystick drivers for a single target they must agree on a common return value for joy_read. In some cases this was alredy the case as there's a "natural" return value for joy_read. However a few joystick drivers need to be adjusted. This may cause some overhead inside the driver. But that is for sure smaller than the overhead introduced by the joy_masks lookup before.
!!! ToDo !!!
The following three joystick drivers become broken with this commit and need to be adjusted:
- atrmj8.s
- c64-numpad.s
- vic20-stdjoy.s
For quite some time I deliberately didn't add cursor support to the Apple II CONIO imöplementation. I consider it inappropriate to increase the size of cgetc() unduly for a rather seldom used feature.
There's no hardware cursor on the Apple II so displaying a cursor during keyboard input means reading the character stored at the cursor location, writing the cursor character, reading the keyboard and finally writing back the character read initially.
The naive approach is to reuse the part of cputc() that determines the memory location of the character at the cursor position in order to read the character stored there. However that means to add at least one additional JSR / RTS pair to cputc() adding 4 bytes and 12 cycles :-( Apart from that this approach means still a "too" large cgetc().
The approach implemented instead is to include all functionality required by cgetc() into cputc() - which is to read the current character before writing a new one. This may seem surprising at first glance but an LDA(),Y / TAX sequence adds only 3 bytes and 7 cycles so it cheaper than the JSR / RTS pair and allows to brings down the code increase in cgetc() down to a reasonable value.
However so far the internal cputc() code in question saved the X register. Now it uses the X register to return the old character present before writing the new character for cgetc(). This requires some rather small adjustments in other functions using that internal cputc() code.
- Adds new ENOEXEC error code, also used by Apple2 targets.
- Maximum command line length is 40, incl. program name. This is
an XDOS restriction.
- testcode/lib/tinyshell.c has been extended to be able to run
programs.
About all CONIO functions offering a <...>xy variant call
popa
_gotoxy
By providing an internal gotoxy variant that starts with a popa all those CONIO function can be shortened by 3 bytes. As soon as program calls more than one CONIO function this means an overall code size reduction.
_sys() is supposed to be (primarily) intended to call ROM routines. Leveraging the "file overlay" mechanism of the cc65 build system allows to provide a Apple II specific _sys() implementation that temporarily switches in the ROM.
Make the same changes to the Apple II that were done with 0ee9b2e446 to the C64.
Notes:
- The startup code deliberately doesn't make use of symbols defined for the LC segment as that segment is optional.
- The <...>-asm.cfg configs move the segment BSS to an own memory area BSS although this doesn't seem necessary. However the benefit is that the size of the memeory area MAIN is identical to the number of bytes loaded from disk into RAM. To keep this an invariant for all Apple II configs allows to simplify the EXEHDR to just refer to the symbols defined for MAIN.
The constructors are _NOT_ allowed anymore to access the BSS. Rather they must use the DATA segment or the INIT segment. The latter isn't cleared at any point so the constructors may use it to expose values to the main program. However they must make sure to always write the values as they are not pre-initialized.
The way we want to use the INITBSS segment - and especially the fact that it won't have the type bss on all ROM based targets - means that the name INITBSS is misleading. After all INIT is the best name from my perspective as it serves several purposes and therefore needs a rather generic name.
Unfortunately this means that the current INIT segment needs to be renamed too. Looking for a short (ideally 4 letter) name I came up with ONCE as it contains all code (and data) accessed only once during initialization.
Moving __cwd from BSS into INITBSS does of course ;-) not only impact the CBM targets but all targets with disk I/O support.
Note: Code using `__cwd-1` may trigger an ld65 range error because __cwd may end up at the very begining of a segment. As far as I see this is an ld65 bug which I'm not try to fix - at least here.
The starting point is the CALL2051:REM <cmdline> approach. It uses the BASIC input buffer at $200. ProDOS stores the name of the loaded program at $280 (which we want for argv[0]) leaving us with 128 char buffer. If we run the program via exec() we don't need the CALL2051 but only the REM token (which is just one char). So have a maximum cmdline length of 126 (plus a terminating zero).
There's no specification for ProDOS BIN file cmdline parameters so exec() just supports the CALL2051:REM <cmdline> approach. In contrast ProDOS SYS files allow for a 'startup filename'. A ProDOS filename is short than 126 chars so having exec() general cut the cmdline after 126 chars seems reasonable. If the SYS file we exec() allows for less we cut the cmdline further.
Our 'loader.system' SYS file however allows for an unusually 126 char long "startup filename" as it is targeted towards cc65 BIN porgrams with their 126 cmdline length.
Up to now static drivers were created via co65 from dynamic drivers. However there was an issue with that approach:
The dynamic drivers are "o65 simple files" which obligates that they start with the 'code' segment. However dynamic drivers need to start with the module header - which is written to. For dynamic drivers this isn't more than a conceptual issue because they are always contain a 'data' segment and may therefore only be loaded into writable memory.
However when dynamic drivers are converted to static drivers using co65 then that issue becomes a real problem as then the 'code' segment may end up in non-writable memory - and thus writing to the module header fails.
Instead of changing the way dynamic drivers work I opted to rather make static driver creation totally independent from dynamic drivers. This allows to place the module header in the 'data' segment (see 'module.mac').
This change was suppsed to fix the issue that the former JUMPTABLE is merked as 'ro' while it is actually written to in several scenarios. When drivers are converted using co65 and then compiled into ROMs the JUMPTABLE isn't copied to RAM and therefore the write operations in question fail.
However unfortunately I didn't succeed in changing that :-( Just setting the former JUMPTABLE to 'rw' broke the drivers. So I placed the DATA segment directly after the former JUMPTABLE segment. This made the drivers converted with co65 work again - obviously after changing libsrc/Makefile:235 from '--code-label' to '--data-label'. But the actual dynamic drivers still didn't work as the former JUMPTABLE wasn't placed as the beginning of the loaded file anymore. That effect could be changed by exchanging src/ld65/o65.c:1391 with src/ld65/o65.c:1394 but doing so broke the drivers again :-((
Building the clean target in src or libsrc should only delete stuff created by the make in those directories. Having both separated allows the Travis CI build to replace the native binaries with cross built binaries while keeping everything else.
The Apple2 doesn't have sprites so the Apple2 mouse callbacks place a special character on the text screen to indicate the mouse position. In order to support the necessary character removing and redrawing the Apple2 mouse driver called the Apple2 mouse callbacks in an "unusual way". So far so (sort of) good.
However the upcoming Atari mouse driver aims to support both "sprite-type" mouse callbacks as well as "text-char-type" mouse callbacks. Therefore the interface between mouse drivers and callbacks needs to be extended to allow the mouse callbacks to hide their different types from the mouse driver.
The nature of this change can be seen best by looking at the Apple2 file modifications. The CBM drivers and callbacks (at least the current ones) don't benefit from this change.
To keep backward compatibility auxtype and the date/time are kept
separated.
A struct similar to the one used in dirent.h is used to access the
create_date and create_time fields.
Originally I used the usual variables (like $(CC) and $(CFLAGS) ) but after
all this doesn't make sense as any predefined values and/or user defined
settings can only be wrong.
Occasionally dynamically drivers suffer from not being to refer to
content in the C library. Therefore I added a mechanism to allow
a C library for a certian target to define a symbol that will be
handed over to dynamic drivers for that target. Then the drivers
can use their refernce to that symbol to access content in the C
library.
- No complex shell logic.
- "Source file shadowing" for all targets via vpath.
- Dependency handling.
- True incremental build.
- Don't write into source directories.
- Easy cleanup by just removing 'wrk'.
- No complex shell logic.
- "Source file shadowing" for all targets via vpath.
- Dependency handling.
- True incremental build.
- Don't write into source directories.
- Easy cleanup by just removing 'wrk'.
- This will allow for different "formulas".
- This brings things together in one place.
git-svn-id: svn://svn.cc65.org/cc65/trunk@5716 b7a2c559-68d2-44c3-8de9-860c34a00d81
flagged by older ca65 versions because of errors in the range checks.
git-svn-id: svn://svn.cc65.org/cc65/trunk@5166 b7a2c559-68d2-44c3-8de9-860c34a00d81
- Copy the pathname to $280 for SYS programs
- Make sure 80 column firmware is off (which btw. switches to the normal character set) which should increase program compatibility
Now "only" cmdline support should be left to do.
git-svn-id: svn://svn.cc65.org/cc65/trunk@4976 b7a2c559-68d2-44c3-8de9-860c34a00d81
are closed on exit, so atexit handlers may close the files themselves or
whatever is necessary for a clean shutdown.
git-svn-id: svn://svn.cc65.org/cc65/trunk@4939 b7a2c559-68d2-44c3-8de9-860c34a00d81
