mirror of
https://github.com/cc65/cc65.git
synced 2024-08-18 10:29:06 +00:00
439 lines
14 KiB
Plaintext
439 lines
14 KiB
Plaintext
<!doctype linuxdoc system>
|
|
|
|
<article>
|
|
|
|
<title>Atari specific information for cc65
|
|
<author>Shawn Jefferson, <htmlurl
|
|
url="mailto:shawnjefferson@24fightingchickens.com"
|
|
name="shawnjefferson@24fightingchickens.com"> and
|
|
Christian Groessler, <htmlurl url="mailto:cpg@aladdin.de" name="cpg@aladdin.de">
|
|
<date>20-Feb-2005
|
|
|
|
<abstract>
|
|
An overview over the Atari runtime system as it is implemented for the cc65 C
|
|
compiler.
|
|
</abstract>
|
|
|
|
<!-- Table of contents -->
|
|
<toc>
|
|
|
|
<!-- Begin the document -->
|
|
|
|
<sect>Overview<p>
|
|
|
|
This file contains an overview of the Atari runtime system as it comes
|
|
with the cc65 C compiler. It describes the memory layout, Atari specific
|
|
header files, available drivers, and any pitfalls specific to that
|
|
platform.
|
|
|
|
Please note that Atari specific functions are just mentioned here, they are
|
|
described in detail in the separate <htmlurl url="funcref.html" name="function
|
|
reference">. Even functions marked as "platform dependent" may be available on
|
|
more than one platform. Please see the function reference for more
|
|
information.
|
|
|
|
|
|
<sect>Binary format<p>
|
|
|
|
The standard binary output format generated by the linker for the
|
|
Atari target is a machine language program with a standard executable
|
|
header (FF FF <2 byte start address> <2 bytes end address>
|
|
[program bytes]). These values are calculated in the crt0.s
|
|
file from the __CODE_LOAD__ and __BSS_LOAD__ values, so keep this in
|
|
mind if you create a custom linker config file and start moving
|
|
segments around (see section <ref name="Reserving a memory area inside the program" id="memhole">). You can
|
|
override this behaviour by creating your own crt0.s file and linking
|
|
it into your program. A run vector is added to the end of the file
|
|
($02E0 <run vector>) and is calculated using
|
|
__CODE_LOAD__ in crt0.s.
|
|
|
|
|
|
<sect>Memory layout<p>
|
|
|
|
The default linker script assumes that the BASIC ROM is disabled (or
|
|
the BASIC cartridge unplugged). This gives a usable memory range from
|
|
$2E00 - $BC1F. The library startup code examines the
|
|
current memory configuration, which depends on the size of the
|
|
installed memory and cartridges present, by inspecting the value in
|
|
the MEMTOP ($2E5) variable. Then the initial stack pointer,
|
|
which indicates the upper bound of memory used, is adjusted. The load
|
|
address of $2E00 was chosen to accommodate having a DOS loaded
|
|
and a driver that resides in low memory such as the 850 R: handler.
|
|
You can override this behaviour by creating a custom linker config
|
|
file.
|
|
|
|
Special locations:
|
|
|
|
<descrip>
|
|
<tag/Text screen/
|
|
The text screen depends on the installed memory size and cartridges
|
|
and can be obtained from the SAVMSC variable ($58).
|
|
|
|
<tag/Stack/
|
|
The C runtime stack is located at MEMTOP and grows downwards,
|
|
regardless of how your linker config file is setup. This
|
|
accomodates the different memory configurations of the Atari
|
|
machines, as well as having a cartridge installed. You can override
|
|
this behaviour by writing your own crt0.s file and linking it to
|
|
your program (see also <ref name="Final note"
|
|
id="memhole_final_note">).
|
|
|
|
<tag/Heap/
|
|
The C heap is located at the end of the program and grows towards the C
|
|
runtime stack.
|
|
|
|
</descrip><p>
|
|
|
|
|
|
|
|
<sect>Platform specific header files<p>
|
|
|
|
Programs containing Atari specific code may use the <tt/atari.h/
|
|
header file.
|
|
|
|
|
|
<sect1>Atari specific functions<p>
|
|
|
|
The functions listed below are special for the Atari. See the <htmlurl
|
|
url="funcref.html" name="function reference"> for declaration and usage.
|
|
|
|
<itemize>
|
|
<item>get_ostype
|
|
<item>get_tv
|
|
<item>_gtia_mkcolor
|
|
<item>_getcolor
|
|
<item>_getdefdev
|
|
<item>_graphics
|
|
<item>_rest_vecs
|
|
<item>_save_vecs
|
|
<item>_scroll
|
|
<item>_setcolor
|
|
<item>_setcolor_low
|
|
</itemize>
|
|
|
|
|
|
<sect1>Hardware access<p>
|
|
|
|
The following pseudo variables declared in the <tt/atari.h/ header
|
|
file do allow access to hardware located in the address space. Some
|
|
variables are structures, accessing the struct fields will access the
|
|
chip registers.
|
|
|
|
<descrip>
|
|
|
|
<tag><tt/GTIA_READ/ and <tt/GTIA_WRITE/</tag>
|
|
The <tt/GTIA_READ/ structure allows read access to the GTIA. The
|
|
<tt/GTIA_WRITE/ structure allows write access to the GTIA.
|
|
See the <tt/_gtia.h/ header file located in the include directory
|
|
for the declaration of the structure.
|
|
|
|
<tag><tt/POKEY_READ/ and <tt/POKEY_WRITE/</tag>
|
|
The <tt/POKEY_READ/ structure allows read access to the POKEY. The
|
|
<tt/POKEY_WRITE/ structure allows write access to the POKEY.
|
|
See the <tt/_pokey.h/ header file located in the include directory
|
|
for the declaration of the structure.
|
|
|
|
<tag><tt/ANTIC/</tag>
|
|
The <tt/ANTIC/ structure allows read access to the ANTIC.
|
|
See the <tt/_antic.h/ header file located in the include directory
|
|
for the declaration of the structure.
|
|
|
|
<tag><tt/PIA/</tag>
|
|
The <tt/PIA/ structure allows read access to the PIA 6520.
|
|
See the <tt/_pia.h/ header file located in the include directory
|
|
for the declaration of the structure.
|
|
|
|
</descrip><p>
|
|
|
|
|
|
|
|
<sect>Loadable drivers<p>
|
|
|
|
<sect1>Graphics drivers<p>
|
|
|
|
Currently there are no graphics drivers available for the Atari platform.
|
|
|
|
<sect1>Extended memory drivers<p>
|
|
|
|
Currently there are no extended memory drivers available for the Atari
|
|
platform.
|
|
|
|
<sect1>Joystick drivers<p>
|
|
|
|
<descrip>
|
|
|
|
<tag><tt/atari-stdjoy.joy/</tag>
|
|
Supports up to four standard joysticks connected to the joystick ports of
|
|
the Atari.
|
|
|
|
</descrip><p>
|
|
|
|
|
|
|
|
<sect1>Mouse drivers<p>
|
|
|
|
Currently no drivers available (in fact, the API for loadable mouse drivers
|
|
does not exist). There is a static driver you can use.
|
|
|
|
|
|
<sect1>RS232 device drivers<p>
|
|
|
|
Currently there are no RS232 loadable drivers available for the Atari
|
|
platform. There is a static driver you can use.
|
|
|
|
|
|
<sect>Limitations<p>
|
|
|
|
|
|
<sect>DIO implementation<label id="dio"><p>
|
|
|
|
The Atari supports disk drives with either 128 or 256 byte sectors.
|
|
The first three sectors of any disk are always 128 bytes long though. This is
|
|
because the system can only boot from 128 bytes sectors.
|
|
|
|
Therefore the DIO read and write functions transfer only 128 bytes
|
|
for sectors 1 to 3, regardless of the type of diskette.
|
|
|
|
|
|
<sect>Other hints<p>
|
|
|
|
<sect1>Function keys<p>
|
|
|
|
These are defined to be Atari + number key.
|
|
|
|
<sect1>Reserving a memory area inside a program<label id="memhole"><p>
|
|
|
|
The Atari 130XE maps its additional memory into CPU memory in 16K
|
|
chunks at address $4000 to $7FFF. One might want to
|
|
prevent this memory area from being used by cc65. Other reasons to
|
|
prevent the use of some memory area could be the buffers for display
|
|
lists and screen memory.
|
|
<p>
|
|
The Atari executable format allows holes inside a program, e.g. one
|
|
part loads into $2E00 to $3FFF, going below the reserved
|
|
memory area (assuming a reserved area from $4000 to
|
|
$7FFF), and another part loads into $8000 to
|
|
$BC1F.
|
|
<p>
|
|
Each load chunk of the executable starts with a 4 byte header which
|
|
defines its load address and size.
|
|
<p>
|
|
<sect2>Low code and high data example<p>
|
|
Goal: Create an executable with 2 load chunks which doesn't use the
|
|
memory area from $4000 to $7FFF. The CODE segment of
|
|
the program should go below $4000 and the DATA and RODATA
|
|
segments should go above $7FFF.
|
|
<p>
|
|
The main problem is that the EXE header generated by the cc65 runtine
|
|
lib is wrong. It defines a single load chunk with the sizes/addresses
|
|
of the CODE, RODATA, and DATA segments (the whole user program).
|
|
<p>
|
|
The contents of the EXE header come from the EXEHDR segment, which is
|
|
defined in crt0.s. This cannot be changed w/o modifiying and
|
|
recompiling the cc65 atari runtime lib. Therefore the original EXE
|
|
header must be discarded. It will be replaced by a user created
|
|
one.
|
|
<p>
|
|
The user needs to create a customized linker config file which adds
|
|
new memory areas and segments to hold the new EXE header and the
|
|
header data for the second load chunk. Also an assembly source file
|
|
needs to be created which defines the contents of the new EXE header
|
|
and the second load chunk header.
|
|
<p>
|
|
<p>
|
|
This is a modified cc65 Atari linker configuration file (split.cfg):
|
|
<tscreen><verb>
|
|
MEMORY {
|
|
ZP: start = $82, size = $7E, type = rw, define = yes;
|
|
|
|
HEADER: start = $0000, size = $6, file = %O; # first load chunk
|
|
RAMLO: start = $2E00, size = $1200, file = %O;
|
|
|
|
BANK: start = $4000, size = $4000, file = "";
|
|
|
|
SECHDR: start = $0000, size = $4, file = %O; # second load chunk
|
|
RAM: start = $8000, size = $3C20, file = %O; # $3C20: matches upper bound $BC1F
|
|
}
|
|
SEGMENTS {
|
|
EXEHDR: load = BANK, type = wprot;
|
|
|
|
NEXEHDR: load = HEADER, type = wprot; # first load chunk
|
|
CODE: load = RAMLO, type = wprot, define = yes;
|
|
|
|
CHKHDR: load = SECHDR, type = wprot; # second load chunk
|
|
RODATA: load = RAM, type = wprot, define = yes;
|
|
DATA: load = RAM, type = rw, define = yes;
|
|
BSS: load = RAM, type = bss, define = yes;
|
|
|
|
ZEROPAGE: load = ZP, type = zp;
|
|
AUTOSTRT: load = RAM, type = wprot; # defines program entry point
|
|
}
|
|
FEATURES {
|
|
CONDES: segment = RODATA,
|
|
type = constructor,
|
|
label = __CONSTRUCTOR_TABLE__,
|
|
count = __CONSTRUCTOR_COUNT__;
|
|
CONDES: segment = RODATA,
|
|
type = destructor,
|
|
label = __DESTRUCTOR_TABLE__,
|
|
count = __DESTRUCTOR_COUNT__;
|
|
}
|
|
SYMBOLS {
|
|
__STACKSIZE__ = $800; # 2K stack
|
|
}
|
|
</verb></tscreen>
|
|
<p>
|
|
|
|
A new memory area BANK was added which describes the reserved area.
|
|
It gets loaded with the contents of the old EXEHDR segment. But the
|
|
memory area isn't written to the output file. This way the contents of
|
|
the EXEHDR segment get discarded.
|
|
<p>
|
|
The added NEXEHDR segment defines the correct EXE header. It puts only
|
|
the CODE segment into load chunk #1 (RAMLO memory area).
|
|
<p>
|
|
The header for the second load chunk comes from the new CHKHDR
|
|
segment. It puts the RODATA and DATA segments into load chunk #2 (RAM
|
|
memory area).
|
|
<p>
|
|
<p>
|
|
The contents of the new NEXEHDR and CHKHDR segments come from this
|
|
file (split.s):
|
|
<tscreen><verb>
|
|
.import __CODE_LOAD__, __BSS_LOAD__, __CODE_SIZE__
|
|
.import __DATA_LOAD__, __RODATA_LOAD__
|
|
|
|
.segment "NEXEHDR"
|
|
.word $FFFF ; EXE file magic number
|
|
; 1st load chunk
|
|
.word __CODE_LOAD__
|
|
.word __CODE_LOAD__ + __CODE_SIZE__ - 1
|
|
|
|
.segment "CHKHDR"
|
|
; 2nd load chunk (contains with AUTOSTRT in fact a 3rd load chunk)
|
|
.word __RODATA_LOAD__
|
|
.word __BSS_LOAD__ - 1
|
|
</verb></tscreen>
|
|
<p>
|
|
Compile with
|
|
<tscreen><verb>
|
|
cl65 -t atari -C split.cfg -o prog.com prog.c split.s
|
|
</verb></tscreen>
|
|
|
|
<sect2>Low data and high code example<p>
|
|
|
|
|
|
Goal: Put RODATA and DATA into low memory and CODE with BSS into high
|
|
memory (split2.cfg):
|
|
|
|
<tscreen><verb>
|
|
MEMORY {
|
|
ZP: start = $82, size = $7E, type = rw, define = yes;
|
|
|
|
HEADER: start = $0000, size = $6, file = %O; # first load chunk
|
|
RAMLO: start = $2E00, size = $1200, file = %O;
|
|
|
|
BANK: start = $4000, size = $4000, file = "";
|
|
|
|
SECHDR: start = $0000, size = $4, file = %O; # second load chunk
|
|
RAM: start = $8000, size = $3C20, file = %O; # $3C20: matches upper bound $BC1F
|
|
}
|
|
SEGMENTS {
|
|
EXEHDR: load = BANK, type = wprot; # discarded old EXE header
|
|
|
|
NEXEHDR: load = HEADER, type = wprot; # first load chunk
|
|
RODATA: load = RAMLO, type = wprot, define = yes;
|
|
DATA: load = RAMLO, type = rw, define = yes;
|
|
|
|
CHKHDR: load = SECHDR, type = wprot; # second load chunk
|
|
CODE: load = RAM, type = wprot, define = yes;
|
|
BSS: load = RAM, type = bss, define = yes;
|
|
|
|
ZEROPAGE: load = ZP, type = zp;
|
|
AUTOSTRT: load = RAM, type = wprot; # defines program entry point
|
|
}
|
|
FEATURES {
|
|
CONDES: segment = RODATA,
|
|
type = constructor,
|
|
label = __CONSTRUCTOR_TABLE__,
|
|
count = __CONSTRUCTOR_COUNT__;
|
|
CONDES: segment = RODATA,
|
|
type = destructor,
|
|
label = __DESTRUCTOR_TABLE__,
|
|
count = __DESTRUCTOR_COUNT__;
|
|
}
|
|
SYMBOLS {
|
|
__STACKSIZE__ = $800; # 2K stack
|
|
}
|
|
</verb></tscreen>
|
|
|
|
New contents for NEXEHDR and CHKHDR are needed (split2.s):
|
|
<tscreen><verb>
|
|
.import __CODE_LOAD__, __BSS_LOAD__, __DATA_SIZE__
|
|
.import __DATA_LOAD__, __RODATA_LOAD__
|
|
|
|
.segment "NEXEHDR"
|
|
.word $FFFF
|
|
.word __RODATA_LOAD__
|
|
.word __DATA_LOAD__ + __DATA_SIZE__ - 1
|
|
|
|
.segment "CHKHDR"
|
|
.word __CODE_LOAD__
|
|
.word __BSS_LOAD__ - 1
|
|
</verb></tscreen>
|
|
|
|
Compile with
|
|
<tscreen><verb>
|
|
cl65 -t atari -C split2.cfg -o prog.com prog.c split2.s
|
|
</verb></tscreen>
|
|
|
|
<sect2>Final note<label id="memhole_final_note"><p>
|
|
|
|
There are two other memory areas which don't appear directly in the
|
|
linker script. They are the stack and the heap.
|
|
|
|
The cc65 runtime lib places the stack location at the end of available
|
|
memory. This is dynamically set from the MEMTOP system variable at
|
|
startup. The heap is located in the area between the end of the BSS
|
|
segment and the top of the stack as defined by __STACKSIZE__.
|
|
|
|
If BSS and/or the stack shouldn't stay at the end of the program,
|
|
some parts of the cc65 runtime lib need to be replaced/modified.
|
|
|
|
common/_heap.s defines the location of the heap and atari/crt0.s
|
|
defines the location of the stack by initializing sp.
|
|
|
|
|
|
<sect>Bugs/Feedback<p>
|
|
|
|
If you have problems using the library, if you find any bugs, or if you're
|
|
doing something interesting with it, I would be glad to hear from you. Feel
|
|
free to contact me by email (<htmlurl url="mailto:uz@cc65.org"
|
|
name="uz@cc65.org"> or <htmlurl url="mailto:cpg@aladdin.de"
|
|
name="cpg@aladdin.de">).
|
|
|
|
|
|
|
|
<sect>License<p>
|
|
|
|
This software is provided 'as-is', without any expressed or implied
|
|
warranty. In no event will the authors be held liable for any damages
|
|
arising from the use of this software.
|
|
|
|
Permission is granted to anyone to use this software for any purpose,
|
|
including commercial applications, and to alter it and redistribute it
|
|
freely, subject to the following restrictions:
|
|
|
|
<enum>
|
|
<item> The origin of this software must not be misrepresented; you must not
|
|
claim that you wrote the original software. If you use this software
|
|
in a product, an acknowledgment in the product documentation would be
|
|
appreciated but is not required.
|
|
<item> Altered source versions must be plainly marked as such, and must not
|
|
be misrepresented as being the original software.
|
|
<item> This notice may not be removed or altered from any source
|
|
distribution.
|
|
</enum>
|
|
|
|
</article>
|