cc65/libsrc/apple2/apple2-280-192-8.s

;
; Graphics driver for the 280x192x8 mode on the Apple II
;
; Stefan Haubenthal <polluks@sdf.lonestar.org>
; Oliver Schmidt <ol.sc@web.de>
;

	.include	"zeropage.inc"

	.include	"tgi-kernel.inc"
	.include	"tgi-mode.inc"
	.include	"tgi-error.inc"
	.include	"apple2.inc"

; ------------------------------------------------------------------------

; Zero page stuff

HBASL	:=	$26
HMASK	:=	$30
PAGE	:=	$E6
SCALE	:=	$E7
ROT	:=	$F9

; Graphics entry points, by cbmnut (applenut??) cbmnut@hushmail.com

TEXT    :=	$F399	; Return to text screen
HGR2    :=	$F3D8	; Initialize and clear hi-res page 2.
HGR     :=	$F3E2	; Initialize and clear hi-res page 1.
HCLR    :=	$F3F2	; Clear the current hi-res screen to black.
BKGND   :=	$F3F6	; Clear the current hi-res screen to the
                        ; last plotted color (from ($1C).
HPOSN   :=	$F411	; Positions the hi-res cursor without
                        ; plotting a point.
                        ; Enter with (A) = Y-coordinate, and
                        ; (Y,X) = X-coordinate.
HPLOT   :=	$F457	; Calls HPOSN and tries to plot a dot at
                        ; the cursor's position.  If you are
                        ; trying to plot a non-white color at
                        ; a complementary color position, no
                        ; dot will be plotted.
HLIN    :=	$F53A	; Draws a line from the last plotted
                        ; point or line destination to:
                        ; (X,A) = X-coordinate, and
                        ; (Y) = Y-coordinate.
HFIND   :=	$F5CB	; Converts the hi-res coursor's position
                        ; back to X- and Y-coordinates; stores
                        ; X-coordinate at $E0,E1 and Y-coordinate
                        ; at $E2.
DRAW    :=	$F601	; Draws a shape.  Enter with (Y,X) = the
                        ; address of the shape table, and (A) =
                        ; the rotation factor.  Uses the current
                        ; color.
XDRAW   :=	$F65D	; Draws a shape by inverting the existing
                        ; color of the dots the shape draws over.
                        ; Same entry parameters as DRAW.
SETHCOL :=	$F6EC	; Set the hi-res color to (X), where (X)
                        ; must be between 0 and 7.

; ------------------------------------------------------------------------

; Variables mapped to the zero page segment variables. Some of these are
; used for passing parameters to the driver.

X1	:=	ptr1
Y1	:=	ptr2
X2	:=	ptr3
Y2	:=	ptr4

; ------------------------------------------------------------------------

	.segment	"JUMPTABLE"

; Header. Includes jump table and constants.

; First part of the header is a structure that has a magic and defines the
; capabilities of the driver

	.byte	$74, $67, $69	; "tgi"
	.byte	TGI_API_VERSION	; TGI API version number
	.word	280		; X resolution
	.word	192		; Y resolution
	.byte	8		; Number of drawing colors
pages:	.byte	2		; Number of screens available
	.byte	7		; System font X size
	.byte	8		; System font Y size
	.word   $100		; Aspect ratio

; Next comes the jump table. With the exception of IRQ, all entries must be
; valid and may point to an RTS for test versions (function not implemented).

       	.addr   INSTALL
       	.addr   UNINSTALL
       	.addr   INIT
       	.addr   DONE
       	.addr   GETERROR
       	.addr   CONTROL
       	.addr   CLEAR
       	.addr   SETVIEWPAGE
       	.addr   SETDRAWPAGE
       	.addr   SETCOLOR
       	.addr   SETPALETTE
       	.addr   GETPALETTE
       	.addr   GETDEFPALETTE
       	.addr   SETPIXEL
       	.addr   GETPIXEL
       	.addr   LINE
       	.addr   BAR
       	.addr   TEXTSTYLE
       	.addr   OUTTEXT
        .addr   0               ; IRQ entry is unused

; ------------------------------------------------------------------------

	.bss

; Absolute variables used in the code

ERROR:	.res	1		; Error code

; ------------------------------------------------------------------------

	.rodata

; Constants and tables

DEFPALETTE: .byte $00, $01, $02, $03, $04, $05, $06, $07

FONT:
	; Beagle Bros Shape Mechanic font F.ASCII.SMALL
	; modified to exactly reproduce the text glyphs
	.incbin	"../apple2/apple2-280-192-8.fnt"

; ------------------------------------------------------------------------

	.code

; INSTALL routine. Is called after the driver is loaded into memory. May
; initialize anything that has to be done just once. Is probably empty
; most of the time.
; Must set an error code: NO
INSTALL:
	.ifdef  __APPLE2ENH__
	; No page switching if 80 column store is enabled
	lda	#$02
	bit	RD80COL
	bpl	:+
	lda	#$01
:	sta	pages
	.endif

	; Fall through

; UNINSTALL routine. Is called before the driver is removed from memory. May
; clean up anything done by INSTALL but is probably empty most of the time.
; Must set an error code: NO
UNINSTALL:
	rts

; INIT: Changes an already installed device from text mode to graphics mode.
; Note that INIT/DONE may be called multiple times while the driver
; is loaded, while INSTALL is only called once, so any code that is needed
; to initializes variables and so on must go here. Setting palette and
; clearing the screen is not needed because this is called by the graphics
; kernel later.
; The graphics kernel will never call INIT when a graphics mode is already
; active, so there is no need to protect against that.
; Must set an error code: YES
INIT:
	; Switch into graphics mode
	bit	MIXCLR
	bit	LOWSCR
	bit	HIRES
	bit	TXTCLR

	; Beagle Bros Shape Mechanic fonts don't
	; scale well so use fixed scaling factor
	lda	#1
	sta	SCALE

	; Done, reset the error code
	lda	#TGI_ERR_OK
	sta	ERROR
	rts

; DONE: Will be called to switch the graphics device back into text mode.
; The graphics kernel will never call DONE when no graphics mode is active,
; so there is no need to protect against that.
; Must set an error code: NO
DONE:
	; Switch into text mode
	bit	TXTSET
	bit	LOWSCR

	.ifdef  __APPLE2ENH__
	; Limit SET80COL-HISCR to text
	bit	LORES
	.endif

	; Reset the text window top
	lda	#$00
	sta	WNDTOP
	rts

; GETERROR: Return the error code in A and clear it.
GETERROR:
	lda	ERROR
	ldx	#TGI_ERR_OK
	stx	ERROR
	rts

; CONTROL: Platform/driver specific entry point.
; Must set an error code: YES
CONTROL:
	; Check data msb and code to be 0
	ora	ptr1+1
	bne	err

	; Check data lsb to be [0..1]
	lda	ptr1
	cmp	#1+1
	bcs	err

	; Set text window top
	tax
	beq	:+
	lda	#20
:	sta	WNDTOP

	; Switch 4 lines of text
	.assert MIXCLR + 1 = MIXSET, error
	lda	MIXCLR,x	; No BIT absolute,X available

	; Done, reset the error code
	lda	#TGI_ERR_OK
	beq	:+		; Branch always

	; Done, set the error code
err:	lda	#TGI_ERR_INV_ARG
:	sta	ERROR
	rts

; CLEAR: Clears the screen.
; Must set an error code: NO
CLEAR:
	bit	$C082		; Switch in ROM
	jsr	HCLR
	bit	$C080		; Switch in LC bank 2 for R/O
	rts

; SETVIEWPAGE: Set the visible page. Called with the new page in A (0..n).
; The page number is already checked to be valid by the graphics kernel.
; Must set an error code: NO (will only be called if page ok)
SETVIEWPAGE:
	tax
	.assert LOWSCR + 1 = HISCR, error
	lda	LOWSCR,x	; No BIT absolute,X available
	rts

; SETDRAWPAGE: Set the drawable page. Called with the new page in A (0..n).
; The page number is already checked to be valid by the graphics kernel.
; Must set an error code: NO (will only be called if page ok)
SETDRAWPAGE:
	tax
	beq	:+
	lda	#>$4000		; Page 2
	.byte	$2C		; BIT absolute
:	lda	#>$2000		; Page 1
	sta	PAGE
	rts

; SETCOLOR: Set the drawing color (in A). The new color is already checked
; to be in a valid range (0..maxcolor-1).
; Must set an error code: NO (will only be called if color ok)
SETCOLOR:
	bit	$C082		; Switch in ROM
	tax
	jsr	SETHCOL
	bit	$C080		; Switch in LC bank 2 for R/O
	rts

; SETPALETTE: Set the palette (not available with all drivers/hardware).
; A pointer to the palette is passed in ptr1. Must set an error if palettes
; are not supported
; Must set an error code: YES
SETPALETTE:
	lda	#TGI_ERR_INV_FUNC
	sta	ERROR
	rts

; GETPALETTE: Return the current palette in A/X. Even drivers that cannot
; set the palette should return the default palette here, so there's no
; way for this function to fail.
; Must set an error code: NO
GETPALETTE:
	; Fall through

; GETDEFPALETTE: Return the default palette for the driver in A/X. All
; drivers should return something reasonable here, even drivers that don't
; support palettes, otherwise the caller has no way to determine the colors
; of the (not changeable) palette.
; Must set an error code: NO (all drivers must have a default palette)
GETDEFPALETTE:
	lda	#<DEFPALETTE
	ldx	#>DEFPALETTE
	rts

; SETPIXEL: Draw one pixel at X1/Y1 = ptr1/ptr2 with the current drawing
; color. The coordinates passed to this function are never outside the
; visible screen area, so there is no need for clipping inside this function.
; Must set an error code: NO
SETPIXEL:
	bit	$C082		; Switch in ROM
	ldx	X1
	ldy	X1+1
	lda	Y1
	jsr	HPLOT
	bit	$C080		; Switch in LC bank 2 for R/O
	rts

; GETPIXEL: Read the color value of a pixel and return it in A/X. The
; coordinates passed to this function are never outside the visible screen
; area, so there is no need for clipping inside this function.
GETPIXEL:
	bit	$C082		; Switch in ROM
	ldx	X1
	ldy	X1+1
	lda	Y1
	jsr	HPOSN
	lda	(HBASL),y
	and	HMASK
	asl
	beq	:+		; 0 (black)
	lda	#$03		; 3 (white)
:	bcc	:+
	adc	#$03		; += 4 (black -> black2, white -> white2)
:	ldx	#$00
	bit	$C080		; Switch in LC bank 2 for R/O
	rts

; LINE: Draw a line from X1/Y1 to X2/Y2, where X1/Y1 = ptr1/ptr2 and
; X2/Y2 = ptr3/ptr4 using the current drawing color.
; Must set an error code: NO
LINE:
	bit	$C082		; Switch in ROM
	ldx	X1
	ldy	X1+1
	lda	Y1
	jsr	HPOSN
	lda	X2
	ldx	X2+1
	ldy	Y2
	jsr	HLIN
	bit	$C080		; Switch in LC bank 2 for R/O
	rts

; BAR: Draw a filled rectangle with the corners X1/Y1, X2/Y2, where
; X1/Y1 = ptr1/ptr2 and X2/Y2 = ptr3/ptr4 using the current drawing color.
; Contrary to most other functions, the graphics kernel will sort and clip
; the coordinates before calling the driver, so on entry the following
; conditions are valid:
;	X1 <= X2
;	Y1 <= Y2
;	(X1 >= 0) && (X1 < XRES)
;	(X2 >= 0) && (X2 < XRES)
;	(Y1 >= 0) && (Y1 < YRES)
;	(Y2 >= 0) && (Y2 < YRES)
; Must set an error code: NO
BAR:
	inc	Y2
:	lda	Y2
	pha
  	lda	Y1
	sta	Y2
	jsr	LINE
	pla
	sta	Y2
	inc	Y1
	cmp	Y1
	bne	:-
	rts

; TEXTSTYLE: Set the style used when calling OUTTEXT. Text scaling in X and Y
; direction is passend in X/Y, the text direction is passed in A.
; Must set an error code: NO
TEXTSTYLE:
	cmp	#TGI_TEXT_VERTICAL
	bne	:+
	lda	#48
:	sta	ROT
	rts

; OUTTEXT: Output text at X/Y = ptr1/ptr2 using the current color and the
; current text style. The text to output is given as a zero terminated
; string with address in ptr3.
; Must set an error code: NO
OUTTEXT:
	bit	$C082		; Switch in ROM
	lda	X1
	ldy	X1+1
	ldx	ROT
	php			; Save Z flag
	beq	:+		; Not horizontal
	sec
	sbc	#7		; Adjust X
	bcs	:+
	dey
:	tax
	lda	Y1
	plp			; Restore Z flag
	bne	:+		; Not vertical
	sec
	sbc	#7		; Adjust Y
:	jsr	HPOSN
	clc
	lda	FONT+2*99	; "connection char"
	adc	#<FONT
	sta	ptr4
	lda	FONT+2*99+1	; "connection char"
	adc	#>FONT
	sta	ptr4+1
	ldy	#$00
:	lda	(ptr3),y
	beq	:+
	sty	tmp1		; Save string index
	sec
	sbc	#$1F		; No control chars
	asl			; Offset * 2
	tay
	clc
	lda	FONT,y
	adc	#<FONT
	tax
	lda	FONT+1,y
	adc	#>FONT
	tay
	lda	ROT
	jsr	DRAW		; Draw char from string
	ldx	ptr4
	ldy	ptr4+1
	lda	ROT
	jsr	DRAW		; Draw "connection char"
	ldy	tmp1		; Restore string index
	iny
	bne	:-		; Branch always
:	bit	$C080		; Switch in LC bank 2 for R/O
	rts