mirror of
https://github.com/cc65/cc65.git
synced 2024-11-05 08:05:51 +00:00
168 lines
5.5 KiB
C
168 lines
5.5 KiB
C
/*
|
|
* rs232.h
|
|
*
|
|
* Ullrich von Bassewitz, 19.3.1999
|
|
*
|
|
* This module is based upon the public domain swiftlink module written by
|
|
* Craig Bruce. Thanks a lot!
|
|
*
|
|
*/
|
|
|
|
|
|
|
|
#ifndef _RS232_H
|
|
#define _RS232_h
|
|
|
|
|
|
|
|
/*****************************************************************************/
|
|
/* Data */
|
|
/*****************************************************************************/
|
|
|
|
|
|
#if defined(__C64__) || defined(__C128__)
|
|
|
|
/* Baudrate settings */
|
|
#define RS_BAUD_50 0x00
|
|
#define RS_BAUD_110 0x01
|
|
#define RS_BAUD_134_5 0x02
|
|
#define RS_BAUD_300 0x03
|
|
#define RS_BAUD_600 0x04
|
|
#define RS_BAUD_1200 0x05
|
|
#define RS_BAUD_2400 0x06
|
|
#define RS_BAUD_4800 0x07
|
|
#define RS_BAUD_9600 0x08
|
|
#define RS_BAUD_19200 0x09
|
|
#define RS_BAUD_38400 0x0A
|
|
#define RS_BAUD_57600 0x0B
|
|
#define RS_BAUD_115200 0x0C
|
|
#define RS_BAUD_230400 0x0D
|
|
|
|
/* Data bit settings */
|
|
#define RS_BITS_5 0x60
|
|
#define RS_BITS_6 0x40
|
|
#define RS_BITS_7 0x20
|
|
#define RS_BITS_8 0x00
|
|
|
|
/* Parity settings */
|
|
#define RS_PAR_NONE 0x00
|
|
#define RS_PAR_ODD 0x20
|
|
#define RS_PAR_EVEN 0x60
|
|
#define RS_PAR_MARK 0xA0
|
|
#define RS_PAR_SPACE 0xE0
|
|
|
|
/* Bit masks to mask out things from the status returned by rs232_status */
|
|
#define RS_STATUS_PE 0x01 /* Parity error */
|
|
#define RS_STATUS_FE 0x02 /* Framing error */
|
|
#define RS_STATUS_OVERRUN 0x04 /* Overrun error */
|
|
#define RS_STATUS_RDRF 0x08 /* Receiver data register full */
|
|
#define RS_STATUS_THRE 0x10 /* Transmit holding reg. empty */
|
|
#define RS_STATUS_DCD 0x20 /* NOT data carrier detect */
|
|
#define RS_STATUS_DSR 0x40 /* NOT data set ready */
|
|
#define RS_STATUS_IRQ 0x80 /* IRQ condition */
|
|
|
|
#elif defined(__ATARI__)
|
|
|
|
/* Baudrate settings */
|
|
#define RS_BAUD_300 0x00
|
|
#define RS_BAUD_45_5 0x01
|
|
#define RS_BAUD_50 0x02
|
|
#define RS_BAUD_56_875 0x03
|
|
#define RS_BAUD_75 0x04
|
|
#define RS_BAUD_110 0x05
|
|
#define RS_BAUD_134_5 0x06
|
|
#define RS_BAUD_150 0x07
|
|
/*#define RS_BAUD_300 0x08 alternative */
|
|
#define RS_BAUD_600 0x09
|
|
#define RS_BAUD_1200 0x0A
|
|
#define RS_BAUD_1800 0x0B
|
|
#define RS_BAUD_2400 0x0C
|
|
#define RS_BAUD_4800 0x0D
|
|
#define RS_BAUD_9600 0x0E
|
|
|
|
/* Data bit settings */
|
|
#define RS_BITS_5 0x30
|
|
#define RS_BITS_6 0x20
|
|
#define RS_BITS_7 0x10
|
|
#define RS_BITS_8 0x00
|
|
|
|
/* Parity settings */
|
|
#define RS_PAR_NONE 0x00
|
|
#define RS_PAR_ODD 0x05
|
|
#define RS_PAR_EVEN 0x0A
|
|
#define RS_PAR_MARK 0x03
|
|
#define RS_PAR_SPACE 0x0C
|
|
|
|
/* Bit masks to mask out things from the status returned by rs232_status */
|
|
#define RS_STATUS_PE 0x20 /* Parity error */
|
|
#define RS_STATUS_FE 0x80 /* Framing error */
|
|
#define RS_STATUS_OVERRUN 0x40 /* Overrun error */
|
|
#define RS_STATUS_RDRF 0x10 /* Receiver data register full */
|
|
|
|
#endif /* __ATARI__ section */
|
|
|
|
/* Stop bit settings */
|
|
#define RS_STOP_1 0x00
|
|
#define RS_STOP_2 0x80
|
|
|
|
/* Error codes returned by all functions */
|
|
#define RS_ERR_OK 0x00 /* Not an error - relax */
|
|
#define RS_ERR_NOT_INITIALIZED 0x01 /* Module not initialized */
|
|
#define RS_ERR_BAUD_TOO_FAST 0x02 /* Cannot handle baud rate */
|
|
#define RS_ERR_BAUD_NOT_AVAIL 0x03 /* Baud rate not available */
|
|
#define RS_ERR_NO_DATA 0x04 /* Nothing to read */
|
|
#define RS_ERR_OVERFLOW 0x05 /* No room in send buffer */
|
|
#define RS_ERR_INIT_FAILED 0x06 /* Initialization of RS232 routines failed */
|
|
|
|
|
|
|
|
/*****************************************************************************/
|
|
/* Code */
|
|
/*****************************************************************************/
|
|
|
|
|
|
|
|
unsigned char __fastcall__ rs232_init (char hacked);
|
|
/* Initialize the serial port, install the interrupt handler. The parameter
|
|
* must be true (non zero) for a hacked swiftlink and false (zero) otherwise.
|
|
*/
|
|
|
|
unsigned char __fastcall__ rs232_params (unsigned char params, unsigned char parity);
|
|
/* Set the port parameters. Use a combination of the #defined values above. */
|
|
|
|
unsigned char __fastcall__ rs232_done (void);
|
|
/* Close the port, deinstall the interrupt hander. You MUST call this function
|
|
* before terminating the program, otherwise the machine may crash later. If
|
|
* in doubt, install an exit handler using atexit(). The function will do
|
|
* nothing, if it was already called.
|
|
*/
|
|
|
|
unsigned char __fastcall__ rs232_get (char* b);
|
|
/* Get a character from the serial port. If no characters are available, the
|
|
* function will return RS_ERR_NO_DATA, so this is not a fatal error.
|
|
*/
|
|
|
|
unsigned char __fastcall__ rs232_put (char b);
|
|
/* Send a character via the serial port. There is a transmit buffer, but
|
|
* transmitting is not done via interrupt. The function returns
|
|
* RS_ERR_OVERFLOW if there is no space left in the transmit buffer.
|
|
*/
|
|
|
|
unsigned char __fastcall__ rs232_pause (void);
|
|
/* Assert flow control and disable interrupts. */
|
|
|
|
unsigned char __fastcall__ rs232_unpause (void);
|
|
/* Re-enable interrupts and release flow control */
|
|
|
|
unsigned char __fastcall__ rs232_status (unsigned char* status,
|
|
unsigned char* errors);
|
|
/* Return the serial port status. */
|
|
|
|
|
|
|
|
/* End of rs232.h */
|
|
#endif
|
|
|
|
|
|
|