1
0
mirror of https://github.com/cc65/cc65.git synced 2024-12-24 11:31:31 +00:00
cc65/libsrc/common/getcpu.s
Christian Groessler 58484449b4 remove TABs
2019-02-05 23:27:52 +01:00

134 lines
4.8 KiB
ArmAsm

;
; Ullrich von Bassewitz, 02.04.1999
;
; unsigned char getcpu (void);
;
.include "zeropage.inc"
.export _getcpu
; ---------------------------------------------------------------------------
; Subroutine to detect an 816. Returns
;
; - carry clear and 0 in A for a NMOS 6502 CPU
; - carry set and 1 in A for a 65C02
; - carry set and 2 in A for a 65816
; - carry set and 3 in A for a 4510
; - carry set and 4 in A for a 65SC02
; - carry set and 5 in A for a 65CE02
; - carry set and 6 in A for a HuC6280
; - carry clear and 7 in A for a 2a03/2a07
; - carry set and 8 in A for a 45GS02
;
; This function uses a $1A opcode which is a INA on the 816 and ignored
; (interpreted as a NOP) on a NMOS 6502. There are several CMOS versions
; of the 6502, but all of them interpret unknown opcodes as NOP so this is
; just what we want.
.p816 ; Enable 65816 instructions
_getcpu:
lda #0
inc a ; .byte $1A ; nop on nmos, inc on every cmos
cmp #1
bcc @IsNMOS
; This is at least a 65C02, check for a 65CE02/4510
.byte $42,$EA ; neg on 65CE02/4510, nop #$EA on 65C02, wdm $EA on 65816
cmp #1
beq @HasINCA
; This is at least a 65CE02, check for 4510
lda #5 ; CPU_65CE02 constant
ldx #0 ; to make sure MAP doesn't do anything, the upper nybl of X and Z must be clear
.byte $5C ; map on 4510, aug on 65CE02 (acts like 4 byte nop)
lda #3 ; CPU_4510 constant
nop
cmp #5
beq @LoadXAndReturn
; It is either a 4510 (C65) or a 45GS02 (MEGA65)
; 45GS02 supports 32-bit ZP indirect, so use that to check CPU type
; without requiring a functioning MEGA65 hypervisor.
; We setup a read of $200xx, then store a different value in $xx
; and then re-read $200xx to see if it is unchanged.
; Setup 32-bit pointer to $00020000+tmp1
lda #<$020000+tmp1
sta regsave
lda #>$020000+tmp1
sta regsave+1
sta regsave+3 ; also write to upper byte of pointer to save an extra LDA #$00
lda #^$020000+tmp1
sta regsave+2
; Prefixing LDA ($nn),Z with a NOP uses 32-bit ZP pointer on 45GS02,
; but normal 16-bit ZP pointer on 4510
; (We assume Z=$00, which will be the normal case)
nop ; prefix to tell next instruction to be 32-bit ZP
.byte $b2,regsave ; LDA (regsave),Z
eor #$ff ; change the value
sta tmp1 ; store in $xx
; now try again to load it: If the same, then 45GS02, as $200xx is unchanged
nop ; prefix to tell next instruction to be 32-bit ZP
.byte $b2,regsave ; LDA (regsave),Z
cmp tmp1 ; does the loaded value match what is in $xx?
bne @Is45GS02 ; $200xx and $xx have different values, so must be a MEGA65 45GS02
@Is4510:
lda #3 ; CPU_4510 constant
ldx #0 ; load high byte of word
rts
@Is45GS02:
lda #8 ; CPU_45GS02 constant
ldx #0 ; load high byte of word
rts
; 6502 type of cpu, check for a 2a03/2a07
@IsNMOS:
sed ; set decimal mode, no decimal mode on the 2a03/2a07
lda #9
clc
adc #1 ; $01+$09 = $10 on 6502, $01+$09 = $0A on 2a03/2a07
cld
cmp #$0a
beq @Is2a03
lda #0 ; CPU_6502 constant
beq @LoadXAndReturn
@Is2a03:
lda #7 ; CPU_2A0x constant
bne @LoadXAndReturn
; 65C02 cpu type, check for HuC6280
@CheckHuC6280:
ldx #6 ; CPU_HUC6280 constant
.byte $22,$EA ; sax nop on HuC6280 (A=$06, X=$01), nop #$EA on 65C02 (A=$01, X=$06)
bne @LoadXAndReturn
; Check for 65816/65802
@HasINCA:
xba ; .byte $EB, put $01 in B accu (nop on 65C02/65SC02)
dec a ; .byte $3A, A=$00
xba ; .byte $EB, A=$01 if 65816/65802 and A=$00 if 65C02/65SC02
inc a ; .byte $1A, A=$02 if 65816/65802 and A=$01 if 65C02/65SC02
cmp #2
beq @LoadXAndReturn
; check for 65SC02
ldy $F7
ldx #0
stx $F7
.byte $F7,$F7 ; nop nop on 65SC02, smb7 $F7 on 65C02
ldx $F7
sty $F7
cpx #$00
bne @CheckHuC6280
lda #4 ; CPU_65SC02 constant
@LoadXAndReturn:
ldx #0
rts