cc65/libsrc/c64/c64-hitjoy.s

;
; DXS/HIT-4 Player joystick driver for the C64
;
; Groepaz/Hitmen, 2002-12-23
; obviously based on Ullrichs driver :)
;

        .include "zeropage.inc"

        .include "joy-kernel.inc"
        .include "joy-error.inc"
        .include "c64.inc"

        .macpack generic

; ------------------------------------------------------------------------
; Header. Includes jump table

        .segment "JUMPTABLE"

; Driver signature

        .byte   $6A, $6F, $79	; "joy"
        .byte   JOY_API_VERSION	; Driver API version number

; Button state masks (8 values)

        .byte   $01                     ; JOY_UP
        .byte   $02                     ; JOY_DOWN
        .byte   $04                     ; JOY_LEFT
        .byte   $08                     ; JOY_RIGHT
        .byte   $10                     ; JOY_FIRE
        .byte   $00                     ; JOY_FIRE2 unavailable
        .byte   $00                     ; Future expansion
        .byte   $00                     ; Future expansion

; Jump table.

        .addr   INSTALL
        .addr   UNINSTALL
        .addr   COUNT
        .addr   READ
        .addr   IRQ

; ------------------------------------------------------------------------
; Constants

JOY_COUNT       = 4             ; Number of joysticks we support

; ------------------------------------------------------------------------
; Data. Written in the IRQ, read by the READ routine

.bss

temp3: 	.byte 0
temp4:	.byte 0

.code

; ------------------------------------------------------------------------
; INSTALL routine. Is called after the driver is loaded into memory. If
; possible, check if the hardware is present and determine the amount of
; memory available.
; Must return an JOY_ERR_xx code in a/x.
;

INSTALL:
        lda     #<JOY_ERR_OK
        ldx     #>JOY_ERR_OK

;       rts             ; Run into UNINSTALL instead

; ------------------------------------------------------------------------
; UNINSTALL routine. Is called before the driver is removed from memory.
; Can do cleanup or whatever. Must not return anything.
;

UNINSTALL:
        rts

; ------------------------------------------------------------------------
; IRQ entry point. Is called from the C layer as a subroutine in the 
; interrupt.

IRQ:    ; cia 2 setup

        ldy     #$00            ; port b direction
        sty     $dd03           ; => input

        sty     $dd05           ; cia2 timer a highbyte
        sty     $dc05           ; cia1 timer a highbyte
        iny
        sty     $dd04           ; cia2 timer a lowbyte
        sty     $dc04           ; cia1 timer a lowbyte

        lda     #%00010001
        sta     $dd0e           ; control register a
                                ; timer: start
                                ;        continous
                                ;        forced load
                                ; serial port: input

        ; cia 1 setup
        lda     #%01010001
        sta     $dc0e           ; control register a
                                ; timer: start
                                ;        continous
                                ;        forced load
                                ; serial port: output

        ; read directions 3
        lda     $dd01           ;read cia 2 port b
        and     #$0f
        sta     temp3

        ; read button 3
        lda     $dd02           ;cia 2 port a
        and     #%11111011      ;data direction
        sta     $dd02           ;=> bit 2 input

        lda     $dd00           ;read cia 2 p.A
        and     #%00000100      ;check bit 2
        asl     a
        asl     a
        ora     temp3
        sta     temp3

        ; read directions 4
        lda     $dd01           ;read cia 2 port b
        lsr     a
        lsr     a
        lsr     a
        lsr     a
        sta     temp4

        ; read button 4
        ldx     #$ff            ;serial data register
        stx     $dc0c           ;=> writing $ff causes
                                ;cia to output some
                                ;count signals at cnt1

        ldx     $dd0c           ;read cia 2 serial in
        beq     fire            ;button press if zero

        lda     temp4
        ora     #%00010000
        sta     temp4

fire:
        ; Default Value: $40/64 on PAL
        ;                    $42/66 on NTSC
        lda     #$41
        sta     $dc05
        ; Default Value: $25/37 on PAL
        ;                    $95/149 on NTSC
        lda     #0
        sta     $dc04

        rts

; ------------------------------------------------------------------------
; COUNT: Return the total number of available joysticks in a/x.
;

COUNT:  lda     #<JOY_COUNT
        ldx     #>JOY_COUNT
        rts

; ------------------------------------------------------------------------
; READ: Read a particular joystick passed in A.
;

READ:   tax            ; Joystick number into X
        bne joy2

; Read joystick 1

joy1:   lda #$7F
        sei
        sta CIA1_PRA
        lda CIA1_PRB
        cli
        and #$1F
        eor #$1F
        rts

; Read joystick 2

joy2:   dex
        bne joy3

        ; ldx	#0
        lda	#$E0
        ldy	#$FF
        sei
        sta	CIA1_DDRA
        lda	CIA1_PRA
        sty	CIA1_DDRA
        cli
        and	#$1F
        eor	#$1F
        rts

        ; Read joystick 3

joy3:   dex
        bne     joy4

        lda     temp3
        eor	#$1F
        rts

        ; Read joystick 4

joy4:   lda     temp4
        eor	#$1F
        ldx     #0
        rts