mirror of
https://github.com/cc65/cc65.git
synced 2024-12-25 17:29:50 +00:00
dacee3b9ed
All but one TGI drivers didn't use IRQs. Especially when the TGI driver kernel was the only .interruptor this meant quite some unnecessary overhead because it pulled in the whole IRQ infrastructure. The one driver using IRQs (the graphics driver for the 160x102x16 mode on the Lynx) now uses a library reference to set up a JMP to its IRQ handler.
683 lines
17 KiB
ArmAsm
683 lines
17 KiB
ArmAsm
;
|
|
; Graphics driver for the 320x200x2 and 640x200x2 modes on GEOS 64/128
|
|
; 2010-08-17, Maciej 'YTM/Elysium' Witkowiak <ytm@elysium.pl>
|
|
; 2010-08-18, Greg King
|
|
|
|
.include "zeropage.inc"
|
|
.include "tgi-kernel.inc"
|
|
.include "tgi-error.inc"
|
|
.include "const.inc"
|
|
.include "jumptab.inc"
|
|
.include "geossym.inc"
|
|
.include "geossym2.inc"
|
|
|
|
.macpack generic
|
|
.macpack module
|
|
|
|
|
|
; ------------------------------------------------------------------------
|
|
; Constants
|
|
|
|
VDC_ADDR_REG := $D600 ; VDC address
|
|
VDC_DATA_REG := $D601 ; VDC data
|
|
|
|
VDC_DSP_HI = 12 ; registers used
|
|
VDC_DSP_LO = 13
|
|
VDC_DATA_HI = 18
|
|
VDC_DATA_LO = 19
|
|
VDC_VSCROLL = 24
|
|
VDC_HSCROLL = 25
|
|
VDC_COLORS = 26
|
|
VDC_CSET = 28
|
|
VDC_COUNT = 30
|
|
VDC_DATA = 31
|
|
|
|
; ------------------------------------------------------------------------
|
|
; Header. Includes jump table and constants.
|
|
|
|
module_header _geos_tgi_tgi
|
|
|
|
; First part of the header is a structure that has a magic signature,
|
|
; and defines the capabilities of the driver.
|
|
|
|
.byte $74, $67, $69 ; "tgi"
|
|
.byte TGI_API_VERSION ; TGI API version number
|
|
.addr $0000 ; Library reference
|
|
xres: .word 320 ; X resolution
|
|
yres: .word 200 ; Y resolution
|
|
.byte 2 ; Number of drawing colors
|
|
pages: .byte 1 ; Number of screens available
|
|
.byte 8 ; System font X size
|
|
.byte 8 ; System font Y size
|
|
aspect: .word $00D4 ; Aspect ratio (based on 4/3 display)
|
|
.byte 0 ; TGI driver flags
|
|
|
|
; Next comes the jump table. With the exception of IRQ, all entries must be
|
|
; valid, and may point to an RTS for test versions (function not implemented).
|
|
|
|
.addr INSTALL
|
|
.addr UNINSTALL
|
|
.addr INIT
|
|
.addr DONE
|
|
.addr GETERROR
|
|
.addr CONTROL
|
|
.addr CLEAR
|
|
.addr SETVIEWPAGE
|
|
.addr SETDRAWPAGE
|
|
.addr SETCOLOR
|
|
.addr SETPALETTE
|
|
.addr GETPALETTE
|
|
.addr GETDEFPALETTE
|
|
.addr SETPIXEL
|
|
.addr GETPIXEL
|
|
.addr LINE
|
|
.addr BAR
|
|
.addr TEXTSTYLE
|
|
.addr OUTTEXT
|
|
|
|
; ------------------------------------------------------------------------
|
|
; Data.
|
|
|
|
; Variables mapped to the zero-page segment variables. Some of these are
|
|
; used for passing parameters to the driver.
|
|
|
|
X1 = ptr1
|
|
Y1 = ptr2
|
|
X2 = ptr3
|
|
Y2 = ptr4
|
|
|
|
; Absolute variables used in the code
|
|
|
|
.bss
|
|
|
|
SCRBASE:
|
|
.res 1 ; High byte of screen base (64k VDC only)
|
|
|
|
ERROR:
|
|
.res 1 ; Error code
|
|
PALETTE:
|
|
.res 2 ; The current palette
|
|
|
|
BITMASK:
|
|
.res 1 ; $00 = clear, $01 = set pixels
|
|
|
|
OLDCOLOR:
|
|
.res 1 ; colors before entering gfx mode
|
|
|
|
; Text output stuff
|
|
TEXTMAGX:
|
|
.res 1
|
|
TEXTMAGY:
|
|
.res 1
|
|
TEXTDIR:
|
|
.res 1
|
|
|
|
; Constants and tables
|
|
|
|
.rodata
|
|
|
|
DEFPALETTE:
|
|
.byte $00, $0f ; White on black
|
|
PALETTESIZE = * - DEFPALETTE
|
|
|
|
; color translation table (indexed by VIC color)
|
|
COLTRANS:
|
|
.byte $00, $0f, $08, $06, $0a, $04, $02, $0c
|
|
.byte $0d, $0b, $09, $01, $0e, $05, $03, $07
|
|
; colors BROWN and GRAY3 are wrong
|
|
|
|
.code
|
|
|
|
; ------------------------------------------------------------------------
|
|
; INSTALL routine. Is called after the driver is loaded into memory. May
|
|
; initialize anything that has to be done just once. Is probably empty
|
|
; most of the time.
|
|
;
|
|
; Must set an error code: NO
|
|
;
|
|
|
|
INSTALL:
|
|
lda version ; if GEOS 1.0...
|
|
and #$f0
|
|
cmp #$10
|
|
beq @L40
|
|
lda c128Flag ; at least GEOS 2.0, but we're on C128?
|
|
bpl @L40
|
|
lda graphMode ; GEOS 2.0, C128, but is 80 column screen enabled?
|
|
bmi @L80
|
|
@L40: rts ; leave default values for 40 column screen
|
|
|
|
; check for VDC version and update register $19 value
|
|
|
|
@L80:
|
|
; double the x resolution and halve the aspect ratio
|
|
|
|
asl xres
|
|
rol xres+1
|
|
|
|
lsr aspect+1
|
|
ror aspect
|
|
|
|
; update number of available screens
|
|
|
|
ldx #VDC_CSET ; determine size of RAM...
|
|
jsr VDCReadReg
|
|
sta tmp1
|
|
ora #%00010000
|
|
jsr VDCWriteReg ; turn on 64k
|
|
|
|
jsr settestadr1 ; save original value of test byte
|
|
jsr VDCReadByte
|
|
sta tmp2
|
|
|
|
lda #$55 ; write $55 here
|
|
ldy #ptr1
|
|
jsr test64k ; read it here and there
|
|
lda #$aa ; write $aa here
|
|
ldy #ptr2
|
|
jsr test64k ; read it here and there
|
|
|
|
jsr settestadr1
|
|
lda tmp2
|
|
jsr VDCWriteByte ; restore original value of test byte
|
|
|
|
lda ptr1 ; do bytes match?
|
|
cmp ptr1+1
|
|
bne @have64k
|
|
lda ptr2
|
|
cmp ptr2+1
|
|
bne @have64k
|
|
|
|
ldx #VDC_CSET
|
|
lda tmp1
|
|
jsr VDCWriteReg ; restore 16/64k flag
|
|
jmp @endok ; and leave default values for 16k
|
|
|
|
@have64k:
|
|
lda #4
|
|
sta pages
|
|
@endok:
|
|
lda #0
|
|
sta SCRBASE ; draw page 0 as default
|
|
rts
|
|
|
|
test64k:
|
|
sta tmp1
|
|
sty ptr3
|
|
lda #0
|
|
sta ptr3+1
|
|
jsr settestadr1
|
|
lda tmp1
|
|
jsr VDCWriteByte ; write $55
|
|
jsr settestadr1
|
|
jsr VDCReadByte ; read here
|
|
pha
|
|
jsr settestadr2
|
|
jsr VDCReadByte ; and there
|
|
ldy #1
|
|
sta (ptr3),y
|
|
pla
|
|
dey
|
|
sta (ptr3),y
|
|
rts
|
|
|
|
settestadr1:
|
|
ldy #$02 ; test page 2 (here)
|
|
.byte $2c
|
|
settestadr2:
|
|
ldy #$42 ; or page 64+2 (there)
|
|
lda #0
|
|
jmp VDCSetSourceAddr
|
|
|
|
; ------------------------------------------------------------------------
|
|
; UNINSTALL routine. Is called before the driver is removed from memory. May
|
|
; clean up anything done by INSTALL but is probably empty most of the time.
|
|
;
|
|
; Must set an error code: NO
|
|
;
|
|
|
|
UNINSTALL:
|
|
rts
|
|
|
|
|
|
; ------------------------------------------------------------------------
|
|
; INIT: Changes an already installed device from text mode to graphics
|
|
; mode.
|
|
; Note that INIT/DONE may be called multiple times while the driver
|
|
; is loaded, while INSTALL is only called once, so any code that is needed
|
|
; to initializes variables and so on must go here. Setting palette and
|
|
; clearing the screen is not needed because this is called by the graphics
|
|
; kernel later.
|
|
; The graphics kernel will never call INIT when a graphics mode is already
|
|
; active, so there is no need to protect against that.
|
|
;
|
|
; Must set an error code: YES
|
|
;
|
|
|
|
INIT:
|
|
ldx #$01
|
|
stx BITMASK ; solid black as pattern
|
|
lda #1
|
|
jsr SetPattern
|
|
lda #ST_WR_FORE ; write only on foreground
|
|
sta dispBufferOn
|
|
|
|
lda graphMode
|
|
bmi @L80
|
|
|
|
; Remember current color value (40 columns)
|
|
lda screencolors
|
|
sta OLDCOLOR
|
|
jmp @L99
|
|
|
|
; Remember current color value (80 columns)
|
|
@L80: lda scr80colors
|
|
sta OLDCOLOR
|
|
@L99: lda #0
|
|
jsr SETVIEWPAGE ; switch into viewpage 0
|
|
|
|
; Done, reset the error code
|
|
|
|
lda #TGI_ERR_OK
|
|
sta ERROR
|
|
rts
|
|
|
|
; ------------------------------------------------------------------------
|
|
; DONE: Will be called to switch the graphics device back into text mode.
|
|
; The graphics kernel will never call DONE when no graphics mode is active,
|
|
; so there is no need to protect against that.
|
|
;
|
|
; Must set an error code: NO
|
|
;
|
|
|
|
DONE:
|
|
lda #0
|
|
jsr SETVIEWPAGE ; switch into viewpage 0
|
|
|
|
lda graphMode
|
|
bmi @L80
|
|
|
|
lda OLDCOLOR
|
|
sta screencolors ; restore color for 40 columns
|
|
ldx #0
|
|
@L1: sta COLOR_MATRIX,x
|
|
sta COLOR_MATRIX+$0100,x
|
|
sta COLOR_MATRIX+$0200,x
|
|
sta COLOR_MATRIX+1000-256,x
|
|
inx
|
|
bne @L1
|
|
rts
|
|
|
|
@L80: lda OLDCOLOR ; restore color for 80 columns
|
|
ldx #VDC_COLORS
|
|
jmp VDCWriteReg
|
|
|
|
; ------------------------------------------------------------------------
|
|
; GETERROR: Return the error code in A and clear it.
|
|
|
|
GETERROR:
|
|
ldx #TGI_ERR_OK
|
|
lda ERROR
|
|
stx ERROR
|
|
rts
|
|
|
|
; ------------------------------------------------------------------------
|
|
; CONTROL: Platform/driver specific entry point.
|
|
;
|
|
; Must set an error code: YES
|
|
;
|
|
|
|
CONTROL:
|
|
lda #TGI_ERR_INV_FUNC
|
|
sta ERROR
|
|
rts
|
|
|
|
; ------------------------------------------------------------------------
|
|
; CLEAR: Clears the screen.
|
|
;
|
|
; Must set an error code: NO
|
|
;
|
|
|
|
CLEAR:
|
|
lda curPattern
|
|
pha
|
|
lda #0
|
|
jsr SetPattern
|
|
ldx #0
|
|
stx r3L
|
|
stx r3H
|
|
stx r2L
|
|
lda #199
|
|
sta r2H
|
|
lda graphMode
|
|
bpl @L40
|
|
lda #>639 ; 80 columns
|
|
ldx #<639
|
|
bne @L99
|
|
@L40: lda #>319 ; 40 columns
|
|
ldx #<319
|
|
@L99: sta r4H
|
|
stx r4L
|
|
jsr Rectangle
|
|
pla
|
|
sta curPattern
|
|
rts
|
|
|
|
; ------------------------------------------------------------------------
|
|
; SETVIEWPAGE: Set the visible page. Called with the new page in A (0..n).
|
|
; The page number is already checked to be valid by the graphics kernel.
|
|
;
|
|
; Must set an error code: NO (will only be called if page ok)
|
|
;
|
|
|
|
SETVIEWPAGE:
|
|
ldx graphMode
|
|
bmi @L80
|
|
rts
|
|
@L80: clc
|
|
ror
|
|
ror
|
|
ror
|
|
ldx #VDC_DSP_HI
|
|
jmp VDCWriteReg
|
|
|
|
; ------------------------------------------------------------------------
|
|
; SETDRAWPAGE: Set the drawable page. Called with the new page in A (0..n).
|
|
; The page number is already checked to be valid by the graphics kernel.
|
|
;
|
|
; Must set an error code: NO (will only be called if page ok)
|
|
;
|
|
|
|
SETDRAWPAGE:
|
|
ldx graphMode
|
|
bmi @L80
|
|
rts
|
|
@L80: clc
|
|
ror
|
|
ror
|
|
ror
|
|
sta SCRBASE
|
|
rts
|
|
|
|
; ------------------------------------------------------------------------
|
|
; SETCOLOR: Set the drawing color (in A). The new color is already checked
|
|
; to be in a valid range (0..maxcolor-1).
|
|
;
|
|
; Must set an error code: NO (will only be called if color ok)
|
|
;
|
|
|
|
SETCOLOR:
|
|
tax
|
|
beq @L1
|
|
lda #1
|
|
@L1: sta BITMASK
|
|
jmp SetPattern ; need to have either 0 or 1
|
|
|
|
; ------------------------------------------------------------------------
|
|
; SETPALETTE: Set the palette (not available with all drivers/hardware).
|
|
; A pointer to the palette is passed in ptr1. Must set an error if palettes
|
|
; are not supported
|
|
;
|
|
; Must set an error code: YES
|
|
;
|
|
|
|
SETPALETTE:
|
|
jsr GETERROR ; clear error (if any)
|
|
|
|
ldy #PALETTESIZE - 1
|
|
@L1: lda (ptr1),y ; Copy the palette
|
|
and #$0F ; Make a valid color
|
|
sta PALETTE,y
|
|
dey
|
|
bpl @L1
|
|
|
|
; Put colors from palette into screen
|
|
|
|
lda graphMode
|
|
bmi @L80
|
|
|
|
lda PALETTE+1 ; foreground
|
|
asl a
|
|
asl a
|
|
asl a
|
|
asl a
|
|
ora PALETTE ; background
|
|
ldx #0
|
|
@L2: sta COLOR_MATRIX,x
|
|
sta COLOR_MATRIX+$0100,x
|
|
sta COLOR_MATRIX+$0200,x
|
|
sta COLOR_MATRIX+1000-256,x
|
|
inx
|
|
bne @L2
|
|
rts
|
|
|
|
@L80: ldy PALETTE+1 ; Foreground color
|
|
lda COLTRANS,y
|
|
asl a
|
|
asl a
|
|
asl a
|
|
asl a
|
|
ldy PALETTE ; Background color
|
|
ora COLTRANS,y
|
|
|
|
ldx #VDC_COLORS
|
|
jmp VDCWriteReg
|
|
|
|
; ------------------------------------------------------------------------
|
|
; GETPALETTE: Return the current palette in A/X. Even drivers that cannot
|
|
; set the palette should return the default palette here, so there's no
|
|
; way for this function to fail.
|
|
;
|
|
; Must set an error code: NO
|
|
;
|
|
|
|
GETPALETTE:
|
|
lda #<PALETTE
|
|
ldx #>PALETTE
|
|
rts
|
|
|
|
; ------------------------------------------------------------------------
|
|
; GETDEFPALETTE: Return the default palette for the driver in A/X. All
|
|
; drivers should return something reasonable here, even drivers that don't
|
|
; support palettes, otherwise the caller has no way to determine the colors
|
|
; of the (not changeable) palette.
|
|
;
|
|
; Must set an error code: NO (all drivers must have a default palette)
|
|
;
|
|
|
|
GETDEFPALETTE:
|
|
lda #<DEFPALETTE
|
|
ldx #>DEFPALETTE
|
|
rts
|
|
|
|
; ------------------------------------------------------------------------
|
|
; SETPIXEL: Draw one pixel at X1/Y1 = ptr1/ptr2 with the current drawing
|
|
; color. The coordinates passed to this function are never outside the
|
|
; visible screen area, so there is no need for clipping inside this function.
|
|
;
|
|
; Must set an error code: NO
|
|
;
|
|
|
|
SETPIXEL:
|
|
lda X1
|
|
ldx X1+1
|
|
ldy Y1
|
|
sta r3L
|
|
stx r3H
|
|
sty r11L
|
|
sec
|
|
lda BITMASK ; set or clear C flag
|
|
bne @L1
|
|
clc
|
|
@L1: lda #0
|
|
jmp DrawPoint
|
|
|
|
; ------------------------------------------------------------------------
|
|
; GETPIXEL: Read the color value of a pixel and return it in A/X. The
|
|
; coordinates passed to this function are never outside the visible screen
|
|
; area, so there is no need for clipping inside this function.
|
|
|
|
|
|
GETPIXEL:
|
|
lda X1
|
|
ldx X1+1
|
|
ldy Y1
|
|
sta r3L
|
|
stx r3H
|
|
sty r11L
|
|
jsr TestPoint
|
|
ldx #0
|
|
bcc @L1
|
|
inx
|
|
@L1: txa
|
|
ldx #0
|
|
rts
|
|
|
|
; ------------------------------------------------------------------------
|
|
; LINE: Draw a line from X1/Y1 to X2/Y2, where X1/Y1 = ptr1/ptr2 and
|
|
; X2/Y2 = ptr3/ptr4 using the current drawing color.
|
|
;
|
|
; Must set an error code: NO
|
|
;
|
|
|
|
LINE:
|
|
lda X1
|
|
ldx X1+1
|
|
ldy Y1
|
|
sta r3L
|
|
stx r3H
|
|
sty r11L
|
|
lda X2
|
|
ldx X2+1
|
|
ldy Y2
|
|
sta r4L
|
|
stx r4H
|
|
sty r11H
|
|
sec
|
|
lda BITMASK ; set or clear C flag
|
|
bne @L1
|
|
clc
|
|
@L1: lda #0
|
|
jmp DrawLine
|
|
|
|
; ------------------------------------------------------------------------
|
|
; BAR: Draw a filled rectangle with the corners X1/Y1, X2/Y2, where
|
|
; X1/Y1 = ptr1/ptr2 and X2/Y2 = ptr3/ptr4 using the current drawing color.
|
|
; Contrary to most other functions, the graphics kernel will sort and clip
|
|
; the coordinates before calling the driver, so on entry the following
|
|
; conditions are valid:
|
|
; X1 <= X2
|
|
; Y1 <= Y2
|
|
; (X1 >= 0) && (X1 < XRES)
|
|
; (X2 >= 0) && (X2 < XRES)
|
|
; (Y1 >= 0) && (Y1 < YRES)
|
|
; (Y2 >= 0) && (Y2 < YRES)
|
|
;
|
|
; Must set an error code: NO
|
|
;
|
|
|
|
BAR:
|
|
lda X1
|
|
ldx X1+1
|
|
ldy Y1
|
|
sta r3L
|
|
stx r3H
|
|
sty r2L
|
|
lda X2
|
|
ldx X2+1
|
|
ldy Y2
|
|
sta r4L
|
|
stx r4H
|
|
sty r2H
|
|
jmp Rectangle
|
|
|
|
; ------------------------------------------------------------------------
|
|
; TEXTSTYLE: Set the style used when calling OUTTEXT. Text scaling in X and Y
|
|
; direction is passend in X/Y, the text direction is passed in A.
|
|
;
|
|
; Must set an error code: NO
|
|
;
|
|
|
|
TEXTSTYLE:
|
|
stx TEXTMAGX
|
|
sty TEXTMAGY
|
|
sta TEXTDIR
|
|
rts
|
|
|
|
|
|
; ------------------------------------------------------------------------
|
|
; OUTTEXT: Output text at X/Y = ptr1/ptr2 using the current color and the
|
|
; current text style. The text to output is given as a zero terminated
|
|
; string with address in ptr3.
|
|
;
|
|
; Must set an error code: NO
|
|
;
|
|
|
|
OUTTEXT:
|
|
lda TEXTDIR
|
|
; cmp #TGI_TEXT_HORIZONTAL ; this is equal 0
|
|
bne @vertical
|
|
|
|
lda X1 ; horizontal text output
|
|
ldx X1+1
|
|
ldy Y1
|
|
sta r11L
|
|
stx r11H
|
|
sty r1H
|
|
lda ptr3
|
|
ldx ptr3+1
|
|
sta r0L
|
|
stx r0H
|
|
jmp PutString
|
|
|
|
@vertical:
|
|
lda X1 ; vertical text output
|
|
ldx X1+1
|
|
ldy Y1
|
|
sta r11L
|
|
stx r11H
|
|
sty r1H
|
|
ldy #0
|
|
lda (ptr3),y
|
|
beq @end
|
|
jsr PutChar
|
|
inc ptr3
|
|
bne @L1
|
|
inc ptr3+1
|
|
@L1: lda Y1
|
|
clc
|
|
adc #8
|
|
sta Y1
|
|
bne @vertical
|
|
@end: rts
|
|
|
|
;-------------
|
|
; VDC helpers
|
|
|
|
VDCSetSourceAddr:
|
|
pha
|
|
tya
|
|
ldx #VDC_DATA_HI
|
|
jsr VDCWriteReg
|
|
pla
|
|
ldx #VDC_DATA_LO
|
|
bne VDCWriteReg
|
|
|
|
VDCReadByte:
|
|
ldx #VDC_DATA
|
|
VDCReadReg:
|
|
stx VDC_ADDR_REG
|
|
@L0: bit VDC_ADDR_REG
|
|
bpl @L0
|
|
lda VDC_DATA_REG
|
|
rts
|
|
|
|
VDCWriteByte:
|
|
ldx #VDC_DATA
|
|
VDCWriteReg:
|
|
stx VDC_ADDR_REG
|
|
@L0: bit VDC_ADDR_REG
|
|
bpl @L0
|
|
sta VDC_DATA_REG
|
|
rts
|