da4a82d8cf
The disasm command now always sets disasm = true
...
We should probably just not even offer this as an option in the debugger
then.
2018-04-13 23:35:59 -05:00
3834c1e112
The debug_break check was moved outside of the mos6502_execute function
2018-04-13 23:34:28 -05:00
04e72486f1
We need to account for the track self-sync
2018-04-13 23:31:53 -05:00
55287b4cb0
Reorganizing test files
2018-04-13 19:09:23 -05:00
a43fe0d38e
Modify test files to account for reorg
2018-04-13 18:36:02 -05:00
5db0c3b9c0
Clearer documentation on push_stack
2018-04-13 18:01:17 -05:00
3887f52119
Clarify behavior of pop_stack
2018-04-13 16:22:58 -05:00
ebb5f068fd
Always set the UNUSED and BREAK flags after execution.
...
This change simply replicates the behavior demonstrated in AppleWin.
2018-04-13 16:17:13 -05:00
5730e5e446
Add explicit definition of unused bit
2018-04-13 16:15:12 -05:00
20047c65a8
If we pressed a key, we need to set the strobe to true
2018-04-13 16:14:57 -05:00
ee2c9746c6
Add docblocks
2018-04-07 19:54:05 -05:00
6e77e99813
Add ability to debug separate from pausing
...
Also, pausing just pauses now; no debugger prompt is shown. ALT+P
toggles pausing, so just hit it again to unpause. Also, when things are
paused, you can perform other keyboard events (like quitting).
2018-04-07 11:14:12 -05:00
ec719da2c5
Remove unused vm_reflect files
2018-04-07 11:05:26 -05:00
4b0b8e1a89
Move vm_debug fully into apple2
2018-04-07 00:53:17 -05:00
27d0a15bc5
Move vm_debug_broke() check out of mos6502 and into apple2
2018-04-07 00:48:16 -05:00
18e0bde099
Remove vm_reflect.c
2018-04-07 00:39:49 -05:00
c665df3531
Move reflect to event
2018-04-07 00:33:40 -05:00
8a899f87a2
Move reflect files to event files
2018-04-07 00:32:29 -05:00
a913668c02
Missing some reorg changes; move reflect into event, debug
2018-04-07 00:26:31 -05:00
74aafb0d01
Reorganizing files into directories
2018-04-06 20:27:47 -05:00
f9d130ba97
Add an extremely crude method to slow things down
...
It's not configurable, and not accurate to any particular measure. But
it's something for now.
2018-04-06 11:49:54 -05:00
281544bf43
Avoid polling for events until we're ready for a frame redraw
...
This change drastically cuts the number of times we poll for events, and
consequently drastically speeds up the number of frames we can draw
within any given span of time.
In other words, we go from "this barely moves as fast as the actual
Apple II" to "holy shit this moves so fast".
2018-04-06 11:47:54 -05:00
f8dd49e892
Revert "Separate window and renderer creation; use software rendering"
...
This reverts commit c178e417b7
2018-04-05 20:57:09 -05:00
206bd86196
Revert "Move hires colors into include file"
...
This reverts commit d8e0159de0
2018-04-05 20:56:59 -05:00
e50af5aba9
Revert "Implement rect change stack"
...
This reverts commit 616bfdcc58
2018-04-05 20:56:46 -05:00
616bfdcc58
Implement rect change stack
2018-04-04 22:01:46 -05:00
d8e0159de0
Move hires colors into include file
2018-04-04 22:01:26 -05:00
c178e417b7
Separate window and renderer creation; use software rendering
...
It seems _slightly_ faster than hardware acceleration for the uses we
have.
2018-04-02 08:37:01 -05:00
2d0952133a
Add missing docblock comments, remove some dead code
2018-03-31 21:10:08 -05:00
418950750f
A very rough version of the correct hires render logic
2018-03-31 20:54:47 -05:00
221d798c82
Remove online checks
...
That doesn't seem to be how the motor on/off status works. This
basically stops the motor from actively spinning, but it does not
prevent the drive from basic operation.
2018-03-30 23:33:30 -05:00
2b8cdc7cfc
Remove logging, always work on a drive in switch_drive
2018-03-30 23:05:24 -05:00
6653da3c20
Rework overflow logic, and add missing handling
2018-03-30 23:04:21 -05:00
0ccabda71e
Rewrite SBC logic
...
The carry handling was incorrect; carry is set if we went below zero,
but bit 7 is not enough to determine that. It follows that negative
handling needed to be modified accordingly. Overflow handling was also
incorrect.
2018-03-30 20:07:24 -05:00
07a8a385f5
Remove log statements
2018-03-30 20:06:59 -05:00
54708e5110
Switch back to >=
2018-03-30 18:49:32 -05:00
a23c7321f5
Don't do certain operations if the drive is offline
2018-03-30 16:26:24 -05:00
d129ffed99
Logging on STA instructions
2018-03-30 16:10:15 -05:00
523b9c4a03
Several changes...
...
1. We have much more logging.
2. We were not properly turning off drives when we would get called with
C0x8.
3. We now roll over sector pos if we are greater than ENC_ETRACK.
4. We now reset sector pos when we step.
2018-03-30 16:07:58 -05:00
d2047457e9
Use log_crit() instead of log_critical()
...
This change also removes the former log_critical and log_error macros.
2018-03-29 21:45:25 -05:00
7ca099d0d0
Open log file rather than use stdout
2018-03-29 21:42:38 -05:00
20d33ef464
Change to erc.log
...
emp is a much older name for the program
2018-03-29 21:40:11 -05:00
89a0f34ebe
Add suite of log functions that map to syslog RFC levels
2018-03-29 21:39:13 -05:00
5d55d5b258
Use a bitwise-and to determine carry
...
A bitwise-and is what we do in most (all?) other cases; it's a bit
jarring to read the current logic.
2018-03-26 23:10:57 -05:00
8aef335f25
Remove unnecessary zero page code
...
This is handled in the zp_read/write functions in apple2.mem.c
2018-03-26 20:59:24 -05:00
d9be1d6ab2
We need to return from aux, or write to aux, immediately
...
If we wait until later in the function, we may get caught up in the
check for ROM.
2018-03-26 20:51:10 -05:00
92ac77e8f5
Sort read switches
2018-03-26 20:48:13 -05:00
e51e643294
Force $C059 to do nothing
2018-03-26 20:47:41 -05:00
b2e9198ede
Defensive conditionals
2018-03-26 20:46:55 -05:00
81bcc7d973
We also need to check ACC in ASL/LSR/ROL/ROR
...
And, possibly more importantly--opcode is not a bool.
2018-03-25 20:34:12 -05:00
Peter Evans