llvm-6502/test/CodeGen/R600/ds_read2.ll

; RUN: llc -march=r600 -mcpu=bonaire -verify-machineinstrs -mattr=+load-store-opt -enable-misched < %s | FileCheck -strict-whitespace -check-prefix=SI %s

; FIXME: We don't get cases where the address was an SGPR because we
; get a copy to the address register for each one.

@lds = addrspace(3) global [512 x float] zeroinitializer, align 4
 @lds.f64 = addrspace(3) global [512 x double] zeroinitializer, align 8

; SI-LABEL: @simple_read2_f32
; SI: DS_READ2_B32 v{{\[}}[[LO_VREG:[0-9]+]]:[[HI_VREG:[0-9]+]]{{\]}}, v{{[0-9]+}} offset0:0 offset1:8
; SI: S_WAITCNT lgkmcnt(0)
; SI: V_ADD_F32_e32 [[RESULT:v[0-9]+]], v[[HI_VREG]], v[[LO_VREG]]
; SI: BUFFER_STORE_DWORD [[RESULT]]
; SI: S_ENDPGM
define void @simple_read2_f32(float addrspace(1)* %out) #0 {
  %x.i = tail call i32 @llvm.r600.read.tidig.x() #1
  %arrayidx0 = getelementptr inbounds [512 x float] addrspace(3)* @lds, i32 0, i32 %x.i
  %val0 = load float addrspace(3)* %arrayidx0, align 4
  %add.x = add nsw i32 %x.i, 8
  %arrayidx1 = getelementptr inbounds [512 x float] addrspace(3)* @lds, i32 0, i32 %add.x
  %val1 = load float addrspace(3)* %arrayidx1, align 4
  %sum = fadd float %val0, %val1
  %out.gep = getelementptr inbounds float addrspace(1)* %out, i32 %x.i
  store float %sum, float addrspace(1)* %out.gep, align 4
  ret void
}

; SI-LABEL: @simple_read2_f32_max_offset
; SI: DS_READ2_B32 v{{\[}}[[LO_VREG:[0-9]+]]:[[HI_VREG:[0-9]+]]{{\]}}, v{{[0-9]+}} offset0:0 offset1:255
; SI: S_WAITCNT lgkmcnt(0)
; SI: V_ADD_F32_e32 [[RESULT:v[0-9]+]], v[[HI_VREG]], v[[LO_VREG]]
; SI: BUFFER_STORE_DWORD [[RESULT]]
; SI: S_ENDPGM
define void @simple_read2_f32_max_offset(float addrspace(1)* %out) #0 {
  %x.i = tail call i32 @llvm.r600.read.tidig.x() #1
  %arrayidx0 = getelementptr inbounds [512 x float] addrspace(3)* @lds, i32 0, i32 %x.i
  %val0 = load float addrspace(3)* %arrayidx0, align 4
  %add.x = add nsw i32 %x.i, 255
  %arrayidx1 = getelementptr inbounds [512 x float] addrspace(3)* @lds, i32 0, i32 %add.x
  %val1 = load float addrspace(3)* %arrayidx1, align 4
  %sum = fadd float %val0, %val1
  %out.gep = getelementptr inbounds float addrspace(1)* %out, i32 %x.i
  store float %sum, float addrspace(1)* %out.gep, align 4
  ret void
}

; SI-LABEL: @simple_read2_f32_too_far
; SI-NOT DS_READ2_B32
; SI: DS_READ_B32 v{{[0-9]+}}, v{{[0-9]+}}
; SI: DS_READ_B32 v{{[0-9]+}}, v{{[0-9]+}} offset:1028
; SI: S_ENDPGM
define void @simple_read2_f32_too_far(float addrspace(1)* %out) #0 {
  %x.i = tail call i32 @llvm.r600.read.tidig.x() #1
  %arrayidx0 = getelementptr inbounds [512 x float] addrspace(3)* @lds, i32 0, i32 %x.i
  %val0 = load float addrspace(3)* %arrayidx0, align 4
  %add.x = add nsw i32 %x.i, 257
  %arrayidx1 = getelementptr inbounds [512 x float] addrspace(3)* @lds, i32 0, i32 %add.x
  %val1 = load float addrspace(3)* %arrayidx1, align 4
  %sum = fadd float %val0, %val1
  %out.gep = getelementptr inbounds float addrspace(1)* %out, i32 %x.i
  store float %sum, float addrspace(1)* %out.gep, align 4
  ret void
}

; SI-LABEL: @simple_read2_f32_x2
; SI: DS_READ2_B32 v{{\[[0-9]+:[0-9]+\]}}, [[BASEADDR:v[0-9]+]] offset0:0 offset1:8
; SI: DS_READ2_B32 v{{\[[0-9]+:[0-9]+\]}}, [[BASEADDR]] offset0:11 offset1:27
; SI: S_ENDPGM
define void @simple_read2_f32_x2(float addrspace(1)* %out) #0 {
  %tid.x = tail call i32 @llvm.r600.read.tidig.x() #1
  %idx.0 = add nsw i32 %tid.x, 0
  %arrayidx0 = getelementptr inbounds [512 x float] addrspace(3)* @lds, i32 0, i32 %idx.0
  %val0 = load float addrspace(3)* %arrayidx0, align 4

  %idx.1 = add nsw i32 %tid.x, 8
  %arrayidx1 = getelementptr inbounds [512 x float] addrspace(3)* @lds, i32 0, i32 %idx.1
  %val1 = load float addrspace(3)* %arrayidx1, align 4
  %sum.0 = fadd float %val0, %val1

  %idx.2 = add nsw i32 %tid.x, 11
  %arrayidx2 = getelementptr inbounds [512 x float] addrspace(3)* @lds, i32 0, i32 %idx.2
  %val2 = load float addrspace(3)* %arrayidx2, align 4

  %idx.3 = add nsw i32 %tid.x, 27
  %arrayidx3 = getelementptr inbounds [512 x float] addrspace(3)* @lds, i32 0, i32 %idx.3
  %val3 = load float addrspace(3)* %arrayidx3, align 4
  %sum.1 = fadd float %val2, %val3

  %sum = fadd float %sum.0, %sum.1
  %out.gep = getelementptr inbounds float addrspace(1)* %out, i32 %idx.0
  store float %sum, float addrspace(1)* %out.gep, align 4
  ret void
}

; Make sure there is an instruction between the two sets of reads.
; SI-LABEL: @simple_read2_f32_x2_barrier
; SI: DS_READ2_B32 v{{\[[0-9]+:[0-9]+\]}}, [[BASEADDR:v[0-9]+]] offset0:0 offset1:8
; SI: S_BARRIER
; SI: DS_READ2_B32 v{{\[[0-9]+:[0-9]+\]}}, [[BASEADDR]] offset0:11 offset1:27
; SI: S_ENDPGM
define void @simple_read2_f32_x2_barrier(float addrspace(1)* %out) #0 {
  %tid.x = tail call i32 @llvm.r600.read.tidig.x() #1
  %idx.0 = add nsw i32 %tid.x, 0
  %arrayidx0 = getelementptr inbounds [512 x float] addrspace(3)* @lds, i32 0, i32 %idx.0
  %val0 = load float addrspace(3)* %arrayidx0, align 4

  %idx.1 = add nsw i32 %tid.x, 8
  %arrayidx1 = getelementptr inbounds [512 x float] addrspace(3)* @lds, i32 0, i32 %idx.1
  %val1 = load float addrspace(3)* %arrayidx1, align 4
  %sum.0 = fadd float %val0, %val1

  call void @llvm.AMDGPU.barrier.local() #2

  %idx.2 = add nsw i32 %tid.x, 11
  %arrayidx2 = getelementptr inbounds [512 x float] addrspace(3)* @lds, i32 0, i32 %idx.2
  %val2 = load float addrspace(3)* %arrayidx2, align 4

  %idx.3 = add nsw i32 %tid.x, 27
  %arrayidx3 = getelementptr inbounds [512 x float] addrspace(3)* @lds, i32 0, i32 %idx.3
  %val3 = load float addrspace(3)* %arrayidx3, align 4
  %sum.1 = fadd float %val2, %val3

  %sum = fadd float %sum.0, %sum.1
  %out.gep = getelementptr inbounds float addrspace(1)* %out, i32 %idx.0
  store float %sum, float addrspace(1)* %out.gep, align 4
  ret void
}

; For some reason adding something to the base address for the first
; element results in only folding the inner pair.

; SI-LABEL: @simple_read2_f32_x2_nonzero_base
; SI: DS_READ2_B32 v{{\[[0-9]+:[0-9]+\]}}, [[BASEADDR:v[0-9]+]] offset0:2 offset1:8
; SI: DS_READ2_B32 v{{\[[0-9]+:[0-9]+\]}}, [[BASEADDR]] offset0:11 offset1:27
; SI: S_ENDPGM
define void @simple_read2_f32_x2_nonzero_base(float addrspace(1)* %out) #0 {
  %tid.x = tail call i32 @llvm.r600.read.tidig.x() #1
  %idx.0 = add nsw i32 %tid.x, 2
  %arrayidx0 = getelementptr inbounds [512 x float] addrspace(3)* @lds, i32 0, i32 %idx.0
  %val0 = load float addrspace(3)* %arrayidx0, align 4

  %idx.1 = add nsw i32 %tid.x, 8
  %arrayidx1 = getelementptr inbounds [512 x float] addrspace(3)* @lds, i32 0, i32 %idx.1
  %val1 = load float addrspace(3)* %arrayidx1, align 4
  %sum.0 = fadd float %val0, %val1

  %idx.2 = add nsw i32 %tid.x, 11
  %arrayidx2 = getelementptr inbounds [512 x float] addrspace(3)* @lds, i32 0, i32 %idx.2
  %val2 = load float addrspace(3)* %arrayidx2, align 4

  %idx.3 = add nsw i32 %tid.x, 27
  %arrayidx3 = getelementptr inbounds [512 x float] addrspace(3)* @lds, i32 0, i32 %idx.3
  %val3 = load float addrspace(3)* %arrayidx3, align 4
  %sum.1 = fadd float %val2, %val3

  %sum = fadd float %sum.0, %sum.1
  %out.gep = getelementptr inbounds float addrspace(1)* %out, i32 %idx.0
  store float %sum, float addrspace(1)* %out.gep, align 4
  ret void
}

; Be careful of vectors of pointers. We don't know if the 2 pointers
; in the vectors are really the same base, so this is not safe to
; merge.
; Base pointers come from different subregister of same super
; register. We can't safely merge this.

; SI-LABEL: @read2_ptr_is_subreg_arg_f32
; SI-NOT: DS_READ2_B32
; SI: DS_READ_B32
; SI: DS_READ_B32
; SI: S_ENDPGM
define void @read2_ptr_is_subreg_arg_f32(float addrspace(1)* %out, <2 x float addrspace(3)*> %lds.ptr) #0 {
  %x.i = tail call i32 @llvm.r600.read.tidig.x() #1
  %index.0 = insertelement <2 x i32> undef, i32 %x.i, i32 0
  %index.1 = insertelement <2 x i32> %index.0, i32 8, i32 0
  %gep = getelementptr inbounds <2 x float addrspace(3)*> %lds.ptr, <2 x i32> %index.1
  %gep.0 = extractelement <2 x float addrspace(3)*> %gep, i32 0
  %gep.1 = extractelement <2 x float addrspace(3)*> %gep, i32 1
  %val0 = load float addrspace(3)* %gep.0, align 4
  %val1 = load float addrspace(3)* %gep.1, align 4
  %add.x = add nsw i32 %x.i, 8
  %sum = fadd float %val0, %val1
  %out.gep = getelementptr inbounds float addrspace(1)* %out, i32 %x.i
  store float %sum, float addrspace(1)* %out.gep, align 4
  ret void
}

; Apply a constant scalar offset after the pointer vector extract.  We
; are rejecting merges that have the same, constant 0 offset, so make
; sure we are really rejecting it because of the different
; subregisters.

; SI-LABEL: @read2_ptr_is_subreg_arg_offset_f32
; SI-NOT: DS_READ2_B32
; SI: DS_READ_B32
; SI: DS_READ_B32
; SI: S_ENDPGM
define void @read2_ptr_is_subreg_arg_offset_f32(float addrspace(1)* %out, <2 x float addrspace(3)*> %lds.ptr) #0 {
  %x.i = tail call i32 @llvm.r600.read.tidig.x() #1
  %index.0 = insertelement <2 x i32> undef, i32 %x.i, i32 0
  %index.1 = insertelement <2 x i32> %index.0, i32 8, i32 0
  %gep = getelementptr inbounds <2 x float addrspace(3)*> %lds.ptr, <2 x i32> %index.1
  %gep.0 = extractelement <2 x float addrspace(3)*> %gep, i32 0
  %gep.1 = extractelement <2 x float addrspace(3)*> %gep, i32 1

  ; Apply an additional offset after the vector that will be more obviously folded.
  %gep.1.offset = getelementptr float addrspace(3)* %gep.1, i32 8

  %val0 = load float addrspace(3)* %gep.0, align 4
  %val1 = load float addrspace(3)* %gep.1.offset, align 4
  %add.x = add nsw i32 %x.i, 8
  %sum = fadd float %val0, %val1
  %out.gep = getelementptr inbounds float addrspace(1)* %out, i32 %x.i
  store float %sum, float addrspace(1)* %out.gep, align 4
  ret void
}

; We should be able to merge in this case, but probably not worth the effort.
; SI-NOT: DS_READ2_B32
; SI: DS_READ_B32
; SI: DS_READ_B32
; SI: S_ENDPGM
define void @read2_ptr_is_subreg_f32(float addrspace(1)* %out) #0 {
  %x.i = tail call i32 @llvm.r600.read.tidig.x() #1
  %ptr.0 = insertelement <2 x [512 x float] addrspace(3)*> undef, [512 x float] addrspace(3)* @lds, i32 0
  %ptr.1 = insertelement <2 x [512 x float] addrspace(3)*> %ptr.0, [512 x float] addrspace(3)* @lds, i32 1
  %x.i.v.0 = insertelement <2 x i32> undef, i32 %x.i, i32 0
  %x.i.v.1 = insertelement <2 x i32> %x.i.v.0, i32 %x.i, i32 1
  %idx = add <2 x i32> %x.i.v.1, <i32 0, i32 8>
  %gep = getelementptr inbounds <2 x [512 x float] addrspace(3)*> %ptr.1, <2 x i32> <i32 0, i32 0>, <2 x i32> %idx
  %gep.0 = extractelement <2 x float addrspace(3)*> %gep, i32 0
  %gep.1 = extractelement <2 x float addrspace(3)*> %gep, i32 1
  %val0 = load float addrspace(3)* %gep.0, align 4
  %val1 = load float addrspace(3)* %gep.1, align 4
  %add.x = add nsw i32 %x.i, 8
  %sum = fadd float %val0, %val1
  %out.gep = getelementptr inbounds float addrspace(1)* %out, i32 %x.i
  store float %sum, float addrspace(1)* %out.gep, align 4
  ret void
}

; SI-LABEL: @simple_read2_f32_volatile_0
; SI-NOT DS_READ2_B32
; SI: DS_READ_B32 v{{[0-9]+}}, v{{[0-9]+}}
; SI: DS_READ_B32 v{{[0-9]+}}, v{{[0-9]+}} offset:32
; SI: S_ENDPGM
define void @simple_read2_f32_volatile_0(float addrspace(1)* %out) #0 {
  %x.i = tail call i32 @llvm.r600.read.tidig.x() #1
  %arrayidx0 = getelementptr inbounds [512 x float] addrspace(3)* @lds, i32 0, i32 %x.i
  %val0 = load volatile float addrspace(3)* %arrayidx0, align 4
  %add.x = add nsw i32 %x.i, 8
  %arrayidx1 = getelementptr inbounds [512 x float] addrspace(3)* @lds, i32 0, i32 %add.x
  %val1 = load float addrspace(3)* %arrayidx1, align 4
  %sum = fadd float %val0, %val1
  %out.gep = getelementptr inbounds float addrspace(1)* %out, i32 %x.i
  store float %sum, float addrspace(1)* %out.gep, align 4
  ret void
}

; SI-LABEL: @simple_read2_f32_volatile_1
; SI-NOT DS_READ2_B32
; SI: DS_READ_B32 v{{[0-9]+}}, v{{[0-9]+}}
; SI: DS_READ_B32 v{{[0-9]+}}, v{{[0-9]+}} offset:32
; SI: S_ENDPGM
define void @simple_read2_f32_volatile_1(float addrspace(1)* %out) #0 {
  %x.i = tail call i32 @llvm.r600.read.tidig.x() #1
  %arrayidx0 = getelementptr inbounds [512 x float] addrspace(3)* @lds, i32 0, i32 %x.i
  %val0 = load float addrspace(3)* %arrayidx0, align 4
  %add.x = add nsw i32 %x.i, 8
  %arrayidx1 = getelementptr inbounds [512 x float] addrspace(3)* @lds, i32 0, i32 %add.x
  %val1 = load volatile float addrspace(3)* %arrayidx1, align 4
  %sum = fadd float %val0, %val1
  %out.gep = getelementptr inbounds float addrspace(1)* %out, i32 %x.i
  store float %sum, float addrspace(1)* %out.gep, align 4
  ret void
}

; Can't fold since not correctly aligned.
; XXX: This isn't really testing anything useful now. I think CI
; allows unaligned LDS accesses, which would be a problem here.
; SI-LABEL: @unaligned_read2_f32
; SI-NOT: DS_READ2_B32
; SI: S_ENDPGM
define void @unaligned_read2_f32(float addrspace(1)* %out, float addrspace(3)* %lds) #0 {
  %x.i = tail call i32 @llvm.r600.read.tidig.x() #1
  %arrayidx0 = getelementptr inbounds float addrspace(3)* %lds, i32 %x.i
  %val0 = load float addrspace(3)* %arrayidx0, align 1
  %add.x = add nsw i32 %x.i, 8
  %arrayidx1 = getelementptr inbounds float addrspace(3)* %lds, i32 %add.x
  %val1 = load float addrspace(3)* %arrayidx1, align 1
  %sum = fadd float %val0, %val1
  %out.gep = getelementptr inbounds float addrspace(1)* %out, i32 %x.i
  store float %sum, float addrspace(1)* %out.gep, align 4
  ret void
}

; SI-LABEL: @misaligned_2_simple_read2_f32
; SI-NOT: DS_READ2_B32
; SI: S_ENDPGM
define void @misaligned_2_simple_read2_f32(float addrspace(1)* %out, float addrspace(3)* %lds) #0 {
  %x.i = tail call i32 @llvm.r600.read.tidig.x() #1
  %arrayidx0 = getelementptr inbounds float addrspace(3)* %lds, i32 %x.i
  %val0 = load float addrspace(3)* %arrayidx0, align 2
  %add.x = add nsw i32 %x.i, 8
  %arrayidx1 = getelementptr inbounds float addrspace(3)* %lds, i32 %add.x
  %val1 = load float addrspace(3)* %arrayidx1, align 2
  %sum = fadd float %val0, %val1
  %out.gep = getelementptr inbounds float addrspace(1)* %out, i32 %x.i
  store float %sum, float addrspace(1)* %out.gep, align 4
  ret void
}

; SI-LABEL: @simple_read2_f64
; SI: V_LSHLREV_B32_e32 [[VPTR:v[0-9]+]], 3, {{v[0-9]+}}
; SI: DS_READ2_B64 v{{\[}}[[LO_VREG:[0-9]+]]:[[HI_VREG:[0-9]+]]{{\]}}, [[VPTR]] offset0:0 offset1:8
; SI: V_ADD_F64 [[RESULT:v\[[0-9]+:[0-9]+\]]], v{{\[}}[[LO_VREG]]:{{[0-9]+\]}}, v{{\[[0-9]+}}:[[HI_VREG]]{{\]}}
; SI: BUFFER_STORE_DWORDX2 [[RESULT]]
; SI: S_ENDPGM
define void @simple_read2_f64(double addrspace(1)* %out) #0 {
  %x.i = tail call i32 @llvm.r600.read.tidig.x() #1
  %arrayidx0 = getelementptr inbounds [512 x double] addrspace(3)* @lds.f64, i32 0, i32 %x.i
  %val0 = load double addrspace(3)* %arrayidx0, align 8
  %add.x = add nsw i32 %x.i, 8
  %arrayidx1 = getelementptr inbounds [512 x double] addrspace(3)* @lds.f64, i32 0, i32 %add.x
  %val1 = load double addrspace(3)* %arrayidx1, align 8
  %sum = fadd double %val0, %val1
  %out.gep = getelementptr inbounds double addrspace(1)* %out, i32 %x.i
  store double %sum, double addrspace(1)* %out.gep, align 8
  ret void
}

; SI-LABEL: @simple_read2_f64_max_offset
; SI: DS_READ2_B64 {{v\[[0-9]+:[0-9]+\]}}, v{{[0-9]+}} offset0:0 offset1:255
; SI: S_ENDPGM
define void @simple_read2_f64_max_offset(double addrspace(1)* %out) #0 {
  %x.i = tail call i32 @llvm.r600.read.tidig.x() #1
  %arrayidx0 = getelementptr inbounds [512 x double] addrspace(3)* @lds.f64, i32 0, i32 %x.i
  %val0 = load double addrspace(3)* %arrayidx0, align 8
  %add.x = add nsw i32 %x.i, 255
  %arrayidx1 = getelementptr inbounds [512 x double] addrspace(3)* @lds.f64, i32 0, i32 %add.x
  %val1 = load double addrspace(3)* %arrayidx1, align 8
  %sum = fadd double %val0, %val1
  %out.gep = getelementptr inbounds double addrspace(1)* %out, i32 %x.i
  store double %sum, double addrspace(1)* %out.gep, align 8
  ret void
}

; SI-LABEL: @simple_read2_f64_too_far
; SI-NOT DS_READ2_B64
; SI: DS_READ_B64 {{v\[[0-9]+:[0-9]+\]}}, v{{[0-9]+}}
; SI: DS_READ_B64 {{v\[[0-9]+:[0-9]+\]}}, v{{[0-9]+}} offset:2056
; SI: S_ENDPGM
define void @simple_read2_f64_too_far(double addrspace(1)* %out) #0 {
  %x.i = tail call i32 @llvm.r600.read.tidig.x() #1
  %arrayidx0 = getelementptr inbounds [512 x double] addrspace(3)* @lds.f64, i32 0, i32 %x.i
  %val0 = load double addrspace(3)* %arrayidx0, align 8
  %add.x = add nsw i32 %x.i, 257
  %arrayidx1 = getelementptr inbounds [512 x double] addrspace(3)* @lds.f64, i32 0, i32 %add.x
  %val1 = load double addrspace(3)* %arrayidx1, align 8
  %sum = fadd double %val0, %val1
  %out.gep = getelementptr inbounds double addrspace(1)* %out, i32 %x.i
  store double %sum, double addrspace(1)* %out.gep, align 8
  ret void
}

; Alignment only 4
; SI-LABEL: @misaligned_read2_f64
; SI: DS_READ2_B32 v{{\[[0-9]+:[0-9]+\]}}, {{v[0-9]+}} offset0:0 offset1:1
; SI: DS_READ2_B32 v{{\[[0-9]+:[0-9]+\]}}, {{v[0-9]+}} offset0:14 offset1:15
; SI: S_ENDPGM
define void @misaligned_read2_f64(double addrspace(1)* %out, double addrspace(3)* %lds) #0 {
  %x.i = tail call i32 @llvm.r600.read.tidig.x() #1
  %arrayidx0 = getelementptr inbounds double addrspace(3)* %lds, i32 %x.i
  %val0 = load double addrspace(3)* %arrayidx0, align 4
  %add.x = add nsw i32 %x.i, 7
  %arrayidx1 = getelementptr inbounds double addrspace(3)* %lds, i32 %add.x
  %val1 = load double addrspace(3)* %arrayidx1, align 4
  %sum = fadd double %val0, %val1
  %out.gep = getelementptr inbounds double addrspace(1)* %out, i32 %x.i
  store double %sum, double addrspace(1)* %out.gep, align 4
  ret void
}

@foo = addrspace(3) global [4 x i32] zeroinitializer, align 4

; SI-LABEL: @load_constant_adjacent_offsets
; SI: V_MOV_B32_e32 [[ZERO:v[0-9]+]], 0{{$}}
; SI: DS_READ2_B32 v{{\[[0-9]+:[0-9]+\]}}, [[ZERO]] offset0:0 offset1:1
define void @load_constant_adjacent_offsets(i32 addrspace(1)* %out) {
  %val0 = load i32 addrspace(3)* getelementptr inbounds ([4 x i32] addrspace(3)* @foo, i32 0, i32 0), align 4
  %val1 = load i32 addrspace(3)* getelementptr inbounds ([4 x i32] addrspace(3)* @foo, i32 0, i32 1), align 4
  %sum = add i32 %val0, %val1
  store i32 %sum, i32 addrspace(1)* %out, align 4
  ret void
}

; SI-LABEL: @load_constant_disjoint_offsets
; SI: V_MOV_B32_e32 [[ZERO:v[0-9]+]], 0{{$}}
; SI: DS_READ2_B32 v{{\[[0-9]+:[0-9]+\]}}, [[ZERO]] offset0:0 offset1:2
define void @load_constant_disjoint_offsets(i32 addrspace(1)* %out) {
  %val0 = load i32 addrspace(3)* getelementptr inbounds ([4 x i32] addrspace(3)* @foo, i32 0, i32 0), align 4
  %val1 = load i32 addrspace(3)* getelementptr inbounds ([4 x i32] addrspace(3)* @foo, i32 0, i32 2), align 4
  %sum = add i32 %val0, %val1
  store i32 %sum, i32 addrspace(1)* %out, align 4
  ret void
}

@sgemm.lA = internal unnamed_addr addrspace(3) global [264 x float] zeroinitializer, align 4
@sgemm.lB = internal unnamed_addr addrspace(3) global [776 x float] zeroinitializer, align 4

define void @sgemm_inner_loop_read2_sequence(float addrspace(1)* %C, i32 %lda, i32 %ldb) #0 {
  %x.i = tail call i32 @llvm.r600.read.tgid.x() #1
  %y.i = tail call i32 @llvm.r600.read.tidig.y() #1
  %arrayidx44 = getelementptr inbounds [264 x float] addrspace(3)* @sgemm.lA, i32 0, i32 %x.i
  %tmp16 = load float addrspace(3)* %arrayidx44, align 4
  %add47 = add nsw i32 %x.i, 1
  %arrayidx48 = getelementptr inbounds [264 x float] addrspace(3)* @sgemm.lA, i32 0, i32 %add47
  %tmp17 = load float addrspace(3)* %arrayidx48, align 4
  %add51 = add nsw i32 %x.i, 16
  %arrayidx52 = getelementptr inbounds [264 x float] addrspace(3)* @sgemm.lA, i32 0, i32 %add51
  %tmp18 = load float addrspace(3)* %arrayidx52, align 4
  %add55 = add nsw i32 %x.i, 17
  %arrayidx56 = getelementptr inbounds [264 x float] addrspace(3)* @sgemm.lA, i32 0, i32 %add55
  %tmp19 = load float addrspace(3)* %arrayidx56, align 4
  %arrayidx60 = getelementptr inbounds [776 x float] addrspace(3)* @sgemm.lB, i32 0, i32 %y.i
  %tmp20 = load float addrspace(3)* %arrayidx60, align 4
  %add63 = add nsw i32 %y.i, 1
  %arrayidx64 = getelementptr inbounds [776 x float] addrspace(3)* @sgemm.lB, i32 0, i32 %add63
  %tmp21 = load float addrspace(3)* %arrayidx64, align 4
  %add67 = add nsw i32 %y.i, 32
  %arrayidx68 = getelementptr inbounds [776 x float] addrspace(3)* @sgemm.lB, i32 0, i32 %add67
  %tmp22 = load float addrspace(3)* %arrayidx68, align 4
  %add71 = add nsw i32 %y.i, 33
  %arrayidx72 = getelementptr inbounds [776 x float] addrspace(3)* @sgemm.lB, i32 0, i32 %add71
  %tmp23 = load float addrspace(3)* %arrayidx72, align 4
  %add75 = add nsw i32 %y.i, 64
  %arrayidx76 = getelementptr inbounds [776 x float] addrspace(3)* @sgemm.lB, i32 0, i32 %add75
  %tmp24 = load float addrspace(3)* %arrayidx76, align 4
  %add79 = add nsw i32 %y.i, 65
  %arrayidx80 = getelementptr inbounds [776 x float] addrspace(3)* @sgemm.lB, i32 0, i32 %add79
  %tmp25 = load float addrspace(3)* %arrayidx80, align 4
  %sum.0 = fadd float %tmp16, %tmp17
  %sum.1 = fadd float %sum.0, %tmp18
  %sum.2 = fadd float %sum.1, %tmp19
  %sum.3 = fadd float %sum.2, %tmp20
  %sum.4 = fadd float %sum.3, %tmp21
  %sum.5 = fadd float %sum.4, %tmp22
  %sum.6 = fadd float %sum.5, %tmp23
  %sum.7 = fadd float %sum.6, %tmp24
  %sum.8 = fadd float %sum.7, %tmp25
  store float %sum.8, float addrspace(1)* %C, align 4
  ret void
}

define void @misaligned_read2_v2i32(<2 x i32> addrspace(1)* %out, <2 x i32> addrspace(3)* %in) #0 {
  %load = load <2 x i32> addrspace(3)* %in, align 4
  store <2 x i32> %load, <2 x i32> addrspace(1)* %out, align 8
  ret void
}

define void @misaligned_read2_i64(i64 addrspace(1)* %out, i64 addrspace(3)* %in) #0 {
  %load = load i64 addrspace(3)* %in, align 4
  store i64 %load, i64 addrspace(1)* %out, align 8
  ret void
}

; Function Attrs: nounwind readnone
declare i32 @llvm.r600.read.tgid.x() #1

; Function Attrs: nounwind readnone
declare i32 @llvm.r600.read.tgid.y() #1

; Function Attrs: nounwind readnone
declare i32 @llvm.r600.read.tidig.x() #1

; Function Attrs: nounwind readnone
declare i32 @llvm.r600.read.tidig.y() #1

; Function Attrs: noduplicate nounwind
declare void @llvm.AMDGPU.barrier.local() #2

attributes #0 = { nounwind "less-precise-fpmad"="false" "no-frame-pointer-elim"="false" "no-infs-fp-math"="false" "no-nans-fp-math"="false" "no-realign-stack" "stack-protector-buffer-size"="8" "unsafe-fp-math"="false" "use-soft-float"="false" }
attributes #1 = { nounwind readnone }
attributes #2 = { noduplicate nounwind }