2015-02-15 06:37:21 +00:00
|
|
|
; RUN: llc < %s -mcpu=x86-64 -mattr=+sse2 -x86-experimental-vector-shuffle-legality | FileCheck %s --check-prefix=ALL --check-prefix=SSE --check-prefix=SSE2
|
|
|
|
; RUN: llc < %s -mcpu=x86-64 -mattr=+ssse3 -x86-experimental-vector-shuffle-legality | FileCheck %s --check-prefix=ALL --check-prefix=SSE --check-prefix=SSSE3
|
|
|
|
; RUN: llc < %s -mcpu=x86-64 -mattr=+sse4.1 -x86-experimental-vector-shuffle-legality | FileCheck %s --check-prefix=ALL --check-prefix=SSE --check-prefix=SSE41
|
|
|
|
; RUN: llc < %s -mcpu=x86-64 -mattr=+avx -x86-experimental-vector-shuffle-legality | FileCheck %s --check-prefix=ALL --check-prefix=AVX --check-prefix=AVX1
|
|
|
|
; RUN: llc < %s -mcpu=x86-64 -mattr=+avx2 -x86-experimental-vector-shuffle-legality | FileCheck %s --check-prefix=ALL --check-prefix=AVX --check-prefix=AVX2
|
2014-10-02 07:13:25 +00:00
|
|
|
;
|
|
|
|
; Verify that the DAG combiner correctly folds bitwise operations across
|
|
|
|
; shuffles, nested shuffles with undef, pairs of nested shuffles, and other
|
|
|
|
; basic and always-safe patterns. Also test that the DAG combiner will combine
|
|
|
|
; target-specific shuffle instructions where reasonable.
|
2014-06-27 11:34:40 +00:00
|
|
|
|
|
|
|
target triple = "x86_64-unknown-unknown"
|
|
|
|
|
2014-06-27 11:40:13 +00:00
|
|
|
declare <4 x i32> @llvm.x86.sse2.pshuf.d(<4 x i32>, i8)
|
2014-06-27 11:34:40 +00:00
|
|
|
declare <8 x i16> @llvm.x86.sse2.pshufl.w(<8 x i16>, i8)
|
|
|
|
declare <8 x i16> @llvm.x86.sse2.pshufh.w(<8 x i16>, i8)
|
|
|
|
|
2014-06-27 11:40:13 +00:00
|
|
|
define <4 x i32> @combine_pshufd1(<4 x i32> %a) {
|
2014-10-02 07:22:26 +00:00
|
|
|
; ALL-LABEL: combine_pshufd1:
|
|
|
|
; ALL: # BB#0: # %entry
|
|
|
|
; ALL-NEXT: retq
|
|
|
|
entry:
|
|
|
|
%b = call <4 x i32> @llvm.x86.sse2.pshuf.d(<4 x i32> %a, i8 27)
|
|
|
|
%c = call <4 x i32> @llvm.x86.sse2.pshuf.d(<4 x i32> %b, i8 27)
|
2014-06-27 11:40:13 +00:00
|
|
|
ret <4 x i32> %c
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x i32> @combine_pshufd2(<4 x i32> %a) {
|
2014-10-02 07:22:26 +00:00
|
|
|
; ALL-LABEL: combine_pshufd2:
|
|
|
|
; ALL: # BB#0: # %entry
|
|
|
|
; ALL-NEXT: retq
|
|
|
|
entry:
|
|
|
|
%b = call <4 x i32> @llvm.x86.sse2.pshuf.d(<4 x i32> %a, i8 27)
|
2014-06-27 11:40:13 +00:00
|
|
|
%b.cast = bitcast <4 x i32> %b to <8 x i16>
|
|
|
|
%c = call <8 x i16> @llvm.x86.sse2.pshufl.w(<8 x i16> %b.cast, i8 -28)
|
|
|
|
%c.cast = bitcast <8 x i16> %c to <4 x i32>
|
2014-10-02 07:22:26 +00:00
|
|
|
%d = call <4 x i32> @llvm.x86.sse2.pshuf.d(<4 x i32> %c.cast, i8 27)
|
2014-06-27 11:40:13 +00:00
|
|
|
ret <4 x i32> %d
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x i32> @combine_pshufd3(<4 x i32> %a) {
|
2014-10-02 07:22:26 +00:00
|
|
|
; ALL-LABEL: combine_pshufd3:
|
|
|
|
; ALL: # BB#0: # %entry
|
|
|
|
; ALL-NEXT: retq
|
|
|
|
entry:
|
|
|
|
%b = call <4 x i32> @llvm.x86.sse2.pshuf.d(<4 x i32> %a, i8 27)
|
2014-06-27 11:40:13 +00:00
|
|
|
%b.cast = bitcast <4 x i32> %b to <8 x i16>
|
|
|
|
%c = call <8 x i16> @llvm.x86.sse2.pshufh.w(<8 x i16> %b.cast, i8 -28)
|
|
|
|
%c.cast = bitcast <8 x i16> %c to <4 x i32>
|
2014-10-02 07:22:26 +00:00
|
|
|
%d = call <4 x i32> @llvm.x86.sse2.pshuf.d(<4 x i32> %c.cast, i8 27)
|
2014-06-27 11:40:13 +00:00
|
|
|
ret <4 x i32> %d
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x i32> @combine_pshufd4(<4 x i32> %a) {
|
2014-10-02 07:22:26 +00:00
|
|
|
; SSE-LABEL: combine_pshufd4:
|
|
|
|
; SSE: # BB#0: # %entry
|
|
|
|
; SSE-NEXT: pshufhw {{.*#+}} xmm0 = xmm0[0,1,2,3,7,6,5,4]
|
|
|
|
; SSE-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_pshufd4:
|
|
|
|
; AVX: # BB#0: # %entry
|
|
|
|
; AVX-NEXT: vpshufhw {{.*#+}} xmm0 = xmm0[0,1,2,3,7,6,5,4]
|
|
|
|
; AVX-NEXT: retq
|
|
|
|
entry:
|
|
|
|
%b = call <4 x i32> @llvm.x86.sse2.pshuf.d(<4 x i32> %a, i8 -31)
|
2014-06-27 11:40:13 +00:00
|
|
|
%b.cast = bitcast <4 x i32> %b to <8 x i16>
|
|
|
|
%c = call <8 x i16> @llvm.x86.sse2.pshufh.w(<8 x i16> %b.cast, i8 27)
|
|
|
|
%c.cast = bitcast <8 x i16> %c to <4 x i32>
|
2014-10-02 07:22:26 +00:00
|
|
|
%d = call <4 x i32> @llvm.x86.sse2.pshuf.d(<4 x i32> %c.cast, i8 -31)
|
2014-06-27 11:40:13 +00:00
|
|
|
ret <4 x i32> %d
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x i32> @combine_pshufd5(<4 x i32> %a) {
|
2014-10-02 07:22:26 +00:00
|
|
|
; SSE-LABEL: combine_pshufd5:
|
|
|
|
; SSE: # BB#0: # %entry
|
|
|
|
; SSE-NEXT: pshuflw {{.*#+}} xmm0 = xmm0[3,2,1,0,4,5,6,7]
|
|
|
|
; SSE-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_pshufd5:
|
|
|
|
; AVX: # BB#0: # %entry
|
|
|
|
; AVX-NEXT: vpshuflw {{.*#+}} xmm0 = xmm0[3,2,1,0,4,5,6,7]
|
|
|
|
; AVX-NEXT: retq
|
|
|
|
entry:
|
|
|
|
%b = call <4 x i32> @llvm.x86.sse2.pshuf.d(<4 x i32> %a, i8 -76)
|
2014-06-27 11:40:13 +00:00
|
|
|
%b.cast = bitcast <4 x i32> %b to <8 x i16>
|
|
|
|
%c = call <8 x i16> @llvm.x86.sse2.pshufl.w(<8 x i16> %b.cast, i8 27)
|
|
|
|
%c.cast = bitcast <8 x i16> %c to <4 x i32>
|
|
|
|
%d = call <4 x i32> @llvm.x86.sse2.pshuf.d(<4 x i32> %c.cast, i8 -76)
|
|
|
|
ret <4 x i32> %d
|
|
|
|
}
|
|
|
|
|
2014-07-02 15:09:44 +00:00
|
|
|
define <4 x i32> @combine_pshufd6(<4 x i32> %a) {
|
2014-10-02 07:22:26 +00:00
|
|
|
; SSE-LABEL: combine_pshufd6:
|
|
|
|
; SSE: # BB#0: # %entry
|
|
|
|
; SSE-NEXT: pshufd {{.*#+}} xmm0 = xmm0[0,0,0,0]
|
|
|
|
; SSE-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_pshufd6:
|
|
|
|
; AVX: # BB#0: # %entry
|
|
|
|
; AVX-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[0,0,0,0]
|
|
|
|
; AVX-NEXT: retq
|
|
|
|
entry:
|
2014-07-02 15:09:44 +00:00
|
|
|
%b = call <4 x i32> @llvm.x86.sse2.pshuf.d(<4 x i32> %a, i8 0)
|
|
|
|
%c = call <4 x i32> @llvm.x86.sse2.pshuf.d(<4 x i32> %b, i8 8)
|
|
|
|
ret <4 x i32> %c
|
|
|
|
}
|
|
|
|
|
2014-06-27 11:34:40 +00:00
|
|
|
define <8 x i16> @combine_pshuflw1(<8 x i16> %a) {
|
2014-10-02 07:22:26 +00:00
|
|
|
; ALL-LABEL: combine_pshuflw1:
|
|
|
|
; ALL: # BB#0: # %entry
|
|
|
|
; ALL-NEXT: retq
|
|
|
|
entry:
|
|
|
|
%b = call <8 x i16> @llvm.x86.sse2.pshufl.w(<8 x i16> %a, i8 27)
|
|
|
|
%c = call <8 x i16> @llvm.x86.sse2.pshufl.w(<8 x i16> %b, i8 27)
|
2014-06-27 11:34:40 +00:00
|
|
|
ret <8 x i16> %c
|
|
|
|
}
|
|
|
|
|
|
|
|
define <8 x i16> @combine_pshuflw2(<8 x i16> %a) {
|
2014-10-02 07:22:26 +00:00
|
|
|
; ALL-LABEL: combine_pshuflw2:
|
|
|
|
; ALL: # BB#0: # %entry
|
|
|
|
; ALL-NEXT: retq
|
|
|
|
entry:
|
2014-06-27 11:34:40 +00:00
|
|
|
%b = call <8 x i16> @llvm.x86.sse2.pshufl.w(<8 x i16> %a, i8 27)
|
2014-10-02 07:22:26 +00:00
|
|
|
%c = call <8 x i16> @llvm.x86.sse2.pshufh.w(<8 x i16> %b, i8 -28)
|
|
|
|
%d = call <8 x i16> @llvm.x86.sse2.pshufl.w(<8 x i16> %c, i8 27)
|
2014-06-27 11:34:40 +00:00
|
|
|
ret <8 x i16> %d
|
|
|
|
}
|
|
|
|
|
|
|
|
define <8 x i16> @combine_pshuflw3(<8 x i16> %a) {
|
2014-10-02 07:22:26 +00:00
|
|
|
; SSE-LABEL: combine_pshuflw3:
|
|
|
|
; SSE: # BB#0: # %entry
|
|
|
|
; SSE-NEXT: pshufhw {{.*#+}} xmm0 = xmm0[0,1,2,3,7,6,5,4]
|
|
|
|
; SSE-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_pshuflw3:
|
|
|
|
; AVX: # BB#0: # %entry
|
|
|
|
; AVX-NEXT: vpshufhw {{.*#+}} xmm0 = xmm0[0,1,2,3,7,6,5,4]
|
|
|
|
; AVX-NEXT: retq
|
|
|
|
entry:
|
2014-06-27 11:34:40 +00:00
|
|
|
%b = call <8 x i16> @llvm.x86.sse2.pshufl.w(<8 x i16> %a, i8 27)
|
2014-10-02 07:22:26 +00:00
|
|
|
%c = call <8 x i16> @llvm.x86.sse2.pshufh.w(<8 x i16> %b, i8 27)
|
|
|
|
%d = call <8 x i16> @llvm.x86.sse2.pshufl.w(<8 x i16> %c, i8 27)
|
2014-06-27 11:34:40 +00:00
|
|
|
ret <8 x i16> %d
|
|
|
|
}
|
|
|
|
|
|
|
|
define <8 x i16> @combine_pshufhw1(<8 x i16> %a) {
|
2014-10-02 07:22:26 +00:00
|
|
|
; SSE-LABEL: combine_pshufhw1:
|
|
|
|
; SSE: # BB#0: # %entry
|
|
|
|
; SSE-NEXT: pshuflw {{.*#+}} xmm0 = xmm0[3,2,1,0,4,5,6,7]
|
|
|
|
; SSE-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_pshufhw1:
|
|
|
|
; AVX: # BB#0: # %entry
|
|
|
|
; AVX-NEXT: vpshuflw {{.*#+}} xmm0 = xmm0[3,2,1,0,4,5,6,7]
|
|
|
|
; AVX-NEXT: retq
|
|
|
|
entry:
|
2014-06-27 11:34:40 +00:00
|
|
|
%b = call <8 x i16> @llvm.x86.sse2.pshufh.w(<8 x i16> %a, i8 27)
|
2014-10-02 07:22:26 +00:00
|
|
|
%c = call <8 x i16> @llvm.x86.sse2.pshufl.w(<8 x i16> %b, i8 27)
|
|
|
|
%d = call <8 x i16> @llvm.x86.sse2.pshufh.w(<8 x i16> %c, i8 27)
|
2014-06-27 11:34:40 +00:00
|
|
|
ret <8 x i16> %d
|
|
|
|
}
|
2014-10-02 07:30:24 +00:00
|
|
|
|
|
|
|
define <4 x i32> @combine_bitwise_ops_test1(<4 x i32> %a, <4 x i32> %b, <4 x i32> %c) {
|
|
|
|
; SSE-LABEL: combine_bitwise_ops_test1:
|
|
|
|
; SSE: # BB#0:
|
|
|
|
; SSE-NEXT: pand %xmm1, %xmm0
|
|
|
|
; SSE-NEXT: pshufd {{.*#+}} xmm0 = xmm0[0,2,1,3]
|
|
|
|
; SSE-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_bitwise_ops_test1:
|
|
|
|
; AVX: # BB#0:
|
|
|
|
; AVX-NEXT: vpand %xmm1, %xmm0, %xmm0
|
|
|
|
; AVX-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[0,2,1,3]
|
|
|
|
; AVX-NEXT: retq
|
|
|
|
%shuf1 = shufflevector <4 x i32> %a, <4 x i32> %c, <4 x i32><i32 0, i32 2, i32 1, i32 3>
|
|
|
|
%shuf2 = shufflevector <4 x i32> %b, <4 x i32> %c, <4 x i32><i32 0, i32 2, i32 1, i32 3>
|
|
|
|
%and = and <4 x i32> %shuf1, %shuf2
|
|
|
|
ret <4 x i32> %and
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x i32> @combine_bitwise_ops_test2(<4 x i32> %a, <4 x i32> %b, <4 x i32> %c) {
|
|
|
|
; SSE-LABEL: combine_bitwise_ops_test2:
|
|
|
|
; SSE: # BB#0:
|
|
|
|
; SSE-NEXT: por %xmm1, %xmm0
|
|
|
|
; SSE-NEXT: pshufd {{.*#+}} xmm0 = xmm0[0,2,1,3]
|
|
|
|
; SSE-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_bitwise_ops_test2:
|
|
|
|
; AVX: # BB#0:
|
|
|
|
; AVX-NEXT: vpor %xmm1, %xmm0, %xmm0
|
|
|
|
; AVX-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[0,2,1,3]
|
|
|
|
; AVX-NEXT: retq
|
|
|
|
%shuf1 = shufflevector <4 x i32> %a, <4 x i32> %c, <4 x i32><i32 0, i32 2, i32 1, i32 3>
|
|
|
|
%shuf2 = shufflevector <4 x i32> %b, <4 x i32> %c, <4 x i32><i32 0, i32 2, i32 1, i32 3>
|
|
|
|
%or = or <4 x i32> %shuf1, %shuf2
|
|
|
|
ret <4 x i32> %or
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x i32> @combine_bitwise_ops_test3(<4 x i32> %a, <4 x i32> %b, <4 x i32> %c) {
|
|
|
|
; SSE-LABEL: combine_bitwise_ops_test3:
|
|
|
|
; SSE: # BB#0:
|
|
|
|
; SSE-NEXT: pxor %xmm1, %xmm0
|
|
|
|
; SSE-NEXT: pshufd {{.*#+}} xmm0 = xmm0[0,2,1,3]
|
|
|
|
; SSE-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_bitwise_ops_test3:
|
|
|
|
; AVX: # BB#0:
|
|
|
|
; AVX-NEXT: vpxor %xmm1, %xmm0, %xmm0
|
|
|
|
; AVX-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[0,2,1,3]
|
|
|
|
; AVX-NEXT: retq
|
|
|
|
%shuf1 = shufflevector <4 x i32> %a, <4 x i32> %c, <4 x i32><i32 0, i32 2, i32 1, i32 3>
|
|
|
|
%shuf2 = shufflevector <4 x i32> %b, <4 x i32> %c, <4 x i32><i32 0, i32 2, i32 1, i32 3>
|
|
|
|
%xor = xor <4 x i32> %shuf1, %shuf2
|
|
|
|
ret <4 x i32> %xor
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x i32> @combine_bitwise_ops_test4(<4 x i32> %a, <4 x i32> %b, <4 x i32> %c) {
|
|
|
|
; SSE-LABEL: combine_bitwise_ops_test4:
|
|
|
|
; SSE: # BB#0:
|
|
|
|
; SSE-NEXT: pand %xmm1, %xmm0
|
|
|
|
; SSE-NEXT: pshufd {{.*#+}} xmm0 = xmm0[0,2,1,3]
|
|
|
|
; SSE-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_bitwise_ops_test4:
|
|
|
|
; AVX: # BB#0:
|
|
|
|
; AVX-NEXT: vpand %xmm1, %xmm0, %xmm0
|
|
|
|
; AVX-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[0,2,1,3]
|
|
|
|
; AVX-NEXT: retq
|
|
|
|
%shuf1 = shufflevector <4 x i32> %c, <4 x i32> %a, <4 x i32><i32 4, i32 6, i32 5, i32 7>
|
|
|
|
%shuf2 = shufflevector <4 x i32> %c, <4 x i32> %b, <4 x i32><i32 4, i32 6, i32 5, i32 7>
|
|
|
|
%and = and <4 x i32> %shuf1, %shuf2
|
|
|
|
ret <4 x i32> %and
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x i32> @combine_bitwise_ops_test5(<4 x i32> %a, <4 x i32> %b, <4 x i32> %c) {
|
|
|
|
; SSE-LABEL: combine_bitwise_ops_test5:
|
|
|
|
; SSE: # BB#0:
|
|
|
|
; SSE-NEXT: por %xmm1, %xmm0
|
|
|
|
; SSE-NEXT: pshufd {{.*#+}} xmm0 = xmm0[0,2,1,3]
|
|
|
|
; SSE-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_bitwise_ops_test5:
|
|
|
|
; AVX: # BB#0:
|
|
|
|
; AVX-NEXT: vpor %xmm1, %xmm0, %xmm0
|
|
|
|
; AVX-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[0,2,1,3]
|
|
|
|
; AVX-NEXT: retq
|
|
|
|
%shuf1 = shufflevector <4 x i32> %c, <4 x i32> %a, <4 x i32><i32 4, i32 6, i32 5, i32 7>
|
|
|
|
%shuf2 = shufflevector <4 x i32> %c, <4 x i32> %b, <4 x i32><i32 4, i32 6, i32 5, i32 7>
|
|
|
|
%or = or <4 x i32> %shuf1, %shuf2
|
|
|
|
ret <4 x i32> %or
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x i32> @combine_bitwise_ops_test6(<4 x i32> %a, <4 x i32> %b, <4 x i32> %c) {
|
|
|
|
; SSE-LABEL: combine_bitwise_ops_test6:
|
|
|
|
; SSE: # BB#0:
|
|
|
|
; SSE-NEXT: pxor %xmm1, %xmm0
|
|
|
|
; SSE-NEXT: pshufd {{.*#+}} xmm0 = xmm0[0,2,1,3]
|
|
|
|
; SSE-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_bitwise_ops_test6:
|
|
|
|
; AVX: # BB#0:
|
|
|
|
; AVX-NEXT: vpxor %xmm1, %xmm0, %xmm0
|
|
|
|
; AVX-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[0,2,1,3]
|
|
|
|
; AVX-NEXT: retq
|
|
|
|
%shuf1 = shufflevector <4 x i32> %c, <4 x i32> %a, <4 x i32><i32 4, i32 6, i32 5, i32 7>
|
|
|
|
%shuf2 = shufflevector <4 x i32> %c, <4 x i32> %b, <4 x i32><i32 4, i32 6, i32 5, i32 7>
|
|
|
|
%xor = xor <4 x i32> %shuf1, %shuf2
|
|
|
|
ret <4 x i32> %xor
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
; Verify that DAGCombiner moves the shuffle after the xor/and/or even if shuffles
|
|
|
|
; are not performing a swizzle operations.
|
|
|
|
|
|
|
|
define <4 x i32> @combine_bitwise_ops_test1b(<4 x i32> %a, <4 x i32> %b, <4 x i32> %c) {
|
|
|
|
; SSE2-LABEL: combine_bitwise_ops_test1b:
|
|
|
|
; SSE2: # BB#0:
|
2015-02-16 12:28:18 +00:00
|
|
|
; SSE2-NEXT: pand %xmm1, %xmm0
|
|
|
|
; SSE2-NEXT: pshufd {{.*#+}} xmm0 = xmm0[0,2,2,3]
|
|
|
|
; SSE2-NEXT: pshufd {{.*#+}} xmm1 = xmm2[1,3,2,3]
|
|
|
|
; SSE2-NEXT: punpckldq {{.*#+}} xmm0 = xmm0[0],xmm1[0],xmm0[1],xmm1[1]
|
2014-10-02 07:30:24 +00:00
|
|
|
; SSE2-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSSE3-LABEL: combine_bitwise_ops_test1b:
|
|
|
|
; SSSE3: # BB#0:
|
2015-02-16 12:28:18 +00:00
|
|
|
; SSSE3-NEXT: pand %xmm1, %xmm0
|
|
|
|
; SSSE3-NEXT: pshufd {{.*#+}} xmm0 = xmm0[0,2,2,3]
|
|
|
|
; SSSE3-NEXT: pshufd {{.*#+}} xmm1 = xmm2[1,3,2,3]
|
|
|
|
; SSSE3-NEXT: punpckldq {{.*#+}} xmm0 = xmm0[0],xmm1[0],xmm0[1],xmm1[1]
|
2014-10-02 07:30:24 +00:00
|
|
|
; SSSE3-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSE41-LABEL: combine_bitwise_ops_test1b:
|
|
|
|
; SSE41: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; SSE41-NEXT: pand %xmm1, %xmm0
|
|
|
|
; SSE41-NEXT: pblendw {{.*#+}} xmm0 = xmm0[0,1],xmm2[2,3],xmm0[4,5],xmm2[6,7]
|
2014-10-02 07:30:24 +00:00
|
|
|
; SSE41-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX1-LABEL: combine_bitwise_ops_test1b:
|
|
|
|
; AVX1: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; AVX1-NEXT: vpand %xmm1, %xmm0, %xmm0
|
|
|
|
; AVX1-NEXT: vpblendw {{.*#+}} xmm0 = xmm0[0,1],xmm2[2,3],xmm0[4,5],xmm2[6,7]
|
2014-10-02 07:30:24 +00:00
|
|
|
; AVX1-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX2-LABEL: combine_bitwise_ops_test1b:
|
|
|
|
; AVX2: # BB#0:
|
|
|
|
; AVX2-NEXT: vpand %xmm1, %xmm0, %xmm0
|
|
|
|
; AVX2-NEXT: vpblendd {{.*#+}} xmm0 = xmm0[0],xmm2[1],xmm0[2],xmm2[3]
|
|
|
|
; AVX2-NEXT: retq
|
|
|
|
%shuf1 = shufflevector <4 x i32> %a, <4 x i32> %c, <4 x i32><i32 0, i32 5, i32 2, i32 7>
|
|
|
|
%shuf2 = shufflevector <4 x i32> %b, <4 x i32> %c, <4 x i32><i32 0, i32 5, i32 2, i32 7>
|
|
|
|
%and = and <4 x i32> %shuf1, %shuf2
|
|
|
|
ret <4 x i32> %and
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x i32> @combine_bitwise_ops_test2b(<4 x i32> %a, <4 x i32> %b, <4 x i32> %c) {
|
|
|
|
; SSE2-LABEL: combine_bitwise_ops_test2b:
|
|
|
|
; SSE2: # BB#0:
|
2015-02-16 12:28:18 +00:00
|
|
|
; SSE2-NEXT: por %xmm1, %xmm0
|
|
|
|
; SSE2-NEXT: pshufd {{.*#+}} xmm0 = xmm0[0,2,2,3]
|
|
|
|
; SSE2-NEXT: pshufd {{.*#+}} xmm1 = xmm2[1,3,2,3]
|
|
|
|
; SSE2-NEXT: punpckldq {{.*#+}} xmm0 = xmm0[0],xmm1[0],xmm0[1],xmm1[1]
|
2014-10-02 07:30:24 +00:00
|
|
|
; SSE2-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSSE3-LABEL: combine_bitwise_ops_test2b:
|
|
|
|
; SSSE3: # BB#0:
|
2015-02-16 12:28:18 +00:00
|
|
|
; SSSE3-NEXT: por %xmm1, %xmm0
|
|
|
|
; SSSE3-NEXT: pshufd {{.*#+}} xmm0 = xmm0[0,2,2,3]
|
|
|
|
; SSSE3-NEXT: pshufd {{.*#+}} xmm1 = xmm2[1,3,2,3]
|
|
|
|
; SSSE3-NEXT: punpckldq {{.*#+}} xmm0 = xmm0[0],xmm1[0],xmm0[1],xmm1[1]
|
2014-10-02 07:30:24 +00:00
|
|
|
; SSSE3-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSE41-LABEL: combine_bitwise_ops_test2b:
|
|
|
|
; SSE41: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; SSE41-NEXT: por %xmm1, %xmm0
|
|
|
|
; SSE41-NEXT: pblendw {{.*#+}} xmm0 = xmm0[0,1],xmm2[2,3],xmm0[4,5],xmm2[6,7]
|
2014-10-02 07:30:24 +00:00
|
|
|
; SSE41-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX1-LABEL: combine_bitwise_ops_test2b:
|
|
|
|
; AVX1: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; AVX1-NEXT: vpor %xmm1, %xmm0, %xmm0
|
|
|
|
; AVX1-NEXT: vpblendw {{.*#+}} xmm0 = xmm0[0,1],xmm2[2,3],xmm0[4,5],xmm2[6,7]
|
2014-10-02 07:30:24 +00:00
|
|
|
; AVX1-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX2-LABEL: combine_bitwise_ops_test2b:
|
|
|
|
; AVX2: # BB#0:
|
|
|
|
; AVX2-NEXT: vpor %xmm1, %xmm0, %xmm0
|
|
|
|
; AVX2-NEXT: vpblendd {{.*#+}} xmm0 = xmm0[0],xmm2[1],xmm0[2],xmm2[3]
|
|
|
|
; AVX2-NEXT: retq
|
|
|
|
%shuf1 = shufflevector <4 x i32> %a, <4 x i32> %c, <4 x i32><i32 0, i32 5, i32 2, i32 7>
|
|
|
|
%shuf2 = shufflevector <4 x i32> %b, <4 x i32> %c, <4 x i32><i32 0, i32 5, i32 2, i32 7>
|
|
|
|
%or = or <4 x i32> %shuf1, %shuf2
|
|
|
|
ret <4 x i32> %or
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x i32> @combine_bitwise_ops_test3b(<4 x i32> %a, <4 x i32> %b, <4 x i32> %c) {
|
|
|
|
; SSE2-LABEL: combine_bitwise_ops_test3b:
|
|
|
|
; SSE2: # BB#0:
|
|
|
|
; SSE2-NEXT: xorps %xmm1, %xmm0
|
2015-02-04 09:06:05 +00:00
|
|
|
; SSE2-NEXT: andps {{.*}}(%rip), %xmm0
|
2014-10-02 07:30:24 +00:00
|
|
|
; SSE2-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSSE3-LABEL: combine_bitwise_ops_test3b:
|
|
|
|
; SSSE3: # BB#0:
|
|
|
|
; SSSE3-NEXT: xorps %xmm1, %xmm0
|
2015-02-04 09:06:05 +00:00
|
|
|
; SSSE3-NEXT: andps {{.*}}(%rip), %xmm0
|
2014-10-02 07:30:24 +00:00
|
|
|
; SSSE3-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSE41-LABEL: combine_bitwise_ops_test3b:
|
|
|
|
; SSE41: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; SSE41-NEXT: pxor %xmm1, %xmm0
|
|
|
|
; SSE41-NEXT: pxor %xmm1, %xmm1
|
2014-11-05 06:43:02 +00:00
|
|
|
; SSE41-NEXT: pblendw {{.*#+}} xmm0 = xmm0[0,1],xmm1[2,3],xmm0[4,5],xmm1[6,7]
|
2014-10-02 07:30:24 +00:00
|
|
|
; SSE41-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX1-LABEL: combine_bitwise_ops_test3b:
|
|
|
|
; AVX1: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; AVX1-NEXT: vpxor %xmm1, %xmm0, %xmm0
|
|
|
|
; AVX1-NEXT: vpxor %xmm1, %xmm1, %xmm1
|
|
|
|
; AVX1-NEXT: vpblendw {{.*#+}} xmm0 = xmm0[0,1],xmm1[2,3],xmm0[4,5],xmm1[6,7]
|
2014-10-02 07:30:24 +00:00
|
|
|
; AVX1-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX2-LABEL: combine_bitwise_ops_test3b:
|
|
|
|
; AVX2: # BB#0:
|
|
|
|
; AVX2-NEXT: vpxor %xmm1, %xmm0, %xmm0
|
|
|
|
; AVX2-NEXT: vpxor %xmm1, %xmm1, %xmm1
|
|
|
|
; AVX2-NEXT: vpblendd {{.*#+}} xmm0 = xmm0[0],xmm1[1],xmm0[2],xmm1[3]
|
|
|
|
; AVX2-NEXT: retq
|
|
|
|
%shuf1 = shufflevector <4 x i32> %a, <4 x i32> %c, <4 x i32><i32 0, i32 5, i32 2, i32 7>
|
|
|
|
%shuf2 = shufflevector <4 x i32> %b, <4 x i32> %c, <4 x i32><i32 0, i32 5, i32 2, i32 7>
|
|
|
|
%xor = xor <4 x i32> %shuf1, %shuf2
|
|
|
|
ret <4 x i32> %xor
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x i32> @combine_bitwise_ops_test4b(<4 x i32> %a, <4 x i32> %b, <4 x i32> %c) {
|
|
|
|
; SSE2-LABEL: combine_bitwise_ops_test4b:
|
|
|
|
; SSE2: # BB#0:
|
2015-02-16 12:28:18 +00:00
|
|
|
; SSE2-NEXT: pand %xmm1, %xmm0
|
|
|
|
; SSE2-NEXT: pshufd {{.*#+}} xmm1 = xmm0[1,3,2,3]
|
|
|
|
; SSE2-NEXT: pshufd {{.*#+}} xmm0 = xmm2[0,2,2,3]
|
|
|
|
; SSE2-NEXT: punpckldq {{.*#+}} xmm0 = xmm0[0],xmm1[0],xmm0[1],xmm1[1]
|
2014-10-02 07:30:24 +00:00
|
|
|
; SSE2-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSSE3-LABEL: combine_bitwise_ops_test4b:
|
|
|
|
; SSSE3: # BB#0:
|
2015-02-16 12:28:18 +00:00
|
|
|
; SSSE3-NEXT: pand %xmm1, %xmm0
|
|
|
|
; SSSE3-NEXT: pshufd {{.*#+}} xmm1 = xmm0[1,3,2,3]
|
|
|
|
; SSSE3-NEXT: pshufd {{.*#+}} xmm0 = xmm2[0,2,2,3]
|
|
|
|
; SSSE3-NEXT: punpckldq {{.*#+}} xmm0 = xmm0[0],xmm1[0],xmm0[1],xmm1[1]
|
2014-10-02 07:30:24 +00:00
|
|
|
; SSSE3-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSE41-LABEL: combine_bitwise_ops_test4b:
|
|
|
|
; SSE41: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; SSE41-NEXT: pand %xmm1, %xmm0
|
2014-11-04 23:25:08 +00:00
|
|
|
; SSE41-NEXT: pblendw {{.*#+}} xmm0 = xmm2[0,1],xmm0[2,3],xmm2[4,5],xmm0[6,7]
|
2014-10-02 07:30:24 +00:00
|
|
|
; SSE41-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX1-LABEL: combine_bitwise_ops_test4b:
|
|
|
|
; AVX1: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; AVX1-NEXT: vpand %xmm1, %xmm0, %xmm0
|
|
|
|
; AVX1-NEXT: vpblendw {{.*#+}} xmm0 = xmm2[0,1],xmm0[2,3],xmm2[4,5],xmm0[6,7]
|
2014-10-02 07:30:24 +00:00
|
|
|
; AVX1-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX2-LABEL: combine_bitwise_ops_test4b:
|
|
|
|
; AVX2: # BB#0:
|
|
|
|
; AVX2-NEXT: vpand %xmm1, %xmm0, %xmm0
|
|
|
|
; AVX2-NEXT: vpblendd {{.*#+}} xmm0 = xmm2[0],xmm0[1],xmm2[2],xmm0[3]
|
|
|
|
; AVX2-NEXT: retq
|
|
|
|
%shuf1 = shufflevector <4 x i32> %c, <4 x i32> %a, <4 x i32><i32 0, i32 5, i32 2, i32 7>
|
|
|
|
%shuf2 = shufflevector <4 x i32> %c, <4 x i32> %b, <4 x i32><i32 0, i32 5, i32 2, i32 7>
|
|
|
|
%and = and <4 x i32> %shuf1, %shuf2
|
|
|
|
ret <4 x i32> %and
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x i32> @combine_bitwise_ops_test5b(<4 x i32> %a, <4 x i32> %b, <4 x i32> %c) {
|
|
|
|
; SSE2-LABEL: combine_bitwise_ops_test5b:
|
|
|
|
; SSE2: # BB#0:
|
2015-02-16 12:28:18 +00:00
|
|
|
; SSE2-NEXT: por %xmm1, %xmm0
|
|
|
|
; SSE2-NEXT: pshufd {{.*#+}} xmm1 = xmm0[1,3,2,3]
|
|
|
|
; SSE2-NEXT: pshufd {{.*#+}} xmm0 = xmm2[0,2,2,3]
|
|
|
|
; SSE2-NEXT: punpckldq {{.*#+}} xmm0 = xmm0[0],xmm1[0],xmm0[1],xmm1[1]
|
2014-10-02 07:30:24 +00:00
|
|
|
; SSE2-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSSE3-LABEL: combine_bitwise_ops_test5b:
|
|
|
|
; SSSE3: # BB#0:
|
2015-02-16 12:28:18 +00:00
|
|
|
; SSSE3-NEXT: por %xmm1, %xmm0
|
|
|
|
; SSSE3-NEXT: pshufd {{.*#+}} xmm1 = xmm0[1,3,2,3]
|
|
|
|
; SSSE3-NEXT: pshufd {{.*#+}} xmm0 = xmm2[0,2,2,3]
|
|
|
|
; SSSE3-NEXT: punpckldq {{.*#+}} xmm0 = xmm0[0],xmm1[0],xmm0[1],xmm1[1]
|
2014-10-02 07:30:24 +00:00
|
|
|
; SSSE3-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSE41-LABEL: combine_bitwise_ops_test5b:
|
|
|
|
; SSE41: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; SSE41-NEXT: por %xmm1, %xmm0
|
2014-11-04 23:25:08 +00:00
|
|
|
; SSE41-NEXT: pblendw {{.*#+}} xmm0 = xmm2[0,1],xmm0[2,3],xmm2[4,5],xmm0[6,7]
|
2014-10-02 07:30:24 +00:00
|
|
|
; SSE41-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX1-LABEL: combine_bitwise_ops_test5b:
|
|
|
|
; AVX1: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; AVX1-NEXT: vpor %xmm1, %xmm0, %xmm0
|
|
|
|
; AVX1-NEXT: vpblendw {{.*#+}} xmm0 = xmm2[0,1],xmm0[2,3],xmm2[4,5],xmm0[6,7]
|
2014-10-02 07:30:24 +00:00
|
|
|
; AVX1-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX2-LABEL: combine_bitwise_ops_test5b:
|
|
|
|
; AVX2: # BB#0:
|
|
|
|
; AVX2-NEXT: vpor %xmm1, %xmm0, %xmm0
|
|
|
|
; AVX2-NEXT: vpblendd {{.*#+}} xmm0 = xmm2[0],xmm0[1],xmm2[2],xmm0[3]
|
|
|
|
; AVX2-NEXT: retq
|
|
|
|
%shuf1 = shufflevector <4 x i32> %c, <4 x i32> %a, <4 x i32><i32 0, i32 5, i32 2, i32 7>
|
|
|
|
%shuf2 = shufflevector <4 x i32> %c, <4 x i32> %b, <4 x i32><i32 0, i32 5, i32 2, i32 7>
|
|
|
|
%or = or <4 x i32> %shuf1, %shuf2
|
|
|
|
ret <4 x i32> %or
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x i32> @combine_bitwise_ops_test6b(<4 x i32> %a, <4 x i32> %b, <4 x i32> %c) {
|
|
|
|
; SSE2-LABEL: combine_bitwise_ops_test6b:
|
|
|
|
; SSE2: # BB#0:
|
|
|
|
; SSE2-NEXT: xorps %xmm1, %xmm0
|
2015-02-04 09:06:05 +00:00
|
|
|
; SSE2-NEXT: andps {{.*}}(%rip), %xmm0
|
2014-10-02 07:30:24 +00:00
|
|
|
; SSE2-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSSE3-LABEL: combine_bitwise_ops_test6b:
|
|
|
|
; SSSE3: # BB#0:
|
|
|
|
; SSSE3-NEXT: xorps %xmm1, %xmm0
|
2015-02-04 09:06:05 +00:00
|
|
|
; SSSE3-NEXT: andps {{.*}}(%rip), %xmm0
|
2014-10-02 07:30:24 +00:00
|
|
|
; SSSE3-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSE41-LABEL: combine_bitwise_ops_test6b:
|
|
|
|
; SSE41: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; SSE41-NEXT: pxor %xmm1, %xmm0
|
|
|
|
; SSE41-NEXT: pxor %xmm1, %xmm1
|
2014-11-05 06:43:02 +00:00
|
|
|
; SSE41-NEXT: pblendw {{.*#+}} xmm0 = xmm1[0,1],xmm0[2,3],xmm1[4,5],xmm0[6,7]
|
2014-10-02 07:30:24 +00:00
|
|
|
; SSE41-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX1-LABEL: combine_bitwise_ops_test6b:
|
|
|
|
; AVX1: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; AVX1-NEXT: vpxor %xmm1, %xmm0, %xmm0
|
|
|
|
; AVX1-NEXT: vpxor %xmm1, %xmm1, %xmm1
|
|
|
|
; AVX1-NEXT: vpblendw {{.*#+}} xmm0 = xmm1[0,1],xmm0[2,3],xmm1[4,5],xmm0[6,7]
|
2014-10-02 07:30:24 +00:00
|
|
|
; AVX1-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX2-LABEL: combine_bitwise_ops_test6b:
|
|
|
|
; AVX2: # BB#0:
|
|
|
|
; AVX2-NEXT: vpxor %xmm1, %xmm0, %xmm0
|
|
|
|
; AVX2-NEXT: vpxor %xmm1, %xmm1, %xmm1
|
|
|
|
; AVX2-NEXT: vpblendd {{.*#+}} xmm0 = xmm1[0],xmm0[1],xmm1[2],xmm0[3]
|
|
|
|
; AVX2-NEXT: retq
|
|
|
|
%shuf1 = shufflevector <4 x i32> %c, <4 x i32> %a, <4 x i32><i32 0, i32 5, i32 2, i32 7>
|
|
|
|
%shuf2 = shufflevector <4 x i32> %c, <4 x i32> %b, <4 x i32><i32 0, i32 5, i32 2, i32 7>
|
|
|
|
%xor = xor <4 x i32> %shuf1, %shuf2
|
|
|
|
ret <4 x i32> %xor
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x i32> @combine_bitwise_ops_test1c(<4 x i32> %a, <4 x i32> %b, <4 x i32> %c) {
|
2015-02-16 01:52:02 +00:00
|
|
|
; SSE2-LABEL: combine_bitwise_ops_test1c:
|
|
|
|
; SSE2: # BB#0:
|
|
|
|
; SSE2-NEXT: andps %xmm1, %xmm0
|
|
|
|
; SSE2-NEXT: shufps {{.*#+}} xmm0 = xmm0[0,2],xmm2[1,3]
|
|
|
|
; SSE2-NEXT: retq
|
2014-10-02 07:30:24 +00:00
|
|
|
;
|
2015-02-16 01:52:02 +00:00
|
|
|
; SSSE3-LABEL: combine_bitwise_ops_test1c:
|
|
|
|
; SSSE3: # BB#0:
|
|
|
|
; SSSE3-NEXT: andps %xmm1, %xmm0
|
|
|
|
; SSSE3-NEXT: shufps {{.*#+}} xmm0 = xmm0[0,2],xmm2[1,3]
|
|
|
|
; SSSE3-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSE41-LABEL: combine_bitwise_ops_test1c:
|
|
|
|
; SSE41: # BB#0:
|
|
|
|
; SSE41-NEXT: pand %xmm1, %xmm0
|
|
|
|
; SSE41-NEXT: pblendw {{.*#+}} xmm0 = xmm0[0,1],xmm2[2,3],xmm0[4,5],xmm2[6,7]
|
|
|
|
; SSE41-NEXT: pshufd {{.*#+}} xmm0 = xmm0[0,2,1,3]
|
|
|
|
; SSE41-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX1-LABEL: combine_bitwise_ops_test1c:
|
|
|
|
; AVX1: # BB#0:
|
|
|
|
; AVX1-NEXT: vpand %xmm1, %xmm0, %xmm0
|
|
|
|
; AVX1-NEXT: vpblendw {{.*#+}} xmm0 = xmm0[0,1],xmm2[2,3],xmm0[4,5],xmm2[6,7]
|
|
|
|
; AVX1-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[0,2,1,3]
|
|
|
|
; AVX1-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX2-LABEL: combine_bitwise_ops_test1c:
|
|
|
|
; AVX2: # BB#0:
|
|
|
|
; AVX2-NEXT: vpand %xmm1, %xmm0, %xmm0
|
|
|
|
; AVX2-NEXT: vpblendd {{.*#+}} xmm0 = xmm0[0],xmm2[1],xmm0[2],xmm2[3]
|
|
|
|
; AVX2-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[0,2,1,3]
|
|
|
|
; AVX2-NEXT: retq
|
2014-10-02 07:30:24 +00:00
|
|
|
%shuf1 = shufflevector <4 x i32> %a, <4 x i32> %c, <4 x i32><i32 0, i32 2, i32 5, i32 7>
|
|
|
|
%shuf2 = shufflevector <4 x i32> %b, <4 x i32> %c, <4 x i32><i32 0, i32 2, i32 5, i32 7>
|
|
|
|
%and = and <4 x i32> %shuf1, %shuf2
|
|
|
|
ret <4 x i32> %and
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x i32> @combine_bitwise_ops_test2c(<4 x i32> %a, <4 x i32> %b, <4 x i32> %c) {
|
2015-02-16 01:52:02 +00:00
|
|
|
; SSE2-LABEL: combine_bitwise_ops_test2c:
|
|
|
|
; SSE2: # BB#0:
|
|
|
|
; SSE2-NEXT: orps %xmm1, %xmm0
|
|
|
|
; SSE2-NEXT: shufps {{.*#+}} xmm0 = xmm0[0,2],xmm2[1,3]
|
|
|
|
; SSE2-NEXT: retq
|
2014-10-02 07:30:24 +00:00
|
|
|
;
|
2015-02-16 01:52:02 +00:00
|
|
|
; SSSE3-LABEL: combine_bitwise_ops_test2c:
|
|
|
|
; SSSE3: # BB#0:
|
|
|
|
; SSSE3-NEXT: orps %xmm1, %xmm0
|
|
|
|
; SSSE3-NEXT: shufps {{.*#+}} xmm0 = xmm0[0,2],xmm2[1,3]
|
|
|
|
; SSSE3-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSE41-LABEL: combine_bitwise_ops_test2c:
|
|
|
|
; SSE41: # BB#0:
|
|
|
|
; SSE41-NEXT: por %xmm1, %xmm0
|
|
|
|
; SSE41-NEXT: pblendw {{.*#+}} xmm0 = xmm0[0,1],xmm2[2,3],xmm0[4,5],xmm2[6,7]
|
|
|
|
; SSE41-NEXT: pshufd {{.*#+}} xmm0 = xmm0[0,2,1,3]
|
|
|
|
; SSE41-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX1-LABEL: combine_bitwise_ops_test2c:
|
|
|
|
; AVX1: # BB#0:
|
|
|
|
; AVX1-NEXT: vpor %xmm1, %xmm0, %xmm0
|
|
|
|
; AVX1-NEXT: vpblendw {{.*#+}} xmm0 = xmm0[0,1],xmm2[2,3],xmm0[4,5],xmm2[6,7]
|
|
|
|
; AVX1-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[0,2,1,3]
|
|
|
|
; AVX1-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX2-LABEL: combine_bitwise_ops_test2c:
|
|
|
|
; AVX2: # BB#0:
|
|
|
|
; AVX2-NEXT: vpor %xmm1, %xmm0, %xmm0
|
|
|
|
; AVX2-NEXT: vpblendd {{.*#+}} xmm0 = xmm0[0],xmm2[1],xmm0[2],xmm2[3]
|
|
|
|
; AVX2-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[0,2,1,3]
|
|
|
|
; AVX2-NEXT: retq
|
2014-10-02 07:30:24 +00:00
|
|
|
%shuf1 = shufflevector <4 x i32> %a, <4 x i32> %c, <4 x i32><i32 0, i32 2, i32 5, i32 7>
|
|
|
|
%shuf2 = shufflevector <4 x i32> %b, <4 x i32> %c, <4 x i32><i32 0, i32 2, i32 5, i32 7>
|
|
|
|
%or = or <4 x i32> %shuf1, %shuf2
|
|
|
|
ret <4 x i32> %or
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x i32> @combine_bitwise_ops_test3c(<4 x i32> %a, <4 x i32> %b, <4 x i32> %c) {
|
2015-01-10 19:45:33 +00:00
|
|
|
; SSE2-LABEL: combine_bitwise_ops_test3c:
|
2015-02-04 00:58:42 +00:00
|
|
|
; SSE2: # BB#0:
|
|
|
|
; SSE2-NEXT: xorps %xmm1, %xmm0
|
|
|
|
; SSE2-NEXT: xorps %xmm1, %xmm1
|
2015-02-15 12:18:12 +00:00
|
|
|
; SSE2-NEXT: shufps {{.*#+}} xmm0 = xmm0[0,2],xmm1[2,3]
|
2015-02-04 00:58:42 +00:00
|
|
|
; SSE2-NEXT: retq
|
2015-01-10 19:45:33 +00:00
|
|
|
;
|
|
|
|
; SSSE3-LABEL: combine_bitwise_ops_test3c:
|
2015-02-04 00:58:42 +00:00
|
|
|
; SSSE3: # BB#0:
|
|
|
|
; SSSE3-NEXT: xorps %xmm1, %xmm0
|
|
|
|
; SSSE3-NEXT: xorps %xmm1, %xmm1
|
2015-02-15 12:18:12 +00:00
|
|
|
; SSSE3-NEXT: shufps {{.*#+}} xmm0 = xmm0[0,2],xmm1[2,3]
|
2015-02-04 00:58:42 +00:00
|
|
|
; SSSE3-NEXT: retq
|
2015-01-10 19:45:33 +00:00
|
|
|
;
|
|
|
|
; SSE41-LABEL: combine_bitwise_ops_test3c:
|
2015-02-04 00:58:42 +00:00
|
|
|
; SSE41: # BB#0:
|
2015-02-16 01:52:02 +00:00
|
|
|
; SSE41-NEXT: pxor %xmm1, %xmm0
|
|
|
|
; SSE41-NEXT: pshufd {{.*#+}} xmm0 = xmm0[0,2,2,3]
|
|
|
|
; SSE41-NEXT: movq {{.*#+}} xmm0 = xmm0[0],zero
|
2015-02-04 00:58:42 +00:00
|
|
|
; SSE41-NEXT: retq
|
2014-10-02 07:30:24 +00:00
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_bitwise_ops_test3c:
|
|
|
|
; AVX: # BB#0:
|
2015-02-16 01:52:02 +00:00
|
|
|
; AVX-NEXT: vpxor %xmm1, %xmm0, %xmm0
|
|
|
|
; AVX-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[0,2,2,3]
|
|
|
|
; AVX-NEXT: vmovq {{.*#+}} xmm0 = xmm0[0],zero
|
2014-10-02 07:30:24 +00:00
|
|
|
; AVX-NEXT: retq
|
|
|
|
%shuf1 = shufflevector <4 x i32> %a, <4 x i32> %c, <4 x i32><i32 0, i32 2, i32 5, i32 7>
|
|
|
|
%shuf2 = shufflevector <4 x i32> %b, <4 x i32> %c, <4 x i32><i32 0, i32 2, i32 5, i32 7>
|
|
|
|
%xor = xor <4 x i32> %shuf1, %shuf2
|
|
|
|
ret <4 x i32> %xor
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x i32> @combine_bitwise_ops_test4c(<4 x i32> %a, <4 x i32> %b, <4 x i32> %c) {
|
2015-02-16 01:52:02 +00:00
|
|
|
; SSE2-LABEL: combine_bitwise_ops_test4c:
|
|
|
|
; SSE2: # BB#0:
|
|
|
|
; SSE2-NEXT: andps %xmm1, %xmm0
|
|
|
|
; SSE2-NEXT: shufps {{.*#+}} xmm2 = xmm2[0,2],xmm0[1,3]
|
|
|
|
; SSE2-NEXT: movaps %xmm2, %xmm0
|
|
|
|
; SSE2-NEXT: retq
|
2014-10-02 07:30:24 +00:00
|
|
|
;
|
2015-02-16 01:52:02 +00:00
|
|
|
; SSSE3-LABEL: combine_bitwise_ops_test4c:
|
|
|
|
; SSSE3: # BB#0:
|
|
|
|
; SSSE3-NEXT: andps %xmm1, %xmm0
|
|
|
|
; SSSE3-NEXT: shufps {{.*#+}} xmm2 = xmm2[0,2],xmm0[1,3]
|
|
|
|
; SSSE3-NEXT: movaps %xmm2, %xmm0
|
|
|
|
; SSSE3-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSE41-LABEL: combine_bitwise_ops_test4c:
|
|
|
|
; SSE41: # BB#0:
|
|
|
|
; SSE41-NEXT: pand %xmm1, %xmm0
|
|
|
|
; SSE41-NEXT: pblendw {{.*#+}} xmm0 = xmm2[0,1],xmm0[2,3],xmm2[4,5],xmm0[6,7]
|
|
|
|
; SSE41-NEXT: pshufd {{.*#+}} xmm0 = xmm0[0,2,1,3]
|
|
|
|
; SSE41-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX1-LABEL: combine_bitwise_ops_test4c:
|
|
|
|
; AVX1: # BB#0:
|
|
|
|
; AVX1-NEXT: vpand %xmm1, %xmm0, %xmm0
|
|
|
|
; AVX1-NEXT: vpblendw {{.*#+}} xmm0 = xmm2[0,1],xmm0[2,3],xmm2[4,5],xmm0[6,7]
|
|
|
|
; AVX1-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[0,2,1,3]
|
|
|
|
; AVX1-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX2-LABEL: combine_bitwise_ops_test4c:
|
|
|
|
; AVX2: # BB#0:
|
|
|
|
; AVX2-NEXT: vpand %xmm1, %xmm0, %xmm0
|
|
|
|
; AVX2-NEXT: vpblendd {{.*#+}} xmm0 = xmm2[0],xmm0[1],xmm2[2],xmm0[3]
|
|
|
|
; AVX2-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[0,2,1,3]
|
|
|
|
; AVX2-NEXT: retq
|
2014-10-02 07:30:24 +00:00
|
|
|
%shuf1 = shufflevector <4 x i32> %c, <4 x i32> %a, <4 x i32><i32 0, i32 2, i32 5, i32 7>
|
|
|
|
%shuf2 = shufflevector <4 x i32> %c, <4 x i32> %b, <4 x i32><i32 0, i32 2, i32 5, i32 7>
|
|
|
|
%and = and <4 x i32> %shuf1, %shuf2
|
|
|
|
ret <4 x i32> %and
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x i32> @combine_bitwise_ops_test5c(<4 x i32> %a, <4 x i32> %b, <4 x i32> %c) {
|
2015-02-16 01:52:02 +00:00
|
|
|
; SSE2-LABEL: combine_bitwise_ops_test5c:
|
|
|
|
; SSE2: # BB#0:
|
|
|
|
; SSE2-NEXT: orps %xmm1, %xmm0
|
|
|
|
; SSE2-NEXT: shufps {{.*#+}} xmm2 = xmm2[0,2],xmm0[1,3]
|
|
|
|
; SSE2-NEXT: movaps %xmm2, %xmm0
|
|
|
|
; SSE2-NEXT: retq
|
2014-10-02 07:30:24 +00:00
|
|
|
;
|
2015-02-16 01:52:02 +00:00
|
|
|
; SSSE3-LABEL: combine_bitwise_ops_test5c:
|
|
|
|
; SSSE3: # BB#0:
|
|
|
|
; SSSE3-NEXT: orps %xmm1, %xmm0
|
|
|
|
; SSSE3-NEXT: shufps {{.*#+}} xmm2 = xmm2[0,2],xmm0[1,3]
|
|
|
|
; SSSE3-NEXT: movaps %xmm2, %xmm0
|
|
|
|
; SSSE3-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSE41-LABEL: combine_bitwise_ops_test5c:
|
|
|
|
; SSE41: # BB#0:
|
|
|
|
; SSE41-NEXT: por %xmm1, %xmm0
|
|
|
|
; SSE41-NEXT: pblendw {{.*#+}} xmm0 = xmm2[0,1],xmm0[2,3],xmm2[4,5],xmm0[6,7]
|
|
|
|
; SSE41-NEXT: pshufd {{.*#+}} xmm0 = xmm0[0,2,1,3]
|
|
|
|
; SSE41-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX1-LABEL: combine_bitwise_ops_test5c:
|
|
|
|
; AVX1: # BB#0:
|
|
|
|
; AVX1-NEXT: vpor %xmm1, %xmm0, %xmm0
|
|
|
|
; AVX1-NEXT: vpblendw {{.*#+}} xmm0 = xmm2[0,1],xmm0[2,3],xmm2[4,5],xmm0[6,7]
|
|
|
|
; AVX1-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[0,2,1,3]
|
|
|
|
; AVX1-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX2-LABEL: combine_bitwise_ops_test5c:
|
|
|
|
; AVX2: # BB#0:
|
|
|
|
; AVX2-NEXT: vpor %xmm1, %xmm0, %xmm0
|
|
|
|
; AVX2-NEXT: vpblendd {{.*#+}} xmm0 = xmm2[0],xmm0[1],xmm2[2],xmm0[3]
|
|
|
|
; AVX2-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[0,2,1,3]
|
|
|
|
; AVX2-NEXT: retq
|
2014-10-02 07:30:24 +00:00
|
|
|
%shuf1 = shufflevector <4 x i32> %c, <4 x i32> %a, <4 x i32><i32 0, i32 2, i32 5, i32 7>
|
|
|
|
%shuf2 = shufflevector <4 x i32> %c, <4 x i32> %b, <4 x i32><i32 0, i32 2, i32 5, i32 7>
|
|
|
|
%or = or <4 x i32> %shuf1, %shuf2
|
|
|
|
ret <4 x i32> %or
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x i32> @combine_bitwise_ops_test6c(<4 x i32> %a, <4 x i32> %b, <4 x i32> %c) {
|
2015-02-16 01:52:02 +00:00
|
|
|
; SSE2-LABEL: combine_bitwise_ops_test6c:
|
|
|
|
; SSE2: # BB#0:
|
|
|
|
; SSE2-NEXT: xorps %xmm1, %xmm0
|
|
|
|
; SSE2-NEXT: xorps %xmm1, %xmm1
|
|
|
|
; SSE2-NEXT: shufps {{.*#+}} xmm1 = xmm1[0,1],xmm0[1,3]
|
|
|
|
; SSE2-NEXT: movaps %xmm1, %xmm0
|
|
|
|
; SSE2-NEXT: retq
|
2014-10-02 07:30:24 +00:00
|
|
|
;
|
2015-02-16 01:52:02 +00:00
|
|
|
; SSSE3-LABEL: combine_bitwise_ops_test6c:
|
|
|
|
; SSSE3: # BB#0:
|
|
|
|
; SSSE3-NEXT: xorps %xmm1, %xmm0
|
|
|
|
; SSSE3-NEXT: xorps %xmm1, %xmm1
|
|
|
|
; SSSE3-NEXT: shufps {{.*#+}} xmm1 = xmm1[0,1],xmm0[1,3]
|
|
|
|
; SSSE3-NEXT: movaps %xmm1, %xmm0
|
|
|
|
; SSSE3-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSE41-LABEL: combine_bitwise_ops_test6c:
|
|
|
|
; SSE41: # BB#0:
|
|
|
|
; SSE41-NEXT: pxor %xmm1, %xmm0
|
|
|
|
; SSE41-NEXT: pshufd {{.*#+}} xmm1 = xmm0[0,1,1,3]
|
|
|
|
; SSE41-NEXT: pxor %xmm0, %xmm0
|
|
|
|
; SSE41-NEXT: pblendw {{.*#+}} xmm0 = xmm0[0,1,2,3],xmm1[4,5,6,7]
|
|
|
|
; SSE41-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX1-LABEL: combine_bitwise_ops_test6c:
|
|
|
|
; AVX1: # BB#0:
|
|
|
|
; AVX1-NEXT: vpxor %xmm1, %xmm0, %xmm0
|
|
|
|
; AVX1-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[0,1,1,3]
|
|
|
|
; AVX1-NEXT: vpxor %xmm1, %xmm1, %xmm1
|
|
|
|
; AVX1-NEXT: vpblendw {{.*#+}} xmm0 = xmm1[0,1,2,3],xmm0[4,5,6,7]
|
|
|
|
; AVX1-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX2-LABEL: combine_bitwise_ops_test6c:
|
|
|
|
; AVX2: # BB#0:
|
|
|
|
; AVX2-NEXT: vpxor %xmm1, %xmm0, %xmm0
|
|
|
|
; AVX2-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[0,1,1,3]
|
|
|
|
; AVX2-NEXT: vpxor %xmm1, %xmm1, %xmm1
|
|
|
|
; AVX2-NEXT: vpblendd {{.*#+}} xmm0 = xmm1[0,1],xmm0[2,3]
|
|
|
|
; AVX2-NEXT: retq
|
2014-10-02 07:30:24 +00:00
|
|
|
%shuf1 = shufflevector <4 x i32> %c, <4 x i32> %a, <4 x i32><i32 0, i32 2, i32 5, i32 7>
|
|
|
|
%shuf2 = shufflevector <4 x i32> %c, <4 x i32> %b, <4 x i32><i32 0, i32 2, i32 5, i32 7>
|
|
|
|
%xor = xor <4 x i32> %shuf1, %shuf2
|
|
|
|
ret <4 x i32> %xor
|
|
|
|
}
|
2014-10-02 07:42:58 +00:00
|
|
|
|
|
|
|
define <4 x i32> @combine_nested_undef_test1(<4 x i32> %A, <4 x i32> %B) {
|
|
|
|
; SSE-LABEL: combine_nested_undef_test1:
|
|
|
|
; SSE: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; SSE-NEXT: pshufd {{.*#+}} xmm0 = xmm0[3,1,0,1]
|
2014-10-02 07:42:58 +00:00
|
|
|
; SSE-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_nested_undef_test1:
|
|
|
|
; AVX: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; AVX-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[3,1,0,1]
|
2014-10-02 07:42:58 +00:00
|
|
|
; AVX-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x i32> %A, <4 x i32> %B, <4 x i32> <i32 0, i32 4, i32 3, i32 1>
|
|
|
|
%2 = shufflevector <4 x i32> %1, <4 x i32> undef, <4 x i32> <i32 2, i32 4, i32 0, i32 3>
|
|
|
|
ret <4 x i32> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x i32> @combine_nested_undef_test2(<4 x i32> %A, <4 x i32> %B) {
|
|
|
|
; SSE-LABEL: combine_nested_undef_test2:
|
|
|
|
; SSE: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; SSE-NEXT: pshufd {{.*#+}} xmm0 = xmm0[2,1,0,3]
|
2014-10-02 07:42:58 +00:00
|
|
|
; SSE-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_nested_undef_test2:
|
|
|
|
; AVX: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; AVX-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[2,1,0,3]
|
2014-10-02 07:42:58 +00:00
|
|
|
; AVX-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x i32> %A, <4 x i32> %B, <4 x i32> <i32 0, i32 5, i32 2, i32 3>
|
|
|
|
%2 = shufflevector <4 x i32> %1, <4 x i32> undef, <4 x i32> <i32 2, i32 4, i32 0, i32 3>
|
|
|
|
ret <4 x i32> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x i32> @combine_nested_undef_test3(<4 x i32> %A, <4 x i32> %B) {
|
|
|
|
; SSE-LABEL: combine_nested_undef_test3:
|
|
|
|
; SSE: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; SSE-NEXT: pshufd {{.*#+}} xmm0 = xmm0[2,1,0,3]
|
2014-10-02 07:42:58 +00:00
|
|
|
; SSE-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_nested_undef_test3:
|
|
|
|
; AVX: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; AVX-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[2,1,0,3]
|
2014-10-02 07:42:58 +00:00
|
|
|
; AVX-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x i32> %A, <4 x i32> %B, <4 x i32> <i32 0, i32 6, i32 2, i32 3>
|
|
|
|
%2 = shufflevector <4 x i32> %1, <4 x i32> undef, <4 x i32> <i32 2, i32 4, i32 0, i32 3>
|
|
|
|
ret <4 x i32> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x i32> @combine_nested_undef_test4(<4 x i32> %A, <4 x i32> %B) {
|
|
|
|
; SSE-LABEL: combine_nested_undef_test4:
|
|
|
|
; SSE: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; SSE-NEXT: pshufd {{.*#+}} xmm0 = xmm0[0,1,0,1]
|
2014-10-02 07:42:58 +00:00
|
|
|
; SSE-NEXT: retq
|
|
|
|
;
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; AVX1-LABEL: combine_nested_undef_test4:
|
|
|
|
; AVX1: # BB#0:
|
|
|
|
; AVX1-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[0,1,0,1]
|
|
|
|
; AVX1-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX2-LABEL: combine_nested_undef_test4:
|
|
|
|
; AVX2: # BB#0:
|
|
|
|
; AVX2-NEXT: vpbroadcastq %xmm0, %xmm0
|
|
|
|
; AVX2-NEXT: retq
|
2014-10-02 07:42:58 +00:00
|
|
|
%1 = shufflevector <4 x i32> %A, <4 x i32> %B, <4 x i32> <i32 0, i32 4, i32 7, i32 1>
|
|
|
|
%2 = shufflevector <4 x i32> %1, <4 x i32> undef, <4 x i32> <i32 4, i32 4, i32 0, i32 3>
|
|
|
|
ret <4 x i32> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x i32> @combine_nested_undef_test5(<4 x i32> %A, <4 x i32> %B) {
|
|
|
|
; SSE-LABEL: combine_nested_undef_test5:
|
|
|
|
; SSE: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; SSE-NEXT: pshufd {{.*#+}} xmm0 = xmm0[2,3,2,3]
|
2014-10-02 07:42:58 +00:00
|
|
|
; SSE-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_nested_undef_test5:
|
|
|
|
; AVX: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; AVX-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[2,3,2,3]
|
2014-10-02 07:42:58 +00:00
|
|
|
; AVX-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x i32> %A, <4 x i32> %B, <4 x i32> <i32 5, i32 5, i32 2, i32 3>
|
|
|
|
%2 = shufflevector <4 x i32> %1, <4 x i32> undef, <4 x i32> <i32 2, i32 4, i32 4, i32 3>
|
|
|
|
ret <4 x i32> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x i32> @combine_nested_undef_test6(<4 x i32> %A, <4 x i32> %B) {
|
|
|
|
; SSE-LABEL: combine_nested_undef_test6:
|
|
|
|
; SSE: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; SSE-NEXT: pshufd {{.*#+}} xmm0 = xmm0[2,3,0,1]
|
2014-10-02 07:42:58 +00:00
|
|
|
; SSE-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_nested_undef_test6:
|
|
|
|
; AVX: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; AVX-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[2,3,0,1]
|
2014-10-02 07:42:58 +00:00
|
|
|
; AVX-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x i32> %A, <4 x i32> %B, <4 x i32> <i32 0, i32 6, i32 2, i32 4>
|
|
|
|
%2 = shufflevector <4 x i32> %1, <4 x i32> undef, <4 x i32> <i32 2, i32 4, i32 0, i32 4>
|
|
|
|
ret <4 x i32> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x i32> @combine_nested_undef_test7(<4 x i32> %A, <4 x i32> %B) {
|
|
|
|
; SSE-LABEL: combine_nested_undef_test7:
|
|
|
|
; SSE: # BB#0:
|
|
|
|
; SSE-NEXT: pshufd {{.*#+}} xmm0 = xmm0[0,2,0,2]
|
|
|
|
; SSE-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_nested_undef_test7:
|
|
|
|
; AVX: # BB#0:
|
|
|
|
; AVX-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[0,2,0,2]
|
|
|
|
; AVX-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x i32> %A, <4 x i32> %B, <4 x i32> <i32 0, i32 5, i32 2, i32 7>
|
|
|
|
%2 = shufflevector <4 x i32> %1, <4 x i32> undef, <4 x i32> <i32 0, i32 2, i32 0, i32 2>
|
|
|
|
ret <4 x i32> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x i32> @combine_nested_undef_test8(<4 x i32> %A, <4 x i32> %B) {
|
|
|
|
; SSE-LABEL: combine_nested_undef_test8:
|
|
|
|
; SSE: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; SSE-NEXT: pshufd {{.*#+}} xmm0 = xmm0[1,1,3,3]
|
2014-10-02 07:42:58 +00:00
|
|
|
; SSE-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_nested_undef_test8:
|
|
|
|
; AVX: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; AVX-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[1,1,3,3]
|
2014-10-02 07:42:58 +00:00
|
|
|
; AVX-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x i32> %A, <4 x i32> %B, <4 x i32> <i32 4, i32 1, i32 6, i32 3>
|
|
|
|
%2 = shufflevector <4 x i32> %1, <4 x i32> undef, <4 x i32> <i32 1, i32 4, i32 3, i32 4>
|
|
|
|
ret <4 x i32> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x i32> @combine_nested_undef_test9(<4 x i32> %A, <4 x i32> %B) {
|
|
|
|
; SSE-LABEL: combine_nested_undef_test9:
|
|
|
|
; SSE: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; SSE-NEXT: pshufd {{.*#+}} xmm0 = xmm0[1,3,2,2]
|
2014-10-02 07:42:58 +00:00
|
|
|
; SSE-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_nested_undef_test9:
|
|
|
|
; AVX: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; AVX-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[1,3,2,2]
|
2014-10-02 07:42:58 +00:00
|
|
|
; AVX-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x i32> %A, <4 x i32> %B, <4 x i32> <i32 1, i32 3, i32 2, i32 5>
|
|
|
|
%2 = shufflevector <4 x i32> %1, <4 x i32> undef, <4 x i32> <i32 0, i32 1, i32 4, i32 2>
|
|
|
|
ret <4 x i32> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x i32> @combine_nested_undef_test10(<4 x i32> %A, <4 x i32> %B) {
|
|
|
|
; SSE-LABEL: combine_nested_undef_test10:
|
|
|
|
; SSE: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; SSE-NEXT: pshufd {{.*#+}} xmm0 = xmm0[1,1,1,3]
|
2014-10-02 07:42:58 +00:00
|
|
|
; SSE-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_nested_undef_test10:
|
|
|
|
; AVX: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; AVX-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[1,1,1,3]
|
2014-10-02 07:42:58 +00:00
|
|
|
; AVX-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x i32> %A, <4 x i32> %B, <4 x i32> <i32 1, i32 1, i32 5, i32 5>
|
|
|
|
%2 = shufflevector <4 x i32> %1, <4 x i32> undef, <4 x i32> <i32 0, i32 4, i32 1, i32 4>
|
|
|
|
ret <4 x i32> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x i32> @combine_nested_undef_test11(<4 x i32> %A, <4 x i32> %B) {
|
|
|
|
; SSE-LABEL: combine_nested_undef_test11:
|
|
|
|
; SSE: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; SSE-NEXT: pshufd {{.*#+}} xmm0 = xmm0[1,1,2,1]
|
2014-10-02 07:42:58 +00:00
|
|
|
; SSE-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_nested_undef_test11:
|
|
|
|
; AVX: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; AVX-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[1,1,2,1]
|
2014-10-02 07:42:58 +00:00
|
|
|
; AVX-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x i32> %A, <4 x i32> %B, <4 x i32> <i32 1, i32 2, i32 5, i32 4>
|
|
|
|
%2 = shufflevector <4 x i32> %1, <4 x i32> undef, <4 x i32> <i32 0, i32 4, i32 1, i32 0>
|
|
|
|
ret <4 x i32> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x i32> @combine_nested_undef_test12(<4 x i32> %A, <4 x i32> %B) {
|
|
|
|
; SSE-LABEL: combine_nested_undef_test12:
|
|
|
|
; SSE: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; SSE-NEXT: pshufd {{.*#+}} xmm0 = xmm0[0,1,0,1]
|
2014-10-02 07:42:58 +00:00
|
|
|
; SSE-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX1-LABEL: combine_nested_undef_test12:
|
|
|
|
; AVX1: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; AVX1-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[0,1,0,1]
|
2014-10-02 07:42:58 +00:00
|
|
|
; AVX1-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX2-LABEL: combine_nested_undef_test12:
|
|
|
|
; AVX2: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; AVX2-NEXT: vpbroadcastq %xmm0, %xmm0
|
2014-10-02 07:42:58 +00:00
|
|
|
; AVX2-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x i32> %A, <4 x i32> %B, <4 x i32> <i32 0, i32 0, i32 2, i32 4>
|
|
|
|
%2 = shufflevector <4 x i32> %1, <4 x i32> undef, <4 x i32> <i32 1, i32 4, i32 0, i32 4>
|
|
|
|
ret <4 x i32> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
; The following pair of shuffles is folded into vector %A.
|
|
|
|
define <4 x i32> @combine_nested_undef_test13(<4 x i32> %A, <4 x i32> %B) {
|
|
|
|
; ALL-LABEL: combine_nested_undef_test13:
|
|
|
|
; ALL: # BB#0:
|
|
|
|
; ALL-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x i32> %A, <4 x i32> %B, <4 x i32> <i32 1, i32 4, i32 2, i32 6>
|
|
|
|
%2 = shufflevector <4 x i32> %1, <4 x i32> undef, <4 x i32> <i32 4, i32 0, i32 2, i32 4>
|
|
|
|
ret <4 x i32> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
; The following pair of shuffles is folded into vector %B.
|
|
|
|
define <4 x i32> @combine_nested_undef_test14(<4 x i32> %A, <4 x i32> %B) {
|
|
|
|
; SSE-LABEL: combine_nested_undef_test14:
|
|
|
|
; SSE: # BB#0:
|
|
|
|
; SSE-NEXT: movaps %xmm1, %xmm0
|
|
|
|
; SSE-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_nested_undef_test14:
|
|
|
|
; AVX: # BB#0:
|
|
|
|
; AVX-NEXT: vmovaps %xmm1, %xmm0
|
|
|
|
; AVX-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x i32> %A, <4 x i32> %B, <4 x i32> <i32 0, i32 6, i32 2, i32 4>
|
|
|
|
%2 = shufflevector <4 x i32> %1, <4 x i32> undef, <4 x i32> <i32 3, i32 4, i32 1, i32 4>
|
|
|
|
ret <4 x i32> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
; Verify that we don't optimize the following cases. We expect more than one shuffle.
|
|
|
|
;
|
|
|
|
; FIXME: Many of these already don't make sense, and the rest should stop
|
|
|
|
; making sense with th enew vector shuffle lowering. Revisit at least testing for
|
|
|
|
; it.
|
|
|
|
|
|
|
|
define <4 x i32> @combine_nested_undef_test15(<4 x i32> %A, <4 x i32> %B) {
|
2015-02-16 01:52:02 +00:00
|
|
|
; SSE2-LABEL: combine_nested_undef_test15:
|
|
|
|
; SSE2: # BB#0:
|
|
|
|
; SSE2-NEXT: shufps {{.*#+}} xmm1 = xmm1[0,0],xmm0[3,0]
|
|
|
|
; SSE2-NEXT: shufps {{.*#+}} xmm1 = xmm1[2,0],xmm0[0,1]
|
|
|
|
; SSE2-NEXT: movaps %xmm1, %xmm0
|
|
|
|
; SSE2-NEXT: retq
|
2014-10-02 07:42:58 +00:00
|
|
|
;
|
2015-02-16 01:52:02 +00:00
|
|
|
; SSSE3-LABEL: combine_nested_undef_test15:
|
|
|
|
; SSSE3: # BB#0:
|
|
|
|
; SSSE3-NEXT: shufps {{.*#+}} xmm1 = xmm1[0,0],xmm0[3,0]
|
|
|
|
; SSSE3-NEXT: shufps {{.*#+}} xmm1 = xmm1[2,0],xmm0[0,1]
|
|
|
|
; SSSE3-NEXT: movaps %xmm1, %xmm0
|
|
|
|
; SSSE3-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSE41-LABEL: combine_nested_undef_test15:
|
|
|
|
; SSE41: # BB#0:
|
|
|
|
; SSE41-NEXT: pshufd {{.*#+}} xmm1 = xmm1[0,0,1,1]
|
|
|
|
; SSE41-NEXT: pshufd {{.*#+}} xmm0 = xmm0[3,1,0,1]
|
|
|
|
; SSE41-NEXT: pblendw {{.*#+}} xmm0 = xmm0[0,1],xmm1[2,3],xmm0[4,5,6,7]
|
|
|
|
; SSE41-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX1-LABEL: combine_nested_undef_test15:
|
|
|
|
; AVX1: # BB#0:
|
|
|
|
; AVX1-NEXT: vpshufd {{.*#+}} xmm1 = xmm1[0,0,1,1]
|
|
|
|
; AVX1-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[3,1,0,1]
|
|
|
|
; AVX1-NEXT: vpblendw {{.*#+}} xmm0 = xmm0[0,1],xmm1[2,3],xmm0[4,5,6,7]
|
|
|
|
; AVX1-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX2-LABEL: combine_nested_undef_test15:
|
|
|
|
; AVX2: # BB#0:
|
|
|
|
; AVX2-NEXT: vpbroadcastd %xmm1, %xmm1
|
|
|
|
; AVX2-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[3,1,0,1]
|
|
|
|
; AVX2-NEXT: vpblendd {{.*#+}} xmm0 = xmm0[0],xmm1[1],xmm0[2,3]
|
|
|
|
; AVX2-NEXT: retq
|
2014-10-02 07:42:58 +00:00
|
|
|
%1 = shufflevector <4 x i32> %A, <4 x i32> %B, <4 x i32> <i32 0, i32 4, i32 3, i32 1>
|
|
|
|
%2 = shufflevector <4 x i32> %1, <4 x i32> undef, <4 x i32> <i32 2, i32 1, i32 0, i32 3>
|
|
|
|
ret <4 x i32> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x i32> @combine_nested_undef_test16(<4 x i32> %A, <4 x i32> %B) {
|
2015-02-15 08:26:30 +00:00
|
|
|
; SSE2-LABEL: combine_nested_undef_test16:
|
|
|
|
; SSE2: # BB#0:
|
2015-02-16 12:28:18 +00:00
|
|
|
; SSE2-NEXT: pshufd {{.*#+}} xmm1 = xmm1[1,3,2,3]
|
|
|
|
; SSE2-NEXT: pshufd {{.*#+}} xmm0 = xmm0[2,0,2,3]
|
|
|
|
; SSE2-NEXT: punpckldq {{.*#+}} xmm0 = xmm0[0],xmm1[0],xmm0[1],xmm1[1]
|
2015-02-15 08:26:30 +00:00
|
|
|
; SSE2-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSSE3-LABEL: combine_nested_undef_test16:
|
|
|
|
; SSSE3: # BB#0:
|
2015-02-16 12:28:18 +00:00
|
|
|
; SSSE3-NEXT: pshufd {{.*#+}} xmm1 = xmm1[1,3,2,3]
|
|
|
|
; SSSE3-NEXT: pshufd {{.*#+}} xmm0 = xmm0[2,0,2,3]
|
|
|
|
; SSSE3-NEXT: punpckldq {{.*#+}} xmm0 = xmm0[0],xmm1[0],xmm0[1],xmm1[1]
|
2015-02-15 08:26:30 +00:00
|
|
|
; SSSE3-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSE41-LABEL: combine_nested_undef_test16:
|
|
|
|
; SSE41: # BB#0:
|
2015-02-16 01:52:02 +00:00
|
|
|
; SSE41-NEXT: pshufd {{.*#+}} xmm0 = xmm0[2,3,0,1]
|
|
|
|
; SSE41-NEXT: pblendw {{.*#+}} xmm0 = xmm0[0,1],xmm1[2,3],xmm0[4,5],xmm1[6,7]
|
2015-02-15 08:26:30 +00:00
|
|
|
; SSE41-NEXT: retq
|
2014-10-02 07:42:58 +00:00
|
|
|
;
|
2015-02-16 01:52:02 +00:00
|
|
|
; AVX1-LABEL: combine_nested_undef_test16:
|
|
|
|
; AVX1: # BB#0:
|
|
|
|
; AVX1-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[2,3,0,1]
|
|
|
|
; AVX1-NEXT: vpblendw {{.*#+}} xmm0 = xmm0[0,1],xmm1[2,3],xmm0[4,5],xmm1[6,7]
|
|
|
|
; AVX1-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX2-LABEL: combine_nested_undef_test16:
|
|
|
|
; AVX2: # BB#0:
|
|
|
|
; AVX2-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[2,3,0,1]
|
|
|
|
; AVX2-NEXT: vpblendd {{.*#+}} xmm0 = xmm0[0],xmm1[1],xmm0[2],xmm1[3]
|
|
|
|
; AVX2-NEXT: retq
|
2014-10-02 07:42:58 +00:00
|
|
|
%1 = shufflevector <4 x i32> %A, <4 x i32> %B, <4 x i32> <i32 0, i32 5, i32 2, i32 7>
|
|
|
|
%2 = shufflevector <4 x i32> %1, <4 x i32> undef, <4 x i32> <i32 2, i32 1, i32 0, i32 3>
|
|
|
|
ret <4 x i32> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x i32> @combine_nested_undef_test17(<4 x i32> %A, <4 x i32> %B) {
|
2015-02-15 08:26:30 +00:00
|
|
|
; SSE2-LABEL: combine_nested_undef_test17:
|
|
|
|
; SSE2: # BB#0:
|
|
|
|
; SSE2-NEXT: shufps {{.*#+}} xmm1 = xmm1[0,0],xmm0[1,0]
|
|
|
|
; SSE2-NEXT: shufps {{.*#+}} xmm0 = xmm0[3,1],xmm1[0,2]
|
|
|
|
; SSE2-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSSE3-LABEL: combine_nested_undef_test17:
|
|
|
|
; SSSE3: # BB#0:
|
|
|
|
; SSSE3-NEXT: shufps {{.*#+}} xmm1 = xmm1[0,0],xmm0[1,0]
|
|
|
|
; SSSE3-NEXT: shufps {{.*#+}} xmm0 = xmm0[3,1],xmm1[0,2]
|
|
|
|
; SSSE3-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSE41-LABEL: combine_nested_undef_test17:
|
|
|
|
; SSE41: # BB#0:
|
2015-02-16 01:52:02 +00:00
|
|
|
; SSE41-NEXT: pblendw {{.*#+}} xmm0 = xmm1[0,1],xmm0[2,3,4,5,6,7]
|
|
|
|
; SSE41-NEXT: pshufd {{.*#+}} xmm0 = xmm0[3,1,0,1]
|
2015-02-15 08:26:30 +00:00
|
|
|
; SSE41-NEXT: retq
|
2014-10-02 07:42:58 +00:00
|
|
|
;
|
2015-02-16 01:52:02 +00:00
|
|
|
; AVX1-LABEL: combine_nested_undef_test17:
|
|
|
|
; AVX1: # BB#0:
|
|
|
|
; AVX1-NEXT: vpblendw {{.*#+}} xmm0 = xmm1[0,1],xmm0[2,3,4,5,6,7]
|
|
|
|
; AVX1-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[3,1,0,1]
|
|
|
|
; AVX1-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX2-LABEL: combine_nested_undef_test17:
|
|
|
|
; AVX2: # BB#0:
|
|
|
|
; AVX2-NEXT: vpblendd {{.*#+}} xmm0 = xmm1[0],xmm0[1,2,3]
|
|
|
|
; AVX2-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[3,1,0,1]
|
|
|
|
; AVX2-NEXT: retq
|
2014-10-02 07:42:58 +00:00
|
|
|
%1 = shufflevector <4 x i32> %A, <4 x i32> %B, <4 x i32> <i32 4, i32 1, i32 3, i32 1>
|
|
|
|
%2 = shufflevector <4 x i32> %1, <4 x i32> undef, <4 x i32> <i32 2, i32 1, i32 0, i32 3>
|
|
|
|
ret <4 x i32> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x i32> @combine_nested_undef_test18(<4 x i32> %A, <4 x i32> %B) {
|
|
|
|
; SSE-LABEL: combine_nested_undef_test18:
|
|
|
|
; SSE: # BB#0:
|
|
|
|
; SSE-NEXT: pshufd {{.*#+}} xmm0 = xmm1[1,1,0,3]
|
|
|
|
; SSE-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_nested_undef_test18:
|
|
|
|
; AVX: # BB#0:
|
|
|
|
; AVX-NEXT: vpshufd {{.*#+}} xmm0 = xmm1[1,1,0,3]
|
|
|
|
; AVX-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x i32> %A, <4 x i32> %B, <4 x i32> <i32 4, i32 5, i32 2, i32 7>
|
|
|
|
%2 = shufflevector <4 x i32> %1, <4 x i32> undef, <4 x i32> <i32 1, i32 1, i32 0, i32 3>
|
|
|
|
ret <4 x i32> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x i32> @combine_nested_undef_test19(<4 x i32> %A, <4 x i32> %B) {
|
2015-02-15 08:26:30 +00:00
|
|
|
; SSE2-LABEL: combine_nested_undef_test19:
|
|
|
|
; SSE2: # BB#0:
|
|
|
|
; SSE2-NEXT: shufps {{.*#+}} xmm1 = xmm1[1,0],xmm0[0,0]
|
|
|
|
; SSE2-NEXT: shufps {{.*#+}} xmm1 = xmm1[0,2],xmm0[0,0]
|
|
|
|
; SSE2-NEXT: movaps %xmm1, %xmm0
|
|
|
|
; SSE2-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSSE3-LABEL: combine_nested_undef_test19:
|
|
|
|
; SSSE3: # BB#0:
|
|
|
|
; SSSE3-NEXT: shufps {{.*#+}} xmm1 = xmm1[1,0],xmm0[0,0]
|
|
|
|
; SSSE3-NEXT: shufps {{.*#+}} xmm1 = xmm1[0,2],xmm0[0,0]
|
|
|
|
; SSSE3-NEXT: movaps %xmm1, %xmm0
|
|
|
|
; SSSE3-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSE41-LABEL: combine_nested_undef_test19:
|
|
|
|
; SSE41: # BB#0:
|
2015-02-16 01:52:02 +00:00
|
|
|
; SSE41-NEXT: pblendw {{.*#+}} xmm0 = xmm0[0,1],xmm1[2,3],xmm0[4,5,6,7]
|
|
|
|
; SSE41-NEXT: pshufd {{.*#+}} xmm0 = xmm0[1,0,0,0]
|
2015-02-15 08:26:30 +00:00
|
|
|
; SSE41-NEXT: retq
|
2014-10-02 07:42:58 +00:00
|
|
|
;
|
2015-02-16 01:52:02 +00:00
|
|
|
; AVX1-LABEL: combine_nested_undef_test19:
|
|
|
|
; AVX1: # BB#0:
|
|
|
|
; AVX1-NEXT: vpblendw {{.*#+}} xmm0 = xmm0[0,1],xmm1[2,3],xmm0[4,5,6,7]
|
|
|
|
; AVX1-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[1,0,0,0]
|
|
|
|
; AVX1-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX2-LABEL: combine_nested_undef_test19:
|
|
|
|
; AVX2: # BB#0:
|
|
|
|
; AVX2-NEXT: vpblendd {{.*#+}} xmm0 = xmm0[0],xmm1[1],xmm0[2,3]
|
|
|
|
; AVX2-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[1,0,0,0]
|
|
|
|
; AVX2-NEXT: retq
|
2014-10-02 07:42:58 +00:00
|
|
|
%1 = shufflevector <4 x i32> %A, <4 x i32> %B, <4 x i32> <i32 0, i32 4, i32 5, i32 6>
|
|
|
|
%2 = shufflevector <4 x i32> %1, <4 x i32> undef, <4 x i32> <i32 2, i32 0, i32 0, i32 0>
|
|
|
|
ret <4 x i32> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x i32> @combine_nested_undef_test20(<4 x i32> %A, <4 x i32> %B) {
|
2015-02-15 08:26:30 +00:00
|
|
|
; SSE2-LABEL: combine_nested_undef_test20:
|
|
|
|
; SSE2: # BB#0:
|
|
|
|
; SSE2-NEXT: shufps {{.*#+}} xmm1 = xmm1[0,0],xmm0[2,3]
|
|
|
|
; SSE2-NEXT: shufps {{.*#+}} xmm1 = xmm1[0,2,3,1]
|
|
|
|
; SSE2-NEXT: movaps %xmm1, %xmm0
|
|
|
|
; SSE2-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSSE3-LABEL: combine_nested_undef_test20:
|
|
|
|
; SSSE3: # BB#0:
|
|
|
|
; SSSE3-NEXT: shufps {{.*#+}} xmm1 = xmm1[0,0],xmm0[2,3]
|
|
|
|
; SSSE3-NEXT: shufps {{.*#+}} xmm1 = xmm1[0,2,3,1]
|
|
|
|
; SSSE3-NEXT: movaps %xmm1, %xmm0
|
|
|
|
; SSSE3-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSE41-LABEL: combine_nested_undef_test20:
|
|
|
|
; SSE41: # BB#0:
|
2015-02-16 01:52:02 +00:00
|
|
|
; SSE41-NEXT: pblendw {{.*#+}} xmm0 = xmm1[0,1,2,3],xmm0[4,5,6,7]
|
|
|
|
; SSE41-NEXT: pshufd {{.*#+}} xmm0 = xmm0[0,2,3,0]
|
2015-02-15 08:26:30 +00:00
|
|
|
; SSE41-NEXT: retq
|
2014-10-02 07:42:58 +00:00
|
|
|
;
|
2015-02-16 01:52:02 +00:00
|
|
|
; AVX1-LABEL: combine_nested_undef_test20:
|
|
|
|
; AVX1: # BB#0:
|
|
|
|
; AVX1-NEXT: vpblendw {{.*#+}} xmm0 = xmm1[0,1,2,3],xmm0[4,5,6,7]
|
|
|
|
; AVX1-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[0,2,3,0]
|
|
|
|
; AVX1-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX2-LABEL: combine_nested_undef_test20:
|
|
|
|
; AVX2: # BB#0:
|
|
|
|
; AVX2-NEXT: vpblendd {{.*#+}} xmm0 = xmm1[0,1],xmm0[2,3]
|
|
|
|
; AVX2-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[0,2,3,0]
|
|
|
|
; AVX2-NEXT: retq
|
2014-10-02 07:42:58 +00:00
|
|
|
%1 = shufflevector <4 x i32> %A, <4 x i32> %B, <4 x i32> <i32 3, i32 2, i32 4, i32 4>
|
|
|
|
%2 = shufflevector <4 x i32> %1, <4 x i32> undef, <4 x i32> <i32 2, i32 1, i32 0, i32 3>
|
|
|
|
ret <4 x i32> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x i32> @combine_nested_undef_test21(<4 x i32> %A, <4 x i32> %B) {
|
2015-02-15 08:26:30 +00:00
|
|
|
; SSE2-LABEL: combine_nested_undef_test21:
|
|
|
|
; SSE2: # BB#0:
|
2015-02-16 12:28:18 +00:00
|
|
|
; SSE2-NEXT: pshufd {{.*#+}} xmm2 = xmm0[1,1,2,3]
|
|
|
|
; SSE2-NEXT: pshufd {{.*#+}} xmm0 = xmm1[0,0,1,1]
|
|
|
|
; SSE2-NEXT: punpckldq {{.*#+}} xmm0 = xmm0[0],xmm2[0],xmm0[1],xmm2[1]
|
2015-02-15 08:26:30 +00:00
|
|
|
; SSE2-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSSE3-LABEL: combine_nested_undef_test21:
|
|
|
|
; SSSE3: # BB#0:
|
2015-02-16 12:28:18 +00:00
|
|
|
; SSSE3-NEXT: pshufd {{.*#+}} xmm2 = xmm0[1,1,2,3]
|
|
|
|
; SSSE3-NEXT: pshufd {{.*#+}} xmm0 = xmm1[0,0,1,1]
|
|
|
|
; SSSE3-NEXT: punpckldq {{.*#+}} xmm0 = xmm0[0],xmm2[0],xmm0[1],xmm2[1]
|
2015-02-15 08:26:30 +00:00
|
|
|
; SSSE3-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSE41-LABEL: combine_nested_undef_test21:
|
|
|
|
; SSE41: # BB#0:
|
2015-02-16 01:52:02 +00:00
|
|
|
; SSE41-NEXT: pblendw {{.*#+}} xmm0 = xmm1[0,1],xmm0[2,3],xmm1[4,5,6,7]
|
|
|
|
; SSE41-NEXT: pshufd {{.*#+}} xmm0 = xmm0[0,1,0,1]
|
2015-02-15 08:26:30 +00:00
|
|
|
; SSE41-NEXT: retq
|
2014-10-02 07:42:58 +00:00
|
|
|
;
|
2015-02-16 01:52:02 +00:00
|
|
|
; AVX1-LABEL: combine_nested_undef_test21:
|
|
|
|
; AVX1: # BB#0:
|
|
|
|
; AVX1-NEXT: vpblendw {{.*#+}} xmm0 = xmm1[0,1],xmm0[2,3],xmm1[4,5,6,7]
|
|
|
|
; AVX1-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[0,1,0,1]
|
|
|
|
; AVX1-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX2-LABEL: combine_nested_undef_test21:
|
|
|
|
; AVX2: # BB#0:
|
|
|
|
; AVX2-NEXT: vpblendd {{.*#+}} xmm0 = xmm1[0],xmm0[1],xmm1[2,3]
|
|
|
|
; AVX2-NEXT: vpbroadcastq %xmm0, %xmm0
|
|
|
|
; AVX2-NEXT: retq
|
2014-10-02 07:42:58 +00:00
|
|
|
%1 = shufflevector <4 x i32> %A, <4 x i32> %B, <4 x i32> <i32 4, i32 1, i32 3, i32 1>
|
|
|
|
%2 = shufflevector <4 x i32> %1, <4 x i32> undef, <4 x i32> <i32 0, i32 1, i32 0, i32 3>
|
|
|
|
ret <4 x i32> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
; Test that we correctly combine shuffles according to rule
|
|
|
|
; shuffle(shuffle(x, y), undef) -> shuffle(y, undef)
|
|
|
|
|
|
|
|
define <4 x i32> @combine_nested_undef_test22(<4 x i32> %A, <4 x i32> %B) {
|
|
|
|
; SSE-LABEL: combine_nested_undef_test22:
|
|
|
|
; SSE: # BB#0:
|
|
|
|
; SSE-NEXT: pshufd {{.*#+}} xmm0 = xmm1[1,1,1,3]
|
|
|
|
; SSE-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_nested_undef_test22:
|
|
|
|
; AVX: # BB#0:
|
|
|
|
; AVX-NEXT: vpshufd {{.*#+}} xmm0 = xmm1[1,1,1,3]
|
|
|
|
; AVX-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x i32> %A, <4 x i32> %B, <4 x i32> <i32 4, i32 5, i32 2, i32 7>
|
|
|
|
%2 = shufflevector <4 x i32> %1, <4 x i32> undef, <4 x i32> <i32 1, i32 1, i32 1, i32 3>
|
|
|
|
ret <4 x i32> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x i32> @combine_nested_undef_test23(<4 x i32> %A, <4 x i32> %B) {
|
|
|
|
; SSE-LABEL: combine_nested_undef_test23:
|
|
|
|
; SSE: # BB#0:
|
|
|
|
; SSE-NEXT: pshufd {{.*#+}} xmm0 = xmm1[0,1,0,3]
|
|
|
|
; SSE-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_nested_undef_test23:
|
|
|
|
; AVX: # BB#0:
|
|
|
|
; AVX-NEXT: vpshufd {{.*#+}} xmm0 = xmm1[0,1,0,3]
|
|
|
|
; AVX-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x i32> %A, <4 x i32> %B, <4 x i32> <i32 4, i32 5, i32 2, i32 7>
|
|
|
|
%2 = shufflevector <4 x i32> %1, <4 x i32> undef, <4 x i32> <i32 0, i32 1, i32 0, i32 3>
|
|
|
|
ret <4 x i32> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x i32> @combine_nested_undef_test24(<4 x i32> %A, <4 x i32> %B) {
|
|
|
|
; SSE-LABEL: combine_nested_undef_test24:
|
|
|
|
; SSE: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; SSE-NEXT: pshufd {{.*#+}} xmm0 = xmm1[0,3,2,3]
|
2014-10-02 07:42:58 +00:00
|
|
|
; SSE-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_nested_undef_test24:
|
|
|
|
; AVX: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; AVX-NEXT: vpshufd {{.*#+}} xmm0 = xmm1[0,3,2,3]
|
2014-10-02 07:42:58 +00:00
|
|
|
; AVX-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x i32> %A, <4 x i32> %B, <4 x i32> <i32 4, i32 1, i32 6, i32 7>
|
|
|
|
%2 = shufflevector <4 x i32> %1, <4 x i32> undef, <4 x i32> <i32 0, i32 3, i32 2, i32 4>
|
|
|
|
ret <4 x i32> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x i32> @combine_nested_undef_test25(<4 x i32> %A, <4 x i32> %B) {
|
|
|
|
; SSE-LABEL: combine_nested_undef_test25:
|
|
|
|
; SSE: # BB#0:
|
|
|
|
; SSE-NEXT: pshufd {{.*#+}} xmm0 = xmm0[0,1,0,1]
|
|
|
|
; SSE-NEXT: retq
|
|
|
|
;
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; AVX1-LABEL: combine_nested_undef_test25:
|
|
|
|
; AVX1: # BB#0:
|
|
|
|
; AVX1-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[0,1,0,1]
|
|
|
|
; AVX1-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX2-LABEL: combine_nested_undef_test25:
|
|
|
|
; AVX2: # BB#0:
|
|
|
|
; AVX2-NEXT: vpbroadcastq %xmm0, %xmm0
|
|
|
|
; AVX2-NEXT: retq
|
2014-10-02 07:42:58 +00:00
|
|
|
%1 = shufflevector <4 x i32> %B, <4 x i32> %A, <4 x i32> <i32 1, i32 5, i32 2, i32 4>
|
|
|
|
%2 = shufflevector <4 x i32> %1, <4 x i32> undef, <4 x i32> <i32 3, i32 1, i32 3, i32 1>
|
|
|
|
ret <4 x i32> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x i32> @combine_nested_undef_test26(<4 x i32> %A, <4 x i32> %B) {
|
|
|
|
; SSE-LABEL: combine_nested_undef_test26:
|
|
|
|
; SSE: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; SSE-NEXT: pshufd {{.*#+}} xmm0 = xmm0[2,3,2,3]
|
2014-10-02 07:42:58 +00:00
|
|
|
; SSE-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_nested_undef_test26:
|
|
|
|
; AVX: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; AVX-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[2,3,2,3]
|
2014-10-02 07:42:58 +00:00
|
|
|
; AVX-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x i32> %B, <4 x i32> %A, <4 x i32> <i32 1, i32 2, i32 6, i32 7>
|
|
|
|
%2 = shufflevector <4 x i32> %1, <4 x i32> undef, <4 x i32> <i32 2, i32 3, i32 2, i32 3>
|
|
|
|
ret <4 x i32> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x i32> @combine_nested_undef_test27(<4 x i32> %A, <4 x i32> %B) {
|
|
|
|
; SSE-LABEL: combine_nested_undef_test27:
|
|
|
|
; SSE: # BB#0:
|
|
|
|
; SSE-NEXT: pshufd {{.*#+}} xmm0 = xmm0[0,1,0,1]
|
|
|
|
; SSE-NEXT: retq
|
|
|
|
;
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; AVX1-LABEL: combine_nested_undef_test27:
|
|
|
|
; AVX1: # BB#0:
|
|
|
|
; AVX1-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[0,1,0,1]
|
|
|
|
; AVX1-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX2-LABEL: combine_nested_undef_test27:
|
|
|
|
; AVX2: # BB#0:
|
|
|
|
; AVX2-NEXT: vpbroadcastq %xmm0, %xmm0
|
|
|
|
; AVX2-NEXT: retq
|
2014-10-02 07:42:58 +00:00
|
|
|
%1 = shufflevector <4 x i32> %B, <4 x i32> %A, <4 x i32> <i32 2, i32 1, i32 5, i32 4>
|
|
|
|
%2 = shufflevector <4 x i32> %1, <4 x i32> undef, <4 x i32> <i32 3, i32 2, i32 3, i32 2>
|
|
|
|
ret <4 x i32> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x i32> @combine_nested_undef_test28(<4 x i32> %A, <4 x i32> %B) {
|
|
|
|
; SSE-LABEL: combine_nested_undef_test28:
|
|
|
|
; SSE: # BB#0:
|
|
|
|
; SSE-NEXT: pshufd {{.*#+}} xmm0 = xmm0[0,1,1,0]
|
|
|
|
; SSE-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_nested_undef_test28:
|
|
|
|
; AVX: # BB#0:
|
|
|
|
; AVX-NEXT: vpshufd {{.*#+}} xmm0 = xmm0[0,1,1,0]
|
|
|
|
; AVX-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x i32> %B, <4 x i32> %A, <4 x i32> <i32 1, i32 2, i32 4, i32 5>
|
|
|
|
%2 = shufflevector <4 x i32> %1, <4 x i32> undef, <4 x i32> <i32 2, i32 3, i32 3, i32 2>
|
|
|
|
ret <4 x i32> %2
|
|
|
|
}
|
2014-10-02 07:56:47 +00:00
|
|
|
|
|
|
|
define <4 x float> @combine_test1(<4 x float> %a, <4 x float> %b) {
|
2014-12-07 17:15:56 +00:00
|
|
|
; SSE-LABEL: combine_test1:
|
|
|
|
; SSE: # BB#0:
|
|
|
|
; SSE-NEXT: movaps %xmm1, %xmm0
|
|
|
|
; SSE-NEXT: retq
|
2014-10-02 07:56:47 +00:00
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_test1:
|
|
|
|
; AVX: # BB#0:
|
|
|
|
; AVX-NEXT: vmovaps %xmm1, %xmm0
|
|
|
|
; AVX-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x float> %a, <4 x float> %b, <4 x i32> <i32 4, i32 1, i32 6, i32 3>
|
|
|
|
%2 = shufflevector <4 x float> %1, <4 x float> %b, <4 x i32> <i32 0, i32 5, i32 2, i32 7>
|
|
|
|
ret <4 x float> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x float> @combine_test2(<4 x float> %a, <4 x float> %b) {
|
|
|
|
; SSE2-LABEL: combine_test2:
|
|
|
|
; SSE2: # BB#0:
|
2015-02-04 00:58:42 +00:00
|
|
|
; SSE2-NEXT: movss {{.*#+}} xmm1 = xmm0[0],xmm1[1,2,3]
|
[DAG] Improved target independent vector shuffle folding logic.
This patch teaches the DAGCombiner how to combine shuffles according to rules:
shuffle(shuffle(A, Undef, M0), B, M1) -> shuffle(B, A, M2)
shuffle(shuffle(A, B, M0), B, M1) -> shuffle(B, A, M2)
shuffle(shuffle(A, B, M0), A, M1) -> shuffle(B, A, M2)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222090 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-15 22:56:25 +00:00
|
|
|
; SSE2-NEXT: movaps %xmm1, %xmm0
|
2014-10-02 07:56:47 +00:00
|
|
|
; SSE2-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSSE3-LABEL: combine_test2:
|
|
|
|
; SSSE3: # BB#0:
|
2015-02-04 00:58:42 +00:00
|
|
|
; SSSE3-NEXT: movss {{.*#+}} xmm1 = xmm0[0],xmm1[1,2,3]
|
[DAG] Improved target independent vector shuffle folding logic.
This patch teaches the DAGCombiner how to combine shuffles according to rules:
shuffle(shuffle(A, Undef, M0), B, M1) -> shuffle(B, A, M2)
shuffle(shuffle(A, B, M0), B, M1) -> shuffle(B, A, M2)
shuffle(shuffle(A, B, M0), A, M1) -> shuffle(B, A, M2)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222090 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-15 22:56:25 +00:00
|
|
|
; SSSE3-NEXT: movaps %xmm1, %xmm0
|
2014-10-02 07:56:47 +00:00
|
|
|
; SSSE3-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSE41-LABEL: combine_test2:
|
|
|
|
; SSE41: # BB#0:
|
2014-11-04 23:25:08 +00:00
|
|
|
; SSE41-NEXT: blendps {{.*#+}} xmm0 = xmm0[0],xmm1[1,2,3]
|
2014-10-02 07:56:47 +00:00
|
|
|
; SSE41-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_test2:
|
|
|
|
; AVX: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; AVX-NEXT: vblendps {{.*#+}} xmm0 = xmm0[0],xmm1[1,2,3]
|
2014-10-02 07:56:47 +00:00
|
|
|
; AVX-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x float> %a, <4 x float> %b, <4 x i32> <i32 0, i32 5, i32 2, i32 7>
|
|
|
|
%2 = shufflevector <4 x float> %1, <4 x float> %b, <4 x i32> <i32 0, i32 1, i32 6, i32 3>
|
|
|
|
ret <4 x float> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x float> @combine_test3(<4 x float> %a, <4 x float> %b) {
|
|
|
|
; SSE-LABEL: combine_test3:
|
|
|
|
; SSE: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; SSE-NEXT: unpcklpd {{.*#+}} xmm0 = xmm0[0],xmm1[0]
|
2014-10-02 07:56:47 +00:00
|
|
|
; SSE-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_test3:
|
|
|
|
; AVX: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; AVX-NEXT: vunpcklpd {{.*#+}} xmm0 = xmm0[0],xmm1[0]
|
2014-10-02 07:56:47 +00:00
|
|
|
; AVX-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x float> %a, <4 x float> %b, <4 x i32> <i32 0, i32 5, i32 1, i32 7>
|
|
|
|
%2 = shufflevector <4 x float> %1, <4 x float> %b, <4 x i32> <i32 0, i32 2, i32 4, i32 1>
|
|
|
|
ret <4 x float> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x float> @combine_test4(<4 x float> %a, <4 x float> %b) {
|
|
|
|
; SSE-LABEL: combine_test4:
|
|
|
|
; SSE: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; SSE-NEXT: unpckhpd {{.*#+}} xmm1 = xmm1[1],xmm0[1]
|
|
|
|
; SSE-NEXT: movapd %xmm1, %xmm0
|
2014-10-02 07:56:47 +00:00
|
|
|
; SSE-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_test4:
|
|
|
|
; AVX: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; AVX-NEXT: vunpckhpd {{.*#+}} xmm0 = xmm1[1],xmm0[1]
|
2014-10-02 07:56:47 +00:00
|
|
|
; AVX-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x float> %a, <4 x float> %b, <4 x i32> <i32 2, i32 3, i32 5, i32 5>
|
|
|
|
%2 = shufflevector <4 x float> %1, <4 x float> %b, <4 x i32> <i32 6, i32 7, i32 0, i32 1>
|
|
|
|
ret <4 x float> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x float> @combine_test5(<4 x float> %a, <4 x float> %b) {
|
|
|
|
; SSE2-LABEL: combine_test5:
|
|
|
|
; SSE2: # BB#0:
|
2015-02-15 06:37:21 +00:00
|
|
|
; SSE2-NEXT: shufps {{.*#+}} xmm0 = xmm0[1,0],xmm1[0,0]
|
|
|
|
; SSE2-NEXT: shufps {{.*#+}} xmm0 = xmm0[2,0],xmm1[2,3]
|
2014-10-02 07:56:47 +00:00
|
|
|
; SSE2-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSSE3-LABEL: combine_test5:
|
|
|
|
; SSSE3: # BB#0:
|
2015-02-15 06:37:21 +00:00
|
|
|
; SSSE3-NEXT: shufps {{.*#+}} xmm0 = xmm0[1,0],xmm1[0,0]
|
|
|
|
; SSSE3-NEXT: shufps {{.*#+}} xmm0 = xmm0[2,0],xmm1[2,3]
|
2014-10-02 07:56:47 +00:00
|
|
|
; SSSE3-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSE41-LABEL: combine_test5:
|
|
|
|
; SSE41: # BB#0:
|
2014-11-04 23:25:08 +00:00
|
|
|
; SSE41-NEXT: blendps {{.*#+}} xmm0 = xmm1[0],xmm0[1],xmm1[2,3]
|
2014-10-02 07:56:47 +00:00
|
|
|
; SSE41-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_test5:
|
|
|
|
; AVX: # BB#0:
|
|
|
|
; AVX-NEXT: vblendps {{.*#+}} xmm0 = xmm1[0],xmm0[1],xmm1[2,3]
|
|
|
|
; AVX-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x float> %a, <4 x float> %b, <4 x i32> <i32 4, i32 1, i32 6, i32 3>
|
|
|
|
%2 = shufflevector <4 x float> %1, <4 x float> %b, <4 x i32> <i32 0, i32 1, i32 2, i32 7>
|
|
|
|
ret <4 x float> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x i32> @combine_test6(<4 x i32> %a, <4 x i32> %b) {
|
2014-12-07 17:15:56 +00:00
|
|
|
; SSE-LABEL: combine_test6:
|
|
|
|
; SSE: # BB#0:
|
|
|
|
; SSE-NEXT: movaps %xmm1, %xmm0
|
|
|
|
; SSE-NEXT: retq
|
2014-10-02 07:56:47 +00:00
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_test6:
|
|
|
|
; AVX: # BB#0:
|
|
|
|
; AVX-NEXT: vmovaps %xmm1, %xmm0
|
|
|
|
; AVX-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x i32> %a, <4 x i32> %b, <4 x i32> <i32 4, i32 1, i32 6, i32 3>
|
|
|
|
%2 = shufflevector <4 x i32> %1, <4 x i32> %b, <4 x i32> <i32 0, i32 5, i32 2, i32 7>
|
|
|
|
ret <4 x i32> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x i32> @combine_test7(<4 x i32> %a, <4 x i32> %b) {
|
|
|
|
; SSE2-LABEL: combine_test7:
|
|
|
|
; SSE2: # BB#0:
|
2015-02-04 00:58:42 +00:00
|
|
|
; SSE2-NEXT: movss {{.*#+}} xmm1 = xmm0[0],xmm1[1,2,3]
|
[DAG] Improved target independent vector shuffle folding logic.
This patch teaches the DAGCombiner how to combine shuffles according to rules:
shuffle(shuffle(A, Undef, M0), B, M1) -> shuffle(B, A, M2)
shuffle(shuffle(A, B, M0), B, M1) -> shuffle(B, A, M2)
shuffle(shuffle(A, B, M0), A, M1) -> shuffle(B, A, M2)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222090 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-15 22:56:25 +00:00
|
|
|
; SSE2-NEXT: movaps %xmm1, %xmm0
|
2014-10-02 07:56:47 +00:00
|
|
|
; SSE2-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSSE3-LABEL: combine_test7:
|
|
|
|
; SSSE3: # BB#0:
|
2015-02-04 00:58:42 +00:00
|
|
|
; SSSE3-NEXT: movss {{.*#+}} xmm1 = xmm0[0],xmm1[1,2,3]
|
[DAG] Improved target independent vector shuffle folding logic.
This patch teaches the DAGCombiner how to combine shuffles according to rules:
shuffle(shuffle(A, Undef, M0), B, M1) -> shuffle(B, A, M2)
shuffle(shuffle(A, B, M0), B, M1) -> shuffle(B, A, M2)
shuffle(shuffle(A, B, M0), A, M1) -> shuffle(B, A, M2)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222090 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-15 22:56:25 +00:00
|
|
|
; SSSE3-NEXT: movaps %xmm1, %xmm0
|
2014-10-02 07:56:47 +00:00
|
|
|
; SSSE3-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSE41-LABEL: combine_test7:
|
|
|
|
; SSE41: # BB#0:
|
2014-11-04 23:25:08 +00:00
|
|
|
; SSE41-NEXT: pblendw {{.*#+}} xmm0 = xmm0[0,1],xmm1[2,3,4,5,6,7]
|
2014-10-02 07:56:47 +00:00
|
|
|
; SSE41-NEXT: retq
|
|
|
|
;
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; AVX1-LABEL: combine_test7:
|
|
|
|
; AVX1: # BB#0:
|
|
|
|
; AVX1-NEXT: vpblendw {{.*#+}} xmm0 = xmm0[0,1],xmm1[2,3,4,5,6,7]
|
|
|
|
; AVX1-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX2-LABEL: combine_test7:
|
|
|
|
; AVX2: # BB#0:
|
|
|
|
; AVX2-NEXT: vpblendd {{.*#+}} xmm0 = xmm0[0],xmm1[1,2,3]
|
|
|
|
; AVX2-NEXT: retq
|
2014-10-02 07:56:47 +00:00
|
|
|
%1 = shufflevector <4 x i32> %a, <4 x i32> %b, <4 x i32> <i32 0, i32 5, i32 2, i32 7>
|
|
|
|
%2 = shufflevector <4 x i32> %1, <4 x i32> %b, <4 x i32> <i32 0, i32 1, i32 6, i32 3>
|
|
|
|
ret <4 x i32> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x i32> @combine_test8(<4 x i32> %a, <4 x i32> %b) {
|
|
|
|
; SSE-LABEL: combine_test8:
|
|
|
|
; SSE: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; SSE-NEXT: punpcklqdq {{.*#+}} xmm0 = xmm0[0],xmm1[0]
|
2014-10-02 07:56:47 +00:00
|
|
|
; SSE-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_test8:
|
|
|
|
; AVX: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; AVX-NEXT: vpunpcklqdq {{.*#+}} xmm0 = xmm0[0],xmm1[0]
|
2014-10-02 07:56:47 +00:00
|
|
|
; AVX-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x i32> %a, <4 x i32> %b, <4 x i32> <i32 0, i32 5, i32 1, i32 7>
|
|
|
|
%2 = shufflevector <4 x i32> %1, <4 x i32> %b, <4 x i32> <i32 0, i32 2, i32 4, i32 1>
|
|
|
|
ret <4 x i32> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x i32> @combine_test9(<4 x i32> %a, <4 x i32> %b) {
|
|
|
|
; SSE-LABEL: combine_test9:
|
|
|
|
; SSE: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; SSE-NEXT: punpckhqdq {{.*#+}} xmm1 = xmm1[1],xmm0[1]
|
|
|
|
; SSE-NEXT: movdqa %xmm1, %xmm0
|
2014-10-02 07:56:47 +00:00
|
|
|
; SSE-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_test9:
|
|
|
|
; AVX: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; AVX-NEXT: vpunpckhqdq {{.*#+}} xmm0 = xmm1[1],xmm0[1]
|
2014-10-02 07:56:47 +00:00
|
|
|
; AVX-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x i32> %a, <4 x i32> %b, <4 x i32> <i32 2, i32 3, i32 5, i32 5>
|
|
|
|
%2 = shufflevector <4 x i32> %1, <4 x i32> %b, <4 x i32> <i32 6, i32 7, i32 0, i32 1>
|
|
|
|
ret <4 x i32> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x i32> @combine_test10(<4 x i32> %a, <4 x i32> %b) {
|
|
|
|
; SSE2-LABEL: combine_test10:
|
|
|
|
; SSE2: # BB#0:
|
2015-02-15 06:37:21 +00:00
|
|
|
; SSE2-NEXT: shufps {{.*#+}} xmm0 = xmm0[1,0],xmm1[0,0]
|
|
|
|
; SSE2-NEXT: shufps {{.*#+}} xmm0 = xmm0[2,0],xmm1[2,3]
|
2014-10-02 07:56:47 +00:00
|
|
|
; SSE2-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSSE3-LABEL: combine_test10:
|
|
|
|
; SSSE3: # BB#0:
|
2015-02-15 06:37:21 +00:00
|
|
|
; SSSE3-NEXT: shufps {{.*#+}} xmm0 = xmm0[1,0],xmm1[0,0]
|
|
|
|
; SSSE3-NEXT: shufps {{.*#+}} xmm0 = xmm0[2,0],xmm1[2,3]
|
2014-10-02 07:56:47 +00:00
|
|
|
; SSSE3-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSE41-LABEL: combine_test10:
|
|
|
|
; SSE41: # BB#0:
|
2014-11-04 23:25:08 +00:00
|
|
|
; SSE41-NEXT: pblendw {{.*#+}} xmm0 = xmm1[0,1],xmm0[2,3],xmm1[4,5,6,7]
|
2014-10-02 07:56:47 +00:00
|
|
|
; SSE41-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX1-LABEL: combine_test10:
|
|
|
|
; AVX1: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; AVX1-NEXT: vpblendw {{.*#+}} xmm0 = xmm1[0,1],xmm0[2,3],xmm1[4,5,6,7]
|
2014-10-02 07:56:47 +00:00
|
|
|
; AVX1-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX2-LABEL: combine_test10:
|
|
|
|
; AVX2: # BB#0:
|
|
|
|
; AVX2-NEXT: vpblendd {{.*#+}} xmm0 = xmm1[0],xmm0[1],xmm1[2,3]
|
|
|
|
; AVX2-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x i32> %a, <4 x i32> %b, <4 x i32> <i32 4, i32 1, i32 6, i32 3>
|
|
|
|
%2 = shufflevector <4 x i32> %1, <4 x i32> %b, <4 x i32> <i32 0, i32 1, i32 2, i32 7>
|
|
|
|
ret <4 x i32> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x float> @combine_test11(<4 x float> %a, <4 x float> %b) {
|
|
|
|
; ALL-LABEL: combine_test11:
|
|
|
|
; ALL: # BB#0:
|
|
|
|
; ALL-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x float> %a, <4 x float> %b, <4 x i32> <i32 4, i32 1, i32 6, i32 3>
|
|
|
|
%2 = shufflevector <4 x float> %1, <4 x float> %a, <4 x i32> <i32 4, i32 1, i32 6, i32 3>
|
|
|
|
ret <4 x float> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x float> @combine_test12(<4 x float> %a, <4 x float> %b) {
|
|
|
|
; SSE2-LABEL: combine_test12:
|
|
|
|
; SSE2: # BB#0:
|
2015-02-04 00:58:42 +00:00
|
|
|
; SSE2-NEXT: movss {{.*#+}} xmm1 = xmm0[0],xmm1[1,2,3]
|
2014-10-02 07:56:47 +00:00
|
|
|
; SSE2-NEXT: movaps %xmm1, %xmm0
|
|
|
|
; SSE2-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSSE3-LABEL: combine_test12:
|
|
|
|
; SSSE3: # BB#0:
|
2015-02-04 00:58:42 +00:00
|
|
|
; SSSE3-NEXT: movss {{.*#+}} xmm1 = xmm0[0],xmm1[1,2,3]
|
2014-10-02 07:56:47 +00:00
|
|
|
; SSSE3-NEXT: movaps %xmm1, %xmm0
|
|
|
|
; SSSE3-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSE41-LABEL: combine_test12:
|
|
|
|
; SSE41: # BB#0:
|
2014-11-04 23:25:08 +00:00
|
|
|
; SSE41-NEXT: blendps {{.*#+}} xmm0 = xmm0[0],xmm1[1,2,3]
|
2014-10-02 07:56:47 +00:00
|
|
|
; SSE41-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_test12:
|
|
|
|
; AVX: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; AVX-NEXT: vblendps {{.*#+}} xmm0 = xmm0[0],xmm1[1,2,3]
|
2014-10-02 07:56:47 +00:00
|
|
|
; AVX-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x float> %a, <4 x float> %b, <4 x i32> <i32 0, i32 5, i32 6, i32 7>
|
|
|
|
%2 = shufflevector <4 x float> %1, <4 x float> %a, <4 x i32> <i32 4, i32 1, i32 2, i32 3>
|
|
|
|
ret <4 x float> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x float> @combine_test13(<4 x float> %a, <4 x float> %b) {
|
|
|
|
; SSE-LABEL: combine_test13:
|
|
|
|
; SSE: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; SSE-NEXT: unpcklpd {{.*#+}} xmm0 = xmm0[0],xmm1[0]
|
2014-10-02 07:56:47 +00:00
|
|
|
; SSE-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_test13:
|
|
|
|
; AVX: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; AVX-NEXT: vunpcklpd {{.*#+}} xmm0 = xmm0[0],xmm1[0]
|
2014-10-02 07:56:47 +00:00
|
|
|
; AVX-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x float> %a, <4 x float> %b, <4 x i32> <i32 0, i32 1, i32 4, i32 5>
|
|
|
|
%2 = shufflevector <4 x float> %1, <4 x float> %a, <4 x i32> <i32 4, i32 5, i32 2, i32 3>
|
|
|
|
ret <4 x float> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x float> @combine_test14(<4 x float> %a, <4 x float> %b) {
|
|
|
|
; SSE-LABEL: combine_test14:
|
|
|
|
; SSE: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; SSE-NEXT: unpckhpd {{.*#+}} xmm0 = xmm0[1],xmm1[1]
|
2014-10-02 07:56:47 +00:00
|
|
|
; SSE-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_test14:
|
|
|
|
; AVX: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; AVX-NEXT: vunpckhpd {{.*#+}} xmm0 = xmm0[1],xmm1[1]
|
2014-10-02 07:56:47 +00:00
|
|
|
; AVX-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x float> %a, <4 x float> %b, <4 x i32> <i32 6, i32 7, i32 5, i32 5>
|
|
|
|
%2 = shufflevector <4 x float> %1, <4 x float> %a, <4 x i32> <i32 6, i32 7, i32 0, i32 1>
|
|
|
|
ret <4 x float> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x float> @combine_test15(<4 x float> %a, <4 x float> %b) {
|
|
|
|
; SSE2-LABEL: combine_test15:
|
|
|
|
; SSE2: # BB#0:
|
2015-02-15 06:37:21 +00:00
|
|
|
; SSE2-NEXT: shufps {{.*#+}} xmm0 = xmm0[1,0],xmm1[0,0]
|
|
|
|
; SSE2-NEXT: shufps {{.*#+}} xmm0 = xmm0[2,0],xmm1[2,3]
|
2014-10-02 07:56:47 +00:00
|
|
|
; SSE2-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSSE3-LABEL: combine_test15:
|
|
|
|
; SSSE3: # BB#0:
|
2015-02-15 06:37:21 +00:00
|
|
|
; SSSE3-NEXT: shufps {{.*#+}} xmm0 = xmm0[1,0],xmm1[0,0]
|
|
|
|
; SSSE3-NEXT: shufps {{.*#+}} xmm0 = xmm0[2,0],xmm1[2,3]
|
2014-10-02 07:56:47 +00:00
|
|
|
; SSSE3-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSE41-LABEL: combine_test15:
|
|
|
|
; SSE41: # BB#0:
|
2014-11-04 23:25:08 +00:00
|
|
|
; SSE41-NEXT: blendps {{.*#+}} xmm0 = xmm1[0],xmm0[1],xmm1[2,3]
|
2014-10-02 07:56:47 +00:00
|
|
|
; SSE41-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_test15:
|
|
|
|
; AVX: # BB#0:
|
|
|
|
; AVX-NEXT: vblendps {{.*#+}} xmm0 = xmm1[0],xmm0[1],xmm1[2,3]
|
|
|
|
; AVX-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x float> %a, <4 x float> %b, <4 x i32> <i32 4, i32 1, i32 6, i32 7>
|
|
|
|
%2 = shufflevector <4 x float> %1, <4 x float> %a, <4 x i32> <i32 0, i32 5, i32 2, i32 3>
|
|
|
|
ret <4 x float> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x i32> @combine_test16(<4 x i32> %a, <4 x i32> %b) {
|
|
|
|
; ALL-LABEL: combine_test16:
|
|
|
|
; ALL: # BB#0:
|
|
|
|
; ALL-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x i32> %a, <4 x i32> %b, <4 x i32> <i32 4, i32 1, i32 6, i32 3>
|
|
|
|
%2 = shufflevector <4 x i32> %1, <4 x i32> %a, <4 x i32> <i32 4, i32 1, i32 6, i32 3>
|
|
|
|
ret <4 x i32> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x i32> @combine_test17(<4 x i32> %a, <4 x i32> %b) {
|
|
|
|
; SSE2-LABEL: combine_test17:
|
|
|
|
; SSE2: # BB#0:
|
2015-02-04 00:58:42 +00:00
|
|
|
; SSE2-NEXT: movss {{.*#+}} xmm1 = xmm0[0],xmm1[1,2,3]
|
2014-10-02 07:56:47 +00:00
|
|
|
; SSE2-NEXT: movaps %xmm1, %xmm0
|
|
|
|
; SSE2-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSSE3-LABEL: combine_test17:
|
|
|
|
; SSSE3: # BB#0:
|
2015-02-04 00:58:42 +00:00
|
|
|
; SSSE3-NEXT: movss {{.*#+}} xmm1 = xmm0[0],xmm1[1,2,3]
|
2014-10-02 07:56:47 +00:00
|
|
|
; SSSE3-NEXT: movaps %xmm1, %xmm0
|
|
|
|
; SSSE3-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSE41-LABEL: combine_test17:
|
|
|
|
; SSE41: # BB#0:
|
2014-11-04 23:25:08 +00:00
|
|
|
; SSE41-NEXT: pblendw {{.*#+}} xmm0 = xmm0[0,1],xmm1[2,3,4,5,6,7]
|
2014-10-02 07:56:47 +00:00
|
|
|
; SSE41-NEXT: retq
|
|
|
|
;
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; AVX1-LABEL: combine_test17:
|
|
|
|
; AVX1: # BB#0:
|
|
|
|
; AVX1-NEXT: vpblendw {{.*#+}} xmm0 = xmm0[0,1],xmm1[2,3,4,5,6,7]
|
|
|
|
; AVX1-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX2-LABEL: combine_test17:
|
|
|
|
; AVX2: # BB#0:
|
|
|
|
; AVX2-NEXT: vpblendd {{.*#+}} xmm0 = xmm0[0],xmm1[1,2,3]
|
|
|
|
; AVX2-NEXT: retq
|
2014-10-02 07:56:47 +00:00
|
|
|
%1 = shufflevector <4 x i32> %a, <4 x i32> %b, <4 x i32> <i32 0, i32 5, i32 6, i32 7>
|
|
|
|
%2 = shufflevector <4 x i32> %1, <4 x i32> %a, <4 x i32> <i32 4, i32 1, i32 2, i32 3>
|
|
|
|
ret <4 x i32> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x i32> @combine_test18(<4 x i32> %a, <4 x i32> %b) {
|
|
|
|
; SSE-LABEL: combine_test18:
|
|
|
|
; SSE: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; SSE-NEXT: punpcklqdq {{.*#+}} xmm0 = xmm0[0],xmm1[0]
|
2014-10-02 07:56:47 +00:00
|
|
|
; SSE-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_test18:
|
|
|
|
; AVX: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; AVX-NEXT: vpunpcklqdq {{.*#+}} xmm0 = xmm0[0],xmm1[0]
|
2014-10-02 07:56:47 +00:00
|
|
|
; AVX-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x i32> %a, <4 x i32> %b, <4 x i32> <i32 0, i32 1, i32 4, i32 5>
|
|
|
|
%2 = shufflevector <4 x i32> %1, <4 x i32> %a, <4 x i32> <i32 4, i32 5, i32 2, i32 3>
|
|
|
|
ret <4 x i32> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x i32> @combine_test19(<4 x i32> %a, <4 x i32> %b) {
|
|
|
|
; SSE-LABEL: combine_test19:
|
|
|
|
; SSE: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; SSE-NEXT: punpckhqdq {{.*#+}} xmm0 = xmm0[1],xmm1[1]
|
2014-10-02 07:56:47 +00:00
|
|
|
; SSE-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_test19:
|
|
|
|
; AVX: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; AVX-NEXT: vpunpckhqdq {{.*#+}} xmm0 = xmm0[1],xmm1[1]
|
2014-10-02 07:56:47 +00:00
|
|
|
; AVX-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x i32> %a, <4 x i32> %b, <4 x i32> <i32 6, i32 7, i32 5, i32 5>
|
|
|
|
%2 = shufflevector <4 x i32> %1, <4 x i32> %a, <4 x i32> <i32 6, i32 7, i32 0, i32 1>
|
|
|
|
ret <4 x i32> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x i32> @combine_test20(<4 x i32> %a, <4 x i32> %b) {
|
|
|
|
; SSE2-LABEL: combine_test20:
|
|
|
|
; SSE2: # BB#0:
|
2015-02-15 06:37:21 +00:00
|
|
|
; SSE2-NEXT: shufps {{.*#+}} xmm0 = xmm0[1,0],xmm1[0,0]
|
|
|
|
; SSE2-NEXT: shufps {{.*#+}} xmm0 = xmm0[2,0],xmm1[2,3]
|
2014-10-02 07:56:47 +00:00
|
|
|
; SSE2-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSSE3-LABEL: combine_test20:
|
|
|
|
; SSSE3: # BB#0:
|
2015-02-15 06:37:21 +00:00
|
|
|
; SSSE3-NEXT: shufps {{.*#+}} xmm0 = xmm0[1,0],xmm1[0,0]
|
|
|
|
; SSSE3-NEXT: shufps {{.*#+}} xmm0 = xmm0[2,0],xmm1[2,3]
|
2014-10-02 07:56:47 +00:00
|
|
|
; SSSE3-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSE41-LABEL: combine_test20:
|
|
|
|
; SSE41: # BB#0:
|
2014-11-04 23:25:08 +00:00
|
|
|
; SSE41-NEXT: pblendw {{.*#+}} xmm0 = xmm1[0,1],xmm0[2,3],xmm1[4,5,6,7]
|
2014-10-02 07:56:47 +00:00
|
|
|
; SSE41-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX1-LABEL: combine_test20:
|
|
|
|
; AVX1: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; AVX1-NEXT: vpblendw {{.*#+}} xmm0 = xmm1[0,1],xmm0[2,3],xmm1[4,5,6,7]
|
2014-10-02 07:56:47 +00:00
|
|
|
; AVX1-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX2-LABEL: combine_test20:
|
|
|
|
; AVX2: # BB#0:
|
|
|
|
; AVX2-NEXT: vpblendd {{.*#+}} xmm0 = xmm1[0],xmm0[1],xmm1[2,3]
|
|
|
|
; AVX2-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x i32> %a, <4 x i32> %b, <4 x i32> <i32 4, i32 1, i32 6, i32 7>
|
|
|
|
%2 = shufflevector <4 x i32> %1, <4 x i32> %a, <4 x i32> <i32 0, i32 5, i32 2, i32 3>
|
|
|
|
ret <4 x i32> %2
|
|
|
|
}
|
|
|
|
|
2014-12-17 12:32:17 +00:00
|
|
|
define <4 x i32> @combine_test21(<8 x i32> %a, <4 x i32>* %ptr) {
|
|
|
|
; SSE-LABEL: combine_test21:
|
|
|
|
; SSE: # BB#0:
|
|
|
|
; SSE-NEXT: movdqa %xmm0, %xmm2
|
2015-02-04 00:58:42 +00:00
|
|
|
; SSE-NEXT: punpcklqdq {{.*#+}} xmm2 = xmm2[0],xmm1[0]
|
|
|
|
; SSE-NEXT: punpckhqdq {{.*#+}} xmm0 = xmm0[1],xmm1[1]
|
|
|
|
; SSE-NEXT: movdqa %xmm2, (%rdi)
|
2014-12-17 12:32:17 +00:00
|
|
|
; SSE-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX1-LABEL: combine_test21:
|
|
|
|
; AVX1: # BB#0:
|
|
|
|
; AVX1-NEXT: vextractf128 $1, %ymm0, %xmm1
|
2015-02-04 00:58:42 +00:00
|
|
|
; AVX1-NEXT: vpunpcklqdq {{.*#+}} xmm2 = xmm0[0],xmm1[0]
|
|
|
|
; AVX1-NEXT: vpunpckhqdq {{.*#+}} xmm0 = xmm0[1],xmm1[1]
|
|
|
|
; AVX1-NEXT: vmovdqa %xmm2, (%rdi)
|
2014-12-17 12:32:17 +00:00
|
|
|
; AVX1-NEXT: vzeroupper
|
|
|
|
; AVX1-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX2-LABEL: combine_test21:
|
|
|
|
; AVX2: # BB#0:
|
|
|
|
; AVX2-NEXT: vextracti128 $1, %ymm0, %xmm1
|
2015-02-04 00:58:42 +00:00
|
|
|
; AVX2-NEXT: vpunpcklqdq {{.*#+}} xmm2 = xmm0[0],xmm1[0]
|
|
|
|
; AVX2-NEXT: vpunpckhqdq {{.*#+}} xmm0 = xmm0[1],xmm1[1]
|
|
|
|
; AVX2-NEXT: vmovdqa %xmm2, (%rdi)
|
2014-12-17 12:32:17 +00:00
|
|
|
; AVX2-NEXT: vzeroupper
|
|
|
|
; AVX2-NEXT: retq
|
|
|
|
%1 = shufflevector <8 x i32> %a, <8 x i32> %a, <4 x i32> <i32 0, i32 1, i32 4, i32 5>
|
|
|
|
%2 = shufflevector <8 x i32> %a, <8 x i32> %a, <4 x i32> <i32 2, i32 3, i32 6, i32 7>
|
|
|
|
store <4 x i32> %1, <4 x i32>* %ptr, align 16
|
|
|
|
ret <4 x i32> %2
|
|
|
|
}
|
2014-10-02 07:56:47 +00:00
|
|
|
|
[DagCombine] Improve DAGCombiner BUILD_VECTOR when it has two sources of elements
This partially fixes PR21943.
For AVX, we go from:
vmovq (%rsi), %xmm0
vmovq (%rdi), %xmm1
vpermilps $-27, %xmm1, %xmm2 ## xmm2 = xmm1[1,1,2,3]
vinsertps $16, %xmm2, %xmm1, %xmm1 ## xmm1 = xmm1[0],xmm2[0],xmm1[2,3]
vinsertps $32, %xmm0, %xmm1, %xmm1 ## xmm1 = xmm1[0,1],xmm0[0],xmm1[3]
vpermilps $-27, %xmm0, %xmm0 ## xmm0 = xmm0[1,1,2,3]
vinsertps $48, %xmm0, %xmm1, %xmm0 ## xmm0 = xmm1[0,1,2],xmm0[0]
To the expected:
vmovq (%rdi), %xmm0
vmovhpd (%rsi), %xmm0, %xmm0
retq
Fixing this for AVX2 is still open.
Differential Revision: http://reviews.llvm.org/D6749
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224759 91177308-0d34-0410-b5e6-96231b3b80d8
2014-12-23 08:59:45 +00:00
|
|
|
define <8 x float> @combine_test22(<2 x float>* %a, <2 x float>* %b) {
|
|
|
|
; SSE-LABEL: combine_test22:
|
|
|
|
; SSE: # BB#0:
|
2015-02-04 00:58:42 +00:00
|
|
|
; SSE-NEXT: movq {{.*#+}} xmm0 = mem[0],zero
|
|
|
|
; SSE-NEXT: movhpd (%rsi), %xmm0
|
[DagCombine] Improve DAGCombiner BUILD_VECTOR when it has two sources of elements
This partially fixes PR21943.
For AVX, we go from:
vmovq (%rsi), %xmm0
vmovq (%rdi), %xmm1
vpermilps $-27, %xmm1, %xmm2 ## xmm2 = xmm1[1,1,2,3]
vinsertps $16, %xmm2, %xmm1, %xmm1 ## xmm1 = xmm1[0],xmm2[0],xmm1[2,3]
vinsertps $32, %xmm0, %xmm1, %xmm1 ## xmm1 = xmm1[0,1],xmm0[0],xmm1[3]
vpermilps $-27, %xmm0, %xmm0 ## xmm0 = xmm0[1,1,2,3]
vinsertps $48, %xmm0, %xmm1, %xmm0 ## xmm0 = xmm1[0,1,2],xmm0[0]
To the expected:
vmovq (%rdi), %xmm0
vmovhpd (%rsi), %xmm0, %xmm0
retq
Fixing this for AVX2 is still open.
Differential Revision: http://reviews.llvm.org/D6749
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224759 91177308-0d34-0410-b5e6-96231b3b80d8
2014-12-23 08:59:45 +00:00
|
|
|
; SSE-NEXT: retq
|
|
|
|
;
|
2015-02-04 00:58:42 +00:00
|
|
|
; AVX-LABEL: combine_test22:
|
|
|
|
; AVX: # BB#0:
|
|
|
|
; AVX-NEXT: vmovq {{.*#+}} xmm0 = mem[0],zero
|
|
|
|
; AVX-NEXT: vmovhpd (%rsi), %xmm0, %xmm0
|
|
|
|
; AVX-NEXT: retq
|
[DagCombine] Improve DAGCombiner BUILD_VECTOR when it has two sources of elements
This partially fixes PR21943.
For AVX, we go from:
vmovq (%rsi), %xmm0
vmovq (%rdi), %xmm1
vpermilps $-27, %xmm1, %xmm2 ## xmm2 = xmm1[1,1,2,3]
vinsertps $16, %xmm2, %xmm1, %xmm1 ## xmm1 = xmm1[0],xmm2[0],xmm1[2,3]
vinsertps $32, %xmm0, %xmm1, %xmm1 ## xmm1 = xmm1[0,1],xmm0[0],xmm1[3]
vpermilps $-27, %xmm0, %xmm0 ## xmm0 = xmm0[1,1,2,3]
vinsertps $48, %xmm0, %xmm1, %xmm0 ## xmm0 = xmm1[0,1,2],xmm0[0]
To the expected:
vmovq (%rdi), %xmm0
vmovhpd (%rsi), %xmm0, %xmm0
retq
Fixing this for AVX2 is still open.
Differential Revision: http://reviews.llvm.org/D6749
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224759 91177308-0d34-0410-b5e6-96231b3b80d8
2014-12-23 08:59:45 +00:00
|
|
|
; Current AVX2 lowering of this is still awful, not adding a test case.
|
|
|
|
%1 = load <2 x float>* %a, align 8
|
|
|
|
%2 = load <2 x float>* %b, align 8
|
|
|
|
%3 = shufflevector <2 x float> %1, <2 x float> %2, <8 x i32> <i32 0, i32 1, i32 2, i32 3, i32 undef, i32 undef, i32 undef, i32 undef>
|
|
|
|
ret <8 x float> %3
|
|
|
|
}
|
|
|
|
|
2014-10-02 07:56:47 +00:00
|
|
|
; Check some negative cases.
|
|
|
|
; FIXME: Do any of these really make sense? Are they redundant with the above tests?
|
|
|
|
|
|
|
|
define <4 x float> @combine_test1b(<4 x float> %a, <4 x float> %b) {
|
2014-12-07 17:15:56 +00:00
|
|
|
; SSE-LABEL: combine_test1b:
|
|
|
|
; SSE: # BB#0:
|
|
|
|
; SSE-NEXT: shufps {{.*#+}} xmm1 = xmm1[0,1,2,0]
|
|
|
|
; SSE-NEXT: movaps %xmm1, %xmm0
|
|
|
|
; SSE-NEXT: retq
|
2014-10-02 07:56:47 +00:00
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_test1b:
|
|
|
|
; AVX: # BB#0:
|
2014-11-11 11:20:31 +00:00
|
|
|
; AVX-NEXT: vpermilps {{.*#+}} xmm0 = xmm1[0,1,2,0]
|
2014-10-02 07:56:47 +00:00
|
|
|
; AVX-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x float> %a, <4 x float> %b, <4 x i32> <i32 4, i32 1, i32 6, i32 3>
|
|
|
|
%2 = shufflevector <4 x float> %1, <4 x float> %b, <4 x i32> <i32 0, i32 5, i32 2, i32 0>
|
|
|
|
ret <4 x float> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x float> @combine_test2b(<4 x float> %a, <4 x float> %b) {
|
|
|
|
; SSE2-LABEL: combine_test2b:
|
|
|
|
; SSE2: # BB#0:
|
2014-11-15 21:13:05 +00:00
|
|
|
; SSE2-NEXT: movlhps {{.*#+}} xmm1 = xmm1[0,0]
|
|
|
|
; SSE2-NEXT: movaps %xmm1, %xmm0
|
2014-10-02 07:56:47 +00:00
|
|
|
; SSE2-NEXT: retq
|
2015-02-04 00:58:42 +00:00
|
|
|
;
|
|
|
|
; SSSE3-LABEL: combine_test2b:
|
|
|
|
; SSSE3: # BB#0:
|
|
|
|
; SSSE3-NEXT: movddup {{.*#+}} xmm0 = xmm1[0,0]
|
|
|
|
; SSSE3-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSE41-LABEL: combine_test2b:
|
|
|
|
; SSE41: # BB#0:
|
|
|
|
; SSE41-NEXT: movddup {{.*#+}} xmm0 = xmm1[0,0]
|
|
|
|
; SSE41-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_test2b:
|
|
|
|
; AVX: # BB#0:
|
|
|
|
; AVX-NEXT: vmovddup {{.*#+}} xmm0 = xmm1[0,0]
|
|
|
|
; AVX-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x float> %a, <4 x float> %b, <4 x i32> <i32 4, i32 1, i32 6, i32 3>
|
|
|
|
%2 = shufflevector <4 x float> %1, <4 x float> %b, <4 x i32> <i32 0, i32 5, i32 0, i32 5>
|
2014-10-02 07:56:47 +00:00
|
|
|
ret <4 x float> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x float> @combine_test3b(<4 x float> %a, <4 x float> %b) {
|
2015-02-15 08:26:30 +00:00
|
|
|
; SSE2-LABEL: combine_test3b:
|
|
|
|
; SSE2: # BB#0:
|
|
|
|
; SSE2-NEXT: shufps {{.*#+}} xmm0 = xmm0[0,0],xmm1[3,0]
|
|
|
|
; SSE2-NEXT: shufps {{.*#+}} xmm0 = xmm0[0,2],xmm1[2,3]
|
|
|
|
; SSE2-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSSE3-LABEL: combine_test3b:
|
|
|
|
; SSSE3: # BB#0:
|
|
|
|
; SSSE3-NEXT: shufps {{.*#+}} xmm0 = xmm0[0,0],xmm1[3,0]
|
|
|
|
; SSSE3-NEXT: shufps {{.*#+}} xmm0 = xmm0[0,2],xmm1[2,3]
|
|
|
|
; SSSE3-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSE41-LABEL: combine_test3b:
|
|
|
|
; SSE41: # BB#0:
|
|
|
|
; SSE41-NEXT: blendpd {{.*#+}} xmm0 = xmm0[0],xmm1[1]
|
|
|
|
; SSE41-NEXT: shufps {{.*#+}} xmm0 = xmm0[0,3,2,3]
|
|
|
|
; SSE41-NEXT: retq
|
2014-10-02 07:56:47 +00:00
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_test3b:
|
|
|
|
; AVX: # BB#0:
|
2015-02-15 08:26:30 +00:00
|
|
|
; AVX-NEXT: vblendpd {{.*#+}} xmm0 = xmm0[0],xmm1[1]
|
|
|
|
; AVX-NEXT: vpermilps {{.*#+}} xmm0 = xmm0[0,3,2,3]
|
2014-10-02 07:56:47 +00:00
|
|
|
; AVX-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x float> %a, <4 x float> %b, <4 x i32> <i32 0, i32 0, i32 6, i32 3>
|
|
|
|
%2 = shufflevector <4 x float> %1, <4 x float> %b, <4 x i32> <i32 0, i32 7, i32 2, i32 7>
|
|
|
|
ret <4 x float> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x float> @combine_test4b(<4 x float> %a, <4 x float> %b) {
|
2014-12-07 17:15:56 +00:00
|
|
|
; SSE-LABEL: combine_test4b:
|
|
|
|
; SSE: # BB#0:
|
|
|
|
; SSE-NEXT: shufps {{.*#+}} xmm1 = xmm1[1,1,2,3]
|
|
|
|
; SSE-NEXT: movaps %xmm1, %xmm0
|
|
|
|
; SSE-NEXT: retq
|
2014-10-02 07:56:47 +00:00
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_test4b:
|
|
|
|
; AVX: # BB#0:
|
2014-11-11 11:20:31 +00:00
|
|
|
; AVX-NEXT: vpermilps {{.*#+}} xmm0 = xmm1[1,1,2,3]
|
2014-10-02 07:56:47 +00:00
|
|
|
; AVX-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x float> %a, <4 x float> %b, <4 x i32> <i32 4, i32 1, i32 6, i32 3>
|
|
|
|
%2 = shufflevector <4 x float> %1, <4 x float> %b, <4 x i32> <i32 5, i32 5, i32 2, i32 7>
|
|
|
|
ret <4 x float> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
; Verify that we correctly fold shuffles even when we use illegal vector types.
|
|
|
|
|
|
|
|
define <4 x i8> @combine_test1c(<4 x i8>* %a, <4 x i8>* %b) {
|
|
|
|
; SSE2-LABEL: combine_test1c:
|
|
|
|
; SSE2: # BB#0:
|
2015-02-04 00:58:42 +00:00
|
|
|
; SSE2-NEXT: movd {{.*#+}} xmm1 = mem[0],zero,zero,zero
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; SSE2-NEXT: punpcklbw {{.*#+}} xmm1 = xmm1[0],xmm0[0],xmm1[1],xmm0[1],xmm1[2],xmm0[2],xmm1[3],xmm0[3],xmm1[4],xmm0[4],xmm1[5],xmm0[5],xmm1[6],xmm0[6],xmm1[7],xmm0[7]
|
|
|
|
; SSE2-NEXT: punpcklwd {{.*#+}} xmm1 = xmm1[0],xmm0[0],xmm1[1],xmm0[1],xmm1[2],xmm0[2],xmm1[3],xmm0[3]
|
2015-02-04 00:58:42 +00:00
|
|
|
; SSE2-NEXT: movd {{.*#+}} xmm0 = mem[0],zero,zero,zero
|
[DAG] Improved target independent vector shuffle folding logic.
This patch teaches the DAGCombiner how to combine shuffles according to rules:
shuffle(shuffle(A, Undef, M0), B, M1) -> shuffle(B, A, M2)
shuffle(shuffle(A, B, M0), B, M1) -> shuffle(B, A, M2)
shuffle(shuffle(A, B, M0), A, M1) -> shuffle(B, A, M2)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222090 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-15 22:56:25 +00:00
|
|
|
; SSE2-NEXT: punpcklbw {{.*#+}} xmm0 = xmm0[0,0,1,1,2,2,3,3,4,4,5,5,6,6,7,7]
|
|
|
|
; SSE2-NEXT: punpcklwd {{.*#+}} xmm0 = xmm0[0,0,1,1,2,2,3,3]
|
2015-02-04 00:58:42 +00:00
|
|
|
; SSE2-NEXT: movss {{.*#+}} xmm0 = xmm1[0],xmm0[1,2,3]
|
2014-10-02 07:56:47 +00:00
|
|
|
; SSE2-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSSE3-LABEL: combine_test1c:
|
|
|
|
; SSSE3: # BB#0:
|
2015-02-04 00:58:42 +00:00
|
|
|
; SSSE3-NEXT: movd {{.*#+}} xmm1 = mem[0],zero,zero,zero
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; SSSE3-NEXT: punpcklbw {{.*#+}} xmm1 = xmm1[0],xmm0[0],xmm1[1],xmm0[1],xmm1[2],xmm0[2],xmm1[3],xmm0[3],xmm1[4],xmm0[4],xmm1[5],xmm0[5],xmm1[6],xmm0[6],xmm1[7],xmm0[7]
|
|
|
|
; SSSE3-NEXT: punpcklwd {{.*#+}} xmm1 = xmm1[0],xmm0[0],xmm1[1],xmm0[1],xmm1[2],xmm0[2],xmm1[3],xmm0[3]
|
2015-02-04 00:58:42 +00:00
|
|
|
; SSSE3-NEXT: movd {{.*#+}} xmm0 = mem[0],zero,zero,zero
|
[DAG] Improved target independent vector shuffle folding logic.
This patch teaches the DAGCombiner how to combine shuffles according to rules:
shuffle(shuffle(A, Undef, M0), B, M1) -> shuffle(B, A, M2)
shuffle(shuffle(A, B, M0), B, M1) -> shuffle(B, A, M2)
shuffle(shuffle(A, B, M0), A, M1) -> shuffle(B, A, M2)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222090 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-15 22:56:25 +00:00
|
|
|
; SSSE3-NEXT: punpcklbw {{.*#+}} xmm0 = xmm0[0,0,1,1,2,2,3,3,4,4,5,5,6,6,7,7]
|
|
|
|
; SSSE3-NEXT: punpcklwd {{.*#+}} xmm0 = xmm0[0,0,1,1,2,2,3,3]
|
2015-02-04 00:58:42 +00:00
|
|
|
; SSSE3-NEXT: movss {{.*#+}} xmm0 = xmm1[0],xmm0[1,2,3]
|
2014-10-02 07:56:47 +00:00
|
|
|
; SSSE3-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSE41-LABEL: combine_test1c:
|
|
|
|
; SSE41: # BB#0:
|
2015-02-04 00:58:42 +00:00
|
|
|
; SSE41-NEXT: pmovzxbd {{.*#+}} xmm1 = mem[0],zero,zero,zero,mem[1],zero,zero,zero,mem[2],zero,zero,zero,mem[3],zero,zero,zero
|
|
|
|
; SSE41-NEXT: pmovzxbd {{.*#+}} xmm0 = mem[0],zero,zero,zero,mem[1],zero,zero,zero,mem[2],zero,zero,zero,mem[3],zero,zero,zero
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; SSE41-NEXT: pblendw {{.*#+}} xmm0 = xmm1[0,1],xmm0[2,3,4,5,6,7]
|
2014-10-02 07:56:47 +00:00
|
|
|
; SSE41-NEXT: retq
|
|
|
|
;
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; AVX1-LABEL: combine_test1c:
|
|
|
|
; AVX1: # BB#0:
|
2015-02-04 00:58:42 +00:00
|
|
|
; AVX1-NEXT: vpmovzxbd {{.*#+}} xmm0 = mem[0],zero,zero,zero,mem[1],zero,zero,zero,mem[2],zero,zero,zero,mem[3],zero,zero,zero
|
|
|
|
; AVX1-NEXT: vpmovzxbd {{.*#+}} xmm1 = mem[0],zero,zero,zero,mem[1],zero,zero,zero,mem[2],zero,zero,zero,mem[3],zero,zero,zero
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; AVX1-NEXT: vpblendw {{.*#+}} xmm0 = xmm0[0,1],xmm1[2,3,4,5,6,7]
|
|
|
|
; AVX1-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX2-LABEL: combine_test1c:
|
|
|
|
; AVX2: # BB#0:
|
2015-02-04 00:58:42 +00:00
|
|
|
; AVX2-NEXT: vpmovzxbd {{.*#+}} xmm0 = mem[0],zero,zero,zero,mem[1],zero,zero,zero,mem[2],zero,zero,zero,mem[3],zero,zero,zero
|
|
|
|
; AVX2-NEXT: vpmovzxbd {{.*#+}} xmm1 = mem[0],zero,zero,zero,mem[1],zero,zero,zero,mem[2],zero,zero,zero,mem[3],zero,zero,zero
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; AVX2-NEXT: vpblendd {{.*#+}} xmm0 = xmm0[0],xmm1[1,2,3]
|
|
|
|
; AVX2-NEXT: retq
|
2014-10-02 07:56:47 +00:00
|
|
|
%A = load <4 x i8>* %a
|
|
|
|
%B = load <4 x i8>* %b
|
|
|
|
%1 = shufflevector <4 x i8> %A, <4 x i8> %B, <4 x i32> <i32 0, i32 5, i32 2, i32 7>
|
|
|
|
%2 = shufflevector <4 x i8> %1, <4 x i8> %B, <4 x i32> <i32 0, i32 1, i32 6, i32 3>
|
|
|
|
ret <4 x i8> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x i8> @combine_test2c(<4 x i8>* %a, <4 x i8>* %b) {
|
|
|
|
; SSE2-LABEL: combine_test2c:
|
|
|
|
; SSE2: # BB#0:
|
2015-02-04 00:58:42 +00:00
|
|
|
; SSE2-NEXT: movd {{.*#+}} xmm0 = mem[0],zero,zero,zero
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; SSE2-NEXT: punpcklbw {{.*#+}} xmm0 = xmm0[0,0,1,1,2,2,3,3,4,4,5,5,6,6,7,7]
|
|
|
|
; SSE2-NEXT: punpcklwd {{.*#+}} xmm0 = xmm0[0,0,1,1,2,2,3,3]
|
2015-02-04 00:58:42 +00:00
|
|
|
; SSE2-NEXT: movd {{.*#+}} xmm1 = mem[0],zero,zero,zero
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; SSE2-NEXT: punpcklbw {{.*#+}} xmm1 = xmm1[0],xmm0[0],xmm1[1],xmm0[1],xmm1[2],xmm0[2],xmm1[3],xmm0[3],xmm1[4],xmm0[4],xmm1[5],xmm0[5],xmm1[6],xmm0[6],xmm1[7],xmm0[7]
|
|
|
|
; SSE2-NEXT: punpcklwd {{.*#+}} xmm1 = xmm1[0],xmm0[0],xmm1[1],xmm0[1],xmm1[2],xmm0[2],xmm1[3],xmm0[3]
|
|
|
|
; SSE2-NEXT: punpcklqdq {{.*#+}} xmm0 = xmm0[0],xmm1[0]
|
2014-10-02 07:56:47 +00:00
|
|
|
; SSE2-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSSE3-LABEL: combine_test2c:
|
|
|
|
; SSSE3: # BB#0:
|
2015-02-04 00:58:42 +00:00
|
|
|
; SSSE3-NEXT: movd {{.*#+}} xmm0 = mem[0],zero,zero,zero
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; SSSE3-NEXT: punpcklbw {{.*#+}} xmm0 = xmm0[0,0,1,1,2,2,3,3,4,4,5,5,6,6,7,7]
|
|
|
|
; SSSE3-NEXT: punpcklwd {{.*#+}} xmm0 = xmm0[0,0,1,1,2,2,3,3]
|
2015-02-04 00:58:42 +00:00
|
|
|
; SSSE3-NEXT: movd {{.*#+}} xmm1 = mem[0],zero,zero,zero
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; SSSE3-NEXT: punpcklbw {{.*#+}} xmm1 = xmm1[0],xmm0[0],xmm1[1],xmm0[1],xmm1[2],xmm0[2],xmm1[3],xmm0[3],xmm1[4],xmm0[4],xmm1[5],xmm0[5],xmm1[6],xmm0[6],xmm1[7],xmm0[7]
|
|
|
|
; SSSE3-NEXT: punpcklwd {{.*#+}} xmm1 = xmm1[0],xmm0[0],xmm1[1],xmm0[1],xmm1[2],xmm0[2],xmm1[3],xmm0[3]
|
|
|
|
; SSSE3-NEXT: punpcklqdq {{.*#+}} xmm0 = xmm0[0],xmm1[0]
|
2014-10-02 07:56:47 +00:00
|
|
|
; SSSE3-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSE41-LABEL: combine_test2c:
|
|
|
|
; SSE41: # BB#0:
|
2015-02-04 00:58:42 +00:00
|
|
|
; SSE41-NEXT: pmovzxbd {{.*#+}} xmm0 = mem[0],zero,zero,zero,mem[1],zero,zero,zero,mem[2],zero,zero,zero,mem[3],zero,zero,zero
|
|
|
|
; SSE41-NEXT: pmovzxbd {{.*#+}} xmm1 = mem[0],zero,zero,zero,mem[1],zero,zero,zero,mem[2],zero,zero,zero,mem[3],zero,zero,zero
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; SSE41-NEXT: punpcklqdq {{.*#+}} xmm0 = xmm0[0],xmm1[0]
|
2014-10-02 07:56:47 +00:00
|
|
|
; SSE41-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_test2c:
|
|
|
|
; AVX: # BB#0:
|
2015-02-04 00:58:42 +00:00
|
|
|
; AVX-NEXT: vpmovzxbd {{.*#+}} xmm0 = mem[0],zero,zero,zero,mem[1],zero,zero,zero,mem[2],zero,zero,zero,mem[3],zero,zero,zero
|
|
|
|
; AVX-NEXT: vpmovzxbd {{.*#+}} xmm1 = mem[0],zero,zero,zero,mem[1],zero,zero,zero,mem[2],zero,zero,zero,mem[3],zero,zero,zero
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; AVX-NEXT: vpunpcklqdq {{.*#+}} xmm0 = xmm0[0],xmm1[0]
|
2014-10-02 07:56:47 +00:00
|
|
|
; AVX-NEXT: retq
|
|
|
|
%A = load <4 x i8>* %a
|
|
|
|
%B = load <4 x i8>* %b
|
|
|
|
%1 = shufflevector <4 x i8> %A, <4 x i8> %B, <4 x i32> <i32 0, i32 5, i32 1, i32 5>
|
|
|
|
%2 = shufflevector <4 x i8> %1, <4 x i8> %B, <4 x i32> <i32 0, i32 2, i32 4, i32 1>
|
|
|
|
ret <4 x i8> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x i8> @combine_test3c(<4 x i8>* %a, <4 x i8>* %b) {
|
|
|
|
; SSE2-LABEL: combine_test3c:
|
|
|
|
; SSE2: # BB#0:
|
2015-02-04 00:58:42 +00:00
|
|
|
; SSE2-NEXT: movd {{.*#+}} xmm1 = mem[0],zero,zero,zero
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; SSE2-NEXT: punpcklbw {{.*#+}} xmm1 = xmm1[0],xmm0[0],xmm1[1],xmm0[1],xmm1[2],xmm0[2],xmm1[3],xmm0[3],xmm1[4],xmm0[4],xmm1[5],xmm0[5],xmm1[6],xmm0[6],xmm1[7],xmm0[7]
|
|
|
|
; SSE2-NEXT: punpcklwd {{.*#+}} xmm1 = xmm1[0],xmm0[0],xmm1[1],xmm0[1],xmm1[2],xmm0[2],xmm1[3],xmm0[3]
|
2015-02-04 00:58:42 +00:00
|
|
|
; SSE2-NEXT: movd {{.*#+}} xmm0 = mem[0],zero,zero,zero
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; SSE2-NEXT: punpcklbw {{.*#+}} xmm0 = xmm0[0,0,1,1,2,2,3,3,4,4,5,5,6,6,7,7]
|
|
|
|
; SSE2-NEXT: punpcklwd {{.*#+}} xmm0 = xmm0[0,0,1,1,2,2,3,3]
|
|
|
|
; SSE2-NEXT: punpckhqdq {{.*#+}} xmm0 = xmm0[1],xmm1[1]
|
2014-10-02 07:56:47 +00:00
|
|
|
; SSE2-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSSE3-LABEL: combine_test3c:
|
|
|
|
; SSSE3: # BB#0:
|
2015-02-04 00:58:42 +00:00
|
|
|
; SSSE3-NEXT: movd {{.*#+}} xmm1 = mem[0],zero,zero,zero
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; SSSE3-NEXT: punpcklbw {{.*#+}} xmm1 = xmm1[0],xmm0[0],xmm1[1],xmm0[1],xmm1[2],xmm0[2],xmm1[3],xmm0[3],xmm1[4],xmm0[4],xmm1[5],xmm0[5],xmm1[6],xmm0[6],xmm1[7],xmm0[7]
|
|
|
|
; SSSE3-NEXT: punpcklwd {{.*#+}} xmm1 = xmm1[0],xmm0[0],xmm1[1],xmm0[1],xmm1[2],xmm0[2],xmm1[3],xmm0[3]
|
2015-02-04 00:58:42 +00:00
|
|
|
; SSSE3-NEXT: movd {{.*#+}} xmm0 = mem[0],zero,zero,zero
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; SSSE3-NEXT: punpcklbw {{.*#+}} xmm0 = xmm0[0,0,1,1,2,2,3,3,4,4,5,5,6,6,7,7]
|
|
|
|
; SSSE3-NEXT: punpcklwd {{.*#+}} xmm0 = xmm0[0,0,1,1,2,2,3,3]
|
|
|
|
; SSSE3-NEXT: punpckhqdq {{.*#+}} xmm0 = xmm0[1],xmm1[1]
|
2014-10-02 07:56:47 +00:00
|
|
|
; SSSE3-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSE41-LABEL: combine_test3c:
|
|
|
|
; SSE41: # BB#0:
|
2015-02-04 00:58:42 +00:00
|
|
|
; SSE41-NEXT: pmovzxbd {{.*#+}} xmm1 = mem[0],zero,zero,zero,mem[1],zero,zero,zero,mem[2],zero,zero,zero,mem[3],zero,zero,zero
|
|
|
|
; SSE41-NEXT: pmovzxbd {{.*#+}} xmm0 = mem[0],zero,zero,zero,mem[1],zero,zero,zero,mem[2],zero,zero,zero,mem[3],zero,zero,zero
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; SSE41-NEXT: punpckhqdq {{.*#+}} xmm0 = xmm0[1],xmm1[1]
|
2014-10-02 07:56:47 +00:00
|
|
|
; SSE41-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_test3c:
|
|
|
|
; AVX: # BB#0:
|
2015-02-04 00:58:42 +00:00
|
|
|
; AVX-NEXT: vpmovzxbd {{.*#+}} xmm0 = mem[0],zero,zero,zero,mem[1],zero,zero,zero,mem[2],zero,zero,zero,mem[3],zero,zero,zero
|
|
|
|
; AVX-NEXT: vpmovzxbd {{.*#+}} xmm1 = mem[0],zero,zero,zero,mem[1],zero,zero,zero,mem[2],zero,zero,zero,mem[3],zero,zero,zero
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; AVX-NEXT: vpunpckhqdq {{.*#+}} xmm0 = xmm1[1],xmm0[1]
|
2014-10-02 07:56:47 +00:00
|
|
|
; AVX-NEXT: retq
|
|
|
|
%A = load <4 x i8>* %a
|
|
|
|
%B = load <4 x i8>* %b
|
|
|
|
%1 = shufflevector <4 x i8> %A, <4 x i8> %B, <4 x i32> <i32 2, i32 3, i32 5, i32 5>
|
|
|
|
%2 = shufflevector <4 x i8> %1, <4 x i8> %B, <4 x i32> <i32 6, i32 7, i32 0, i32 1>
|
|
|
|
ret <4 x i8> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x i8> @combine_test4c(<4 x i8>* %a, <4 x i8>* %b) {
|
|
|
|
; SSE2-LABEL: combine_test4c:
|
|
|
|
; SSE2: # BB#0:
|
2015-02-15 06:37:21 +00:00
|
|
|
; SSE2-NEXT: movd {{.*#+}} xmm0 = mem[0],zero,zero,zero
|
|
|
|
; SSE2-NEXT: punpcklbw {{.*#+}} xmm0 = xmm0[0,0,1,1,2,2,3,3,4,4,5,5,6,6,7,7]
|
|
|
|
; SSE2-NEXT: punpcklwd {{.*#+}} xmm0 = xmm0[0,0,1,1,2,2,3,3]
|
2015-02-04 00:58:42 +00:00
|
|
|
; SSE2-NEXT: movd {{.*#+}} xmm1 = mem[0],zero,zero,zero
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; SSE2-NEXT: punpcklbw {{.*#+}} xmm1 = xmm1[0],xmm0[0],xmm1[1],xmm0[1],xmm1[2],xmm0[2],xmm1[3],xmm0[3],xmm1[4],xmm0[4],xmm1[5],xmm0[5],xmm1[6],xmm0[6],xmm1[7],xmm0[7]
|
|
|
|
; SSE2-NEXT: punpcklwd {{.*#+}} xmm1 = xmm1[0],xmm0[0],xmm1[1],xmm0[1],xmm1[2],xmm0[2],xmm1[3],xmm0[3]
|
2015-02-15 06:37:21 +00:00
|
|
|
; SSE2-NEXT: shufps {{.*#+}} xmm0 = xmm0[1,0],xmm1[0,0]
|
|
|
|
; SSE2-NEXT: shufps {{.*#+}} xmm0 = xmm0[2,0],xmm1[2,3]
|
2014-10-02 07:56:47 +00:00
|
|
|
; SSE2-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSSE3-LABEL: combine_test4c:
|
|
|
|
; SSSE3: # BB#0:
|
2015-02-15 06:37:21 +00:00
|
|
|
; SSSE3-NEXT: movd {{.*#+}} xmm0 = mem[0],zero,zero,zero
|
|
|
|
; SSSE3-NEXT: punpcklbw {{.*#+}} xmm0 = xmm0[0,0,1,1,2,2,3,3,4,4,5,5,6,6,7,7]
|
|
|
|
; SSSE3-NEXT: punpcklwd {{.*#+}} xmm0 = xmm0[0,0,1,1,2,2,3,3]
|
2015-02-04 00:58:42 +00:00
|
|
|
; SSSE3-NEXT: movd {{.*#+}} xmm1 = mem[0],zero,zero,zero
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; SSSE3-NEXT: punpcklbw {{.*#+}} xmm1 = xmm1[0],xmm0[0],xmm1[1],xmm0[1],xmm1[2],xmm0[2],xmm1[3],xmm0[3],xmm1[4],xmm0[4],xmm1[5],xmm0[5],xmm1[6],xmm0[6],xmm1[7],xmm0[7]
|
|
|
|
; SSSE3-NEXT: punpcklwd {{.*#+}} xmm1 = xmm1[0],xmm0[0],xmm1[1],xmm0[1],xmm1[2],xmm0[2],xmm1[3],xmm0[3]
|
2015-02-15 06:37:21 +00:00
|
|
|
; SSSE3-NEXT: shufps {{.*#+}} xmm0 = xmm0[1,0],xmm1[0,0]
|
|
|
|
; SSSE3-NEXT: shufps {{.*#+}} xmm0 = xmm0[2,0],xmm1[2,3]
|
2014-10-02 07:56:47 +00:00
|
|
|
; SSSE3-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSE41-LABEL: combine_test4c:
|
|
|
|
; SSE41: # BB#0:
|
2015-02-04 00:58:42 +00:00
|
|
|
; SSE41-NEXT: pmovzxbd {{.*#+}} xmm1 = mem[0],zero,zero,zero,mem[1],zero,zero,zero,mem[2],zero,zero,zero,mem[3],zero,zero,zero
|
|
|
|
; SSE41-NEXT: pmovzxbd {{.*#+}} xmm0 = mem[0],zero,zero,zero,mem[1],zero,zero,zero,mem[2],zero,zero,zero,mem[3],zero,zero,zero
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; SSE41-NEXT: pblendw {{.*#+}} xmm0 = xmm0[0,1],xmm1[2,3],xmm0[4,5,6,7]
|
2014-10-02 07:56:47 +00:00
|
|
|
; SSE41-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX1-LABEL: combine_test4c:
|
|
|
|
; AVX1: # BB#0:
|
2015-02-04 00:58:42 +00:00
|
|
|
; AVX1-NEXT: vpmovzxbd {{.*#+}} xmm0 = mem[0],zero,zero,zero,mem[1],zero,zero,zero,mem[2],zero,zero,zero,mem[3],zero,zero,zero
|
|
|
|
; AVX1-NEXT: vpmovzxbd {{.*#+}} xmm1 = mem[0],zero,zero,zero,mem[1],zero,zero,zero,mem[2],zero,zero,zero,mem[3],zero,zero,zero
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; AVX1-NEXT: vpblendw {{.*#+}} xmm0 = xmm1[0,1],xmm0[2,3],xmm1[4,5,6,7]
|
2014-10-02 07:56:47 +00:00
|
|
|
; AVX1-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX2-LABEL: combine_test4c:
|
|
|
|
; AVX2: # BB#0:
|
2015-02-04 00:58:42 +00:00
|
|
|
; AVX2-NEXT: vpmovzxbd {{.*#+}} xmm0 = mem[0],zero,zero,zero,mem[1],zero,zero,zero,mem[2],zero,zero,zero,mem[3],zero,zero,zero
|
|
|
|
; AVX2-NEXT: vpmovzxbd {{.*#+}} xmm1 = mem[0],zero,zero,zero,mem[1],zero,zero,zero,mem[2],zero,zero,zero,mem[3],zero,zero,zero
|
2014-10-02 07:56:47 +00:00
|
|
|
; AVX2-NEXT: vpblendd {{.*#+}} xmm0 = xmm1[0],xmm0[1],xmm1[2,3]
|
|
|
|
; AVX2-NEXT: retq
|
|
|
|
%A = load <4 x i8>* %a
|
|
|
|
%B = load <4 x i8>* %b
|
|
|
|
%1 = shufflevector <4 x i8> %A, <4 x i8> %B, <4 x i32> <i32 4, i32 1, i32 6, i32 3>
|
|
|
|
%2 = shufflevector <4 x i8> %1, <4 x i8> %B, <4 x i32> <i32 0, i32 1, i32 2, i32 7>
|
|
|
|
ret <4 x i8> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
; The following test cases are generated from this C++ code
|
|
|
|
;
|
|
|
|
;__m128 blend_01(__m128 a, __m128 b)
|
|
|
|
;{
|
|
|
|
; __m128 s = a;
|
|
|
|
; s = _mm_blend_ps( s, b, 1<<0 );
|
|
|
|
; s = _mm_blend_ps( s, b, 1<<1 );
|
|
|
|
; return s;
|
|
|
|
;}
|
|
|
|
;
|
|
|
|
;__m128 blend_02(__m128 a, __m128 b)
|
|
|
|
;{
|
|
|
|
; __m128 s = a;
|
|
|
|
; s = _mm_blend_ps( s, b, 1<<0 );
|
|
|
|
; s = _mm_blend_ps( s, b, 1<<2 );
|
|
|
|
; return s;
|
|
|
|
;}
|
|
|
|
;
|
|
|
|
;__m128 blend_123(__m128 a, __m128 b)
|
|
|
|
;{
|
|
|
|
; __m128 s = a;
|
|
|
|
; s = _mm_blend_ps( s, b, 1<<1 );
|
|
|
|
; s = _mm_blend_ps( s, b, 1<<2 );
|
|
|
|
; s = _mm_blend_ps( s, b, 1<<3 );
|
|
|
|
; return s;
|
|
|
|
;}
|
|
|
|
|
|
|
|
; Ideally, we should collapse the following shuffles into a single one.
|
|
|
|
|
|
|
|
define <4 x float> @combine_blend_01(<4 x float> %a, <4 x float> %b) {
|
|
|
|
; SSE2-LABEL: combine_blend_01:
|
|
|
|
; SSE2: # BB#0:
|
2015-02-04 00:58:42 +00:00
|
|
|
; SSE2-NEXT: movsd {{.*#+}} xmm0 = xmm1[0],xmm0[1]
|
2014-10-02 07:56:47 +00:00
|
|
|
; SSE2-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSSE3-LABEL: combine_blend_01:
|
|
|
|
; SSSE3: # BB#0:
|
2015-02-04 00:58:42 +00:00
|
|
|
; SSSE3-NEXT: movsd {{.*#+}} xmm0 = xmm1[0],xmm0[1]
|
2014-10-02 07:56:47 +00:00
|
|
|
; SSSE3-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSE41-LABEL: combine_blend_01:
|
|
|
|
; SSE41: # BB#0:
|
2014-11-04 23:25:08 +00:00
|
|
|
; SSE41-NEXT: blendpd {{.*#+}} xmm0 = xmm1[0],xmm0[1]
|
2014-10-02 07:56:47 +00:00
|
|
|
; SSE41-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_blend_01:
|
|
|
|
; AVX: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; AVX-NEXT: vblendpd {{.*#+}} xmm0 = xmm1[0],xmm0[1]
|
2014-10-02 07:56:47 +00:00
|
|
|
; AVX-NEXT: retq
|
|
|
|
%shuffle = shufflevector <4 x float> %a, <4 x float> %b, <4 x i32> <i32 4, i32 undef, i32 2, i32 3>
|
|
|
|
%shuffle6 = shufflevector <4 x float> %shuffle, <4 x float> %b, <4 x i32> <i32 0, i32 5, i32 2, i32 3>
|
|
|
|
ret <4 x float> %shuffle6
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x float> @combine_blend_02(<4 x float> %a, <4 x float> %b) {
|
|
|
|
; SSE2-LABEL: combine_blend_02:
|
|
|
|
; SSE2: # BB#0:
|
2015-02-15 06:37:21 +00:00
|
|
|
; SSE2-NEXT: shufps {{.*#+}} xmm1 = xmm1[0,2],xmm0[1,3]
|
|
|
|
; SSE2-NEXT: shufps {{.*#+}} xmm1 = xmm1[0,2,1,3]
|
|
|
|
; SSE2-NEXT: movaps %xmm1, %xmm0
|
2014-10-02 07:56:47 +00:00
|
|
|
; SSE2-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSSE3-LABEL: combine_blend_02:
|
|
|
|
; SSSE3: # BB#0:
|
2015-02-15 06:37:21 +00:00
|
|
|
; SSSE3-NEXT: shufps {{.*#+}} xmm1 = xmm1[0,2],xmm0[1,3]
|
|
|
|
; SSSE3-NEXT: shufps {{.*#+}} xmm1 = xmm1[0,2,1,3]
|
|
|
|
; SSSE3-NEXT: movaps %xmm1, %xmm0
|
2014-10-02 07:56:47 +00:00
|
|
|
; SSSE3-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSE41-LABEL: combine_blend_02:
|
|
|
|
; SSE41: # BB#0:
|
2014-11-04 23:25:08 +00:00
|
|
|
; SSE41-NEXT: blendps {{.*#+}} xmm0 = xmm1[0],xmm0[1],xmm1[2],xmm0[3]
|
2014-10-02 07:56:47 +00:00
|
|
|
; SSE41-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_blend_02:
|
|
|
|
; AVX: # BB#0:
|
|
|
|
; AVX-NEXT: vblendps {{.*#+}} xmm0 = xmm1[0],xmm0[1],xmm1[2],xmm0[3]
|
|
|
|
; AVX-NEXT: retq
|
|
|
|
%shuffle = shufflevector <4 x float> %a, <4 x float> %b, <4 x i32> <i32 4, i32 1, i32 undef, i32 3>
|
|
|
|
%shuffle6 = shufflevector <4 x float> %shuffle, <4 x float> %b, <4 x i32> <i32 0, i32 1, i32 6, i32 3>
|
|
|
|
ret <4 x float> %shuffle6
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x float> @combine_blend_123(<4 x float> %a, <4 x float> %b) {
|
|
|
|
; SSE2-LABEL: combine_blend_123:
|
|
|
|
; SSE2: # BB#0:
|
2015-02-04 00:58:42 +00:00
|
|
|
; SSE2-NEXT: movss {{.*#+}} xmm1 = xmm0[0],xmm1[1,2,3]
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; SSE2-NEXT: movaps %xmm1, %xmm0
|
2014-10-02 07:56:47 +00:00
|
|
|
; SSE2-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSSE3-LABEL: combine_blend_123:
|
|
|
|
; SSSE3: # BB#0:
|
2015-02-04 00:58:42 +00:00
|
|
|
; SSSE3-NEXT: movss {{.*#+}} xmm1 = xmm0[0],xmm1[1,2,3]
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; SSSE3-NEXT: movaps %xmm1, %xmm0
|
2014-10-02 07:56:47 +00:00
|
|
|
; SSSE3-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSE41-LABEL: combine_blend_123:
|
|
|
|
; SSE41: # BB#0:
|
2014-11-04 23:25:08 +00:00
|
|
|
; SSE41-NEXT: blendps {{.*#+}} xmm0 = xmm0[0],xmm1[1,2,3]
|
2014-10-02 07:56:47 +00:00
|
|
|
; SSE41-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_blend_123:
|
|
|
|
; AVX: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; AVX-NEXT: vblendps {{.*#+}} xmm0 = xmm0[0],xmm1[1,2,3]
|
2014-10-02 07:56:47 +00:00
|
|
|
; AVX-NEXT: retq
|
|
|
|
%shuffle = shufflevector <4 x float> %a, <4 x float> %b, <4 x i32> <i32 0, i32 5, i32 undef, i32 undef>
|
|
|
|
%shuffle6 = shufflevector <4 x float> %shuffle, <4 x float> %b, <4 x i32> <i32 0, i32 1, i32 6, i32 undef>
|
|
|
|
%shuffle12 = shufflevector <4 x float> %shuffle6, <4 x float> %b, <4 x i32> <i32 0, i32 1, i32 2, i32 7>
|
|
|
|
ret <4 x float> %shuffle12
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x i32> @combine_test_movhl_1(<4 x i32> %a, <4 x i32> %b) {
|
|
|
|
; SSE-LABEL: combine_test_movhl_1:
|
|
|
|
; SSE: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; SSE-NEXT: punpckhqdq {{.*#+}} xmm1 = xmm1[1],xmm0[1]
|
|
|
|
; SSE-NEXT: movdqa %xmm1, %xmm0
|
2014-10-02 07:56:47 +00:00
|
|
|
; SSE-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_test_movhl_1:
|
|
|
|
; AVX: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; AVX-NEXT: vpunpckhqdq {{.*#+}} xmm0 = xmm1[1],xmm0[1]
|
2014-10-02 07:56:47 +00:00
|
|
|
; AVX-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x i32> %a, <4 x i32> %b, <4 x i32> <i32 2, i32 7, i32 5, i32 3>
|
|
|
|
%2 = shufflevector <4 x i32> %1, <4 x i32> %b, <4 x i32> <i32 6, i32 1, i32 0, i32 3>
|
|
|
|
ret <4 x i32> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x i32> @combine_test_movhl_2(<4 x i32> %a, <4 x i32> %b) {
|
|
|
|
; SSE-LABEL: combine_test_movhl_2:
|
|
|
|
; SSE: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; SSE-NEXT: punpckhqdq {{.*#+}} xmm1 = xmm1[1],xmm0[1]
|
|
|
|
; SSE-NEXT: movdqa %xmm1, %xmm0
|
2014-10-02 07:56:47 +00:00
|
|
|
; SSE-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_test_movhl_2:
|
|
|
|
; AVX: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; AVX-NEXT: vpunpckhqdq {{.*#+}} xmm0 = xmm1[1],xmm0[1]
|
2014-10-02 07:56:47 +00:00
|
|
|
; AVX-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x i32> %a, <4 x i32> %b, <4 x i32> <i32 2, i32 0, i32 3, i32 6>
|
|
|
|
%2 = shufflevector <4 x i32> %1, <4 x i32> %b, <4 x i32> <i32 3, i32 7, i32 0, i32 2>
|
|
|
|
ret <4 x i32> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x i32> @combine_test_movhl_3(<4 x i32> %a, <4 x i32> %b) {
|
|
|
|
; SSE-LABEL: combine_test_movhl_3:
|
|
|
|
; SSE: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; SSE-NEXT: punpckhqdq {{.*#+}} xmm1 = xmm1[1],xmm0[1]
|
|
|
|
; SSE-NEXT: movdqa %xmm1, %xmm0
|
2014-10-02 07:56:47 +00:00
|
|
|
; SSE-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_test_movhl_3:
|
|
|
|
; AVX: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; AVX-NEXT: vpunpckhqdq {{.*#+}} xmm0 = xmm1[1],xmm0[1]
|
2014-10-02 07:56:47 +00:00
|
|
|
; AVX-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x i32> %a, <4 x i32> %b, <4 x i32> <i32 7, i32 6, i32 3, i32 2>
|
|
|
|
%2 = shufflevector <4 x i32> %1, <4 x i32> %b, <4 x i32> <i32 6, i32 0, i32 3, i32 2>
|
|
|
|
ret <4 x i32> %2
|
|
|
|
}
|
2014-10-02 08:02:34 +00:00
|
|
|
|
|
|
|
|
|
|
|
; Verify that we fold shuffles according to rule:
|
|
|
|
; (shuffle(shuffle A, Undef, M0), B, M1) -> (shuffle A, B, M2)
|
|
|
|
|
|
|
|
define <4 x float> @combine_undef_input_test1(<4 x float> %a, <4 x float> %b) {
|
|
|
|
; SSE2-LABEL: combine_undef_input_test1:
|
|
|
|
; SSE2: # BB#0:
|
2015-02-04 00:58:42 +00:00
|
|
|
; SSE2-NEXT: movsd {{.*#+}} xmm0 = xmm1[0],xmm0[1]
|
2014-10-02 08:02:34 +00:00
|
|
|
; SSE2-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSSE3-LABEL: combine_undef_input_test1:
|
|
|
|
; SSSE3: # BB#0:
|
2015-02-04 00:58:42 +00:00
|
|
|
; SSSE3-NEXT: movsd {{.*#+}} xmm0 = xmm1[0],xmm0[1]
|
2014-10-02 08:02:34 +00:00
|
|
|
; SSSE3-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSE41-LABEL: combine_undef_input_test1:
|
|
|
|
; SSE41: # BB#0:
|
2014-11-04 23:25:08 +00:00
|
|
|
; SSE41-NEXT: blendpd {{.*#+}} xmm0 = xmm1[0],xmm0[1]
|
2014-10-02 08:02:34 +00:00
|
|
|
; SSE41-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_undef_input_test1:
|
|
|
|
; AVX: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; AVX-NEXT: vblendpd {{.*#+}} xmm0 = xmm1[0],xmm0[1]
|
2014-10-02 08:02:34 +00:00
|
|
|
; AVX-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x float> %a, <4 x float> undef, <4 x i32> <i32 4, i32 2, i32 3, i32 1>
|
|
|
|
%2 = shufflevector <4 x float> %1, <4 x float> %b, <4 x i32> <i32 4, i32 5, i32 1, i32 2>
|
|
|
|
ret <4 x float> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x float> @combine_undef_input_test2(<4 x float> %a, <4 x float> %b) {
|
|
|
|
; SSE-LABEL: combine_undef_input_test2:
|
|
|
|
; SSE: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; SSE-NEXT: unpcklpd {{.*#+}} xmm0 = xmm0[0],xmm1[0]
|
2014-10-02 08:02:34 +00:00
|
|
|
; SSE-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_undef_input_test2:
|
|
|
|
; AVX: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; AVX-NEXT: vunpcklpd {{.*#+}} xmm0 = xmm0[0],xmm1[0]
|
2014-10-02 08:02:34 +00:00
|
|
|
; AVX-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x float> %a, <4 x float> undef, <4 x i32> <i32 6, i32 0, i32 1, i32 7>
|
|
|
|
%2 = shufflevector <4 x float> %1, <4 x float> %b, <4 x i32> <i32 1, i32 2, i32 4, i32 5>
|
|
|
|
ret <4 x float> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x float> @combine_undef_input_test3(<4 x float> %a, <4 x float> %b) {
|
|
|
|
; SSE-LABEL: combine_undef_input_test3:
|
|
|
|
; SSE: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; SSE-NEXT: unpcklpd {{.*#+}} xmm0 = xmm0[0],xmm1[0]
|
2014-10-02 08:02:34 +00:00
|
|
|
; SSE-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_undef_input_test3:
|
|
|
|
; AVX: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; AVX-NEXT: vunpcklpd {{.*#+}} xmm0 = xmm0[0],xmm1[0]
|
2014-10-02 08:02:34 +00:00
|
|
|
; AVX-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x float> %a, <4 x float> undef, <4 x i32> <i32 0, i32 5, i32 1, i32 7>
|
|
|
|
%2 = shufflevector <4 x float> %1, <4 x float> %b, <4 x i32> <i32 0, i32 2, i32 4, i32 1>
|
|
|
|
ret <4 x float> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x float> @combine_undef_input_test4(<4 x float> %a, <4 x float> %b) {
|
|
|
|
; SSE-LABEL: combine_undef_input_test4:
|
|
|
|
; SSE: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; SSE-NEXT: unpckhpd {{.*#+}} xmm1 = xmm1[1],xmm0[1]
|
|
|
|
; SSE-NEXT: movapd %xmm1, %xmm0
|
2014-10-02 08:02:34 +00:00
|
|
|
; SSE-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_undef_input_test4:
|
|
|
|
; AVX: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; AVX-NEXT: vunpckhpd {{.*#+}} xmm0 = xmm1[1],xmm0[1]
|
2014-10-02 08:02:34 +00:00
|
|
|
; AVX-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x float> %a, <4 x float> undef, <4 x i32> <i32 2, i32 3, i32 5, i32 5>
|
|
|
|
%2 = shufflevector <4 x float> %1, <4 x float> %b, <4 x i32> <i32 6, i32 7, i32 0, i32 1>
|
|
|
|
ret <4 x float> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x float> @combine_undef_input_test5(<4 x float> %a, <4 x float> %b) {
|
|
|
|
; SSE2-LABEL: combine_undef_input_test5:
|
|
|
|
; SSE2: # BB#0:
|
2015-02-04 00:58:42 +00:00
|
|
|
; SSE2-NEXT: movsd {{.*#+}} xmm1 = xmm0[0],xmm1[1]
|
2015-02-04 10:58:53 +00:00
|
|
|
; SSE2-NEXT: movapd %xmm1, %xmm0
|
2014-10-02 08:02:34 +00:00
|
|
|
; SSE2-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSSE3-LABEL: combine_undef_input_test5:
|
|
|
|
; SSSE3: # BB#0:
|
2015-02-04 00:58:42 +00:00
|
|
|
; SSSE3-NEXT: movsd {{.*#+}} xmm1 = xmm0[0],xmm1[1]
|
2015-02-04 10:58:53 +00:00
|
|
|
; SSSE3-NEXT: movapd %xmm1, %xmm0
|
2014-10-02 08:02:34 +00:00
|
|
|
; SSSE3-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSE41-LABEL: combine_undef_input_test5:
|
|
|
|
; SSE41: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; SSE41-NEXT: blendpd {{.*#+}} xmm0 = xmm0[0],xmm1[1]
|
2014-10-02 08:02:34 +00:00
|
|
|
; SSE41-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_undef_input_test5:
|
|
|
|
; AVX: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; AVX-NEXT: vblendpd {{.*#+}} xmm0 = xmm0[0],xmm1[1]
|
2014-10-02 08:02:34 +00:00
|
|
|
; AVX-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x float> %a, <4 x float> undef, <4 x i32> <i32 0, i32 4, i32 1, i32 3>
|
|
|
|
%2 = shufflevector <4 x float> %1, <4 x float> %b, <4 x i32> <i32 0, i32 2, i32 6, i32 7>
|
|
|
|
ret <4 x float> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
; Verify that we fold shuffles according to rule:
|
|
|
|
; (shuffle(shuffle A, Undef, M0), A, M1) -> (shuffle A, Undef, M2)
|
|
|
|
|
|
|
|
define <4 x float> @combine_undef_input_test6(<4 x float> %a) {
|
|
|
|
; ALL-LABEL: combine_undef_input_test6:
|
|
|
|
; ALL: # BB#0:
|
|
|
|
; ALL-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x float> %a, <4 x float> undef, <4 x i32> <i32 4, i32 2, i32 3, i32 1>
|
|
|
|
%2 = shufflevector <4 x float> %1, <4 x float> %a, <4 x i32> <i32 4, i32 5, i32 1, i32 2>
|
|
|
|
ret <4 x float> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x float> @combine_undef_input_test7(<4 x float> %a) {
|
|
|
|
; SSE2-LABEL: combine_undef_input_test7:
|
|
|
|
; SSE2: # BB#0:
|
|
|
|
; SSE2-NEXT: movlhps {{.*#+}} xmm0 = xmm0[0,0]
|
|
|
|
; SSE2-NEXT: retq
|
2015-02-04 00:58:42 +00:00
|
|
|
;
|
|
|
|
; SSSE3-LABEL: combine_undef_input_test7:
|
|
|
|
; SSSE3: # BB#0:
|
|
|
|
; SSSE3-NEXT: movddup {{.*#+}} xmm0 = xmm0[0,0]
|
|
|
|
; SSSE3-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSE41-LABEL: combine_undef_input_test7:
|
|
|
|
; SSE41: # BB#0:
|
|
|
|
; SSE41-NEXT: movddup {{.*#+}} xmm0 = xmm0[0,0]
|
|
|
|
; SSE41-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_undef_input_test7:
|
|
|
|
; AVX: # BB#0:
|
|
|
|
; AVX-NEXT: vmovddup {{.*#+}} xmm0 = xmm0[0,0]
|
|
|
|
; AVX-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x float> %a, <4 x float> undef, <4 x i32> <i32 6, i32 0, i32 1, i32 7>
|
|
|
|
%2 = shufflevector <4 x float> %1, <4 x float> %a, <4 x i32> <i32 1, i32 2, i32 4, i32 5>
|
2014-10-02 08:02:34 +00:00
|
|
|
ret <4 x float> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x float> @combine_undef_input_test8(<4 x float> %a) {
|
|
|
|
; SSE2-LABEL: combine_undef_input_test8:
|
|
|
|
; SSE2: # BB#0:
|
|
|
|
; SSE2-NEXT: movlhps {{.*#+}} xmm0 = xmm0[0,0]
|
|
|
|
; SSE2-NEXT: retq
|
2015-02-04 00:58:42 +00:00
|
|
|
;
|
|
|
|
; SSSE3-LABEL: combine_undef_input_test8:
|
|
|
|
; SSSE3: # BB#0:
|
|
|
|
; SSSE3-NEXT: movddup {{.*#+}} xmm0 = xmm0[0,0]
|
|
|
|
; SSSE3-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSE41-LABEL: combine_undef_input_test8:
|
|
|
|
; SSE41: # BB#0:
|
|
|
|
; SSE41-NEXT: movddup {{.*#+}} xmm0 = xmm0[0,0]
|
|
|
|
; SSE41-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_undef_input_test8:
|
|
|
|
; AVX: # BB#0:
|
|
|
|
; AVX-NEXT: vmovddup {{.*#+}} xmm0 = xmm0[0,0]
|
|
|
|
; AVX-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x float> %a, <4 x float> undef, <4 x i32> <i32 0, i32 5, i32 1, i32 7>
|
|
|
|
%2 = shufflevector <4 x float> %1, <4 x float> %a, <4 x i32> <i32 0, i32 2, i32 4, i32 1>
|
2014-10-02 08:02:34 +00:00
|
|
|
ret <4 x float> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x float> @combine_undef_input_test9(<4 x float> %a) {
|
|
|
|
; SSE-LABEL: combine_undef_input_test9:
|
|
|
|
; SSE: # BB#0:
|
|
|
|
; SSE-NEXT: movhlps {{.*#+}} xmm0 = xmm0[1,1]
|
|
|
|
; SSE-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_undef_input_test9:
|
|
|
|
; AVX: # BB#0:
|
|
|
|
; AVX-NEXT: vmovhlps {{.*#+}} xmm0 = xmm0[1,1]
|
|
|
|
; AVX-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x float> %a, <4 x float> undef, <4 x i32> <i32 2, i32 3, i32 5, i32 5>
|
|
|
|
%2 = shufflevector <4 x float> %1, <4 x float> %a, <4 x i32> <i32 6, i32 7, i32 0, i32 1>
|
|
|
|
ret <4 x float> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x float> @combine_undef_input_test10(<4 x float> %a) {
|
|
|
|
; ALL-LABEL: combine_undef_input_test10:
|
|
|
|
; ALL: # BB#0:
|
|
|
|
; ALL-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x float> %a, <4 x float> undef, <4 x i32> <i32 0, i32 4, i32 1, i32 3>
|
|
|
|
%2 = shufflevector <4 x float> %1, <4 x float> %a, <4 x i32> <i32 0, i32 2, i32 6, i32 7>
|
|
|
|
ret <4 x float> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x float> @combine_undef_input_test11(<4 x float> %a, <4 x float> %b) {
|
|
|
|
; SSE2-LABEL: combine_undef_input_test11:
|
|
|
|
; SSE2: # BB#0:
|
2015-02-04 00:58:42 +00:00
|
|
|
; SSE2-NEXT: movsd {{.*#+}} xmm0 = xmm1[0],xmm0[1]
|
2014-10-02 08:02:34 +00:00
|
|
|
; SSE2-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSSE3-LABEL: combine_undef_input_test11:
|
|
|
|
; SSSE3: # BB#0:
|
2015-02-04 00:58:42 +00:00
|
|
|
; SSSE3-NEXT: movsd {{.*#+}} xmm0 = xmm1[0],xmm0[1]
|
2014-10-02 08:02:34 +00:00
|
|
|
; SSSE3-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSE41-LABEL: combine_undef_input_test11:
|
|
|
|
; SSE41: # BB#0:
|
2014-11-04 23:25:08 +00:00
|
|
|
; SSE41-NEXT: blendpd {{.*#+}} xmm0 = xmm1[0],xmm0[1]
|
2014-10-02 08:02:34 +00:00
|
|
|
; SSE41-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_undef_input_test11:
|
|
|
|
; AVX: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; AVX-NEXT: vblendpd {{.*#+}} xmm0 = xmm1[0],xmm0[1]
|
2014-10-02 08:02:34 +00:00
|
|
|
; AVX-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x float> %a, <4 x float> undef, <4 x i32> <i32 4, i32 2, i32 3, i32 1>
|
|
|
|
%2 = shufflevector <4 x float> %b, <4 x float> %1, <4 x i32> <i32 0, i32 1, i32 5, i32 6>
|
|
|
|
ret <4 x float> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x float> @combine_undef_input_test12(<4 x float> %a, <4 x float> %b) {
|
|
|
|
; SSE-LABEL: combine_undef_input_test12:
|
|
|
|
; SSE: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; SSE-NEXT: unpcklpd {{.*#+}} xmm0 = xmm0[0],xmm1[0]
|
2014-10-02 08:02:34 +00:00
|
|
|
; SSE-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_undef_input_test12:
|
|
|
|
; AVX: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; AVX-NEXT: vunpcklpd {{.*#+}} xmm0 = xmm0[0],xmm1[0]
|
2014-10-02 08:02:34 +00:00
|
|
|
; AVX-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x float> %a, <4 x float> undef, <4 x i32> <i32 6, i32 0, i32 1, i32 7>
|
|
|
|
%2 = shufflevector <4 x float> %b, <4 x float> %1, <4 x i32> <i32 5, i32 6, i32 0, i32 1>
|
|
|
|
ret <4 x float> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x float> @combine_undef_input_test13(<4 x float> %a, <4 x float> %b) {
|
|
|
|
; SSE-LABEL: combine_undef_input_test13:
|
|
|
|
; SSE: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; SSE-NEXT: unpcklpd {{.*#+}} xmm0 = xmm0[0],xmm1[0]
|
2014-10-02 08:02:34 +00:00
|
|
|
; SSE-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_undef_input_test13:
|
|
|
|
; AVX: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; AVX-NEXT: vunpcklpd {{.*#+}} xmm0 = xmm0[0],xmm1[0]
|
2014-10-02 08:02:34 +00:00
|
|
|
; AVX-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x float> %a, <4 x float> undef, <4 x i32> <i32 0, i32 5, i32 1, i32 7>
|
|
|
|
%2 = shufflevector <4 x float> %b, <4 x float> %1, <4 x i32> <i32 4, i32 5, i32 0, i32 5>
|
|
|
|
ret <4 x float> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x float> @combine_undef_input_test14(<4 x float> %a, <4 x float> %b) {
|
|
|
|
; SSE-LABEL: combine_undef_input_test14:
|
|
|
|
; SSE: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; SSE-NEXT: unpckhpd {{.*#+}} xmm1 = xmm1[1],xmm0[1]
|
|
|
|
; SSE-NEXT: movapd %xmm1, %xmm0
|
2014-10-02 08:02:34 +00:00
|
|
|
; SSE-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_undef_input_test14:
|
|
|
|
; AVX: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; AVX-NEXT: vunpckhpd {{.*#+}} xmm0 = xmm1[1],xmm0[1]
|
2014-10-02 08:02:34 +00:00
|
|
|
; AVX-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x float> %a, <4 x float> undef, <4 x i32> <i32 2, i32 3, i32 5, i32 5>
|
|
|
|
%2 = shufflevector <4 x float> %b, <4 x float> %1, <4 x i32> <i32 2, i32 3, i32 4, i32 5>
|
|
|
|
ret <4 x float> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x float> @combine_undef_input_test15(<4 x float> %a, <4 x float> %b) {
|
|
|
|
; SSE2-LABEL: combine_undef_input_test15:
|
|
|
|
; SSE2: # BB#0:
|
2015-02-04 00:58:42 +00:00
|
|
|
; SSE2-NEXT: movsd {{.*#+}} xmm1 = xmm0[0],xmm1[1]
|
2015-02-04 10:58:53 +00:00
|
|
|
; SSE2-NEXT: movapd %xmm1, %xmm0
|
2014-10-02 08:02:34 +00:00
|
|
|
; SSE2-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSSE3-LABEL: combine_undef_input_test15:
|
|
|
|
; SSSE3: # BB#0:
|
2015-02-04 00:58:42 +00:00
|
|
|
; SSSE3-NEXT: movsd {{.*#+}} xmm1 = xmm0[0],xmm1[1]
|
2015-02-04 10:58:53 +00:00
|
|
|
; SSSE3-NEXT: movapd %xmm1, %xmm0
|
2014-10-02 08:02:34 +00:00
|
|
|
; SSSE3-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSE41-LABEL: combine_undef_input_test15:
|
|
|
|
; SSE41: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; SSE41-NEXT: blendpd {{.*#+}} xmm0 = xmm0[0],xmm1[1]
|
2014-10-02 08:02:34 +00:00
|
|
|
; SSE41-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_undef_input_test15:
|
|
|
|
; AVX: # BB#0:
|
[x86] Enable the new vector shuffle lowering by default.
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-04 03:52:55 +00:00
|
|
|
; AVX-NEXT: vblendpd {{.*#+}} xmm0 = xmm0[0],xmm1[1]
|
2014-10-02 08:02:34 +00:00
|
|
|
; AVX-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x float> %a, <4 x float> undef, <4 x i32> <i32 0, i32 4, i32 1, i32 3>
|
|
|
|
%2 = shufflevector <4 x float> %b, <4 x float> %1, <4 x i32> <i32 4, i32 6, i32 2, i32 3>
|
|
|
|
ret <4 x float> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
; Verify that shuffles are canonicalized according to rules:
|
|
|
|
; shuffle(B, shuffle(A, Undef)) -> shuffle(shuffle(A, Undef), B)
|
|
|
|
;
|
|
|
|
; This allows to trigger the following combine rule:
|
|
|
|
; (shuffle(shuffle A, Undef, M0), A, M1) -> (shuffle A, Undef, M2)
|
|
|
|
;
|
|
|
|
; As a result, all the shuffle pairs in each function below should be
|
|
|
|
; combined into a single legal shuffle operation.
|
|
|
|
|
|
|
|
define <4 x float> @combine_undef_input_test16(<4 x float> %a) {
|
|
|
|
; ALL-LABEL: combine_undef_input_test16:
|
|
|
|
; ALL: # BB#0:
|
|
|
|
; ALL-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x float> %a, <4 x float> undef, <4 x i32> <i32 4, i32 2, i32 3, i32 1>
|
|
|
|
%2 = shufflevector <4 x float> %a, <4 x float> %1, <4 x i32> <i32 0, i32 1, i32 5, i32 3>
|
|
|
|
ret <4 x float> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x float> @combine_undef_input_test17(<4 x float> %a) {
|
|
|
|
; SSE2-LABEL: combine_undef_input_test17:
|
|
|
|
; SSE2: # BB#0:
|
|
|
|
; SSE2-NEXT: movlhps {{.*#+}} xmm0 = xmm0[0,0]
|
|
|
|
; SSE2-NEXT: retq
|
2015-02-04 00:58:42 +00:00
|
|
|
;
|
|
|
|
; SSSE3-LABEL: combine_undef_input_test17:
|
|
|
|
; SSSE3: # BB#0:
|
|
|
|
; SSSE3-NEXT: movddup {{.*#+}} xmm0 = xmm0[0,0]
|
|
|
|
; SSSE3-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSE41-LABEL: combine_undef_input_test17:
|
|
|
|
; SSE41: # BB#0:
|
|
|
|
; SSE41-NEXT: movddup {{.*#+}} xmm0 = xmm0[0,0]
|
|
|
|
; SSE41-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_undef_input_test17:
|
|
|
|
; AVX: # BB#0:
|
|
|
|
; AVX-NEXT: vmovddup {{.*#+}} xmm0 = xmm0[0,0]
|
|
|
|
; AVX-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x float> %a, <4 x float> undef, <4 x i32> <i32 6, i32 0, i32 1, i32 7>
|
|
|
|
%2 = shufflevector <4 x float> %a, <4 x float> %1, <4 x i32> <i32 5, i32 6, i32 0, i32 1>
|
2014-10-02 08:02:34 +00:00
|
|
|
ret <4 x float> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x float> @combine_undef_input_test18(<4 x float> %a) {
|
|
|
|
; SSE2-LABEL: combine_undef_input_test18:
|
|
|
|
; SSE2: # BB#0:
|
|
|
|
; SSE2-NEXT: movlhps {{.*#+}} xmm0 = xmm0[0,0]
|
|
|
|
; SSE2-NEXT: retq
|
2015-02-04 00:58:42 +00:00
|
|
|
;
|
|
|
|
; SSSE3-LABEL: combine_undef_input_test18:
|
|
|
|
; SSSE3: # BB#0:
|
|
|
|
; SSSE3-NEXT: movddup {{.*#+}} xmm0 = xmm0[0,0]
|
|
|
|
; SSSE3-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSE41-LABEL: combine_undef_input_test18:
|
|
|
|
; SSE41: # BB#0:
|
|
|
|
; SSE41-NEXT: movddup {{.*#+}} xmm0 = xmm0[0,0]
|
|
|
|
; SSE41-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_undef_input_test18:
|
|
|
|
; AVX: # BB#0:
|
|
|
|
; AVX-NEXT: vmovddup {{.*#+}} xmm0 = xmm0[0,0]
|
|
|
|
; AVX-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x float> %a, <4 x float> undef, <4 x i32> <i32 0, i32 5, i32 1, i32 7>
|
|
|
|
%2 = shufflevector <4 x float> %a, <4 x float> %1, <4 x i32> <i32 4, i32 6, i32 0, i32 5>
|
2014-10-02 08:02:34 +00:00
|
|
|
ret <4 x float> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x float> @combine_undef_input_test19(<4 x float> %a) {
|
|
|
|
; SSE-LABEL: combine_undef_input_test19:
|
|
|
|
; SSE: # BB#0:
|
|
|
|
; SSE-NEXT: movhlps {{.*#+}} xmm0 = xmm0[1,1]
|
|
|
|
; SSE-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: combine_undef_input_test19:
|
|
|
|
; AVX: # BB#0:
|
|
|
|
; AVX-NEXT: vmovhlps {{.*#+}} xmm0 = xmm0[1,1]
|
|
|
|
; AVX-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x float> %a, <4 x float> undef, <4 x i32> <i32 2, i32 3, i32 5, i32 5>
|
|
|
|
%2 = shufflevector <4 x float> %a, <4 x float> %1, <4 x i32> <i32 2, i32 3, i32 4, i32 5>
|
|
|
|
ret <4 x float> %2
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x float> @combine_undef_input_test20(<4 x float> %a) {
|
|
|
|
; ALL-LABEL: combine_undef_input_test20:
|
|
|
|
; ALL: # BB#0:
|
|
|
|
; ALL-NEXT: retq
|
|
|
|
%1 = shufflevector <4 x float> %a, <4 x float> undef, <4 x i32> <i32 0, i32 4, i32 1, i32 3>
|
|
|
|
%2 = shufflevector <4 x float> %a, <4 x float> %1, <4 x i32> <i32 4, i32 6, i32 2, i32 3>
|
|
|
|
ret <4 x float> %2
|
|
|
|
}
|
2014-10-05 19:14:34 +00:00
|
|
|
|
|
|
|
; These tests are designed to test the ability to combine away unnecessary
|
|
|
|
; operations feeding into a shuffle. The AVX cases are the important ones as
|
|
|
|
; they leverage operations which cannot be done naturally on the entire vector
|
|
|
|
; and thus are decomposed into multiple smaller operations.
|
|
|
|
|
|
|
|
define <8 x i32> @combine_unneeded_subvector1(<8 x i32> %a) {
|
|
|
|
; SSE-LABEL: combine_unneeded_subvector1:
|
|
|
|
; SSE: # BB#0:
|
|
|
|
; SSE-NEXT: paddd {{.*}}(%rip), %xmm1
|
|
|
|
; SSE-NEXT: pshufd {{.*#+}} xmm0 = xmm1[3,2,1,0]
|
|
|
|
; SSE-NEXT: movdqa %xmm0, %xmm1
|
|
|
|
; SSE-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX1-LABEL: combine_unneeded_subvector1:
|
|
|
|
; AVX1: # BB#0:
|
|
|
|
; AVX1-NEXT: vextractf128 $1, %ymm0, %xmm0
|
|
|
|
; AVX1-NEXT: vpaddd {{.*}}(%rip), %xmm0, %xmm0
|
|
|
|
; AVX1-NEXT: vpermilps {{.*#+}} xmm0 = xmm0[3,2,1,0]
|
|
|
|
; AVX1-NEXT: vinsertf128 $1, %xmm0, %ymm0, %ymm0
|
|
|
|
; AVX1-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX2-LABEL: combine_unneeded_subvector1:
|
|
|
|
; AVX2: # BB#0:
|
|
|
|
; AVX2-NEXT: vpaddd {{.*}}(%rip), %ymm0, %ymm0
|
|
|
|
; AVX2-NEXT: vmovdqa {{.*#+}} ymm1 = [7,6,5,4,7,6,5,4]
|
|
|
|
; AVX2-NEXT: vpermd %ymm0, %ymm1, %ymm0
|
|
|
|
; AVX2-NEXT: retq
|
|
|
|
%b = add <8 x i32> %a, <i32 1, i32 2, i32 3, i32 4, i32 5, i32 6, i32 7, i32 8>
|
|
|
|
%c = shufflevector <8 x i32> %b, <8 x i32> undef, <8 x i32> <i32 7, i32 6, i32 5, i32 4, i32 7, i32 6, i32 5, i32 4>
|
|
|
|
ret <8 x i32> %c
|
|
|
|
}
|
|
|
|
|
|
|
|
define <8 x i32> @combine_unneeded_subvector2(<8 x i32> %a, <8 x i32> %b) {
|
|
|
|
; SSE-LABEL: combine_unneeded_subvector2:
|
|
|
|
; SSE: # BB#0:
|
|
|
|
; SSE-NEXT: paddd {{.*}}(%rip), %xmm1
|
|
|
|
; SSE-NEXT: pshufd {{.*#+}} xmm0 = xmm3[3,2,1,0]
|
|
|
|
; SSE-NEXT: pshufd {{.*#+}} xmm1 = xmm1[3,2,1,0]
|
|
|
|
; SSE-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX1-LABEL: combine_unneeded_subvector2:
|
|
|
|
; AVX1: # BB#0:
|
|
|
|
; AVX1-NEXT: vextractf128 $1, %ymm0, %xmm0
|
|
|
|
; AVX1-NEXT: vpaddd {{.*}}(%rip), %xmm0, %xmm0
|
2014-11-21 13:56:05 +00:00
|
|
|
; AVX1-NEXT: vinsertf128 $1, %xmm0, %ymm0, %ymm0
|
|
|
|
; AVX1-NEXT: vperm2f128 {{.*#+}} ymm0 = ymm1[2,3],ymm0[2,3]
|
|
|
|
; AVX1-NEXT: vpermilps {{.*#+}} ymm0 = ymm0[3,2,1,0,7,6,5,4]
|
2014-10-05 19:14:34 +00:00
|
|
|
; AVX1-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX2-LABEL: combine_unneeded_subvector2:
|
|
|
|
; AVX2: # BB#0:
|
|
|
|
; AVX2-NEXT: vpaddd {{.*}}(%rip), %ymm0, %ymm0
|
2014-11-21 13:56:05 +00:00
|
|
|
; AVX2-NEXT: vperm2i128 {{.*#+}} ymm0 = ymm1[2,3],ymm0[2,3]
|
2014-10-05 19:14:34 +00:00
|
|
|
; AVX2-NEXT: vpshufd {{.*#+}} ymm0 = ymm0[3,2,1,0,7,6,5,4]
|
|
|
|
; AVX2-NEXT: retq
|
|
|
|
%c = add <8 x i32> %a, <i32 1, i32 2, i32 3, i32 4, i32 5, i32 6, i32 7, i32 8>
|
|
|
|
%d = shufflevector <8 x i32> %b, <8 x i32> %c, <8 x i32> <i32 7, i32 6, i32 5, i32 4, i32 15, i32 14, i32 13, i32 12>
|
|
|
|
ret <8 x i32> %d
|
|
|
|
}
|
2014-11-11 11:20:31 +00:00
|
|
|
|
|
|
|
define <4 x float> @combine_insertps1(<4 x float> %a, <4 x float> %b) {
|
2015-02-04 00:58:42 +00:00
|
|
|
; SSE2-LABEL: combine_insertps1:
|
|
|
|
; SSE2: # BB#0:
|
2015-02-15 06:37:21 +00:00
|
|
|
; SSE2-NEXT: shufps {{.*#+}} xmm1 = xmm1[2,0],xmm0[1,0]
|
|
|
|
; SSE2-NEXT: shufps {{.*#+}} xmm1 = xmm1[0,2],xmm0[2,3]
|
|
|
|
; SSE2-NEXT: movaps %xmm1, %xmm0
|
2015-02-04 00:58:42 +00:00
|
|
|
; SSE2-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSSE3-LABEL: combine_insertps1:
|
|
|
|
; SSSE3: # BB#0:
|
2015-02-15 06:37:21 +00:00
|
|
|
; SSSE3-NEXT: shufps {{.*#+}} xmm1 = xmm1[2,0],xmm0[1,0]
|
|
|
|
; SSSE3-NEXT: shufps {{.*#+}} xmm1 = xmm1[0,2],xmm0[2,3]
|
|
|
|
; SSSE3-NEXT: movaps %xmm1, %xmm0
|
2015-02-04 00:58:42 +00:00
|
|
|
; SSSE3-NEXT: retq
|
|
|
|
;
|
2014-11-11 11:20:31 +00:00
|
|
|
; SSE41-LABEL: combine_insertps1:
|
|
|
|
; SSE41: # BB#0:
|
|
|
|
; SSE41-NEXT: insertps {{.*#+}} xmm0 = xmm1[2],xmm0[1,2,3]
|
|
|
|
; SSE41-NEXT: retq
|
2014-11-12 09:17:15 +00:00
|
|
|
;
|
2014-11-11 11:20:31 +00:00
|
|
|
; AVX-LABEL: combine_insertps1:
|
|
|
|
; AVX: # BB#0:
|
|
|
|
; AVX-NEXT: vinsertps {{.*#+}} xmm0 = xmm1[2],xmm0[1,2,3]
|
|
|
|
; AVX-NEXT: retq
|
2014-11-12 09:17:15 +00:00
|
|
|
|
2014-11-11 11:20:31 +00:00
|
|
|
%c = shufflevector <4 x float> %a, <4 x float> %b, <4 x i32><i32 0, i32 6, i32 2, i32 4>
|
|
|
|
%d = shufflevector <4 x float> %a, <4 x float> %c, <4 x i32> <i32 5, i32 1, i32 6, i32 3>
|
|
|
|
ret <4 x float> %d
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x float> @combine_insertps2(<4 x float> %a, <4 x float> %b) {
|
2015-02-04 00:58:42 +00:00
|
|
|
; SSE2-LABEL: combine_insertps2:
|
|
|
|
; SSE2: # BB#0:
|
2015-02-15 06:37:21 +00:00
|
|
|
; SSE2-NEXT: shufps {{.*#+}} xmm1 = xmm1[2,0],xmm0[0,0]
|
|
|
|
; SSE2-NEXT: shufps {{.*#+}} xmm1 = xmm1[2,0],xmm0[2,3]
|
2015-02-04 00:58:42 +00:00
|
|
|
; SSE2-NEXT: movaps %xmm1, %xmm0
|
|
|
|
; SSE2-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSSE3-LABEL: combine_insertps2:
|
|
|
|
; SSSE3: # BB#0:
|
2015-02-15 06:37:21 +00:00
|
|
|
; SSSE3-NEXT: shufps {{.*#+}} xmm1 = xmm1[2,0],xmm0[0,0]
|
|
|
|
; SSSE3-NEXT: shufps {{.*#+}} xmm1 = xmm1[2,0],xmm0[2,3]
|
2015-02-04 00:58:42 +00:00
|
|
|
; SSSE3-NEXT: movaps %xmm1, %xmm0
|
|
|
|
; SSSE3-NEXT: retq
|
|
|
|
;
|
2014-11-11 11:20:31 +00:00
|
|
|
; SSE41-LABEL: combine_insertps2:
|
|
|
|
; SSE41: # BB#0:
|
|
|
|
; SSE41-NEXT: insertps {{.*#+}} xmm0 = xmm0[0],xmm1[2],xmm0[2,3]
|
|
|
|
; SSE41-NEXT: retq
|
2014-11-12 09:17:15 +00:00
|
|
|
;
|
2014-11-11 11:20:31 +00:00
|
|
|
; AVX-LABEL: combine_insertps2:
|
|
|
|
; AVX: # BB#0:
|
|
|
|
; AVX-NEXT: vinsertps {{.*#+}} xmm0 = xmm0[0],xmm1[2],xmm0[2,3]
|
|
|
|
; AVX-NEXT: retq
|
2014-11-12 09:17:15 +00:00
|
|
|
|
2014-11-11 11:20:31 +00:00
|
|
|
%c = shufflevector <4 x float> %a, <4 x float> %b, <4 x i32><i32 0, i32 1, i32 6, i32 7>
|
|
|
|
%d = shufflevector <4 x float> %a, <4 x float> %c, <4 x i32> <i32 4, i32 6, i32 2, i32 3>
|
|
|
|
ret <4 x float> %d
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x float> @combine_insertps3(<4 x float> %a, <4 x float> %b) {
|
2015-02-04 00:58:42 +00:00
|
|
|
; SSE2-LABEL: combine_insertps3:
|
|
|
|
; SSE2: # BB#0:
|
2015-02-15 06:37:21 +00:00
|
|
|
; SSE2-NEXT: shufps {{.*#+}} xmm1 = xmm1[0,0],xmm0[3,0]
|
|
|
|
; SSE2-NEXT: shufps {{.*#+}} xmm0 = xmm0[0,1],xmm1[0,2]
|
2015-02-04 00:58:42 +00:00
|
|
|
; SSE2-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSSE3-LABEL: combine_insertps3:
|
|
|
|
; SSSE3: # BB#0:
|
2015-02-15 06:37:21 +00:00
|
|
|
; SSSE3-NEXT: shufps {{.*#+}} xmm1 = xmm1[0,0],xmm0[3,0]
|
|
|
|
; SSSE3-NEXT: shufps {{.*#+}} xmm0 = xmm0[0,1],xmm1[0,2]
|
2015-02-04 00:58:42 +00:00
|
|
|
; SSSE3-NEXT: retq
|
|
|
|
;
|
2014-11-11 11:20:31 +00:00
|
|
|
; SSE41-LABEL: combine_insertps3:
|
|
|
|
; SSE41: # BB#0:
|
|
|
|
; SSE41-NEXT: insertps {{.*#+}} xmm0 = xmm0[0,1],xmm1[0],xmm0[3]
|
|
|
|
; SSE41-NEXT: retq
|
2014-11-12 09:17:15 +00:00
|
|
|
;
|
2014-11-11 11:20:31 +00:00
|
|
|
; AVX-LABEL: combine_insertps3:
|
|
|
|
; AVX: # BB#0:
|
|
|
|
; AVX-NEXT: vinsertps {{.*#+}} xmm0 = xmm0[0,1],xmm1[0],xmm0[3]
|
|
|
|
; AVX-NEXT: retq
|
2014-11-12 09:17:15 +00:00
|
|
|
|
2014-11-11 11:20:31 +00:00
|
|
|
%c = shufflevector <4 x float> %a, <4 x float> %b, <4 x i32><i32 0, i32 4, i32 2, i32 5>
|
|
|
|
%d = shufflevector <4 x float> %a, <4 x float> %c, <4 x i32><i32 4, i32 1, i32 5, i32 3>
|
|
|
|
ret <4 x float> %d
|
|
|
|
}
|
|
|
|
|
|
|
|
define <4 x float> @combine_insertps4(<4 x float> %a, <4 x float> %b) {
|
2015-02-04 00:58:42 +00:00
|
|
|
; SSE2-LABEL: combine_insertps4:
|
|
|
|
; SSE2: # BB#0:
|
2015-02-15 06:37:21 +00:00
|
|
|
; SSE2-NEXT: shufps {{.*#+}} xmm1 = xmm1[0,0],xmm0[2,0]
|
|
|
|
; SSE2-NEXT: shufps {{.*#+}} xmm0 = xmm0[0,1],xmm1[2,0]
|
2015-02-04 00:58:42 +00:00
|
|
|
; SSE2-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSSE3-LABEL: combine_insertps4:
|
|
|
|
; SSSE3: # BB#0:
|
2015-02-15 06:37:21 +00:00
|
|
|
; SSSE3-NEXT: shufps {{.*#+}} xmm1 = xmm1[0,0],xmm0[2,0]
|
|
|
|
; SSSE3-NEXT: shufps {{.*#+}} xmm0 = xmm0[0,1],xmm1[2,0]
|
2015-02-04 00:58:42 +00:00
|
|
|
; SSSE3-NEXT: retq
|
|
|
|
;
|
2014-11-11 11:20:31 +00:00
|
|
|
; SSE41-LABEL: combine_insertps4:
|
|
|
|
; SSE41: # BB#0:
|
|
|
|
; SSE41-NEXT: insertps {{.*#+}} xmm0 = xmm0[0,1,2],xmm1[0]
|
|
|
|
; SSE41-NEXT: retq
|
2014-11-12 09:17:15 +00:00
|
|
|
;
|
2014-11-11 11:20:31 +00:00
|
|
|
; AVX-LABEL: combine_insertps4:
|
|
|
|
; AVX: # BB#0:
|
|
|
|
; AVX-NEXT: vinsertps {{.*#+}} xmm0 = xmm0[0,1,2],xmm1[0]
|
|
|
|
; AVX-NEXT: retq
|
2014-11-12 09:17:15 +00:00
|
|
|
|
2014-11-11 11:20:31 +00:00
|
|
|
%c = shufflevector <4 x float> %a, <4 x float> %b, <4 x i32><i32 0, i32 4, i32 2, i32 5>
|
|
|
|
%d = shufflevector <4 x float> %a, <4 x float> %c, <4 x i32><i32 4, i32 1, i32 6, i32 5>
|
|
|
|
ret <4 x float> %d
|
|
|
|
}
|
2015-02-15 07:01:10 +00:00
|
|
|
|
2015-02-15 07:05:50 +00:00
|
|
|
define <4 x float> @PR22377(<4 x float> %a, <4 x float> %b) {
|
2015-02-15 07:01:10 +00:00
|
|
|
; SSE-LABEL: PR22377:
|
|
|
|
; SSE: # BB#0: # %entry
|
|
|
|
; SSE-NEXT: movaps %xmm0, %xmm1
|
|
|
|
; SSE-NEXT: shufps {{.*#+}} xmm1 = xmm1[1,3,1,3]
|
|
|
|
; SSE-NEXT: shufps {{.*#+}} xmm0 = xmm0[0,2,0,2]
|
|
|
|
; SSE-NEXT: addps %xmm0, %xmm1
|
|
|
|
; SSE-NEXT: unpcklps {{.*#+}} xmm0 = xmm0[0],xmm1[0],xmm0[1],xmm1[1]
|
|
|
|
; SSE-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: PR22377:
|
|
|
|
; AVX: # BB#0: # %entry
|
|
|
|
; AVX-NEXT: vpermilps {{.*#+}} xmm1 = xmm0[1,3,1,3]
|
|
|
|
; AVX-NEXT: vpermilps {{.*#+}} xmm0 = xmm0[0,2,0,2]
|
|
|
|
; AVX-NEXT: vaddps %xmm0, %xmm1, %xmm1
|
|
|
|
; AVX-NEXT: vunpcklps {{.*#+}} xmm0 = xmm0[0],xmm1[0],xmm0[1],xmm1[1]
|
|
|
|
; AVX-NEXT: retq
|
|
|
|
entry:
|
|
|
|
%s1 = shufflevector <4 x float> %a, <4 x float> undef, <4 x i32> <i32 1, i32 3, i32 1, i32 3>
|
|
|
|
%s2 = shufflevector <4 x float> %a, <4 x float> undef, <4 x i32> <i32 0, i32 2, i32 0, i32 2>
|
|
|
|
%r2 = fadd <4 x float> %s1, %s2
|
|
|
|
%s3 = shufflevector <4 x float> %s2, <4 x float> %r2, <4 x i32> <i32 0, i32 4, i32 1, i32 5>
|
|
|
|
ret <4 x float> %s3
|
|
|
|
}
|
2015-02-15 07:05:50 +00:00
|
|
|
|
|
|
|
define <4 x float> @PR22390(<4 x float> %a, <4 x float> %b) {
|
|
|
|
; SSE2-LABEL: PR22390:
|
|
|
|
; SSE2: # BB#0: # %entry
|
|
|
|
; SSE2-NEXT: shufps {{.*#+}} xmm0 = xmm0[3,0,1,2]
|
|
|
|
; SSE2-NEXT: movaps %xmm0, %xmm2
|
|
|
|
; SSE2-NEXT: movss {{.*#+}} xmm2 = xmm1[0],xmm2[1,2,3]
|
|
|
|
; SSE2-NEXT: addps %xmm0, %xmm2
|
|
|
|
; SSE2-NEXT: movaps %xmm2, %xmm0
|
|
|
|
; SSE2-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSSE3-LABEL: PR22390:
|
|
|
|
; SSSE3: # BB#0: # %entry
|
|
|
|
; SSSE3-NEXT: shufps {{.*#+}} xmm0 = xmm0[3,0,1,2]
|
|
|
|
; SSSE3-NEXT: movaps %xmm0, %xmm2
|
|
|
|
; SSSE3-NEXT: movss {{.*#+}} xmm2 = xmm1[0],xmm2[1,2,3]
|
|
|
|
; SSSE3-NEXT: addps %xmm0, %xmm2
|
|
|
|
; SSSE3-NEXT: movaps %xmm2, %xmm0
|
|
|
|
; SSSE3-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSE41-LABEL: PR22390:
|
|
|
|
; SSE41: # BB#0: # %entry
|
|
|
|
; SSE41-NEXT: shufps {{.*#+}} xmm0 = xmm0[3,0,1,2]
|
|
|
|
; SSE41-NEXT: blendps {{.*#+}} xmm1 = xmm1[0],xmm0[1,2,3]
|
|
|
|
; SSE41-NEXT: addps %xmm1, %xmm0
|
|
|
|
; SSE41-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX-LABEL: PR22390:
|
|
|
|
; AVX: # BB#0: # %entry
|
|
|
|
; AVX-NEXT: vpermilps {{.*#+}} xmm0 = xmm0[3,0,1,2]
|
|
|
|
; AVX-NEXT: vblendps {{.*#+}} xmm1 = xmm1[0],xmm0[1,2,3]
|
|
|
|
; AVX-NEXT: vaddps %xmm1, %xmm0, %xmm0
|
|
|
|
; AVX-NEXT: retq
|
|
|
|
entry:
|
|
|
|
%s1 = shufflevector <4 x float> %a, <4 x float> undef, <4 x i32> <i32 3, i32 0, i32 1, i32 2>
|
|
|
|
%s2 = shufflevector <4 x float> %s1, <4 x float> %b, <4 x i32> <i32 4, i32 1, i32 2, i32 3>
|
|
|
|
%r2 = fadd <4 x float> %s1, %s2
|
|
|
|
ret <4 x float> %r2
|
|
|
|
}
|
2015-02-15 12:45:05 +00:00
|
|
|
|
|
|
|
define <8 x float> @PR22412(<8 x float> %a, <8 x float> %b) {
|
|
|
|
; SSE2-LABEL: PR22412:
|
|
|
|
; SSE2: # BB#0: # %entry
|
|
|
|
; SSE2-NEXT: movsd {{.*#+}} xmm2 = xmm0[0],xmm2[1]
|
|
|
|
; SSE2-NEXT: movapd %xmm2, %xmm0
|
|
|
|
; SSE2-NEXT: shufps {{.*#+}} xmm0 = xmm0[1,0],xmm3[3,2]
|
|
|
|
; SSE2-NEXT: shufps {{.*#+}} xmm3 = xmm3[1,0],xmm2[3,2]
|
|
|
|
; SSE2-NEXT: movaps %xmm3, %xmm1
|
|
|
|
; SSE2-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSSE3-LABEL: PR22412:
|
|
|
|
; SSSE3: # BB#0: # %entry
|
|
|
|
; SSSE3-NEXT: movsd {{.*#+}} xmm2 = xmm0[0],xmm2[1]
|
|
|
|
; SSSE3-NEXT: movapd %xmm2, %xmm0
|
|
|
|
; SSSE3-NEXT: shufps {{.*#+}} xmm0 = xmm0[1,0],xmm3[3,2]
|
|
|
|
; SSSE3-NEXT: shufps {{.*#+}} xmm3 = xmm3[1,0],xmm2[3,2]
|
|
|
|
; SSSE3-NEXT: movaps %xmm3, %xmm1
|
|
|
|
; SSSE3-NEXT: retq
|
|
|
|
;
|
|
|
|
; SSE41-LABEL: PR22412:
|
|
|
|
; SSE41: # BB#0: # %entry
|
|
|
|
; SSE41-NEXT: blendpd {{.*#+}} xmm0 = xmm0[0],xmm2[1]
|
|
|
|
; SSE41-NEXT: movapd %xmm0, %xmm1
|
|
|
|
; SSE41-NEXT: shufps {{.*#+}} xmm1 = xmm1[1,0],xmm3[3,2]
|
|
|
|
; SSE41-NEXT: shufps {{.*#+}} xmm3 = xmm3[1,0],xmm0[3,2]
|
|
|
|
; SSE41-NEXT: movaps %xmm1, %xmm0
|
|
|
|
; SSE41-NEXT: movaps %xmm3, %xmm1
|
|
|
|
; SSE41-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX1-LABEL: PR22412:
|
|
|
|
; AVX1: # BB#0: # %entry
|
|
|
|
; AVX1-NEXT: vblendpd {{.*#+}} ymm0 = ymm0[0],ymm1[1,2,3]
|
|
|
|
; AVX1-NEXT: vperm2f128 {{.*#+}} ymm1 = ymm0[2,3,0,1]
|
|
|
|
; AVX1-NEXT: vshufps {{.*#+}} ymm0 = ymm0[1,0],ymm1[3,2],ymm0[5,4],ymm1[7,6]
|
|
|
|
; AVX1-NEXT: retq
|
|
|
|
;
|
|
|
|
; AVX2-LABEL: PR22412:
|
|
|
|
; AVX2: # BB#0: # %entry
|
|
|
|
; AVX2-NEXT: vblendpd {{.*#+}} ymm0 = ymm0[0],ymm1[1,2,3]
|
|
|
|
; AVX2-NEXT: vmovaps {{.*#+}} ymm1 = [1,0,7,6,5,4,3,2]
|
|
|
|
; AVX2-NEXT: vpermps %ymm0, %ymm1, %ymm0
|
|
|
|
; AVX2-NEXT: retq
|
|
|
|
entry:
|
|
|
|
%s1 = shufflevector <8 x float> %a, <8 x float> %b, <8 x i32> <i32 0, i32 1, i32 10, i32 11, i32 12, i32 13, i32 14, i32 15>
|
|
|
|
%s2 = shufflevector <8 x float> %s1, <8 x float> undef, <8 x i32> <i32 1, i32 0, i32 7, i32 6, i32 5, i32 4, i32 3, i32 2>
|
|
|
|
ret <8 x float> %s2
|
|
|
|
}
|