llvm-6502/test/CodeGen/Mips/msa/2rf_exup.ll

83 lines
3.1 KiB
LLVM
Raw Normal View History

; Test the MSA floating point conversion intrinsics (e.g. float->double) that
; are encoded with the 2RF instruction format.
; RUN: llc -march=mips -mattr=+msa,+fp64 < %s | FileCheck %s
[mips][msa] Build all the tests in little and big endian modes and correct an incorrect test. Summary: This patch (correctly) breaks some MSA tests by exposing the cases when SelectionDAG::getConstant() produces illegal types. These have been temporarily marked XFAIL and the XFAIL flag will be removed when SelectionDAG::getConstant() is fixed. There are three categories of failure: * Immediate instructions are not selected in one endian mode. * Immediates used in ldi.[bhwd] must be different according to endianness. (this only affects cases where the 'wrong' ldi is used to load the correct bitpattern. E.g. (bitcast:v2i64 (build_vector:v4i32 ...))) * Non-immediate instructions that rely on immediates affected by the previous two categories as part of their match pattern. For example, the bset match pattern is the vector equivalent of 'ws | (1 << wt)'. One test needed correcting to expect different output depending on whether big or little endian was in use. This test was test/CodeGen/Mips/msa/basic_operations.ll and experiences the second category of failure shown above. The little endian version of this test is named basic_operations_little.ll and will be merged back into basic_operations.ll in a follow up commit now that FileCheck supports multiple check prefixes. Reviewers: bkramer, jacksprat, dsanders Reviewed By: dsanders CC: llvm-commits Differential Revision: http://llvm-reviews.chandlerc.com/D1972 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@194806 91177308-0d34-0410-b5e6-96231b3b80d8
2013-11-15 11:04:16 +00:00
; RUN: llc -march=mipsel -mattr=+msa,+fp64 < %s | FileCheck %s
@llvm_mips_fexupl_w_ARG1 = global <8 x half> <half 0.000000e+00, half 1.000000e+00, half 2.000000e+00, half 3.000000e+00, half 4.000000e+00, half 5.000000e+00, half 6.000000e+00, half 7.000000e+00>, align 16
@llvm_mips_fexupl_w_RES = global <4 x float> <float 0.000000e+00, float 0.000000e+00, float 0.000000e+00, float 0.000000e+00>, align 16
define void @llvm_mips_fexupl_w_test() nounwind {
entry:
%0 = load <8 x half>* @llvm_mips_fexupl_w_ARG1
%1 = tail call <4 x float> @llvm.mips.fexupl.w(<8 x half> %0)
store <4 x float> %1, <4 x float>* @llvm_mips_fexupl_w_RES
ret void
}
declare <4 x float> @llvm.mips.fexupl.w(<8 x half>) nounwind
; CHECK: llvm_mips_fexupl_w_test:
; CHECK: ld.h
; CHECK: fexupl.w
; CHECK: st.w
; CHECK: .size llvm_mips_fexupl_w_test
;
@llvm_mips_fexupl_d_ARG1 = global <4 x float> <float 0.000000e+00, float 1.000000e+00, float 2.000000e+00, float 3.000000e+00>, align 16
@llvm_mips_fexupl_d_RES = global <2 x double> <double 0.000000e+00, double 0.000000e+00>, align 16
define void @llvm_mips_fexupl_d_test() nounwind {
entry:
%0 = load <4 x float>* @llvm_mips_fexupl_d_ARG1
%1 = tail call <2 x double> @llvm.mips.fexupl.d(<4 x float> %0)
store <2 x double> %1, <2 x double>* @llvm_mips_fexupl_d_RES
ret void
}
declare <2 x double> @llvm.mips.fexupl.d(<4 x float>) nounwind
; CHECK: llvm_mips_fexupl_d_test:
; CHECK: ld.w
; CHECK: fexupl.d
; CHECK: st.d
; CHECK: .size llvm_mips_fexupl_d_test
;
@llvm_mips_fexupr_w_ARG1 = global <8 x half> <half 0.000000e+00, half 1.000000e+00, half 2.000000e+00, half 3.000000e+00, half 4.000000e+00, half 5.000000e+00, half 6.000000e+00, half 7.000000e+00>, align 16
@llvm_mips_fexupr_w_RES = global <4 x float> <float 0.000000e+00, float 0.000000e+00, float 0.000000e+00, float 0.000000e+00>, align 16
define void @llvm_mips_fexupr_w_test() nounwind {
entry:
%0 = load <8 x half>* @llvm_mips_fexupr_w_ARG1
%1 = tail call <4 x float> @llvm.mips.fexupr.w(<8 x half> %0)
store <4 x float> %1, <4 x float>* @llvm_mips_fexupr_w_RES
ret void
}
declare <4 x float> @llvm.mips.fexupr.w(<8 x half>) nounwind
; CHECK: llvm_mips_fexupr_w_test:
; CHECK: ld.h
; CHECK: fexupr.w
; CHECK: st.w
; CHECK: .size llvm_mips_fexupr_w_test
;
@llvm_mips_fexupr_d_ARG1 = global <4 x float> <float 0.000000e+00, float 1.000000e+00, float 2.000000e+00, float 3.000000e+00>, align 16
@llvm_mips_fexupr_d_RES = global <2 x double> <double 0.000000e+00, double 0.000000e+00>, align 16
define void @llvm_mips_fexupr_d_test() nounwind {
entry:
%0 = load <4 x float>* @llvm_mips_fexupr_d_ARG1
%1 = tail call <2 x double> @llvm.mips.fexupr.d(<4 x float> %0)
store <2 x double> %1, <2 x double>* @llvm_mips_fexupr_d_RES
ret void
}
declare <2 x double> @llvm.mips.fexupr.d(<4 x float>) nounwind
; CHECK: llvm_mips_fexupr_d_test:
; CHECK: ld.w
; CHECK: fexupr.d
; CHECK: st.d
; CHECK: .size llvm_mips_fexupr_d_test
;