------------------------------------------------------------------------
r243633 | dsanders | 2015-07-30 11:14:57 +0100 (Thu, 30 Jul 2015) | 11 lines
[test-release.sh] Add -no-libunwind to disable it on targets that don't support it.
Summary:
Mips doesn't implement unw_getcontext() or libunwind::Registers_*::jumpto() yet
so we must disable libunwind for this release.
Reviewers: hans
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11563
------------------------------------------------------------------------
git-svn-id: https://llvm.org/svn/llvm-project/llvm/branches/release_37@243634 91177308-0d34-0410-b5e6-96231b3b80d8
------------------------------------------------------------------------
r243531 | hans | 2015-07-29 09:29:06 -0700 (Wed, 29 Jul 2015) | 7 lines
test-release.sh: Add option for building the OpenMP run-time
This isn't part of the official release process, but provides a convenient way
to build binaries for those who want to experiment with it. Hopefully the run-
time can be part of the regular build and release process for 3.8.
Differential Revision: http://reviews.llvm.org/D11494
------------------------------------------------------------------------
git-svn-id: https://llvm.org/svn/llvm-project/llvm/branches/release_37@243537 91177308-0d34-0410-b5e6-96231b3b80d8
------------------------------------------------------------------------
r243116 | hans | 2015-07-24 09:16:09 -0700 (Fri, 24 Jul 2015) | 10 lines
test-release.sh: Defer test errors until the end
This makes the script run to the end and produce tarballs even on test
failures, and then highlights any errors afterwards.
(I first tried just storing the errors in a global variable, but that
didn't work as the "test_llvmCore" function invocation is actually
running as a sub-shell.)
Differential Revision: http://reviews.llvm.org/D11478
------------------------------------------------------------------------
git-svn-id: https://llvm.org/svn/llvm-project/llvm/branches/release_37@243117 91177308-0d34-0410-b5e6-96231b3b80d8
------------------------------------------------------------------------
r242919 | rengolin | 2015-07-22 11:21:39 -0700 (Wed, 22 Jul 2015) | 8 lines
[Release] Allow release testers to disable certain components
Not all components build correctly on all targets and the release
script had no way to disable them other than editing the script locally.
This change provides a way to disable the test-suite, compiler-rt and
the libraries, as well as allowing you to re-run on the same directory
without checking out all sources again.
------------------------------------------------------------------------
git-svn-id: https://llvm.org/svn/llvm-project/llvm/branches/release_37@242937 91177308-0d34-0410-b5e6-96231b3b80d8
------------------------------------------------------------------------
r242722 | dim | 2015-07-20 15:24:40 -0700 (Mon, 20 Jul 2015) | 6 lines
Avoid early pipefail exits due to grep failures in stage comparisons.
If objects or executables did not contain any RPATH, grep would return
nonzero, and the whole stage comparison loop would unexpectedly exit.
Fix this by checking the grep result explicitly.
------------------------------------------------------------------------
git-svn-id: https://llvm.org/svn/llvm-project/llvm/branches/release_37@242861 91177308-0d34-0410-b5e6-96231b3b80d8
------------------------------------------------------------------------
r242721 | dim | 2015-07-20 15:07:27 -0700 (Mon, 20 Jul 2015) | 4 lines
Since BSD cmp(1) does not support the --ignore-initial option, use the
more portable 3rd and 4th arguments to skip the first 16 bytes during
the comparison of Phase2 and Phase3 objects.
------------------------------------------------------------------------
git-svn-id: https://llvm.org/svn/llvm-project/llvm/branches/release_37@242860 91177308-0d34-0410-b5e6-96231b3b80d8
------------------------------------------------------------------------
r242341 | hans | 2015-07-15 15:18:25 -0700 (Wed, 15 Jul 2015) | 7 lines
test-release.sh: Run both .o files through sed before comparing them
On some systems (e.g. Mac OS X), sed will add a newline to the end of
the output if there wasn't one already. This would cause false
cmp errors since the .o file from Phase 2 was passed through sed and
the one from Phase 3 wasn't. Work around this by passing both through
sed.
------------------------------------------------------------------------
git-svn-id: https://llvm.org/svn/llvm-project/llvm/branches/release_37@242361 91177308-0d34-0410-b5e6-96231b3b80d8
------------------------------------------------------------------------
r242331 | hans | 2015-07-15 14:06:16 -0700 (Wed, 15 Jul 2015) | 17 lines
Switch the release script to build with CMake by default (PR21561)
It retains the possibility to use the autoconf build with a
command-line option ('-use-autoconf'), and uses that by default on Darwin since
compiler-rt requires it on that platform.
This commit also removes the "Release-64" flavour and related logic. The script
would previously do two builds unless the '-no-64bit' flag was passed, but on
my machine and from those I asked this always ended up producing two 64-bit builds,
causing much confusion.
It also removes the -build-triple option, which caused the --build= flag to
get passed to ./configure. This was presumably intended for cross-compiling,
but none of the release testers use it. If someone does want to pass it,
they can use '-configure-flags --build=foo' instead.
Differential Revision: http://reviews.llvm.org/D10715
------------------------------------------------------------------------
git-svn-id: https://llvm.org/svn/llvm-project/llvm/branches/release_37@242360 91177308-0d34-0410-b5e6-96231b3b80d8
* Use the default install prefix (/usr/local) and use DESTDIR instead to
set a temporary install location for tarballing. This is the correct
way to package binary releases (otherwise the temporary install path
ends up in files in the binary release).
* Remove ``-disable-clang`` option. It did not work correctly
(tarballing assumed phase 3 was run) and when doing a release
we should always be doing a three-phased build and test.
Note: Technically we should only be using DESTDIR for the third phase
and use --prefix for the first and second phase because we run the built
clang from phase 1 and 2 (and in general an application's behaviour
may depend on the install prefix). However in the case of clang it
seems to not care what the install prefix was so to simplify the script
we use DESTDIR for all three stages.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242187 91177308-0d34-0410-b5e6-96231b3b80d8
of the build stages that are sent through a pipe (e.g. tee) failed.
This potentially allowed builds and/or tests to fail without anyone
noticing. It appears that for the LLVM 3.6.[01] releases this actually
happened for the Ubuntu 14.04LTS binary releases. The essence of the
issue is that without ``set -o pipefail`` the following command in bash
has a zero exit code.
false | tee /dev/null ; exit $?
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241599 91177308-0d34-0410-b5e6-96231b3b80d8
r236077 and r236081 dropped Dragonegg support from the release scripts
but left some pieces. The most notable change is that Dragonegg won't
be tagged any more.
Patch by David Wiberg <dwiberg@gmail.com>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238753 91177308-0d34-0410-b5e6-96231b3b80d8
Instead, just present the command for committing it. This way,
the user can test the merge locally, resolve conflicts, etc.
before committing, which seems much safer to me.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225737 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
I currently have to specify --build=mips-linux-gnu or --build=mipsel-linux-gnu
to configure in order to successfully recurse a 32-bit build of the compiler on
my mips64-linux-gnu and mips64el-linux-gnu targets. This is a bug and will be
fixed but in the meantime it will be useful to have a way to work around this.
Reviewers: tstellarAMD
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6522
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223369 91177308-0d34-0410-b5e6-96231b3b80d8
--disable-timestamps was added to the configure command way back in r142647 but
the command that echos this command to the log was not updated at the time.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223351 91177308-0d34-0410-b5e6-96231b3b80d8
The -triple option is used to create a named tarball of the release binaries.
Also disable the RPATH modifications on Mac OS X. It's not needed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195193 91177308-0d34-0410-b5e6-96231b3b80d8
libtool sets RPATH to "$ORIGIN/../lib:/the/directory/where/it/was/built/lib" so that a developper can use the built or the installed version seamlessly. Our binary packages should not have this developer friendly tweak, as the users of the binaries will not have the build tree.
Beside, in case the development tree is a possibly on an automounted share, this can create very bad user experience : they will incur an automount timeout penalty and will get a very bad feeling of llvm/clang's speed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@194999 91177308-0d34-0410-b5e6-96231b3b80d8
Daniel Sanders
Hans Wennborg
Dan Liew
Bill Wendling
Tom Stellard
Arnaud A. de Grandmaison
Duncan Sands
Sylvestre Ledru