This code:
float floatingPointComparison(float x, float y) {
double product = (double)x * y;
if (product == 0.0)
return product;
return product - 1.0;
}
produces this:
_floatingPointComparison:
0000000000000000 cvtss2sd %xmm1,%xmm1
0000000000000004 cvtss2sd %xmm0,%xmm0
0000000000000008 mulsd %xmm1,%xmm0
000000000000000c pxor %xmm1,%xmm1
0000000000000010 ucomisd %xmm1,%xmm0
0000000000000014 jne 0x00000004
0000000000000016 jp 0x00000002
0000000000000018 jmp 0x00000008
000000000000001a addsd 0x00000006(%rip),%xmm0
0000000000000022 cvtsd2ss %xmm0,%xmm0
0000000000000026 ret
The "jne/jp/jmp" sequence can be reduced to this instead:
_floatingPointComparison:
0000000000000000 cvtss2sd %xmm1,%xmm1
0000000000000004 cvtss2sd %xmm0,%xmm0
0000000000000008 mulsd %xmm1,%xmm0
000000000000000c pxor %xmm1,%xmm1
0000000000000010 ucomisd %xmm1,%xmm0
0000000000000014 jp 0x00000002
0000000000000016 je 0x00000008
0000000000000018 addsd 0x00000006(%rip),%xmm0
0000000000000020 cvtsd2ss %xmm0,%xmm0
0000000000000024 ret
for a savings of 2 bytes.
This xform can happen when we recognize that jne and jp jump to the same "true"
MBB, the unconditional jump would jump to the "false" MBB, and the "true" branch
is the fall-through MBB.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97766 91177308-0d34-0410-b5e6-96231b3b80d8
an undef value. This is only going to come up for bugpoint-reduced tests --
correct programs will not access memory at undefined addresses -- so it's not
worth the effort of doing anything more aggressive.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97745 91177308-0d34-0410-b5e6-96231b3b80d8
These instructions technically define AL,AH, but a trick in X86ISelDAGToDAG
reads AX in order to avoid reading AH with a REX instruction.
Fix PR6489.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97742 91177308-0d34-0410-b5e6-96231b3b80d8
IF(condition(value)):
If the value satisfies the condition, the line is processed by lit; otherwise
it is skipped. A test with no unignored directives is resolved as Unsupported.
The test suite is responsible for defining conditions; conditions are unary
functions over strings. I've defined two conditions in the LLVM test suite,
TARGET (with values like those in TARGETS_TO_BUILD) and BINDING (with values
like those in llvm_bindings). So for example you can write:
IF(BINDING(ocaml)): RUN: %blah %s -o -
and the RUN line will only execute if LLVM was configured with the ocaml
bindings.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97726 91177308-0d34-0410-b5e6-96231b3b80d8
transformation much more careful. Truncating binary '01' to '1' sounds like it's
safe until you realize that it switched from positive to negative under a signed
interpretation, and that depends on the icmp predicate.
Also a few miscellaneous cleanups.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97721 91177308-0d34-0410-b5e6-96231b3b80d8
long test(long x) { return (x & 123124) | 3; }
Currently compiles to:
_test:
orl $3, %edi
movq %rdi, %rax
andq $123127, %rax
ret
This is because instruction and DAG combiners canonicalize
(or (and x, C), D) -> (and (or, D), (C | D))
However, this is only profitable if (C & D) != 0. It gets in the way of the
3-addressification because the input bits are known to be zero.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97616 91177308-0d34-0410-b5e6-96231b3b80d8
CopyToReg/CopyFromReg/INLINEASM. These are annoying because
they have the same opcode before an after isel. Fix this by
setting their NodeID to -1 to indicate that they are selected,
just like what automatically happens when selecting things that
end up being machine nodes.
With that done, give IsLegalToFold a new flag that causes it to
ignore chains. This lets the HandleMergeInputChains routine be
the one place that validates chains after a match is successful,
enabling the new hotness in chain processing. This smarter
chain processing eliminates the need for "PreprocessRMW" in the
X86 and MSP430 backends and enables MSP to start matching it's
multiple mem operand instructions more aggressively.
I currently #if out the dead code in the X86 backend and MSP
backend, I'll remove it for real in a follow-on patch.
The testcase changes are:
test/CodeGen/X86/sse3.ll: we generate better code
test/CodeGen/X86/store_op_load_fold2.ll: PreprocessRMW was
miscompiling this before, we now generate correct code
Convert it to filecheck while I'm at it.
test/CodeGen/MSP430/Inst16mm.ll: Add a testcase for mem/mem
folding to make anton happy. :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97596 91177308-0d34-0410-b5e6-96231b3b80d8
by loop depth and emit loop-invariant subexpressions outside of loops.
This speeds up MultiSource/Applications/viterbi and others.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97580 91177308-0d34-0410-b5e6-96231b3b80d8
was that we weren't properly handling the case when interior
nodes of a matched pattern become dead after updating chain
and flag uses. Now we handle this explicitly in
UpdateChainsAndFlags.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97561 91177308-0d34-0410-b5e6-96231b3b80d8
stuff now that we don't care about emulating the old broken
behavior of the old isel. This eliminates the
'CheckChainCompatible' check (along with IsChainCompatible) which
did an incorrect and inefficient scan *up* the chain nodes which
happened as the pattern was being formed and does the validation
at the end in HandleMergeInputChains when it forms a structural
pattern. This scans "down" the graph, which means that it is
quickly bounded by nodes already selected. This also handles
token factors that get "trapped" in the dag.
Removing the CheckChainCompatible nodes also shrinks the
generated tables by about 6K for X86 (down to 83K).
There are two pieces remaining before I can nuke PreprocessRMW:
1. I xfailed a test because we're now producing worse code in a
case that has nothing to do with the change: it turns out that
our use of MorphNodeTo will leave dead nodes in the graph
which (depending on how the graph is walked) end up causing
bogus uses of chains and blocking matches. This is really
bad for other reasons, so I'll fix this in a follow-up patch.
2. CheckFoldableChainNode needs to be improved to handle the TF.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97539 91177308-0d34-0410-b5e6-96231b3b80d8
ordered correctly. Previously it would get in trouble when
two patterns were too similar and give them nondet ordering.
We force this by using the record ID order as a fallback.
The testsuite diff is due to alpha patterns being ordered
slightly differently, the change is a semantic noop afaict:
< lda $0,-100($16)
---
> subq $16,100,$0
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97509 91177308-0d34-0410-b5e6-96231b3b80d8
payloads. APFloat's internal folding routines always make QNaNs now,
instead of sometimes making QNaNs and sometimes SNaNs depending on the
type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97364 91177308-0d34-0410-b5e6-96231b3b80d8
The PowerPC floating point registers can represent both f32 and f64 via the
two register classes F4RC and F8RC. F8RC is considered a subclass of F4RC to
allow cross-class coalescing. This coalescing only affects whether registers
are spilled as f32 or f64.
Spill slots must be accessed with load/store instructions corresponding to the
class of the spilled register. PPCInstrInfo::foldMemoryOperandImpl was looking
at the instruction opcode which is wrong.
X86 has similar floating point register classes, but doesn't try to fold
memory operands, so there is no problem there.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97262 91177308-0d34-0410-b5e6-96231b3b80d8
Previously LoopStrengthReduce would sometimes be unable to find
a legal formula, causing an assertion failure.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97226 91177308-0d34-0410-b5e6-96231b3b80d8
about this, but it can be useful for users who use ccache, since the LLVMC tests
are fond of calling gcc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97171 91177308-0d34-0410-b5e6-96231b3b80d8
instead of to have a chained series of scope nodes. This makes
the generated table smaller, improves the efficiency of the
interpreter, and make the factoring optimization much more
reasonable to implement.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97160 91177308-0d34-0410-b5e6-96231b3b80d8
section with TextAlignFillValue and calls EmitCodeAlignment() instead of
calling EmitValueToAlignment(). This allows x86 assembly code to be aligned
with optimal nops.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97158 91177308-0d34-0410-b5e6-96231b3b80d8
terms of store and load, which means bitcasting between scalar
integer and vector has endian-specific results, which undermines
this whole approach.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97137 91177308-0d34-0410-b5e6-96231b3b80d8
which branch on undef to branch on a boolean constant for the edge
exiting the loop. This helps ScalarEvolution compute trip counts for
loops.
Teach ScalarEvolution to recognize single-value PHIs, when safe, and
ForgetSymbolicName to forget such single-value PHI nodes as apprpriate
in ForgetSymbolicName.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97126 91177308-0d34-0410-b5e6-96231b3b80d8
- Function uses all scratch registers AND
- Function does not use any callee saved registers AND
- Stack size is too big to address with immediate offsets.
In this case a register must be scavenged to calculate the address of a stack
object, and the scavenger needs a spare register or emergency spill slot.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97071 91177308-0d34-0410-b5e6-96231b3b80d8
greater-than-or-equal SELECT_CCs to NEON vmin/vmax instructions. This is
only allowed when UnsafeFPMath is set or when at least one of the operands
is known to be nonzero.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97065 91177308-0d34-0410-b5e6-96231b3b80d8
the number of value bits, not the number of bits of allocation for in-memory
storage.
Make getTypeStoreSize and getTypeAllocSize work consistently for arrays and
vectors.
Fix several places in CodeGen which compute offsets into in-memory vectors
to use TargetData information.
This fixes PR1784.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97064 91177308-0d34-0410-b5e6-96231b3b80d8
necessary to swap the operands to handle NaN and negative zero properly.
Also, reintroduce logic for checking for NaN conditions when forming
SSE min and max instructions, fixed to take into consideration NaNs and
negative zeros. This allows forming min and max instructions in more
cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97025 91177308-0d34-0410-b5e6-96231b3b80d8
to adding them in a determinstic order (bottom up from
the root) based on the structure of the graph itself.
This updates tests for some random changes, interesting
bits: CodeGen/Blackfin/promote-logic.ll no longer crashes.
I have no idea why, but that's good right?
CodeGen/X86/2009-07-16-LoadFoldingBug.ll also fails, but
now compiles to have one fewer constant pool entry, making
the expected load that was being folded disappear. Since it
is an unreduced mass of gnast, I just removed it.
This fixes PR6370
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97023 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, LiveIntervalAnalysis would infer phi joins by looking for multiply
defined registers. That doesn't work if the phi join is implicitly defined in
all but one of the predecessors.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@96994 91177308-0d34-0410-b5e6-96231b3b80d8
getelementptr. Despite only doing so in the case where x is a known
array object and c can be converted to an index within range, this
could still be invalid if c is actually the address of an object
allocated outside of LLVM. Also, SCEVExpander, the original motivation
for this code, has since been improved to avoid inttoptr+ptroint in
more cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@96950 91177308-0d34-0410-b5e6-96231b3b80d8
