Commit Graph

285 Commits

Author SHA1 Message Date
Juergen Ributzka
15067a64a9 [Object] Don't crash on empty export lists.
Summary: This fixes the exports iterator if the export list is empty.

Reviewers: Bigcheese, kledzik

Subscribers: llvm-commits

Differential Revision: http://reviews.llvm.org/D6732

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224563 91177308-0d34-0410-b5e6-96231b3b80d8
2014-12-19 02:31:01 +00:00
Rafael Espindola
96b7967f83 Start adding thin archive support.
This is just sufficient for 'ar t' to work.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224307 91177308-0d34-0410-b5e6-96231b3b80d8
2014-12-16 01:43:41 +00:00
Jean-Daniel Dupas
9ce01153e0 Add missing test file
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223346 91177308-0d34-0410-b5e6-96231b3b80d8
2014-12-04 09:20:13 +00:00
Jean-Daniel Dupas
206b84f324 Add mach-o LC_RPATH support to llvm-objdump
Summary: Add rpath load command support in Mach-O object and update llvm-objdump to use it.

Subscribers: llvm-commits

Differential Revision: http://reviews.llvm.org/D6512

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223343 91177308-0d34-0410-b5e6-96231b3b80d8
2014-12-04 07:37:02 +00:00
Will Newton
e40dbd6233 Widen ELFYAML relocation type to 32 bits
The current 8 bits is sufficient for ELF32 targets but ELF64 requires
32 bits. Add a test for AArch64 that exposes the issue.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222898 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-27 17:20:48 +00:00
Simon Atanasyan
c5e9bf54c7 [Object][Mips] Return address of MIPS symbol with cleared microMIPS indicator bit
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222726 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-25 05:57:55 +00:00
Nick Kledzik
9abbcb7453 Object, support both mach-o archive t.o.c file names
For historical reasons archives on mach-o have two possible names for the 
file containing the table of contents for the archive: "__.SYMDEF SORTED" 
and "__.SYMDEF".  But the libObject archive reader only supported the former.

This patch fixes llvm::object::Archive to support both names.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221747 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-12 01:37:45 +00:00
Chad Rosier
daeae53efc [yaml2obj] Support AArch64 relocations.
Patch by Daniel Stewart <stewartd@codeaurora.org>!
Phabricator Revision: http://reviews.llvm.org/D6192

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221639 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-10 23:02:03 +00:00
Simon Atanasyan
848edb1bfa [ELF][yaml2obj] Handle additional MIPS specific st_other field flags
The ELF symbol `st_other` field might contain additional flags besides
visibility ones. This patch implements support for some MIPS specific
flags.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221491 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-06 22:46:24 +00:00
Kevin Enderby
3b80486e3a Plumb in the ARM thumb symbolizer in llvm-objdump’s Mach-O disassembler and
add the code and test cases for 32-bit ARM symbolizer.

Also fixed the printing of data in code as it was not using the table correctly
and needed to fix one of the test cases too.

This will break lld’s test/mach-o/arm-interworking-movw.yaml till the tweak
for that is made. Which I’ll be committing immediately after this commit.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221470 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-06 19:00:13 +00:00
David Majnemer
42b17f97cf Object, COFF: Infer symbol sizes from adjacent symbols
Use the position of the subsequent symbol in the object file to infer
the size of it's predecessor.  I hope to eventually remove whatever COFF
specific details from this little algorithm so that we can unify this
logic with what Mach-O does.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221444 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-06 08:10:41 +00:00
NAKAMURA Takumi
76614e7991 Remove "REQUIRES:shell" from tests. They work for me.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221269 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-04 13:41:33 +00:00
Simon Atanasyan
f7f14da355 [yaml2obj] Allow yaml2obj tool to recognize EF_MIPS_NAN2008 flag
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221268 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-04 13:33:36 +00:00
NAKAMURA Takumi
12fcb9cf0d Re-enable tests in llvm/test/Object, corresponding to line_iterator's
change in r221153.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221265 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-04 13:19:29 +00:00
Rafael Espindola
9586f1a56a Add CRLF support to LineIterator.
The MRI scripts have to work with CRLF, and in general it is probably
a good idea to support this in a core utility like LineIterator.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221153 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-03 14:09:47 +00:00
David Majnemer
a2715904e5 Object, COFF: Cleanup symbol type code, improve binutils compatibility
Do a better job classifying symbols.  This increases the consistency
between the COFF handling code and the ELF side of things.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220952 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-31 05:07:00 +00:00
Jan Wen Voung
3262c451c4 Fix getRelocationValueString to return the symbol name for EM_386.
Summary: This helps llvm-objdump -r to print out the symbol name along
with the relocation type on x86. Adjust existing tests from checking
for "Unknown" to check for the symbol now.

Test Plan: Adjusted test/Object tests.

Subscribers: llvm-commits

Differential Revision: http://reviews.llvm.org/D5987

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220866 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-29 18:37:13 +00:00
Rafael Espindola
230b53fd1b Handle spaces and quotes in file names in MRI scripts.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220364 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-22 03:10:56 +00:00
Rafael Espindola
f6b403a753 MRI scripts: Add addlib support.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220346 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-21 23:18:51 +00:00
Rafael Espindola
e539932aad Overwrite instead of adding to archives when creating them in mri scripts.
This matches the behavior of GNU ar and also makes it easier to implemnt
support for the addlib command.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220336 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-21 21:56:47 +00:00
Rafael Espindola
2afb0e4d2c Add support for addmod to mri scripts.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220294 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-21 14:46:17 +00:00
NAKAMURA Takumi
5395265ede Suppress llvm-ar's MRI tests for now on win32, since line_iterator is incompatible to CRLF.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219579 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-11 22:21:27 +00:00
Rafael Espindola
f02687d9eb llvm-ar: Start adding support for mri scripts.
I was quiet surprised to find this feature being used. Fortunately the uses
I found look fairly simple. In fact, they are just a very verbose version
of the regular ar commands.

Start implementing it then by parsing the script and setting the command
variables as if we had a regular command line.

This patch adds just enough support to create an empty archive and do a bit
of error checking. In followup patches I will implement at least addmod
and addlib.

From the description in the manual, even the more general case should not
be too hard to implement if needed. The features that don't map 1:1 to
the simple command line are

* Reading from multiple archives.
* Creating multiple archives.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219521 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-10 18:33:51 +00:00
David Majnemer
afb7eea976 Add tests for r219479.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219480 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-10 06:59:05 +00:00
David Majnemer
54a3b749e1 obj2yaml, COFF: Handle long section names
Long section names are represented as a slash followed by a numeric
ASCII string.  This number is an offset into a string table.

Print the appropriate entry in the string table instead of the less
enlightening /4.

N.B.  yaml2obj already does the right thing, this test exercises both
sides of the (de-)serialization.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219458 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-10 00:17:57 +00:00
Rafael Espindola
8e5fbd755f Correctly compute the size of common symbols in COFF.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219324 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-08 17:37:19 +00:00
Rafael Espindola
c5dc4aa8ad Print symbol sizes in this test in preparation for fixing COFF common sizes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219320 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-08 17:19:42 +00:00
Sean Silva
73d86aa56a Nuke MCAnalysis.
The code is buggy and barely tested. It is also mostly boilerplate.
(This includes MCObjectDisassembler, which is the interface to that
functionality)

Following an IRC discussion with Jim Grosbach, it seems sensible to just
nuke the whole lot of functionality, and dig it up from VCS if
necessary (I hope not!).

All of this stuff appears to have been added in a huge patch dump (look
at the timeframe surrounding e.g. r182628) where almost every patch
seemed to be untested and not reviewed before being committed.
Post-review responses to the patches were never addressed. I don't think
any of it would have passed pre-commit review.

I doubt anyone is depending on this, since this code appears to be
extremely buggy. In limited testing that Michael Spencer and I did, we
couldn't find a single real-world object file that wouldn't crash the
CFG reconstruction stuff. The symbolizer stuff has O(n^2) behavior and
so is not much use to anyone anyway. It seemed simpler to remove them as
a whole. Most of this code is boilerplate, which is the only way it was
able to scrape by 60% coverage.

HEADSUP: Modules folks, some files I nuked were referenced from
include/llvm/module.modulemap; I just deleted the references. Hopefully
that is the right fix (one was a FIXME though!).

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216983 91177308-0d34-0410-b5e6-96231b3b80d8
2014-09-02 22:32:20 +00:00
Rafael Espindola
78e8d52a58 llvm-objdump: don't print relocations in non-relocatable files.
This matches the behavior of GNU objdump.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215844 91177308-0d34-0410-b5e6-96231b3b80d8
2014-08-17 19:09:37 +00:00
Rafael Espindola
4c511cd88f Fix an off-by-one bug in the target independent llvm-objdump.
It would prevent the display of a single byte instruction before a label.

Patch by Steve King!

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215837 91177308-0d34-0410-b5e6-96231b3b80d8
2014-08-17 16:31:39 +00:00
Rafael Espindola
d272237f0b pr20589: Fix duplicated arch flag.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215216 91177308-0d34-0410-b5e6-96231b3b80d8
2014-08-08 16:18:29 +00:00
Rafael Espindola
d57120551f Use "weak alias" instead of "alias weak"
Before this patch we had

@a = weak global ...
but
@b = alias weak ...

The patch changes aliases to look more like global variables.

Looking at some really old code suggests that the reason was that the old
bison based parser had a reduction for alias linkages and another one for
global variable linkages. Putting the alias first avoided the reduce/reduce
conflict.

The days of the old .ll parser are long gone. The new one parses just "linkage"
and a later check is responsible for deciding if a linkage is valid in a
given context.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214355 91177308-0d34-0410-b5e6-96231b3b80d8
2014-07-30 22:51:54 +00:00
Kevin Enderby
0ee7d91abd Tweak llvm-nm’s -undefined-only (aka -u) printing for Mach-O files
to just print the symbol name.  So it matches darwin’s nm(1) -u option.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214143 91177308-0d34-0410-b5e6-96231b3b80d8
2014-07-28 23:17:38 +00:00
Kevin Enderby
fb0326ce1b Add an implementation for llvm-nm’s -print-file-name option (aka -o and -A).
The -print-file-name option in llvm-nm is to precede each symbol
with the object file it came from.  While code for the parsing of this
option and its aliases existed there was no code to implement it.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213906 91177308-0d34-0410-b5e6-96231b3b80d8
2014-07-24 23:31:52 +00:00
Kevin Enderby
c61aa0219e Add printing of Mach-O stabs in llvm-nm.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213327 91177308-0d34-0410-b5e6-96231b3b80d8
2014-07-17 22:47:16 +00:00
Kevin Enderby
15f2c50e63 Add the "-x" flag to llvm-nm for Mach-O files that prints the fields of a symbol in hex.
(generally use for debugging the tools).  This is same functionality as darwin’s
nm(1) "-x" flag.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213176 91177308-0d34-0410-b5e6-96231b3b80d8
2014-07-16 17:38:26 +00:00
Simon Atanasyan
b2b56ed1a6 [Mips] Support SHT_MIPS_ABIFLAGS section type flag in the llvm-readobj,
obj2yaml and yaml2obj tools.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212908 91177308-0d34-0410-b5e6-96231b3b80d8
2014-07-13 15:28:54 +00:00
Simon Atanasyan
dafce2c9a6 [ELFYAML] Group ELF section type flags to target specific blocks.
Recognize only flags which correspond to the current target.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212880 91177308-0d34-0410-b5e6-96231b3b80d8
2014-07-12 18:25:08 +00:00
Kevin Enderby
7f50100cfa Add the "-s" flag to llvm-nm for Mach-O files that prints symbols only in
the specified section.  This is same functionality as darwin’s nm(1) "-s" flag.

There is one FIXME in the code and I’m all ears to anyone that can help me
with that.  This option takes exactly two strings and should be allowed
anywhere on the command line.  Such that "llvm-nm -s __TEXT __text foo.o"
would work. But that does not as the CommandLine Library does not have a
way to make this work as far as I can tell.  For now the "-s __TEXT __text"
has to be last on the command line.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212842 91177308-0d34-0410-b5e6-96231b3b80d8
2014-07-11 20:30:00 +00:00
Kevin Enderby
e3108d31e0 Changed the lvm-nm alias "-s" for -print-armap to "-M".
This will allow the "-s" flag to implemented in the future as it
is in darwin’s nm(1) to list symbols only in the specified section.

Given a LGTM by Shankar Easwaran who originally implemented
the support for lvm-nm’s -print-armap and archive map symbols.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212576 91177308-0d34-0410-b5e6-96231b3b80d8
2014-07-08 23:47:31 +00:00
Kevin Enderby
d2ae11527a Add support for BSD format Archive map symbols (aka the table of contents
from a __.SYMDEF or "__.SYMDEF SORTED" archive member).


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212568 91177308-0d34-0410-b5e6-96231b3b80d8
2014-07-08 22:10:02 +00:00
Rafael Espindola
8089fee2dd Ignore llvm.* globals.
It is not clear if llvm.global_ctors should or should not be in llvm.metadata,
but in practice it is not and we need to ignore it for LTO.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212351 91177308-0d34-0410-b5e6-96231b3b80d8
2014-07-04 19:08:22 +00:00
Rafael Espindola
40b9d67109 Mark intrinsic functions as llvm-specific.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212347 91177308-0d34-0410-b5e6-96231b3b80d8
2014-07-04 15:58:00 +00:00
Rafael Espindola
ada0f6a93e Don't include llvm.metadata variables in archive symbol tables.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212344 91177308-0d34-0410-b5e6-96231b3b80d8
2014-07-04 15:03:17 +00:00
Kevin Enderby
26272defb6 Add the -just-symbol-name (aka -j) flag to llvm-nm to just print the
symbol’s name.  On darwin the -j flag is used (often in combinations
with other flags) to produce a complete list of symbol names which
than can then be reorder and used with ld(1)’s -order_file.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212294 91177308-0d34-0410-b5e6-96231b3b80d8
2014-07-03 21:51:07 +00:00
Rafael Espindola
95c1ba668f Move test since it now depends on the x86 backend.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212289 91177308-0d34-0410-b5e6-96231b3b80d8
2014-07-03 20:26:21 +00:00
Rafael Espindola
96052a8d12 Add support for inline asm symbols in llvm-ar.
This should allow llvm-ar to be used instead of gnu ar + plugin in a LTO
build. I will add a release note about it once I finish a LTO bootstrap with it.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212287 91177308-0d34-0410-b5e6-96231b3b80d8
2014-07-03 19:40:08 +00:00
Rafael Espindola
0a7a2ef6b5 Add support for inline asm symbols to IRObjectFile.
This also enables it in llvm-nm so that it can be tested.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212282 91177308-0d34-0410-b5e6-96231b3b80d8
2014-07-03 18:59:23 +00:00
Kevin Enderby
c150516f36 Add the -U flag to llvm-nm as an alias to -defined-only
as darwin’s nm(1) uses -U for this functionality.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212280 91177308-0d34-0410-b5e6-96231b3b80d8
2014-07-03 18:18:50 +00:00
Kevin Enderby
1faddea960 Add the -reverse-sort flag (aka -r) to llvm-nm
which exists in other Unix nm(1)’s.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212235 91177308-0d34-0410-b5e6-96231b3b80d8
2014-07-02 23:23:58 +00:00