[DebugInfo] Add debug locations to constant SD nodes
This adds debug location to constant nodes of Selection DAG and updates
all places that create constants to pass debug locations
(see PR13269).
Can't guarantee that all locations are correct, but in a lot of cases choice
is obvious, so most of them should be. At least all tests pass.
Tests for these changes do not cover everything, instead just check it for
SDNodes, ARM and AArch64 where it's easy to get incorrect locations on
constants.
This is not complete fix as FastISel contains workaround for wrong debug
locations, which drops locations from instructions on processing constants,
but there isn't currently a way to use debug locations from constants there
as llvm::Constant doesn't cache it (yet). Although this is a bit different
issue, not directly related to these changes.
Differential Revision: http://reviews.llvm.org/D9084
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235989 91177308-0d34-0410-b5e6-96231b3b80d8
This adds debug location to constant nodes of Selection DAG and updates
all places that create constants to pass debug locations
(see PR13269).
Can't guarantee that all locations are correct, but in a lot of cases choice
is obvious, so most of them should be. At least all tests pass.
Tests for these changes do not cover everything, instead just check it for
SDNodes, ARM and AArch64 where it's easy to get incorrect locations on
constants.
This is not complete fix as FastISel contains workaround for wrong debug
locations, which drops locations from instructions on processing constants,
but there isn't currently a way to use debug locations from constants there
as llvm::Constant doesn't cache it (yet). Although this is a bit different
issue, not directly related to these changes.
Differential Revision: http://reviews.llvm.org/D9084
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235977 91177308-0d34-0410-b5e6-96231b3b80d8
I previously thought switch clusters would need to use uint64_t in case
the weights of multiple cases overflowed a 32-bit int. It turns
out that the weights on a terminator instruction are capped to allow for
being added together, so using a uint32_t should be safe.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235945 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, the code would try to put a fall-through case last,
even if that meant moving a case with much higher branch weight
further down the chain.
Ordering by branch weight is most important, putting a fall-through
block last is secondary.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235942 91177308-0d34-0410-b5e6-96231b3b80d8
Looking into 23095, my best guess is that the CodeGen library itself isn't getting linked and initialized properly. To make this slightly more obvious to consumers of LLVM, emit a different error message if we can tell that the registry is empty vs you've simply happened to name a collector which hasn't been registered.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235824 91177308-0d34-0410-b5e6-96231b3b80d8
right scaling.
In the function canFoldInAddressingMode, VT is computed as the type of the
destination/source of a LOAD/STORE operations, instead of the memory type of the
operation.
On targets with a scaling factor on the offset of the LOAD/STORE operations, the
function may return false for actually valid cases. This may then prevent the
selection of profitable pre or post indexed load/store operations, and instead
select pre or post indexed load/store for unprofitable cases.
Patch by Francois de Ferriere <francois.de-ferriere@st.com>!
Differential Revision: http://reviews.llvm.org/D9146
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235780 91177308-0d34-0410-b5e6-96231b3b80d8
This introduces an intrinsic called llvm.eh.exceptioncode. It is lowered
by copying the EAX value live into whatever basic block it is called
from. Obviously, this only works if you insert it late during codegen,
because otherwise mid-level passes might reschedule it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235768 91177308-0d34-0410-b5e6-96231b3b80d8
AsmPrinter owns the OutStreamer, so an owning pointer makes sense here. Using a
reference for this is crufty.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235752 91177308-0d34-0410-b5e6-96231b3b80d8
The target hooks should have already checked them. This change is
necessary to enable the remateriailzation on R600.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235673 91177308-0d34-0410-b5e6-96231b3b80d8
I couldn't provide a testcase as none of the public targets has wide
register classes with alot of subregisters and at the same time an
instruction which "ReMaterializable" and "AsCheapAsAMove" (could
probably be added for R600).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235668 91177308-0d34-0410-b5e6-96231b3b80d8
We were asserting on code like this:
extern "C" unsigned long _exception_code();
void might_crash(unsigned long);
void foo() {
__try {
might_crash(0);
} __except(1) {
might_crash(_exception_code());
}
}
Gtest and many other libraries get the exception code from the __except
block. What's supposed to happen here is that EAX is live into the
__except block, and it contains the exception code. Eventually we'll
represent that as a use of the landingpad ehptr value, but for now we
can replace it with undef.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235649 91177308-0d34-0410-b5e6-96231b3b80d8
remove copies that are useful after breaking some hardware dependencies.
In other words, handle this kind of situations conservatively by assuming reg2
is redefined by the undef flag.
reg1 = copy reg2
= inst reg2<undef>
reg2 = copy reg1
Copy propagation used to remove the last copy.
This is incorrect because the undef flag on reg2 in inst, allows next
passes to put whatever trashed value in reg2 that may help.
In practice we end up with this code:
reg1 = copy reg2
reg2 = 0
= inst reg2<undef>
reg2 = copy reg1
This fixes PR21743.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235647 91177308-0d34-0410-b5e6-96231b3b80d8
Third time's the charm. The previous commit was reverted as a
reverse for-loop in SelectionDAGBuilder::lowerWorkItem did 'I--'
on an iterator at the beginning of a vector, causing asserts
when using debugging iterators. This commit fixes that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235608 91177308-0d34-0410-b5e6-96231b3b80d8
Patch to remove extra bitcasts from shuffles, this is often a legacy of XformToShuffleWithZero being used to combine bitmaskings (of float vectors bitcast to integer vectors) into shuffles: bitcast(shuffle(bitcast(s0),bitcast(s1))) -> shuffle(s0,s1)
Differential Revision: http://reviews.llvm.org/D9097
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235578 91177308-0d34-0410-b5e6-96231b3b80d8
This is a re-commit of r235101, which also fixes the problems with the previous patch:
- Switches with only a default case and non-fallthrough were handled incorrectly
- The previous patch tickled a bug in PowerPC Early-Return Creation which is fixed here.
> This is a major rewrite of the SelectionDAG switch lowering. The previous code
> would lower switches as a binary tre, discovering clusters of cases
> suitable for lowering by jump tables or bit tests as it went along. To increase
> the likelihood of finding jump tables, the binary tree pivot was selected to
> maximize case density on both sides of the pivot.
>
> By not selecting the pivot in the middle, the binary trees would not always
> be balanced, leading to performance problems in the generated code.
>
> This patch rewrites the lowering to search for clusters of cases
> suitable for jump tables or bit tests first, and then builds the binary
> tree around those clusters. This way, the binary tree will always be balanced.
>
> This has the added benefit of decoupling the different aspects of the lowering:
> tree building and jump table or bit tests finding are now easier to tweak
> separately.
>
> For example, this will enable us to balance the tree based on profile info
> in the future.
>
> The algorithm for finding jump tables is quadratic, whereas the previous algorithm
> was O(n log n) for common cases, and quadratic only in the worst-case. This
> doesn't seem to be major problem in practice, e.g. compiling a file consisting
> of a 10k-case switch was only 30% slower, and such large switches should be rare
> in practice. Compiling e.g. gcc.c showed no compile-time difference. If this
> does turn out to be a problem, we could limit the search space of the algorithm.
>
> This commit also disables all optimizations during switch lowering in -O0.
>
> Differential Revision: http://reviews.llvm.org/D8649
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235560 91177308-0d34-0410-b5e6-96231b3b80d8
This removes the -sehprepare flag and makes __C_specific_handler
functions always to use WinEHPrepare.
This was tested by building all of chromium_builder_tests and running a
few tests that use SEH, but if something breaks, we can revert this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235557 91177308-0d34-0410-b5e6-96231b3b80d8
In particular, this handles SSA values that are live *out* of a handler.
The existing code only handles values that are live *in* to a handler.
It also handles phi nodes in the block where normal control should
resume after the end of a catch handler. When EH return points have phi
nodes, we need to split the return edge. It is impossible for phi
elimination to emit copies in the previous block if that block gets
outlined. The indirectbr that we leave in the function is only notional,
and is eliminated from the MachineFunction CFG early on.
Reviewers: majnemer, andrew.w.kaylor
Differential Revision: http://reviews.llvm.org/D9158
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235545 91177308-0d34-0410-b5e6-96231b3b80d8
This turned up after r235333, but was a pre-existing bug. The optimization
which transforms select(c, load, load) into a load of a select of the addresses
does not handle indexed loads (pre/post inc/dec). However, it did not check for
them either, leading to a crash if it tried to transform one of them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235497 91177308-0d34-0410-b5e6-96231b3b80d8
X86 backend.
The code generated for symbolic targets is identical to the code generated for
constant targets, except that a relocation is emitted to fix up the actual
target address at link-time. This allows IR and object files containing
patchpoints to be cached across JIT-invocations where the target address may
change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235483 91177308-0d34-0410-b5e6-96231b3b80d8
We should also teach the inliner to collapse framerecover of
frameaddress of the current frame down to an alloca, but that can happen
later.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235459 91177308-0d34-0410-b5e6-96231b3b80d8
Remove the `DIArray` and `DITypeArray` typedefs, preferring the
underlying types (`DebugNodeArray` and `MDTypeRefArray`, respectively).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235413 91177308-0d34-0410-b5e6-96231b3b80d8
Remove early returns for when `getVariable()` is null, and just assert
that it never happens. The Verifier already confirms that there's a
valid variable on these intrinsics, so we should assume the debug info
isn't broken. I also updated a check for a `!dbg` attachment, which the
Verifier similarly guarantees.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235400 91177308-0d34-0410-b5e6-96231b3b80d8
Keep the old SEH fan-in lowering on by default for now, since projects
rely on it. This will make it easy to test this change with a simple
flag flip.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235399 91177308-0d34-0410-b5e6-96231b3b80d8
Fixed issue with the combine of CONCAT_VECTOR of 2 BUILD_VECTOR nodes - the optimisation wasn't ensuring that the scalar operands of both nodes were the same type/size for implicit truncation.
Test case spotted by Patrik Hagglund
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235371 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This fixes http://llvm.org/bugs/show_bug.cgi?id=16439.
This is one possible way to approach this. The other would be to split InL>>(nbits-Amt) into (InL>>(nbits-1-Amt))>>1, which is also valid since since we only need to care about Amt up nbits-1. It's hard to tell which one is better since the shift might be expensive if this stage of expansion is not yet a legal machine integer, whereas comparisons with zero are relatively cheap at all sizes, but more expensive than a shift if the shift is on a legal machine type.
Patch by Keno Fischer!
Test Plan: regression test from http://reviews.llvm.org/D7752
Reviewers: chfast, resistor
Reviewed By: chfast, resistor
Subscribers: sanjoy, resistor, chfast, llvm-commits
Differential Revision: http://reviews.llvm.org/D4978
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235370 91177308-0d34-0410-b5e6-96231b3b80d8
Delete subclasses of (the already defunct) `DIScope`, updating users to
use the raw pointers from the `Metadata` hierarchy directly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235356 91177308-0d34-0410-b5e6-96231b3b80d8
Delete subclasses of (the already deleted) `DIType` in favour of
directly using pointers from the `Metadata` hierarchy.
While `DICompositeType` wraps `MDCompositeTypeBase` and `DIDerivedType`
wraps `MDDerivedTypeBase`, most uses of each really meant the more
specific `MDCompositeType` and `MDDerivedType`.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235351 91177308-0d34-0410-b5e6-96231b3b80d8
The version of `constructTypeDIE()` for `MDSubroutineType` is unrelated
to (and has different callers than) the `MDCompositeType`. Split the
two in half.
This simplifies an upcoming patch to delete `DICompositeType`. There
shouldn't be any real functionality change here. `createTypeDIE()` is
`cast<>`'ing where it didn't need to before, but that function in turn
is only called for true `MDCompositeType`s.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235349 91177308-0d34-0410-b5e6-96231b3b80d8
Update comment style in `DwarfUnit`.
- Drop duplicated comments at definition, and update the comments at
the declaration where the definition comments looked newer or more
complete.
- Drop the `functionName -` prefix.
- Add `\brief` in a few places.
- Remove a few comments entirely that weren't adding value (just
turned the function name and arguments into a sentence).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235345 91177308-0d34-0410-b5e6-96231b3b80d8
