It is impossible to create a hard link to a non existing file, so create a
dummy file, create the link an delete the dummy file.
On windows one cannot remove the current directory, so chdir first.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204719 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Remove the XFAIL added in my previous commit and correct the test such that
it correctly tests the expansion of the assembler temporary.
Also added a test to check that $at is always $1 when written by the
user.
Corrected the new assembler temporary warnings so that they are emitted for
numeric registers too.
Differential Revision: http://llvm-reviews.chandlerc.com/D3169
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204711 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The assembler temporary is normally $at ($1) but can be reassigned using
'.set at=$reg'. Regardless of which register is nominated as the assembler
temporary, $at remains $1 when written by the user.
Adds warnings under the following conditions:
* The register nominated as the assembler temporary is used by the user.
* '.set noat' is in effect and $at is used by the user.
Both of these only work for named registers. I have a follow up commit that makes it work for numeric registers as well.
XFAIL set-at-directive.s since it incorrectly tests that $at is redefined by
'.set at=$reg'. Testcases will follow in a separate commit.
Patch by David Chisnall
His work was sponsored by: DARPA, AFRL
Differential Revision: http://llvm-reviews.chandlerc.com/D3167
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204710 91177308-0d34-0410-b5e6-96231b3b80d8
This is a pretty straight forward translation for COFF, we just need to
stick the data in a COMDAT section marked as
IMAGE_COMDAT_SELECT_NODUPLICATES.
N.B. We must be careful to avoid sticking entities with private linkage
in COMDAT groups. COFF is pretty hostile to the renaming of entities so
we must be careful to disallow GlobalVariables with unstable names.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204703 91177308-0d34-0410-b5e6-96231b3b80d8
Extracts coming from phis were being hoisted, while all others were
sunk to their uses. This was inconsistent and didn't seem to serve a
purpose. Changing all extracts to be sunk to uses is a prerequisite
for adding block frequency to the SLP vectorizer's cost model.
I benchmarked the change in isolation (without block frequency). I
only saw noise on x86 and some potentially significant improvements on
ARM. No major regressions is good enough for me.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204699 91177308-0d34-0410-b5e6-96231b3b80d8
Implement debug_loc.dwo, as well as llvm-dwarfdump support for dumping
this section.
Outlined in the DWARF5 spec and http://gcc.gnu.org/wiki/DebugFission the
debug_loc.dwo section has more variation than the standard debug_loc,
allowing 3 different forms of entry (plus the end of list entry). GCC
seems to, and Clang certainly, only use one form, so I've just
implemented dumping support for that for now.
It wasn't immediately obvious that there was a good refactoring to share
the implementation of dumping support between debug_loc and
debug_loc.dwo, so they're separate for now - ideas welcome or I may come
back to it at some point.
As per a comment in the code, we could choose different forms that may
reduce the number of debug_addr entries we emit, but that will require
further study.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204697 91177308-0d34-0410-b5e6-96231b3b80d8
This seems excessive - switching section isn't expensive (or if it is
we're already being wasteful, since we emitted the debug_loc section
symbol earlier anyway) and otherwise there's no work that happens in
this function when the list is empty.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204696 91177308-0d34-0410-b5e6-96231b3b80d8
This adds a function to Endian.h that reads from and updates a pointer
into a buffer with endian specific data. This is more convenient for
stream-like reading of data than endian::read.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204693 91177308-0d34-0410-b5e6-96231b3b80d8
When register allocator's stage is RS_Spill, we choose spill over using the CSR
for the first time, if the spill cost is lower than CSRCost.
When register allocator's stage is < RS_Split, we choose pre-splitting over
using the CSR for the first time, if the cost of splitting is lower than
CSRCost.
CSRCost is set with command-line option "regalloc-csr-first-time-cost". The
default value is 0 to generate the same codes as before this commit.
With a value of 15 (1 << 14 is the entry frequency), I measured performance
gain of 3% on 253.perlbmk and 1.7% on 197.parser, with instrumented PGO,
on an arm device.
rdar://16162005
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204690 91177308-0d34-0410-b5e6-96231b3b80d8
Factor out two functions calculateRegionSplitCost and doRegionSplit
from tryRegionSplit. These two functions will be used in coming patches.
rdar://16162005
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204684 91177308-0d34-0410-b5e6-96231b3b80d8
Rather than using a flat list with "empty" entries (ala the actual
on-disk format), keep separate lists for each variable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204680 91177308-0d34-0410-b5e6-96231b3b80d8
No functional change intended.
Merging up-front rather than delaying this task until later. This just
seems simpler and more efficient (avoiding growing the debug loc list
only to have to skip over those post-merged entries, etc).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204679 91177308-0d34-0410-b5e6-96231b3b80d8
This is used to avoid relocations in the dwo file by allowing
DW_AT_ranges specified in debug_info.dwo to be relative to this base
address. (r204667 implements the base-relative DW_AT_ranges side of
this)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204672 91177308-0d34-0410-b5e6-96231b3b80d8
This removes the debug_ranges relocations from debug_info.dwo (but
doesn't implement the DW_AT_GNU_ranges_base which is also necessary for
correct functioning)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204668 91177308-0d34-0410-b5e6-96231b3b80d8
Try to match scalar and first like the other instructions.
Expand 64-bit ands to a pair of 32-bit ands since that is not
available on the VALU.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204660 91177308-0d34-0410-b5e6-96231b3b80d8
never returns, which is true by design.
Initially assumed that the reason is llvm_unreachable being dependent on NDEBUG.
However, even if llvm_unreachable is replaced by __assume(false), VC still warns in
Release modes but not in Debug modes...
The real reason turned out to be optimization flags.
With /Od in Debug modes the warning is not issued whereas with /O1 it is.
I could not find any documentation to this effect, but it is reproducable:
Try compiling http://msdn.microsoft.com/en-us/library/khwfyc5d(v=vs.90).aspx
with /O1 and then with /Od.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204659 91177308-0d34-0410-b5e6-96231b3b80d8
As a first step towards real little-endian code generation, this patch
changes the PowerPC MC layer to actually generate little-endian object
files. This involves passing the little-endian flag through the various
layers, including down to createELFObjectWriter so we actually get basic
little-endian ELF objects, emitting instructions in little-endian order,
and handling fixups and relocations as appropriate for little-endian.
The bulk of the patch is to update most test cases in test/MC/PowerPC
to verify both big- and little-endian encodings. (The only test cases
*not* updated are those that create actual big-endian ABI code, like
the TLS tests.)
Note that while the object files are now little-endian, the generated
code itself is not yet updated, in particular, it still does not adhere
to the ELFv2 ABI.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204634 91177308-0d34-0410-b5e6-96231b3b80d8
Those patterns are used when the load cannot be folded into the related broadcast
during the select phase.
This happens when the load gets additional uses that were not anticipated during
the previous lowering phases (constant vector to constant load, then constant
load reused) or when selection DAG is not able to prove that folding the load
will not create a cycle in the DAG.
<rdar://problem/16074331>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204631 91177308-0d34-0410-b5e6-96231b3b80d8
Previously we would print an error message on machines where the only VS
version we find is 2013, even though we successfully install the integration
files for it.
Also, we shouldn't have two END labels.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204629 91177308-0d34-0410-b5e6-96231b3b80d8
This can be observed with the old testcase of CodeGen/X86/pr12312.ll:
47c47
< vorps %ymm0, %ymm1, %ymm0
---
> vorps %ymm1, %ymm0, %ymm0
97c97
< vorps %ymm1, %ymm0, %ymm0
---
> vorps %ymm0, %ymm1, %ymm0
The vector VecIns is populated with all the values from VecInMap. This is done
while iterating VecInMap. VecInMap uses a hash of pointer values so the
resulting order can vary depending on the memory layout.
The fix is to populate the vector VecIns earlier as VecInMap is populated.
This is done in DAG traversal order.
Fixes <rdar://problem/16398806>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204623 91177308-0d34-0410-b5e6-96231b3b80d8
And vice-versa, as long as the types are the same width.
There are a few R600 tests that will cover this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204616 91177308-0d34-0410-b5e6-96231b3b80d8
