Summary:
Because llvm-dsymutil is using ASMPrinter without any MachineFunction
of Module available.
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: yaron.keren, rafael, llvm-commits
Differential Revision: http://reviews.llvm.org/D11078
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242384 91177308-0d34-0410-b5e6-96231b3b80d8
The jump table info is serialized using a YAML mapping that contains its kind
and a YAML sequence of jump table entries. A jump table entry is a YAML mapping
that has an ID and an inline YAML sequence of machine basic block references.
The testcase 'CodeGen/MIR/X86/jump-table-info.mir' doesn't have any instructions
because one of them contains a jump table index operand. The jump table index
operands will be serialized in a follow up patch, and the appropriate
instructions will be added to this testcase.
Reviewers: Duncan P. N. Exon Smith
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242357 91177308-0d34-0410-b5e6-96231b3b80d8
This commit serializes the references to the named LLVM alloca instructions from
the stack objects in the machine frame info. This commit adds a field 'Name' to
the struct 'yaml::MachineStackObject'. This new field is used to store the name
of the alloca instruction when the alloca is present and when it has a name.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242339 91177308-0d34-0410-b5e6-96231b3b80d8
MachineCombiner predicated its use of scheduling-based metrics on
hasInstrSchedModel(), but useful conclusions can be drawn from pipeline
itineraries as well. Almost all of the logic (except for resource tracking in
preservesResourceLen) can be used if we have an itinerary, so enable it in that
case as well.
This will be used by the PowerPC backend in an upcoming commit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242277 91177308-0d34-0410-b5e6-96231b3b80d8
SelectionDAG already had begin/end methods for iterating over all
the nodes, but didn't define an iterator_range for us in foreach
loops.
This adds such a method and uses it in some of the eligible places
throughout the backends.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242212 91177308-0d34-0410-b5e6-96231b3b80d8
There was a 32-bit padding gap between 'unsigned short NumOperands, NumValues;' and 'DebugLoc debugLoc. Move 'unsigned IROrder' in to that gap.
This trims the size of SDNode's from 76 bytes (really 80 due to alignment) to 72 bytes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242211 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Before this change, personality directives were not emitted
if there was no invoke left in the function (of course until
recently this also meant that we couldn't know what
the personality actually was). This patch forces personality directives
to still be emitted, unless it is known to be a noop in the absence of
invokes, or the user explicitly specified `nounwind` (and not
`uwtable`) on the function.
Reviewers: majnemer, rnk
Subscribers: rnk, llvm-commits
Differential Revision: http://reviews.llvm.org/D10884
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242185 91177308-0d34-0410-b5e6-96231b3b80d8
We have a detailed def/use lists for every physical register in
MachineRegisterInfo anyway, so there is little use in maintaining an
additional bitset of which ones are used.
Removing it frees us from extra book keeping. This simplifies
VirtRegMap.
Differential Revision: http://reviews.llvm.org/D10911
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242173 91177308-0d34-0410-b5e6-96231b3b80d8
Do not use MachineRegisterInfo::setPhysRegUsed()/isPhysRegUsed()
anymore. This bitset changes function-global state and is set by the
VirtRegRewriter anyway.
Simply use a bitvector private to RAGreedy.
Differential Revision: http://reviews.llvm.org/D10910
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242169 91177308-0d34-0410-b5e6-96231b3b80d8
This changes TargetFrameLowering::processFunctionBeforeCalleeSavedScan():
- Rename the function to determineCalleeSaves()
- Pass a bitset of callee saved registers by reference, thus avoiding
the function-global PhysRegUsed bitset in MachineRegisterInfo.
- Without PhysRegUsed the implementation is fine tuned to not save
physcial registers which are only read but never modified.
Related to rdar://21539507
Differential Revision: http://reviews.llvm.org/D10909
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242165 91177308-0d34-0410-b5e6-96231b3b80d8
This commit serializes the fixed stack objects, including fixed spill slots.
The fixed stack objects are serialized using a YAML sequence of YAML inline
mappings. Each mapping has the object's ID, type, size, offset, and alignment.
The objects that aren't spill slots also serialize the isImmutable and isAliased
flags.
The fixed stack objects are a part of the machine function's YAML mapping.
Reviewers: Duncan P. N. Exon Smith
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242045 91177308-0d34-0410-b5e6-96231b3b80d8
This is a C++11 feature that both GCC and MSVC have supported as ane extension
long before C++11 was approved.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242042 91177308-0d34-0410-b5e6-96231b3b80d8
In this patch I have only encoding. Intrinsics and DAG lowering will be in the next patch.
I temporary removed the old intrinsics test (just to split this patch).
Half types are not covered here.
Differential Revision: http://reviews.llvm.org/D11134
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242023 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Following the discussion on r241884, it's more reasonable to assume that a
target has no vector registers by default instead of letting every such
target overrides getNumberOfRegisters.
Therefore, this patch modifies BasicTTIImpl::getNumberOfRegisters to
return 0 when Vector is true, and partially reverts r241884 which
modifies NVPTXTTIImpl::getNumberOfRegisters.
It also fixes a performance bug in LoopVectorizer. Even if a target has
no vector registers, vectorization may still help ILP. So, we need both
checks to be false before disabling loop vectorization all together.
Reviewers: hfinkel
Subscribers: llvm-commits, jholewinski
Differential Revision: http://reviews.llvm.org/D11108
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241942 91177308-0d34-0410-b5e6-96231b3b80d8
This commit implements the initial serialization of stack objects from the
MachineFrameInfo class. It can only serialize the ordinary stack objects
(including ordinary spill slots), but it doesn't serialize variable sized or
fixed stack objects yet.
The stack objects are serialized using a YAML sequence of YAML inline mappings.
Each mapping has the object's ID, type, size, offset and alignment. The stack
objects are a part of machine function's YAML mapping.
Reviewers: Duncan P. N. Exon Smith
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241922 91177308-0d34-0410-b5e6-96231b3b80d8
The virtual registers are serialized using a YAML sequence of YAML inline
mappings. Each mapping has the id of the virtual register and the register
class.
Reviewers: Duncan P. N. Exon Smith
Differential Revision: http://reviews.llvm.org/D10981
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241868 91177308-0d34-0410-b5e6-96231b3b80d8
This commit serializes the 13 scalar boolean and integer attributes from the
MachineFrameInfo class: IsFrameAddressTaken, IsReturnAddressTaken, HasStackMap,
HasPatchPoint, StackSize, OffsetAdjustment, MaxAlignment, AdjustsStack,
HasCalls, MaxCallFrameSize, HasOpaqueSPAdjustment, HasVAStart, and
HasMustTailInVarArgFunc. These attributes are serialized as part
of the frameInfo YAML mapping, which itself is a part of the machine function's
YAML mapping.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241844 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: jholewinski, llvm-commits, rafael, yaron.keren
Differential Revision: http://reviews.llvm.org/D11040
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241778 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: jholewinski, ted, yaron.keren, rafael, llvm-commits
Differential Revision: http://reviews.llvm.org/D11028
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241775 91177308-0d34-0410-b5e6-96231b3b80d8
DataLayout is no longer optional. It was initialized with or without
a DataLayout, and the DataLayout when supplied could have been the
one from the TargetMachine.
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: jholewinski, llvm-commits, rafael, yaron.keren
Differential Revision: http://reviews.llvm.org/D11021
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241774 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Avoid using the TargetMachine owned DataLayout and use the Module owned
one instead. This requires passing the DataLayout up the stack to
ComputeValueVTs().
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: jholewinski, yaron.keren, rafael, llvm-commits
Differential Revision: http://reviews.llvm.org/D11019
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241773 91177308-0d34-0410-b5e6-96231b3b80d8
This commit changes the type of the field 'Name' in the struct
'yaml::MachineBasicBlock' from 'std::string' to 'yaml::StringValue'. This change
allows the MIR parser to report errors related to the MBB name with the proper
source locations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241718 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: yaron.keren, rafael, llvm-commits
Differential Revision: http://reviews.llvm.org/D11009
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241654 91177308-0d34-0410-b5e6-96231b3b80d8
The incoming EBP value points to the end of a local stack allocation, so
we can use that to restore ESI, the base pointer. Once we do that, we
can use local stack allocations. If we know we need stack realignment,
spill the original frame pointer in the prologue and reload it after
restoring ESI.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241648 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Initially, these intrinsics seemed like part of a family of "frame"
related intrinsics, but now I think that's more confusing than helpful.
Initially, the LangRef specified that this would create a new kind of
allocation that would be allocated at a fixed offset from the frame
pointer (EBP/RBP). We ended up dropping that design, and leaving the
stack frame layout alone.
These intrinsics are really about sharing local stack allocations, not
frame pointers. I intend to go further and add an `llvm.localaddress()`
intrinsic that returns whatever register (EBP, ESI, ESP, RBX) is being
used to address locals, which should not be confused with the frame
pointer.
Naming suggestions at this point are welcome, I'm happy to re-run sed.
Reviewers: majnemer, nicholas
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11011
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241633 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
SelectionDAG itself is not invoking directly the DataLayout in the
TargetMachine, but the "TargetLowering" class is still using it. I'll
address it in a following commit.
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11000
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241618 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This change is part of a series of commits dedicated to have a
single DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10984
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241610 91177308-0d34-0410-b5e6-96231b3b80d8
This commit adds a 'run-pass' option to llc, which instructs the compiler to run
one specific code generation pass only.
Llc already has the 'start-after' and the 'stop-after' options, and this new
option complements the other two by making it easier to write tests that want
to invoke a single pass only.
Reviewers: Duncan P. N. Exon Smith
Differential Revision: http://reviews.llvm.org/D10776
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241476 91177308-0d34-0410-b5e6-96231b3b80d8
This commit changes normal isel and fast isel to read the user-defined trap
function name from function attribute "trap-func-name" attached to llvm.trap or
llvm.debugtrap instead of from TargetOptions::TrapFuncName. This is needed to
use clang's command line option "-ftrap-function" for LTO and enable changing
the trap function name on a per-call-site basis.
Out-of-tree projects currently using TargetOptions::TrapFuncName to specify the
trap function name should attach attribute "trap-func-name" to the call sites
of llvm.trap and llvm.debugtrap instead.
rdar://problem/21225723
Differential Revision: http://reviews.llvm.org/D10832
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241305 91177308-0d34-0410-b5e6-96231b3b80d8
This commit implements serialization of the machine basic block successors. It
uses a YAML flow sequence that contains strings that have the MBB references.
The MBB references in those strings use the same syntax as the MBB machine
operands in the machine instruction strings.
Reviewers: Duncan P. N. Exon Smith
Differential Revision: http://reviews.llvm.org/D10699
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241093 91177308-0d34-0410-b5e6-96231b3b80d8
This change unifies how LTOModule and the backend obtain linker flags
for globals: via a new TargetLoweringObjectFile member function named
emitLinkerFlagsForGlobal. A new function LTOModule::getLinkerOpts() returns
the list of linker flags as a single concatenated string.
This change affects the C libLTO API: the function lto_module_get_*deplibs now
exposes an empty list, and lto_module_get_*linkeropts exposes a single element
which combines the contents of all observed flags. libLTO should never have
tried to parse the linker flags; it is the linker's job to do so. Because
linkers will need to be able to parse flags in regular object files, it
makes little sense for libLTO to have a redundant mechanism for doing so.
The new API is compatible with the old one. It is valid for a user to specify
multiple linker flags in a single pragma directive like this:
#pragma comment(linker, "/defaultlib:foo /defaultlib:bar")
The previous implementation would not have exposed
either flag via lto_module_get_*deplibs (as the test in
TargetLoweringObjectFileCOFF::getDepLibFromLinkerOpt was case sensitive)
and would have exposed "/defaultlib:foo /defaultlib:bar" as a single flag via
lto_module_get_*linkeropts. This may have been a bug in the implementation,
but it does give us a chance to fix the interface.
Differential Revision: http://reviews.llvm.org/D10548
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241010 91177308-0d34-0410-b5e6-96231b3b80d8
There are two main reasons why a linked-list makes sense for
`DIEValueList`.
1. We want `DIE` to be on a `BumpPtrAllocator` to improve teardown
efficiency. Making `DIEValueList` array-based would make that much
more complicated.
2. The singly-linked list is fairly memory efficient. The histogram
[1] shows that most DIEs have relatively few values, so we often pay
less than the 2/3-pointer static overhead of a vector. Furthermore,
we don't know ahead of time exactly how many values a `DIE` needs,
so a vector-like scheme will on average over-allocate by ~50%. As
it happens, that's the same memory overhead as the linked list node.
[1]: http://lists.cs.uiuc.edu/pipermail/llvmdev/2015-May/085910.html
The comment I added to the code is a little more succinct, but I think
it's enough to give the idea.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240868 91177308-0d34-0410-b5e6-96231b3b80d8
Push `ModuleSlotTracker` through `MachineOperand`s, dropping the time
for `llc -print-machineinstrs` on the testcase in PR23865 from ~13
seconds to ~9 seconds. Now `SlotTracker::processFunctionMetadata()`
accounts for only 8% of the runtime, which seems reasonable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240845 91177308-0d34-0410-b5e6-96231b3b80d8
Expose enough of the IR-level `SlotTracker` so that
`MachineFunction::print()` can use a single one for printing
`BasicBlock`s. Next step would be to lift this through a few more APIs
so that we can make other print methods faster.
Fixes PR23865, changing the runtime of `llc -print-machineinstrs` from
many minutes (killed after 3 minutes, but it wasn't very close) to
13 seconds for a 502185 line dump.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240842 91177308-0d34-0410-b5e6-96231b3b80d8
SDNode already had ops() which would iterate over the operands and return
SDUse*. This version instead gets the SDValue's out of the SDUse's so that
we can use foreach in more places.
Reviewed by David Blaikie.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240805 91177308-0d34-0410-b5e6-96231b3b80d8
This commit serializes machine basic block operands. The
machine basic block operands use the following syntax:
%bb.<id>[.<name>]
This commit also modifies the YAML representation for the
machine basic blocks - a new, required field 'id' is added
to the MBB YAML mapping.
The id is used to resolve the MBB references to the
actual MBBs. And while the name of the MBB can be
included in a MBB reference, this name isn't used to
resolve MBB references - as it's possible that multiple
MBBs will reference the same BB and thus they will have the
same name. If the name is specified, the parser will verify
that it is equal to the name of the MBB with the specified id.
Reviewers: Duncan P. N. Exon Smith
Differential Revision: http://reviews.llvm.org/D10608
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240792 91177308-0d34-0410-b5e6-96231b3b80d8
E.g. An interleaved load (Factor = 2):
%wide.vec = load <8 x i32>, <8 x i32>* %ptr
%v0 = shuffle <8 x i32> %wide.vec, <8 x i32> undef, <0, 2, 4, 6>
%v1 = shuffle <8 x i32> %wide.vec, <8 x i32> undef, <1, 3, 5, 7>
It can be transformed into a ld2 intrinsic in AArch64 backend or a vld2 intrinsic in ARM backend.
E.g. An interleaved store (Factor = 3):
%i.vec = shuffle <8 x i32> %v0, <8 x i32> %v1, <0, 4, 8, 1, 5, 9, 2, 6, 10, 3, 7, 11>
store <12 x i32> %i.vec, <12 x i32>* %ptr
It can be transformed into a st3 intrinsic in AArch64 backend or a vst3 intrinsic in ARM backend.
Differential Revision: http://reviews.llvm.org/D10533
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240751 91177308-0d34-0410-b5e6-96231b3b80d8
Replace the `std::vector<>` for `DIE::Children` with an intrusively
linked list. This is a strict memory improvement: it requires no
auxiliary storage, and reduces `sizeof(DIE)` by one pointer. It also
factors out the DIE-related malloc traffic.
This drops llc memory usage from 735 MB down to 718 MB, or ~2.3%.
(I'm looking at `llc` memory usage on `verify-uselistorder.lto.opt.bc`;
see r236629 for details.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240736 91177308-0d34-0410-b5e6-96231b3b80d8
