Don't use `DebugLoc` accessors if we're pointing at null, which will be
a problem after a WIP patch to make the `DIDescriptor` accessors more
strict. Caught by Frontend/profile-sample-use-loc-tracking.c (in
clang).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232792 91177308-0d34-0410-b5e6-96231b3b80d8
Remove the separate `DebugInfoVerifier` class, as a partial step toward
better integrating debug info verification with the `Verifier`.
Right now, verification of debug info is kind of a mess.
- There are `DIDescriptor::Verify()` checks live in `DebugInfo.cpp`.
These return `bool`, and there's no way to see (except by opening a
debugger) why they fail.
- We rely on `DebugInfoFinder` to traverse the debug info graph and
dig up nodes. However, the regular `Verifier` visits many of these
nodes when it calls into debug info intrinsic operands. Visiting
twice and running different checks is kind of absurd.
- Moreover, `DebugInfoFinder` asserts on failed type resolution -- the
verifier should never assert!
By integrating the two verifiers, I'm aiming at solving these problems
(work to be done, obviously). Verification can be localized to the
`Verifier`; we can use a naive `MDNode` operand traversal to find all
the nodes; we can verify type references instead of asserting on
failure.
There are `assert()`s sprinkled throughout the optimizer and dwarf
backend on `DIDescriptor::Verify()` checks. This is a hangover from
when the debug info verifier was off, so I plan to remove them as I go
(once I confirm that the checks are done at verification time).
Note: to keep the behaviour of only running the debug info verifier when
-verify succeeds, I've added an `EverBroken` flag. Once the
`DebugInfoFinder` assertions are gone and the two traversals have been
merged, I expect to be able to remove this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232790 91177308-0d34-0410-b5e6-96231b3b80d8
It was previously repeatedly erasing elements from the middle of a vector,
causing O(n^2) worst-case run-time.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232789 91177308-0d34-0410-b5e6-96231b3b80d8
This is very related to the bug fixed in r174431. The problem is that
SelectionDAG does not include alignment in the uniquing of loads and
stores. When an otherwise no-op DAGCombine would increase the alignment
of a load or store, the original node would be returned (with the
alignment increased), which would cause the node not to be processed by
any further DAGCombines.
I don't have a direct testcase for this that manifests on an in-tree
target, but I did see some noise in the tests for other targets and have
updated them for it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232780 91177308-0d34-0410-b5e6-96231b3b80d8
This enables us to remove calls to the subtarget from the TargetMachine
and with a small hack for backends that require global subtarget
information for module level code generation, e.g. mips abi flags, as
mentioned in a fixme in the code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232776 91177308-0d34-0410-b5e6-96231b3b80d8
This switches the sense of the i32 values and updates the test cases.
We can also use CHECK-SAME to clean up some tests, and reduce the visual
noise from bitcasts.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232774 91177308-0d34-0410-b5e6-96231b3b80d8
Another case of x86-specific shuffle strength reduction:
avoid generating insert*128 instructions with index 0 because
they are slower than their non-lane-changing blend equivalents.
Shuffle lowering already catches most of these cases, but
the zero vector case and some other paths such as in the
modified test in vector-shuffle-256-v32.ll were getting
through.
Differential Revision: http://reviews.llvm.org/D8366
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232773 91177308-0d34-0410-b5e6-96231b3b80d8
Remove `DebugInfoVerifierLegacyPass` and the `-verify-di` pass.
Instead, call into the `DebugInfoVerifier` from inside
`VerifierLegacyPass::finalizeModule()`. This better matches the logic
in `verifyModule()` (used by the new PassManager), avoids requiring two
separate passes to verify the IR, and makes the API for "add a pass to
verify the IR" simple.
Note: the `-verify-debug-info` flag still works (for now, at least;
eventually it might make sense to just remove it).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232772 91177308-0d34-0410-b5e6-96231b3b80d8
Each use of the byte array uses a different alias. This makes the
backend less likely to reuse previously computed byte array addresses,
improving the security of the CFI mechanism based on this pass.
Differential Revision: http://reviews.llvm.org/D8455
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232770 91177308-0d34-0410-b5e6-96231b3b80d8
`StripDebug` was only used by tools/opt/opt.cpp in
`AddStandardLinkPasses()`, but opt.cpp adds the same pass based on its
command-line flag before it calls `AddStandardLinkPasses()`. Stripping
debug info twice isn't very useful.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232765 91177308-0d34-0410-b5e6-96231b3b80d8
When we encounter a global with a comdat, rather than iterating over
every global in the module to find globals in the same comdat, store the
members in a multimap. This effectively lowers the complexity to O(N log N),
improving performance significantly for large modules such as might be
encountered during LTO.
It looks like we used to do something like this until r219191.
No functional change.
Differential Revision: http://reviews.llvm.org/D8431
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232743 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
CUDA 7.0's libdevice uses slightly different IR to call __nvvm_reflect
and that triggers an assertion in nvvm_reflect optimization pass. This
change allows nvvm_reflect pass to deal with both old and new ways to
pass an argument to __nvvm_reflect.
Test Plan: ninja check-all
Reviewers: eliben, echristo
Subscribers: jholewinski, llvm-commits
Differential Revision: http://reviews.llvm.org/D8399
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232732 91177308-0d34-0410-b5e6-96231b3b80d8
There are two main advantages to doing this
* Targets that only need to handle one of the formats specially don't have
to worry about the others. For example, x86 now only registers a
constructor for the COFF streamer.
* Changes to the arguments passed to one format constructor will not impact
the other formats.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232699 91177308-0d34-0410-b5e6-96231b3b80d8
From what I can tell, the code is checking for PHIs that expect any value from
this block, not just constants.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232697 91177308-0d34-0410-b5e6-96231b3b80d8
Some subregisters are only to indicate different access sizes, while not
providing any way to actually divide the register up into multiple
disjunct parts. Avoid tracking subregister liveness in these cases as it
is not beneficial.
Differential Revision: http://reviews.llvm.org/D8429
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232695 91177308-0d34-0410-b5e6-96231b3b80d8
This should bring the windows bots back.
It is a bit ugly, but it is better than what we had before: The triple would
say that the object format was COFF, but llc/llvm-mc would produce an ELF.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232683 91177308-0d34-0410-b5e6-96231b3b80d8
as we don't necessarily need to do this yet - though we could move
the base class to the TargetMachine as it isn't subtarget dependent.
This reverts commit r232103.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232665 91177308-0d34-0410-b5e6-96231b3b80d8
Currently v2i64 vectors shifts (non-equal shift amounts) are scalarized, costing 4 x extract, 2 x x86-shifts and 2 x insert instructions - and it gets even more awkward on 32-bit targets.
This patch separately shifts the vector by both shift amounts and then shuffles the partial results back together, costing 2 x shuffles and 2 x sse-shifts instructions (+ 2 movs on pre-AVX hardware).
Note - this patch only improves the SHL / LSHR logical shifts as only these are supported in SSE hardware.
Differential Revision: http://reviews.llvm.org/D8416
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232660 91177308-0d34-0410-b5e6-96231b3b80d8
