instructions in the assembly code variant if one exists.
The intended use for this is so tools like lldb and darwin's otool(1)
can be switched to print Intel-flavored disassembly.
I discussed extensively this API with Jim Grosbach and we feel
while it may not be fully general, in reality there is only one syntax
for each assembly with the exception of X86 which has exactly
two for historical reasons.
rdar://10989182
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170477 91177308-0d34-0410-b5e6-96231b3b80d8
The bundle flags are now maintained by the slightly higher-level
functions bundleWithPred() / bundleWithSucc() which enforce consistent
bundle flags between neighboring instructions.
See also MIBundleBuilder for an even higher-level approach to building
bundles.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170475 91177308-0d34-0410-b5e6-96231b3b80d8
The bundle_iterator::operator++ function now doesn't need to dig out the
basic block and check against end(). It can use the isBundledWithSucc()
flag to find the last bundled instruction safely.
Similarly, MachineInstr::isBundled() no longer needs to look at
iterators etc. It only has to look at flags.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170473 91177308-0d34-0410-b5e6-96231b3b80d8
The bundle-related MI flags need to be kept in sync with the neighboring
instructions. Don't allow the bulk flag-setting setFlags() function to
change them.
Also don't copy MI flags when cloning an instruction. The clone's bundle
flags will be set when it is explicitly inserted into a bundle.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170459 91177308-0d34-0410-b5e6-96231b3b80d8
Remove the instr_iterator versions of the splice() functions. It doesn't
seem useful to be able to splice sequences of instructions that don't
consist of full bundles.
The normal splice functions that take MBB::iterator arguments are not
changed, and they can move whole bundles around without any problems.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170456 91177308-0d34-0410-b5e6-96231b3b80d8
The single-element ilist::splice() function supports a noop move:
List.splice(I, List, I);
The corresponding std::list function doesn't allow that, so add a unit
test to document that behavior.
This also means that
List.splice(I, List, F);
is somewhat surprisingly not equivalent to
List.splice(I, List, F, next(F));
This patch adds an assertion to catch the illegal case I == F above.
Alternatively, we could make I == F a legal noop, but that would make
ilist differ even more from std::list.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170443 91177308-0d34-0410-b5e6-96231b3b80d8
The normal insert() function takes an MBB::iterator position, and
inserts a stand-alone MachineInstr as before.
The insert() function that takes an MBB::instr_iterator position can
insert instructions inside a bundle, and will now update the bundle
flags correctly when that happens.
When the insert position is between two bundles, it is unclear whether
the instruction should be appended to the previous bundle, prepended to
the next bundle, or stand on its own. The MBB::insert() function doesn't
bundle the instruction in that case, use the MIBundleBuilder class for
that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170437 91177308-0d34-0410-b5e6-96231b3b80d8
Most code is oblivious to bundles and uses the MBB::iterator which only
visits whole bundles. MBB::erase() operates on whole bundles at a time
as before.
MBB::remove() now refuses to remove bundled instructions. It is not safe
to remove all instructions in a bundle without deleting them since there
is no way of returning pointers to all the removed instructions.
MBB::remove_instr() and MBB::erase_instr() will now update bundle flags
correctly, lifting individual instructions out of bundles while leaving
the remaining bundle intact.
The MachineInstr convenience functions are updated so
eraseFromParent() erases a whole bundle as before
eraseFromBundle() erases a single instruction, leaving the rest of its bundle.
removeFromParent() refuses to operate on bundled instructions, and
removeFromBundle() lifts a single instruction out of its bundle.
These functions will no longer accidentally split or coalesce bundles -
bundle flags are updated to preserve the existing bundling, and explicit
bundleWith* / unbundleFrom* functions should be used to change the
instruction bundling.
This API update is still a work in progress. I am going to update APIs
first so they maintain bundle flags automatically when possible. Then
I'll add stricter verification of the bundle flags.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170384 91177308-0d34-0410-b5e6-96231b3b80d8
compilation directory.
This defaults to the current working directory, just as it always has,
but now an assembler can choose to override it with a custom directory.
I've taught llvm-mc about this option and added a test case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170371 91177308-0d34-0410-b5e6-96231b3b80d8
Mips16 is really a processor decoding mode (ala thumb 1) and in the same
program, mips16 and mips32 functions can exist and can call each other.
If a jal type instruction encounters an address with the lower bit set, then
the processor switches to mips16 mode (if it is not already in it). If the
lower bit is not set, then it switches to mips32 mode.
The linker knows which functions are mips16 and which are mips32.
When relocation is performed on code labels, this lower order bit is
set if the code label is a mips16 code label.
In general this works just fine, however when creating exception handling
tables and dwarf, there are cases where you don't want this lower order
bit added in.
This has been traditionally distinguished in gas assembly source by using a
different syntax for the label.
lab1: ; this will cause the lower order bit to be added
lab2=. ; this will not cause the lower order bit to be added
In some cases, it does not matter because in dwarf and debug tables
the difference of two labels is used and in that case the lower order
bits subtract each other out.
To fix this, I have added to mcstreamer the notion of a debuglabel.
The default is for label and debug label to be the same. So calling
EmitLabel and EmitDebugLabel produce the same result.
For various reasons, there is only one set of labels that needs to be
modified for the mips exceptions to work. These are the "$eh_func_beginXXX"
labels.
Mips overrides the debug label suffix from ":" to "=." .
This initial patch fixes exceptions. More changes most likely
will be needed to DwarfCFException to make all of this work
for actual debugging. These changes will be to emit debug labels in some
places where a simple label is emitted now.
Some historical discussion on this from gcc can be found at:
http://gcc.gnu.org/ml/gcc-patches/2008-08/msg00623.htmlhttp://gcc.gnu.org/ml/gcc-patches/2008-11/msg01273.html
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170279 91177308-0d34-0410-b5e6-96231b3b80d8
for a wider range of GOT entries that can hold thread-relative offsets.
This matches the behavior of GCC, which was not documented in the PPC64 TLS
ABI. The ABI will be updated with the new code sequence.
Former sequence:
ld 9,x@got@tprel(2)
add 9,9,x@tls
New sequence:
addis 9,2,x@got@tprel@ha
ld 9,x@got@tprel@l(9)
add 9,9,x@tls
Note that a linker optimization exists to transform the new sequence into
the shorter sequence when appropriate, by replacing the addis with a nop
and modifying the base register and relocation type of the ld.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170209 91177308-0d34-0410-b5e6-96231b3b80d8
Accordingly, add helper funtions getSimpleValueType (in parallel to
getValueType) in SDValue, SDNode, and TargetLowering.
This is the first, in a series of patches.
This is the second attempt. In the first attempt (r169837), a few
getSimpleVT() were hoisted too far, detected by bootstrap failures.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170104 91177308-0d34-0410-b5e6-96231b3b80d8
On MachO, sections also have segment names. When a tool looking at a .o file
prints a segment name, this is what they mean. In reality, a .o has only one,
anonymous, segment.
This patch adds a MachO only function to fetch that segment name. I named it
getSectionFinalSegmentName since the main use for the name seems to be informing
the linker with segment this section should go to.
The patch also changes MachOObjectFile::getSectionName to return just the
section name instead of computing SegmentName,SectionName.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170095 91177308-0d34-0410-b5e6-96231b3b80d8
In a previous thread it was pointed out that isPowerOfTwo is not a very precise
name since it can return false for powers of two if it is unable to show that
they are powers of two.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170093 91177308-0d34-0410-b5e6-96231b3b80d8
Provides m_Argument that allows matching against a CallSite's specified argument. Provides m_Intrinsic pattern that can be templatized over the intrinsic id and bind/match arguments similarly to other pattern matchers. Implementations provided for 0 to 4 arguments, though it's very simple to extend for more. Also provides example template specialization for bswap (m_BSwap) and example of code cleanup for its use.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170091 91177308-0d34-0410-b5e6-96231b3b80d8
Also add an MIBundleBuilder constructor that takes an existing bundle.
Together these functions make it possible to add instructions to
existing bundles.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170063 91177308-0d34-0410-b5e6-96231b3b80d8
PowerPC target. This is the last of the four models, so we now have
full TLS support.
This is mostly a straightforward extension of the general dynamic model.
I had to use an additional Chain operand to tie ADDIS_DTPREL_HA to the
register copy following ADDI_TLSLD_L; otherwise everything above the
ADDIS_DTPREL_HA appeared dead and was removed.
As before, there are new test cases to test the assembly generation, and
the relocations output during integrated assembly. The expected code
gen sequence can be read in test/CodeGen/PowerPC/tls-ld.ll.
There are a couple of things I think can be done more efficiently in the
overall TLS code, so there will likely be a clean-up patch forthcoming;
but for now I want to be sure the functionality is in place.
Bill
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170003 91177308-0d34-0410-b5e6-96231b3b80d8