r165941: Resubmit the changes to llvm core to update the functions to
support different pointer sizes on a per address space basis.
Despite this commit log, this change primarily changed stuff outside of
VMCore, and those changes do not carry any tests for correctness (or
even plausibility), and we have consistently found questionable or flat
out incorrect cases in these changes. Most of them are probably correct,
but we need to devise a system that makes it more clear when we have
handled the address space concerns correctly, and ideally each pass that
gets updated would receive an accompanying test case that exercises that
pass specificaly w.r.t. alternate address spaces.
However, from this commit, I have retained the new C API entry points.
Those were an orthogonal change that probably should have been split
apart, but they seem entirely good.
In several places the changes were very obvious cleanups with no actual
multiple address space code added; these I have not reverted when
I spotted them.
In a few other places there were merge conflicts due to a cleaner
solution being implemented later, often not using address spaces at all.
In those cases, I've preserved the new code which isn't address space
dependent.
This is part of my ongoing effort to clean out the partial address space
code which carries high risk and low test coverage, and not likely to be
finished before the 3.2 release looms closer. Duncan and I would both
like to see the above issues addressed before we return to these
changes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167222 91177308-0d34-0410-b5e6-96231b3b80d8
isa<> et al. automatically infer when the cast is an upcast (including a
self-cast), so these are no longer necessary.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165767 91177308-0d34-0410-b5e6-96231b3b80d8
This classof() is effectively saying that a MachineCodeEmitter "is-a"
JITEmitter, but JITEmitter is in fact a descendant of
MachineCodeEmitter, so this is not semantically correct. Consequently,
none of the assertions that rely on these classof() actualy check
anything.
Remove the RTTI (which didn't actually check anything) and use
static_cast<> instead.
Post-Mortem Bug Analysis
========================
Cause of the bug
----------------
r55022 appears to be the source of the classof() and assertions removed
by this commit. It aimed at removing some dynamic_cast<> that were
solely in the assertions. A typical diff hunk from that commit looked
like:
- assert(dynamic_cast<JITEmitter*>(MCE) && "Unexpected MCE?");
- JITEmitter *JE = static_cast<JITEmitter*>(getCodeEmitter());
+ assert(isa<JITEmitter>(MCE) && "Unexpected MCE?");
+ JITEmitter *JE = cast<JITEmitter>(getCodeEmitter());
Hence, the source of the bug then seems to be an attempt to replace
dynamic_cast<> with LLVM-style RTTI without properly setting up the
class hierarchy for LLVM-style RTTI. The bug therefore appears to be
simply a "thinko".
What initially indicated the presence of the bug
------------------------------------------------
After implementing automatic upcasting for isa<>, classof() functions of
the form
static bool classof(const Foo *) { return true; }
were removed, since they only serve the purpose of optimizing
statically-OK upcasts. A subsequent recompilation triggered a build
failure on the isa<> tests within the removed asserts, since the
automatic upcasting (correctly) failed to substitute this classof().
Key to pinning down the root cause of the bug
---------------------------------------------
After being alerted to the presence of the bug, some thought about the
semantics which were being asserted by the buggy classof() revealed that
it was incorrect.
How the bug could have been prevented
-------------------------------------
This bug could have been prevented by better documentation for how to
set up LLVM-style RTTI. This should be solved by the recently added
documentation HowToSetUpLLVMStyleRTTI. However, this bug suggests that
the documentation should clearly explain the contract that classof()
must fulfill. The HowToSetUpLLVMStyleRTTI already explains this
contract, but it is a little tucked away. A future patch will expand
that explanation and make it more prominent.
There does not appear to be a simple way to have the compiler prevent
this bug, since fundamentally it boiled down to a spurious classof()
where the programmer made an erroneous statement about the conversion.
This suggests that perhaps the interface to LLVM-style RTTI of classof()
is not the best. There is already some evidence for this, since in a
number of places Clang has classof() forward to classofKind(Kind K)
which evaluates the cast in terms of just the Kind. This could probably
be generalized to simply a `static const Kind MyKind;` field in leaf
classes and `static const Kind firstMyKind, lastMyKind;` for non-leaf
classes, and have the rest of the work be done inside Casting.h,
assuming that the Kind enum is laid out in a preorder traversal of the
inheritance tree.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165764 91177308-0d34-0410-b5e6-96231b3b80d8
This adds 'elf' as a recognized target triple environment value and overrides the default generated object format on Windows platforms if that value is present. This patch also enables MCJIT tests on Windows using the new environment value.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165030 91177308-0d34-0410-b5e6-96231b3b80d8
The assumption that the target address for the relocation will always be
sizeof(intptr_t) and will always contain an addend for the relocation
value is very wrong. Default to no addend for now.
rdar://12157052
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163765 91177308-0d34-0410-b5e6-96231b3b80d8
When comparing to the macho relocation type enum value, make sure we're only
comparing against the bits in the RelType that correspond.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163764 91177308-0d34-0410-b5e6-96231b3b80d8
Make sure to return a pointer into the target memory, not the local memory.
Often they are the same, but we can't assume that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163217 91177308-0d34-0410-b5e6-96231b3b80d8
The MCJIT doesn't need or want a TargetJITInfo. That's vestigal from the old
JIT, so just remove it.
rdar://12119347
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162280 91177308-0d34-0410-b5e6-96231b3b80d8
No new tests are added.
All tests in ExecutionEngine/MCJIT that have been failing pass after this patch
is applied (when "make check" is done on a mips board).
Patch by Petar Jovanovic.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162135 91177308-0d34-0410-b5e6-96231b3b80d8
allocations of executable memory would not be padded
to account for the size of the allocation header.
This resulted in undersized allocations, meaning that
when the allocation was written to later the next
allocation's header would be corrupted.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161984 91177308-0d34-0410-b5e6-96231b3b80d8
include/llvm/Analysis/DebugInfo.h to include/llvm/DebugInfo.h.
The reasoning is because the DebugInfo module is simply an interface to the
debug info MDNodes and has nothing to do with analysis.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159312 91177308-0d34-0410-b5e6-96231b3b80d8
LLVM is now -Wunused-private-field clean except for
- lib/MC/MCDisassembler/Disassembler.h. Not sure why it keeps all those unaccessible fields.
- gtest.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158096 91177308-0d34-0410-b5e6-96231b3b80d8
IntRange converted from struct to class. So main change everywhere is replacement of ".Low/High" with ".getLow/getHigh()"
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157884 91177308-0d34-0410-b5e6-96231b3b80d8
IntItem cleanup. IntItemBase, IntItemConstantIntImp and IntItem merged into IntItem. All arithmetic operators was propogated from APInt. Also added comparison operators <,>,<=,>=. Currently you will find set of macros that propogates operators from APInt to IntItem in the beginning of IntegerSubset. Note that THESE MACROS WILL REMOVED after all passes will case-ranges compatible. Also note that these macros much smaller pain that something like this:
if (V->getValue().ugt(AnotherV->getValue()) { ... }
These changes made IntItem full featured integer object. It allows to make IntegerSubset class generic (move out all ConstantInt references inside and add unit-tests) in next commits.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157810 91177308-0d34-0410-b5e6-96231b3b80d8
Implemented IntItem - the wrapper around APInt. Why not to use APInt item directly right now?
1. It will very difficult to implement case ranges as series of small patches. We got several large and heavy patches. Each patch will about 90-120 kb. If you replace ConstantInt with APInt in SwitchInst you will need to changes at the same time all Readers,Writers and absolutely all passes that uses SwitchInst.
2. We can implement APInt pool inside and save memory space. E.g. we use several switches that works with 256 bit items (switch on signatures, or strings). We can avoid value duplicates in this case.
3. IntItem can be easyly easily replaced with APInt.
4. Currenly we can interpret IntItem both as ConstantInt and as APInt. It allows to provide SwitchInst methods that works with ConstantInt for non-updated passes.
Why I need it right now? Currently I need to update SimplifyCFG pass (EqualityComparisons). I need to work with APInts directly a lot, so peaces of code
ConstantInt *V = ...;
if (V->getValue().ugt(AnotherV->getValue()) {
...
}
will look awful. Much more better this way:
IntItem V = ConstantIntVal->getValue();
if (AnotherV < V) {
}
Of course any reviews are welcome.
P.S.: I'm also going to rename ConstantRangesSet to IntegersSubset, and CRSBuilder to IntegersSubsetMapping (allows to map individual subsets of integers to the BasicBlocks).
Since in future these classes will founded on APInt, it will possible to use them in more generic ways.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157576 91177308-0d34-0410-b5e6-96231b3b80d8
It's more flexible for MCJIT tasks, in addition it's provides a invalidation instruction cache for code sections which will be used before JIT code will be executed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156933 91177308-0d34-0410-b5e6-96231b3b80d8
optional library support to the llvm-build tool:
- Add new command line parameter to llvm-build: “--enable-optional-libraries”
- Add handing of new llvm-build library type “OptionalLibrary”
- Update Cmake and automake build systems to pass correct flags to llvm-build
based on configuration
Patch by Dan Malea!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156319 91177308-0d34-0410-b5e6-96231b3b80d8
- Improved parameter names for clarity
- Added comments
- emitCommonSymbols should return void because its return value is not being
used anywhere
- Attempt to reduce the usage of the RelocationValueRef type. Restricts it
for a single goal and may serve as a step for eventual removal.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155908 91177308-0d34-0410-b5e6-96231b3b80d8
- There's no point having a different type for the local and global symbol
tables.
- Renamed SymbolTable to GlobalSymbolTable to clarify the intention
- Improved const correctness where relevant
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155898 91177308-0d34-0410-b5e6-96231b3b80d8
relocations are resolved. It's much more reasonable to do this decision when
relocations are just being added - we have all the information at that point.
Also a bit of renaming and extra comments to clarify extensions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155819 91177308-0d34-0410-b5e6-96231b3b80d8
- Add comments
- Change field names to be more reasonable
- Fix indentation and naming to conform to coding conventions
- Remove unnecessary includes / replace them by forward declatations
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155815 91177308-0d34-0410-b5e6-96231b3b80d8
the MCJIT execution engine.
The GDB JIT debugging integration support works by registering a loaded
object image with a pre-defined function that GDB will monitor if GDB
is attached. GDB integration support is implemented for ELF only at this
time. This integration requires GDB version 7.0 or newer.
Patch by Andy Kaylor!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154868 91177308-0d34-0410-b5e6-96231b3b80d8
of zero-initialized sections, virtual sections and common symbols
and preventing the loading of sections which are not required for
execution such as debug information.
Patch by Andy Kaylor!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154610 91177308-0d34-0410-b5e6-96231b3b80d8
1. The main works will made in the RuntimeDyLdImpl with uses the ObjectFile class. RuntimeDyLdMachO and RuntimeDyLdELF now only parses relocations and resolve it. This is allows to make improvements of the RuntimeDyLd more easily. In addition the support for COFF can be easily added.
2. Added ARM relocations to RuntimeDyLdELF.
3. Added support for stub functions for the ARM, allowing to do a long branch.
4. Added support for external functions that are not loaded from the object files, but can be loaded from external libraries. Now MCJIT can correctly execute the code containing the printf, putc, and etc.
5. The sections emitted instead functions, thanks Jim Grosbach. MemoryManager.startFunctionBody() and MemoryManager.endFunctionBody() have been removed.
6. MCJITMemoryManager.allocateDataSection() and MCJITMemoryManager. allocateCodeSection() used JMM->allocateSpace() instead of JMM->allocateCodeSection() and JMM->allocateDataSection(), because I got an error: "Cannot allocate an allocated block!" with object file contains more than one code or data sections.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153754 91177308-0d34-0410-b5e6-96231b3b80d8
relocations. The algorithm is the same as
that for x86_64. Scattered relocations, a
feature present in i386 but not on x86_64,
are not yet supported.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153466 91177308-0d34-0410-b5e6-96231b3b80d8
This is necessary if the client wants to be able to mutate TargetOptions (for example, fast FP math mode) after the initial creation of the ExecutionEngine.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153342 91177308-0d34-0410-b5e6-96231b3b80d8
(and hopefully on Windows). The bots have been down most of the day
because of this, and it's not clear to me what all will be required to
fix it.
The commits started with r153205, then r153207, r153208, and r153221.
The first commit seems to be the real culprit, but I couldn't revert
a smaller number of patches.
When resubmitting, r153207 and r153208 should be folded into r153205,
they were simple build fixes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153241 91177308-0d34-0410-b5e6-96231b3b80d8
1. Declare a virtual function getPointerToNamedFunction() in JITMemoryManager
2. Move the implementation of getPointerToNamedFunction() form JIT/MCJIT to DefaultJITMemoryManager.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153205 91177308-0d34-0410-b5e6-96231b3b80d8
relocations (i.e., pieces of data whose addresses
are referred to elsewhere in the binary image) and
update the references when the section containing
the relocations moves. The way this works is that
there is a map from section IDs to lists of
relocations.
Because the relocations are associated with the
section containing the data being referred to, they
are updated only when the target moves. However,
many data references are relative and also depend
on the location of the referrer.
To solve this problem, I introduced a new data
structure, Referrer, which simply contains the
section being referred to and the index of the
relocation in that section. These referrers are
associated with the source containing the
reference that needs to be updated, so now
regardless of which end of the relocation moves,
the relocation will now be updated correctly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153147 91177308-0d34-0410-b5e6-96231b3b80d8
Also refactor the existing OProfile profiling code to reuse the same interfaces with the VTune profiling code.
In addition, unit tests for the profiling interfaces were added.
This patch was prepared by Andrew Kaylor and Daniel Malea, and reviewed in the llvm-commits list by Jim Grosbach
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152620 91177308-0d34-0410-b5e6-96231b3b80d8
Renamed methods caseBegin, caseEnd and caseDefault with case_begin, case_end, and case_default.
Added some notes relative to case iterators.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152532 91177308-0d34-0410-b5e6-96231b3b80d8
http://lists.cs.uiuc.edu/pipermail/llvm-commits/Week-of-Mon-20120130/136146.html
Implemented CaseIterator and it solves almost all described issues: we don't need to mix operand/case/successor indexing anymore. Base iterator class is implemented as a template since it may be initialized either from "const SwitchInst*" or from "SwitchInst*".
ConstCaseIt is just a read-only iterator.
CaseIt is read-write iterator; it allows to change case successor and case value.
Usage of iterator allows totally remove resolveXXXX methods. All indexing convertions done automatically inside the iterator's getters.
Main way of iterator usage looks like this:
SwitchInst *SI = ... // intialize it somehow
for (SwitchInst::CaseIt i = SI->caseBegin(), e = SI->caseEnd(); i != e; ++i) {
BasicBlock *BB = i.getCaseSuccessor();
ConstantInt *V = i.getCaseValue();
// Do something.
}
If you want to convert case number to TerminatorInst successor index, just use getSuccessorIndex iterator's method.
If you want initialize iterator from TerminatorInst successor index, use CaseIt::fromSuccessorIndex(...) method.
There are also related changes in llvm-clients: klee and clang.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152297 91177308-0d34-0410-b5e6-96231b3b80d8
code that will be relocated into another memory space.
Now when relocations are resolved, the address of
the relocation in the host memory (where the JIT is)
is passed separately from the address that the
relocation will be at in the target memory (where
the code will run).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152264 91177308-0d34-0410-b5e6-96231b3b80d8
In historical reason, Interpreter's external entries had prefix "lle_X_" as C linkage, even for well-known entries in EE/Interpreter.
Now, at least on ToT, they are resolved via FuncNames[] mapper.
We will not need their symbols are expected to be exported any more.
Clang r150128 has introduced the warning <"%0 has C-linkage specified, but returns user-defined type %1 which is incompatible with C">.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151312 91177308-0d34-0410-b5e6-96231b3b80d8
- Use unsigned literals when the desired result is unsigned. This mostly allows unsigned/signed mismatch warnings to be less noisy even if they aren't on by default.
- Remove misplaced llvm_unreachable.
- Add static to a declaration of a function on MSVC x86 only.
- Change some instances of calling a static function through a variable to simply calling that function while removing the unused variable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@150364 91177308-0d34-0410-b5e6-96231b3b80d8
to what's done for MachO and COFF. This allows advanced uses of the class to
be implemented outside the Object library. In particular, the DyldELFObject
subclass is now moved into its logical home - ExecutionEngine/RuntimeDyld.
This patch was reviewed by Michael Spencer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@150327 91177308-0d34-0410-b5e6-96231b3b80d8
needed to emit a 64-bit gp-relative relocation entry. Make changes necessary
for emitting jump tables which have entries with directive .gpdword. This patch
does not implement the parts needed for direct object emission or JIT.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@149668 91177308-0d34-0410-b5e6-96231b3b80d8
The purpose of refactoring is to hide operand roles from SwitchInst user (programmer). If you want to play with operands directly, probably you will need lower level methods than SwitchInst ones (TerminatorInst or may be User). After this patch we can reorganize SwitchInst operands and successors as we want.
What was done:
1. Changed semantics of index inside the getCaseValue method:
getCaseValue(0) means "get first case", not a condition. Use getCondition() if you want to resolve the condition. I propose don't mix SwitchInst case indexing with low level indexing (TI successors indexing, User's operands indexing), since it may be dangerous.
2. By the same reason findCaseValue(ConstantInt*) returns actual number of case value. 0 means first case, not default. If there is no case with given value, ErrorIndex will returned.
3. Added getCaseSuccessor method. I propose to avoid usage of TerminatorInst::getSuccessor if you want to resolve case successor BB. Use getCaseSuccessor instead, since internal SwitchInst organization of operands/successors is hidden and may be changed in any moment.
4. Added resolveSuccessorIndex and resolveCaseIndex. The main purpose of these methods is to see how case successors are really mapped in TerminatorInst.
4.1 "resolveSuccessorIndex" was created if you need to level down from SwitchInst to TerminatorInst. It returns TerminatorInst's successor index for given case successor.
4.2 "resolveCaseIndex" converts low level successors index to case index that curresponds to the given successor.
Note: There are also related compatability fix patches for dragonegg, klee, llvm-gcc-4.0, llvm-gcc-4.2, safecode, clang.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@149481 91177308-0d34-0410-b5e6-96231b3b80d8