ARM bots (& others, I think, now that I look) were failing because we
were using incorrect printf-style format specifiers. They were wrong
on almost any platform, actually, just mostly harmlessly so.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215196 91177308-0d34-0410-b5e6-96231b3b80d8
be deleted. This will be reapplied as soon as possible and before
the 3.6 branch date at any rate.
Approved by Jim Grosbach, Lang Hames, Rafael Espindola.
This reverts commits r215111, 215115, 215116, 215117, 215136.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215154 91177308-0d34-0410-b5e6-96231b3b80d8
I am sure we will be finding bits and pieces of dead code for years to
come, but this is a good start.
Thanks to Lang Hames for making MCJIT a good replacement!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215111 91177308-0d34-0410-b5e6-96231b3b80d8
Also make the disassembler created with the Mach-O parser (the -m option)
pick up the Target specific attributes specified with -mattr option.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215032 91177308-0d34-0410-b5e6-96231b3b80d8
mode.
This will cause -verify mode to report failure when RuntimeDyld encounters an
internal error (e.g. overflows in relocation computations). Previously we had
let these errors slip past unreported.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214925 91177308-0d34-0410-b5e6-96231b3b80d8
This is mostly a cleanup, but it changes a fairly old behavior.
Every "real" LTO user was already disabling the silly internalize pass
and creating the internalize pass itself. The difference with this
patch is for "opt -std-link-opts" and the C api.
Now to get a usable behavior out of opt one doesn't need the funny
looking command line:
opt -internalize -disable-internalize -internalize-public-api-list=foo,bar -std-link-opts
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214919 91177308-0d34-0410-b5e6-96231b3b80d8
Updated `verify-uselistorder` to more than double the number of use-list
orders it checks.
- Every time it verifies an order, it then reverses the order and
verifies again.
- It now verifies the initial order, before running any shuffles.
Changed the default to `-num-shuffles=1`, since this is already four
checks, and after r214584 shuffling is guaranteed to make a new order.
This is part of PR5680.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214596 91177308-0d34-0410-b5e6-96231b3b80d8
`shuffleUseLists()` is only used in `verify-uselistorder`, so move it
there to avoid bloating other executables. As a drive-by, update some
of the header docs.
This is part of PR5680.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214592 91177308-0d34-0410-b5e6-96231b3b80d8
Also fix the error handling. No testcaes, issue found by inspection.
Thanks to David Blaikie for the suggestion.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214535 91177308-0d34-0410-b5e6-96231b3b80d8
Instead of moving out the data in a ErrorOr<std::unique_ptr<Foo>>, get
a reference to it.
Thanks to David Blaikie for the suggestion.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214516 91177308-0d34-0410-b5e6-96231b3b80d8
"Create a default symver on Linux like ELF OSes."
Fails the build under Debian with ld.gold:
/usr/bin/ld.gold: --default-symver: unknown option
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214482 91177308-0d34-0410-b5e6-96231b3b80d8
Change the default for `-num-shuffles` to 5 and better document the
algorithm in the header docs of `verify-uselistorder`.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214419 91177308-0d34-0410-b5e6-96231b3b80d8
Turns out `parseBitcodeFile()` does *not* take ownership of the buffer.
This was already clear in the header docs, but I obviously didn't read
them (having noticed that it gets stored in a `unique_ptr<>`).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214313 91177308-0d34-0410-b5e6-96231b3b80d8
use in -verify mode.
This patch adds three hidden command line options to llvm-rtdyld:
-target-addr-start <start-addr> : Specify the start of the virtual address
space on the phony target.
-target-addr-end <end-addr> : Specify the end of the virtual address space
on the phony target.
-target-section-sep <sep> : Specify the separation (in bytes) between the
end of one section and the start of the next.
These options automatically default to sane values for the target platform. In
particular, they allow narrow (e.g. 32-bit, 16-bit) targets to be tested from
wider (e.g. 64-bit, 32-bit) hosts without overflowing pointers.
The section separation option defaults to zero, but can be set to a large number
(e.g. 1 << 32) to force large separations between sections in order to
stress-test large-code-model code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214255 91177308-0d34-0410-b5e6-96231b3b80d8
Predict and serialize use-list order in bitcode. This makes the option
`-preserve-bc-use-list-order` work *most* of the time, but this is still
experimental.
- Builds a full value-table up front in the writer, sets up a list of
use-list orders to write out, and discards the table. This is a
simpler first step than determining the order from the various
overlapping IDs of values on-the-fly.
- The shuffles stored in the use-list order list have an unnecessarily
large memory footprint.
- `blockaddress` expressions cause functions to be materialized
out-of-order. For now I've ignored this problem, so use-list orders
will be wrong for constants used by functions that have block
addresses taken. There are a couple of ways to fix this, but I
don't have a concrete plan yet.
- When materializing functions lazily, the use-lists for constants
will not be correct. This use case is out of scope: what should the
use-list order be, if it's incomplete?
This is part of PR5680.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214125 91177308-0d34-0410-b5e6-96231b3b80d8
The gcov compatible code is moved to its own file and
llvm-cov is updated to be a wrapper that always calls
the gcov main function.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214107 91177308-0d34-0410-b5e6-96231b3b80d8
Ugh. Turns out not even transformation passes link in how to read IR.
I sincerely believe the buildbots will finally agree with my system
after this though. (I don't really understand why all of this has been
working on my system, but not on all the buildbots.)
Create a new tool called llvm-uselistorder to use for verifying use-list
order. For now, just dump everything from the (now defunct)
-verify-use-list-order pass into the tool.
This might be a better way to test use-list order anyway.
Part of PR5680.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213957 91177308-0d34-0410-b5e6-96231b3b80d8
StringMap doesn't guarantee any particular iteration order,
this is suboptimal when comparing llvm-vtabledump's output for two
object files.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213921 91177308-0d34-0410-b5e6-96231b3b80d8
The -print-file-name option in llvm-nm is to precede each symbol
with the object file it came from. While code for the parsing of this
option and its aliases existed there was no code to implement it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213906 91177308-0d34-0410-b5e6-96231b3b80d8
This tool's job is to dump the vtables inside object files. It is
currently limited to MS ABI vf- and vb-tables but it will eventually
support Itanium-style v-tables as well.
Differential Revision: http://reviews.llvm.org/D4584
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213903 91177308-0d34-0410-b5e6-96231b3b80d8
This allows people to try clang inside MSBuild with the VS "14" CTP
releases.
Fixes PR20341.
Patch by Marcel Raad!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213819 91177308-0d34-0410-b5e6-96231b3b80d8
This patch introduces a 'stub_addr' builtin that can be used to find the address
of the stub for a given (<file>, <section>, <symbol>) tuple. This address can be
used both to verify the contents of stubs (by loading from the returned address)
and to verify references to stubs (by comparing against the returned address).
Example (1) - Verifying stub contents:
Load 8 bytes (assuming a 64-bit target) from the stub for 'x' in the __text
section of f.o, and compare that value against the addres of 'x'.
# rtdyld-check: *{8}(stub_addr(f.o, __text, x) = x
Example (2) - Verifying references to stubs:
Decode the immediate of the instruction at label 'l', and verify that it's
equal to the offset from the next instruction's PC to the stub for 'y' in the
__text section of f.o (i.e. it's the correct PC-rel difference).
# rtdyld-check: decode_operand(l, 4) = stub_addr(f.o, __text, y) - next_pc(l)
l:
movq y@GOTPCREL(%rip), %rax
Since stub inspection requires cooperation with RuntimeDyldImpl this patch
pimpl-ifies RuntimeDyldChecker. Its implementation is moved in to a new class,
RuntimeDyldCheckerImpl, that has access to the definition of RuntimeDyldImpl.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213698 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r213474 (and r213475), which causes a miscompile on
a stage2 LTO build. I'll reply on the list in a moment.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213562 91177308-0d34-0410-b5e6-96231b3b80d8
createBinary documented that it destroyed the parameter in error cases,
though by observation it does not. By passing the unique_ptr by value
rather than lvalue reference, callers are now explicit about passing
ownership and the function implements the documented contract. Remove
the explicit documentation, since now the behavior cannot be anything
other than what was documented, so it's redundant.
Also drops a unique_ptr::release in llvm-nm that was always run on a
null unique_ptr anyway.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213557 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: This patch introduces two new iterator ranges and updates existing code to use it. No functional change intended.
Test Plan: All tests (make check-all) still pass.
Reviewers: dblaikie
Reviewed By: dblaikie
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D4481
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213474 91177308-0d34-0410-b5e6-96231b3b80d8
Until now, attempting to create an alias of a required option would
complain if the user supplied the alias, because the required option
didn't have a value. Similarly, if you said the alias was required,
then using the base option would complain that the alias wasn't
supplied. Lastly, if you put required on both, *neither* option would
work.
By changning alias to overload addOccurrence and setting cl::Required
on the original option, we can get this to behave in a more useful
way. I've also added a test and updated a user that was getting this
wrong.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212986 91177308-0d34-0410-b5e6-96231b3b80d8
The size of the uninitialized sections, like BSS, can exceed the size of
the object file.
Do not attempt to grab the contents of such sections.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212953 91177308-0d34-0410-b5e6-96231b3b80d8
the specified section. This is same functionality as darwin’s nm(1) "-s" flag.
There is one FIXME in the code and I’m all ears to anyone that can help me
with that. This option takes exactly two strings and should be allowed
anywhere on the command line. Such that "llvm-nm -s __TEXT __text foo.o"
would work. But that does not as the CommandLine Library does not have a
way to make this work as far as I can tell. For now the "-s __TEXT __text"
has to be last on the command line.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212842 91177308-0d34-0410-b5e6-96231b3b80d8
This will allow the "-s" flag to implemented in the future as it
is in darwin’s nm(1) to list symbols only in the specified section.
Given a LGTM by Shankar Easwaran who originally implemented
the support for lvm-nm’s -print-armap and archive map symbols.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212576 91177308-0d34-0410-b5e6-96231b3b80d8
Use 0 for the invalid buffer instead of -1/~0 and switch to unsigned
representation to enable more idiomatic usage.
Also introduce a trivial SourceMgr::getMainFileID() instead of hard-coding 0/1
to identify the main file.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212398 91177308-0d34-0410-b5e6-96231b3b80d8
There were two issues here:
1. At the very least, scattered relocations cannot use the same code to
determine the corresponding symbol being referred to. For some reason we
pretend there is no symbol, even when one actually exists in the symtab, so to
match this behaviour getRelocationSymbol should simply return symbols_end for
scattered relocations.
2. Printing "-" when we can't get a symbol (including the scattered case, but
not exclusively), isn't that helpful. In both cases there *is* interesting
information in that field, so we should print it. As hex will do.
Small part of rdar://problem/17553104
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212332 91177308-0d34-0410-b5e6-96231b3b80d8
We want to encourage users of the C++ LTO API to reuse memory buffers instead
of repeatedly opening and reading the same file contents.
This reverts commit r212305 and implements a tidier scheme.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212308 91177308-0d34-0410-b5e6-96231b3b80d8
On at least my machine, ar does not register an all symbols read hook (which
previously triggered target initialization), but it does register a claim
files hook, which depends on the targets being initialized.
Differential Revision: http://reviews.llvm.org/D4372
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212303 91177308-0d34-0410-b5e6-96231b3b80d8
symbol’s name. On darwin the -j flag is used (often in combinations
with other flags) to produce a complete list of symbol names which
than can then be reorder and used with ld(1)’s -order_file.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212294 91177308-0d34-0410-b5e6-96231b3b80d8
This should allow llvm-ar to be used instead of gnu ar + plugin in a LTO
build. I will add a release note about it once I finish a LTO bootstrap with it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212287 91177308-0d34-0410-b5e6-96231b3b80d8
Now that we have a lib/MC/MCAnalysis, the dependency was there just because
of two helper classes. Move the two over to MC.
This will allow IRObjectFile to parse inline assembly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212248 91177308-0d34-0410-b5e6-96231b3b80d8
The new library is 150KB on a Release+Asserts build, so it is quiet a bit of
code that regular users of MC don't need to link with now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212209 91177308-0d34-0410-b5e6-96231b3b80d8
to select the slice out of a Mach-O universal file. This also includes
support for -arch all, selecting the host architecture by default from
a universal file and checking if -arch is used with a standard Mach-O
it matches that architecture.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212108 91177308-0d34-0410-b5e6-96231b3b80d8
universal file. This also includes support for -arch all, selecting the host
architecture by default from a universal file and checking if -arch is used
with a standard Mach-O it matches that architecture.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212054 91177308-0d34-0410-b5e6-96231b3b80d8
Make llvm-cov compatible with gcov for cases where multiple files are
specified on the command line. That is, loop over each one and report
coverage, and report errors on stderr only rather than via return
code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211959 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds a "-verify" mode to the llvm-rtdyld utility. In verify mode,
llvm-rtdyld will test supplied expressions against the linked program images
that it creates in memory. This scheme can be used to verify the correctness
of the relocation logic applied by RuntimeDyld.
The expressions to test will be read out of files passed via the -check option
(there may be more than one of these). Expressions to check are extracted from
lines of the form:
# rtdyld-check: <expression>
This system is designed to fit the llvm-lit regression test workflow. It is
format and target agnostic, and supports verification of images linked for
remote targets. The expression language is defined in
llvm/include/llvm/RuntimeDyldChecker.h . Examples can be found in
test/ExecutionEngine/RuntimeDyld.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211956 91177308-0d34-0410-b5e6-96231b3b80d8
Add the new AppContainer characteristic which is import for Windows Store
(Metro) compatible applications. Add the new Control Flow Guard flag to bring
the enumeration up to date with the current values as of Windows 8.1.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211855 91177308-0d34-0410-b5e6-96231b3b80d8
Any uses of tools/lto as a static lib should probably move to lib/LTO.
This was also never implemented in the configure build, so this reduces
the differences among the two.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211852 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes a regression that made clang -flto -Wl,--plugin-opt=-mattr=+aes not
pass the "+aes" option to the LTOCodeGenerator attributes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211804 91177308-0d34-0410-b5e6-96231b3b80d8
string_ostream is a safe and efficient string builder that combines opaque
stack storage with a built-in ostream interface.
small_string_ostream<bytes> additionally permits an explicit stack storage size
other than the default 128 bytes to be provided. Beyond that, storage is
transferred to the heap.
This convenient class can be used in most places an
std::string+raw_string_ostream pair or SmallString<>+raw_svector_ostream pair
would previously have been used, in order to guarantee consistent access
without byte truncation.
The patch also converts much of LLVM to use the new facility. These changes
include several probable bug fixes for truncated output, a programming error
that's no longer possible with the new interface.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211749 91177308-0d34-0410-b5e6-96231b3b80d8
This makes the buffer ownership on error conditions very natural. The buffer
is only moved out of the argument if an object is constructed that now
owns the buffer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211546 91177308-0d34-0410-b5e6-96231b3b80d8
This allows us to just use a std::unique_ptr to store the pointer to the buffer.
The flip side is that they have to support releasing the buffer back to the
caller.
Overall this looks like a more efficient and less brittle api.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211542 91177308-0d34-0410-b5e6-96231b3b80d8
to match llvm-size and other UNIX systems for their nm(1).
Tweak test cases that used llvm-nm with standard input to add a "-" to
indicate that and add a test case to check the default of a.out for llvm-nm.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211529 91177308-0d34-0410-b5e6-96231b3b80d8
the tool is given multiple files. Also fix the same issue with Mach-O
universal files. And fix the newline spacing to separate the output
in these cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211405 91177308-0d34-0410-b5e6-96231b3b80d8
Back in r128440 tools/LTO started exporting the disassembler interface. It
was never clear why, but whatever the reason I am pretty sure it doesn't hold
for tools/gold.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211325 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes the processing of --plugin-opt=-jump-table-type=arity.
Nice properties:
* We call InitTargetOptionsFromCodeGenFlags once.
* We call parseCodeGenDebugOptions once.
* It works :-)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211322 91177308-0d34-0410-b5e6-96231b3b80d8
fat files) to print “ (for architecture XYZ)” for fat files with more than
one architecture to be like what the darwin tools do for fat files.
Also clean up the Mach-O printing of archive membernames in llvm-nm to use
the darwin form of "libx.a(foo.o)".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211316 91177308-0d34-0410-b5e6-96231b3b80d8
The tools/lto API is not the best choice for implementing a gold plugin. Among
other issues:
* It is an stable ABI. Old errors stay and we have to be really careful
before adding new features.
* It has to support two fairly different linkers: gold and ld64.
* We end up with a plugin that depends on a shared lib, something quiet
unusual in LLVM land.
* It hides LLVM. For some features in the gold plugin it would be really
nice to be able to just get a Module or a GlobalValue.
This change is intended to be a very direct translation from the C API. It
will just enable other fixes and cleanups.
Tested with a LTO bootstrap on linux.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211315 91177308-0d34-0410-b5e6-96231b3b80d8
dynamic-no-pic is just another output type. If gnu ld gets support for MachO,
it should also add something like LDPO_DYN_NO_PIC to the plugin interface.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211305 91177308-0d34-0410-b5e6-96231b3b80d8
used by all of the MC level tools and codegen. Fix up all uses
in the compiler to use this and set it on the context accordingly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211257 91177308-0d34-0410-b5e6-96231b3b80d8
fat files containing archives.
Also fix a bug in MachOUniversalBinary::ObjectForArch::ObjectForArch()
where it needed a >= when comparing the Index with the number of
objects in a fat file. As the index starts at 0.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211230 91177308-0d34-0410-b5e6-96231b3b80d8
and the -l option for the long format. Also when the object is a Mach-O
file and the format is berkeley produce output like darwin’s default size(1)
summary berkeley derived output.
Like System V format, there are also some small changes in how and where
the file names and archive member names are printed for darwin and
Mach-O.
Like the changes to llvm-nm these are the first steps in seeing if it is
possible to make llvm-size produce the same output as darwin's size(1).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211117 91177308-0d34-0410-b5e6-96231b3b80d8
Now that we have c++11, even things like ErrorOr<std::unique_ptr<...>> are
easy to use.
No intended functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211033 91177308-0d34-0410-b5e6-96231b3b80d8
While std::error_code itself seems to work OK in all platforms, there
are few annoying differences with regards to the std::errc enumeration.
This patch adds a simple llvm enumeration, which will hopefully avoid build
breakages in other platforms and surprises as we get more uses of
std::error_code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210920 91177308-0d34-0410-b5e6-96231b3b80d8
Without initializing the assembly printers a shared library build of opt is
linked with these libraries whereas for a static build these libraries are dead
code eliminated. This is unfortunate for plugins in case they want to use them,
as they neither can rely on opt to provide this functionality nor can they link
the printers in themselves as this breaks with a shared object build of opt.
This patch calls InitializeAllAsmPrinters() from opt, which increases the static
binary size from 50MB -> 52MB on my system (all backends compiled) and causes no
measurable increase in the time needed to run 'make check'.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210914 91177308-0d34-0410-b5e6-96231b3b80d8
This code was never being used and any use of it would look fairly strange.
For example, it would try to map a object_error::parse_failed to
std::errc::invalid_argument.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210912 91177308-0d34-0410-b5e6-96231b3b80d8
This is a minimal change to remove the header. I will remove the occurrences
of "using std::error_code" in a followup patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210803 91177308-0d34-0410-b5e6-96231b3b80d8
Previously there was a separate mode entirely (--hdis vs.
--disassemble). It makes a bit more sense for the immediate printing
style to be a flag for --disassmeble rather than an entirely different
thing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210700 91177308-0d34-0410-b5e6-96231b3b80d8
The idea of this patch is to turn llvm/Support/system_error.h into a
transitional header that just brings in the erorr_code api to the llvm
namespace. I will remove it shortly afterwards.
The cases where the general idea needed some tweaking:
* std::errc is a namespace in msvc, so we cannot use "using std::errc". I could
add an #ifdef, but there were not that many uses, so I just added std:: to
them in this patch.
* Template specialization had to be moved to the std namespace in this
patch set already.
* The msvc implementation of default_error_condition doesn't seem to
provide the same transformations as we need. Not too surprising since
the standard doesn't actually say what "equivalent" means. I fixed the
problem by keeping our old mapping and using it at error_code
construction time.
Despite these shortcomings I think this is still a good thing. Some reasons:
* The different implementations of system_error might improve over time.
* It removes 925 lines of code from llvm already.
* It removes 6313 bytes from the text segment of the clang binary when
it is built with gcc and 2816 bytes when building with clang and
libstdc++.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210687 91177308-0d34-0410-b5e6-96231b3b80d8
Add a brief explanation of the data section layout for the unwind data that the
Windows on ARM EH models. This is simply to provide a rough idea of the layout
of the code involved in the decoding of the unwinding. Details on the involved
data structures are available in the associated support header. The bulk of it
is related to printing out the byte-code to help validate generation of WoA EH.
No functional change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210397 91177308-0d34-0410-b5e6-96231b3b80d8
This is a first step in seeing if it is possible to make llvm-nm produce
the same output as darwin's nm(1). Darwin's default format is bsd but its
-m output prints the longer Mach-O specific details. For now I added the
"-format darwin" to do this (whos name may need to change in the future).
As there are other Mach-O specific flags to nm(1) which I'm hoping to add some
how in the future. But I wanted to see if I could get the correct output for
-m flag using llvm-nm and the libObject interfaces.
I got this working but would love to hear what others think about this approach
to getting object/format specific details printed with llvm-nm.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210285 91177308-0d34-0410-b5e6-96231b3b80d8
r210177 added Makefiles to the lld project.
This revision enables the automatic build of lld when the sources are found in tools/lld.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210245 91177308-0d34-0410-b5e6-96231b3b80d8
Add support to llvm-readobj to decode Windows ARM Exception Handling data. This
uses the previously added datastructures to decode the information into a format
that can be used by tests. This is a necessary step to add support for emitting
Windows on ARM exception handling information.
A fair amount of formatting inspiration is drawn from the Win64 EH printer as
well as the ARM EHABI printer. This allows for a reasonably thorough look into
the encoded data.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210192 91177308-0d34-0410-b5e6-96231b3b80d8
Add a helper print method to print a boolean value as "Yes" or "No". This is
intended to be used by the Windows ARM EH printer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210191 91177308-0d34-0410-b5e6-96231b3b80d8
This patch changes GlobalAlias to point to an arbitrary ConstantExpr and it is
up to MC (or the system assembler) to decide if that expression is valid or not.
This reduces our ability to diagnose invalid uses and how early we can spot
them, but it also lets us do things like
@test5 = alias inttoptr(i32 sub (i32 ptrtoint (i32* @test2 to i32),
i32 ptrtoint (i32* @bar to i32)) to i32*)
An important implication of this patch is that the notion of aliased global
doesn't exist any more. The alias has to encode the information needed to
access it in its metadata (linkage, visibility, type, etc).
Another consequence to notice is that getSection has to return a "const char *".
It could return a NullTerminatedStringRef if there was such a thing, but when
that was proposed the decision was to just uses "const char*" for that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210062 91177308-0d34-0410-b5e6-96231b3b80d8
Input YAML file might contain multiple object file definitions.
New option `-docnum` allows to specify an ordinal number (starting from 1)
of definition used for an object file generation.
Patch reviewed by Sean Silva.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209967 91177308-0d34-0410-b5e6-96231b3b80d8
This makes LLVM create N_INDR aliases (to be resolved by the linker) when
appropriate.
rdar://problem/15125513
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209894 91177308-0d34-0410-b5e6-96231b3b80d8
field represents ELF section header sh_info field and does not have any
sense for regular sections. Its interpretation depends on section type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209801 91177308-0d34-0410-b5e6-96231b3b80d8
Remove the use of the std::function and replace the capturing lambda with a
non-capturing one, opting to pass the user data down to the context. This is
needed as std::function is not yet available on all hosted platforms (it
requires RTTI, which breaks on Windows).
Thanks to Nico Rieck for pointing this out!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209607 91177308-0d34-0410-b5e6-96231b3b80d8
Move the implementation of the Win64 EH printer from the COFFDumper into its own
class. This is in preparation for adding support to print ARM EH information.
The only real change here is in printUnwindInfo where we now lambda lift the
implicit this parameter for the resolveFunction. Also setup the printing to
handle ARM. This now has set the stage to introduce ARM EH printing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209606 91177308-0d34-0410-b5e6-96231b3b80d8
This inlines the single use function in preparation for splitting the Win64EH
printing out of the COFFDumper into its own entity.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209605 91177308-0d34-0410-b5e6-96231b3b80d8
Make the use of the cache more transparent to the users. There is no reason
that the cached entries really need to be passed along. The overhead for doing
so is minimal: a single extra parameter. This requires that some standalone
functions be brought into the COFFDumper class so that they may access the
cache.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209604 91177308-0d34-0410-b5e6-96231b3b80d8
Switch to use references for parameters that are guaranteed to be non-null.
Simplifies the code a slight bit in preparation for another change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209603 91177308-0d34-0410-b5e6-96231b3b80d8
Change --functions option in llvm-symbolizer tool to accept
values "none", "short" or "linkage". Update the tests and docs
accordingly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209050 91177308-0d34-0410-b5e6-96231b3b80d8
Now the only method to configure ELF section's content and size is to assign
a hexadecimal string to the `Content` field. Unfortunately this way is
completely useless when you need to declare a really large section.
To solve this problem this patch adds one more optional field `Size`
to the `RawContentSection` structure. When yaml2obj generates an ELF file
it uses the following algorithm:
1. If both `Content` and `Size` fields are missed create an empty section.
2. If only `Content` field is missed take section length from the `Size`
field and fill the section by zero.
3. If only `Size` field is missed create a section using data from
the `Content` field.
4. If both `Content` and `Size` fields are provided validate that the `Size`
value is not less than size of `Content` data. Than take section length
from the `Size`, fill beginning of the section by `Content` and the rest
by zero.
Examples
--------
* Create a section 0x10000 bytes long filled by zero
Name: .data
Type: SHT_PROGBITS
Flags: [ SHF_ALLOC ]
Size: 0x10000
* Create a section 0x10000 bytes long starting from 'CA' 'FE' 'BA' 'BE'
Name: .data
Type: SHT_PROGBITS
Flags: [ SHF_ALLOC ]
Content: CAFEBABE
Size: 0x10000
The patch reviewed by Michael Spencer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208995 91177308-0d34-0410-b5e6-96231b3b80d8
It is more appropriate than the current situation, when one flag
(AbsoluteFilePath) is relevant only if another flag is set.
This refactoring would also simplify fetching the short function name
(stored in DW_AT_name) instead of a linkage name returned currently.
No functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208921 91177308-0d34-0410-b5e6-96231b3b80d8
The ELF header e_flags field in the MIPS related test cases handled
incorrectly. The obj2yaml prints too many flags. I will fix that in the
next patches.
The patch reviewed by Michael Spencer and Sean Silva.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208752 91177308-0d34-0410-b5e6-96231b3b80d8
libraries before linking and executing the target objects.
This allows programs that use external calls (e.g. to libc) to be run under
llvm-rtdyld.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208739 91177308-0d34-0410-b5e6-96231b3b80d8
We were using libLLVM-Major.Minor.Patch.so for the soname, but we
need the soname to stay consistent for all Major.Minor.* releases
otherwise operating system distributors will need to rebuild all
packages that link with LLVM every time there is a new point release.
This patch also reverses the compatibility symlink, so
libLLVM-Major.Minor.Patch.so is now a symlink that points
to libLLVM-Major-Minor.so.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208721 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r208708.
I forgot to run make clean before testing this and it broke tools
linking.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208709 91177308-0d34-0410-b5e6-96231b3b80d8
We were using libLLVM-Major.Minor.Patch.so for the soname, but we
need the soname to stay consistent for all Major.Minor.* releases
otherwise operating system distributors will need to rebuild all
packages that link with LLVM every time there is a new point release.
This patch also reverses the compatibility symlink, so
libLLVM-Major.Minor.Patch.so is now a symlink that points
to libLLVM-Major-Minor.so.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208708 91177308-0d34-0410-b5e6-96231b3b80d8
The implementation might be better to have a method is64Bit() in the class
SymbolicFile instead of having the static routine isSymbolList64Bit() in
llvm-nm.cpp . But this is very much in the sprit of isObject() and
getNMTypeChar() in llvm-nm.cpp that has a series of if else statements
based on the specific class of the SymbolicFile. I can update this if
folks would like.
Also the tests were updated to be explicit about checking the address for
64-bits or 32-bits from object files.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208463 91177308-0d34-0410-b5e6-96231b3b80d8
interface methods isCOFF().
The '-coff' command line option has been removed. It was not used in any
test cases.
The patch reviewed by Michael Spencer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208157 91177308-0d34-0410-b5e6-96231b3b80d8
In gcov, there's a -n/--no-output option, which disables the writing
of any .gcov files, so that it emits only the summary info on stdout.
This implements the same behaviour in llvm-cov.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208148 91177308-0d34-0410-b5e6-96231b3b80d8
fall back to the normal path without a cpu. While doing this fix
llc to just exit when we don't have a module to process instead of
asserting.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208102 91177308-0d34-0410-b5e6-96231b3b80d8
We already do this for shstrtab, so might as well do it for strtab. This
extracts the string table building code into a separate class. The idea
is to use it for other object formats too.
I mostly wanted to do this for the general principle, but it does save a
little bit on object file size. I tried this on a clang bootstrap and
saved 0.54% on the sum of object file sizes (1.14 MB out of 212 MB for
a release build).
Differential Revision: http://reviews.llvm.org/D3533
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207670 91177308-0d34-0410-b5e6-96231b3b80d8
This starts in MCJIT::getSymbolAddress where the
unique_ptr<object::Binary> is release()d and (after a cast) passed to a
single caller, MCJIT::addObjectFile.
addObjectFile calls RuntimeDyld::loadObject.
RuntimeDld::loadObject calls RuntimeDyldELF::createObjectFromFile
And the pointer is never owned at this point. I say this point, because
the alternative codepath, RuntimeDyldMachO::createObjectFile certainly
does take ownership, so this seemed like a good hint that this was a/the
right place to take ownership.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207580 91177308-0d34-0410-b5e6-96231b3b80d8
This adds support for an -mattr option to the gold plugin and to llvm-lto. This
allows the caller to specify details of the subtarget architecture, like +aes,
or +ssse3 on x86. Note that this requires a change to the include/llvm-c/lto.h
interface: it adds a function lto_codegen_set_attr and it increments the
version of the interface.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207279 91177308-0d34-0410-b5e6-96231b3b80d8
Patch by Kostya Serebryany.
unique_ptr would be nice, but it's a bit too much work for an area I'm
not familiar with, nor invested in, unfortunately.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207265 91177308-0d34-0410-b5e6-96231b3b80d8
It's fishy to be changing the `std::vector<>` owned by the iterator, and
no one actual does it, so I'm going to remove the ability in a
subsequent commit. First, update the users.
<rdar://problem/14292693>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207252 91177308-0d34-0410-b5e6-96231b3b80d8
Should fix PR19526.
When Oscar added this code in the intial CMake build system port, he had
a TODO saying that ${CMAKE_SHARED_LINKER_FLAGS} was probably wrong. I
agree. I'm using ${CMAKE_CXX_LINK_FLAGS} to point LLVM at my custom
installation of gcc 4.recent, so that seems more correct. With this
change, I can build creduce against an installed clang, and it picks up
the write flags from --ldflags.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207171 91177308-0d34-0410-b5e6-96231b3b80d8
GCOV provides an option to prepend output file names with the source
file name, to disambiguate between covered data that's included from
multiple sources. Add a flag to llvm-cov that does the same.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207035 91177308-0d34-0410-b5e6-96231b3b80d8
For now it contains a single flag, SanitizeAddress, which enables
AddressSanitizer instrumentation of inline assembly.
Patch by Yuri Gorshenin.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206971 91177308-0d34-0410-b5e6-96231b3b80d8
behavior based on other files defining DEBUG_TYPE, which means it cannot
define DEBUG_TYPE at all. This is actually better IMO as it forces folks
to define relevant DEBUG_TYPEs for their files. However, it requires all
files that currently use DEBUG(...) to define a DEBUG_TYPE if they don't
already. I've updated all such files in LLVM and will do the same for
other upstream projects.
This still leaves one important change in how LLVM uses the DEBUG_TYPE
macro going forward: we need to only define the macro *after* header
files have been #include-ed. Previously, this wasn't possible because
Debug.h required the macro to be pre-defined. This commit removes that.
By defining DEBUG_TYPE after the includes two things are fixed:
- Header files that need to provide a DEBUG_TYPE for some inline code
can do so by defining the macro before their inline code and undef-ing
it afterward so the macro does not escape.
- We no longer have rampant ODR violations due to including headers with
different DEBUG_TYPE definitions. This may be mostly an academic
violation today, but with modules these types of violations are easy
to check for and potentially very relevant.
Where necessary to suppor headers with DEBUG_TYPE, I have moved the
definitions below the includes in this commit. I plan to move the rest
of the DEBUG_TYPE macros in LLVM in subsequent commits; this one is big
enough.
The comments in Debug.h, which were hilariously out of date already,
have been updated to reflect the recommended practice going forward.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206822 91177308-0d34-0410-b5e6-96231b3b80d8
We normally don't drop functions from the C API's, but in this case I think we
can:
* The old implementation of getFileOffset was fairly broken
* The introduction of LLVMGetSymbolFileOffset was itself a C api breaking
change as it removed LLVMGetSymbolOffset.
* It is an incredibly specialized use case. The only reason MCJIT needs it is
because of its odd position of being a dynamic linker of .o files.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206750 91177308-0d34-0410-b5e6-96231b3b80d8
LazyCallGraph analysis framework. Wire it up all the way through the opt
driver and add some very basic testing that we can build pass pipelines
including these components. Still a lot more to do in terms of testing
that all of this works, but the basic pieces are here.
There is a *lot* of boiler plate here. It's something I'm going to
actively look at reducing, but I don't have any immediate ideas that
don't end up making the code terribly complex in order to fold away the
boilerplate. Until I figure out something to minimize the boilerplate,
almost all of this is based on the code for the existing pass managers,
copied and heavily adjusted to suit the needs of the CGSCC pass
management layer.
The actual CG management still has a bunch of FIXMEs in it. Notably, we
don't do *any* updating of the CG as it is potentially invalidated.
I wanted to get this in place to motivate the new analysis, and add
update APIs to the analysis and the pass management layers in concert to
make sure that the *right* APIs are present.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206745 91177308-0d34-0410-b5e6-96231b3b80d8
file. This will make it easy to scale up the number of passes supported.
Currently, it just supports the function and module transformation
passes that were already supported in the opt tool explicitly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206737 91177308-0d34-0410-b5e6-96231b3b80d8
This adds support for an indexed instrumentation based profiling
format, which is just a small header and an on disk hash table. This
format will be used by clang's -fprofile-instr-use= for PGO.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206656 91177308-0d34-0410-b5e6-96231b3b80d8
Immutable DILineInfo doesn't bring any benefits and complicates
code. Also, use std::string instead of SmallString<16> for file
and function names - their length can vary significantly.
No functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206654 91177308-0d34-0410-b5e6-96231b3b80d8
Still only 32-bit ARM using it at this stage, but the promotion allows
direct testing via opt and is a reasonably self-contained patch on the
way to switching ARM64.
At this point, other targets should be able to make use of it without
too much difficulty if they want. (See ARM64 commit coming soon for an
example).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206485 91177308-0d34-0410-b5e6-96231b3b80d8
Since LLVM currently only supports WinCOFF, assume that the input is WinCOFF
rather than another type of COFF file (ECOFF/XCOFF). If the architecture is
detected as thumb (e.g. the file has a IMAGE_FILE_MACHINE_ARMNT magic) then use
a triple of thumbv7-windows.
This allows for objdump to properly handle WoA object files without having to
specify the target triple manually.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206446 91177308-0d34-0410-b5e6-96231b3b80d8
Implement DebugInfoVerifier, which steals verification relying on
DebugInfoFinder from Verifier.
- Adds LegacyDebugInfoVerifierPassPass, a ModulePass which wraps
DebugInfoVerifier. Uses -verify-di command-line flag.
- Change verifyModule() to invoke DebugInfoVerifier as well as
Verifier.
- Add a call to createDebugInfoVerifierPass() wherever there was a
call to createVerifierPass().
This implementation as a module pass should sidestep efficiency issues,
allowing us to turn debug info verification back on.
<rdar://problem/15500563>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206300 91177308-0d34-0410-b5e6-96231b3b80d8
This patch re-introduces the MCContext member that was removed from
MCDisassembler in r206063, and requires that an MCContext be passed in at
MCDisassembler construction time. (Previously the MCContext member had been
initialized in an ad-hoc fashion after construction). The MCCContext member
can be used by MCDisassembler sub-classes to construct constant or
target-specific MCExprs.
This patch updates disassemblers for in-tree targets, and provides the
MCRegisterInfo instance that some disassemblers were using through the
MCContext (previously those backends were constructing their own
MCRegisterInfo instances).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206241 91177308-0d34-0410-b5e6-96231b3b80d8
Once the auxiliary fields relating to the filename have been inspected, any
following auxiliary fields need not be visited as they have been consumed (the
following fields comprise the filepath as a single unit).
Adjust the test to catch this even if ASAN is not enabled.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206190 91177308-0d34-0410-b5e6-96231b3b80d8
Rather than switching behaviour on whether a previous symbol has an auxiliary
symbol record for the next count of elements, simply iterate over the auxiliary
symbols right after processing the current symbol entry. This makes the
behaviour much simpler to follow and similar to llvm-readobj and yaml2obj.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206146 91177308-0d34-0410-b5e6-96231b3b80d8
If a filename is a multiple of 18 characters, there will be no null-terminator.
This will result in an invalid access by the constructed StringRef. Add a test
case to exercise this and fix that handling. Address this same vulnerability in
llvm-readobj as well.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206145 91177308-0d34-0410-b5e6-96231b3b80d8