We have patterns for vector sext and zext operations but were missing
anyext. Without those patterns, codegen will fail when the selection DAG
has any_extend nodes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@148568 91177308-0d34-0410-b5e6-96231b3b80d8
For bit patterns that aren't representable using the 8-bit floating point
representation for vmov.f32, but are representable via vmov.i32, treat
the .f32 syntax as an alias. Most importantly, this covers the case
'vmov.f32 Vd, #0.0'.
rdar://10616677
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@148556 91177308-0d34-0410-b5e6-96231b3b80d8
to instruction right after the last instruction in the bundle.
- Add a finalizeBundle() variant that doesn't specify LastMI. Instead, the code
will find the last instruction in the bundle by following the 'InsideBundle'
marker. This is useful in case bundles are formed early (i.e. during MI
scheduling) but finalized later (i.e. after register allocator has finished
rewriting virtual registers with physical registers).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@148444 91177308-0d34-0410-b5e6-96231b3b80d8
This is similar to implicit register operands. MC doesn't understand
register liveness and call clobbers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@148437 91177308-0d34-0410-b5e6-96231b3b80d8
If the fixup is out of range for the Thumb1 instruction, relax it
to the Thumb2 encoding instead.
rdar://10711829
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@148424 91177308-0d34-0410-b5e6-96231b3b80d8
Load/store instructions w/ a fixup to be relative a function marked as thumb
don't use the low bit to specify thumb vs. non-thumb like interworking
branches do, so don't set it when dealing with those fixups.
rdar://10348687.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@148366 91177308-0d34-0410-b5e6-96231b3b80d8
When set, this bit indicates that a register is completely defined by
the value of its sub-registers.
Use the CoveredBySubRegs property to infer which super-registers are
call-preserved given a list of callee-saved registers. For example, the
ARM registers D8-D15 are callee-saved. This now automatically implies
that Q4-Q7 are call-preserved.
Conversely, Win64 callees save XMM6-XMM15, but the corresponding
YMM6-YMM15 registers are not call-preserved because they are not fully
defined by their sub-registers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@148363 91177308-0d34-0410-b5e6-96231b3b80d8
(This time I believe I've checked all the -Wreturn-type warnings from GCC & added the couple of llvm_unreachables necessary to silence them. If I've missed any, I'll happily fix them as soon as I know about them)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@148262 91177308-0d34-0410-b5e6-96231b3b80d8
live across BBs before register allocation. This miscompiled 197.parser
when a cmp + b are optimized to a cbnz instruction even though the CPSR def
is live-in a successor.
cbnz r6, LBB89_12
...
LBB89_12:
ble LBB89_1
The fix consists of two parts. 1) Teach LiveVariables that some unallocatable
registers might be liveouts so don't mark their last use as kill if they are.
2) ARM constantpool island pass shouldn't form cbz / cbnz if the conditional
branch does not kill CPSR.
rdar://10676853
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@148168 91177308-0d34-0410-b5e6-96231b3b80d8
The QQ and QQQQ registers are not 'real', they are pseudo-registers used
to model some vld and vst instructions.
This makes the call clobber lists longer, but I intend to get rid of
those soon.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@148151 91177308-0d34-0410-b5e6-96231b3b80d8
Allow LDRD to be formed from pairs with different LDR encodings. This was the original intention of the pass. Somewhere along the way, the LDR opcodes were refined which broke the optimization. We really don't care what the original opcodes are as long as they both map to the same LDRD and the immediate still fits.
Fixes rdar://10435045 ARMLoadStoreOptimization cannot handle mixed LDRi8/LDRi12
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147922 91177308-0d34-0410-b5e6-96231b3b80d8
This function runs after all constant islands have been placed, and may
shrink some instructions to their 2-byte forms. This can actually cause
some constant pool entries to move out of range because of growing
alignment padding.
Treat instructions that may be shrunk the same as inline asm - they
erode the known alignment bits.
Also reinstate an old assertion in verify(). It is correct now that
basic block offsets include alignments.
Add a single large test case that will hopefully exercise many parts of
the constant island pass.
<rdar://problem/10670199>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147885 91177308-0d34-0410-b5e6-96231b3b80d8
On Thumb, the displacement computation hardware uses the address of the
current instruction rouned down to a multiple of 4. Include this
rounding in the UserOffset we compute for each instruction.
When inline asm is present, the instruction alignment may not be known.
Constrain the maximum displacement instead in that case.
This makes it possible for CreateNewWater() and OffsetIsInRange() to
agree about the valid displacements. When they disagree, infinite
looping happens.
As always, test cases for this stuff are insane.
<rdar://problem/10660175>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147825 91177308-0d34-0410-b5e6-96231b3b80d8
The pass is prone to looping, and it is better to crash than loop
forever, even in a -Asserts build.
<rdar://problem/10660175>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147806 91177308-0d34-0410-b5e6-96231b3b80d8
This enables basic local CSE, giving us 20% smaller code for
consumer-typeset in -O0 builds.
<rdar://problem/10658692>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147720 91177308-0d34-0410-b5e6-96231b3b80d8
exposed with an upcoming change will would delete the copy to return register
because there is no use! It's amazing anything works.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147715 91177308-0d34-0410-b5e6-96231b3b80d8
This eliminates a lot of constant pool entries for -O0 builds of code
with many global variable accesses.
This speeds up -O0 codegen of consumer-typeset by 2x because the
constant island pass no longer has to look at thousands of constant pool
entries.
<rdar://problem/10629774>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147712 91177308-0d34-0410-b5e6-96231b3b80d8
Now that canRealignStack() understands frozen reserved registers, it is
safe to use it for aligned spill instructions.
It will only return true if the registers reserved at the beginning of
register allocation allow for dynamic stack realignment.
<rdar://problem/10625436>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147579 91177308-0d34-0410-b5e6-96231b3b80d8
Once register allocation has started the reserved registers are frozen.
Fix the ARM canRealignStack() hook to respect the frozen register state.
Now the hook returns false if register allocation was started with frame
pointer elimination enabled.
It also returns false if register allocation started without a reserved
base pointer, and stack realignment would require a base pointer. This
bug was breaking oggenc on armv6.
No test case, an upcoming patch will use this functionality to realign
the stack for spill slots when possible.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147578 91177308-0d34-0410-b5e6-96231b3b80d8
This patch caused a miscompilation of oggenc because a frame pointer was
suddenly needed halfway through register allocation.
<rdar://problem/10625436>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147487 91177308-0d34-0410-b5e6-96231b3b80d8
If anybody has strong feelings about 'default: assert(0 && "blah")' vs
'default: llvm_unreachable("blah")', feel free to regularize the instances of
each in this file.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147459 91177308-0d34-0410-b5e6-96231b3b80d8
